Visualization and laser measurements on the flow field and sand movement on sand dunes with porous fences

The installation of windbreak sand fences around sand dunes is one of the most promising methods to suppress windblown sand movement. In the study reported in this paper, we investigated the influence and validity of a small fence mounted on a model sand dune, in order to understand the fence’s suppression mechanism on the sand movement. The flow field around the dune and the process of sand-dune erosion were measured using LDV, PIV, and laser-sheet visualization techniques. A non-porous fence was found to suppress sand movements in its upstream area, but to enhance erosion downstream of the fence. This intensive erosion was caused by separated shear flow from the leading edge of the fence. In this study, four levels of porosity rate of the fence were tested. The fence-porosity dependences of the turbulent flow field and the erosion were discussed. The shapes of eroded sand dunes were found to depend on the porosity rate. The relationship between the sand-dune erosion and the flow field around the dune was illustrated with schematic diagrams. We concluded that the most desirable fence porosity should be 30% in order to avoid dune erosion if installed at a middle height on the stoss surface of a dune. This porosity provides a mean velocity reduction with avoiding a separated flow, although the flow bleeding through the porous fence is accompanied by grid turbulence and induces serious erosion in a narrow space behind the fence. Furthermore, we confirmed that the empirical correlation of the critical friction velocity can be applied to sand movements influenced by a fence.     

Derivation of a second-order model for Reynolds stress using renormalization group analysis and the two-scale expansion technique

With the two-scale expansion technique proposed by Yoshizawa,the turbulent fluctuating field is expanded around the isotropic field.At a low-order two-scale expansion,applying the mode coupling approximation in the Yakhot-Orszag renormalization group method to analyze the fluctuating field,the Reynolds-average terms in the Reynolds stress transport equation,such as the convective term,the pressure-gradient-velocity correlation term and the dissipation term,are modeled.Two numerical examples:turbulent flow past a backward-facing step and the fully developed flow in a rotating channel,are presented for testing the efficiency of the proposed second-order model.For these two numerical examples,the proposed model performs as well as the Gibson-Launder (GL) model,giving better prediction than the standard k-ε model,especially in the abilities to calculate the secondary flow in the backward-facing step flow and to capture the asymmetric turbulent structure caused by frame rotation.     

Finite element modelling of local scour below a pipeline under steady currents

Local scour has been identified as the main factor that causes failures of structures in offshore engineering. Numerous research efforts have been devoted to local scour around offshore pipelines in the past. In this paper, a finite element numerical model is established for simulating local scour below offshore pipelines in steady currents. The flow is simulated by solving the unsteady Reynolds-averaged Navier–Stokes equations with a standard k ? ? turbulent model closure. A sand slide scheme is proposed for the scour calculation, and bed load is considered in the proposed scour model. To account for changes in bed level, the moving mesh method is adopted to capture the water–sediment interface (bed), and the change of bed level is calculated by solving Exner–Polya equation. All the equations are discretised within the two-step Taylor–Galerkin algorithm in this paper. It is found that the sand slide model works well for the simulation of the scour, and the numerical results are shown to be in good agreement with the available experimental data.     

Parallel large eddy simulation of turbulent flow around MIRA model using linear equal‐order finite element method

A parallel large eddy simulation code that adopts domain decomposition method has been developed for large‐scale computation of turbulent flows around an arbitrarily shaped body. For the temporal integration of the unsteady incompressible Navier–Stokes equation, fractional 4‐step splitting algorithm is adopted, and for the modelling of small eddies in turbulent flows, the Smagorinsky model is used. For the parallelization of the code, METIS and Message Passing Interface Libraries are used, respectively, to partition the computational domain and to communicate data between processors. To validate the parallel architecture and to estimate its performance, a three‐dimensional laminar driven cavity flow inside a cubical enclosure has been solved. To validate the turbulence calculation, the turbulent channel flows at Re_τ = 180 and 1050 are simulated and compared with previous results. Then, a backward facing step flow is solved and compared with a DNS result for overall code validation. Finally, the turbulent flow around MIRA model at Re = 2.6 × 10⁶ is simulated by using approximately 6.7 million nodes. Scalability curve obtained from this simulation shows that scalable results are obtained. The calculated drag coefficient agrees better with the experimental result than those previously obtained by using two‐equation turbulence models. Copyright © 2007 John Wiley & Sons, Ltd.     

A non‐linear k–ε model with realizability for prediction of flows around bluff bodies

The incompressible flow around bluff bodies (a square cylinder and a cube) is investigated numerically using turbulence models. A non‐linear k–ε model, which can take into account the anisotropy of turbulence with less CPU time and computer memory then RSM or LES, is adopted as a turbulence model. In tuning of the model coefficients of the non‐linear terms are adjusted through the examination of previous experimental studies in simple shear flows. For the tuning of the coefficient in the eddy viscosity (=C_μ), the realizability constraints are derived in three types of basic 2D flow patterns, namely, a simple shear flow, flow around a saddle and a focal point. C_μ is then determined as a function of the strain and rotation parameters to satisfy the realizability. The turbulence model is first applied to a 2D flow around a square cylinder and the model performance for unsteady flows is examined focussing on the period and the amplitude of the flow oscillation induced by Karman vortex shedding. The applicability of the model to 3D flows is examined through the computation of the flow around a surface‐mounted cubic obstacle. The numerical results show that the present model performs satisfactorily to reproduce complex turbulent flows around bluff bodies. Copyright © 2003 John Wiley & Sons, Ltd.     

Incompressible Roe‐like scheme for turbulent flows

In the current study, numerical investigation of incompressible turbulent flow is presented. By the artificial compressibility method, momentum and continuity equations are coupled. Considering Reynolds averaged Navier–Stokes equations, the Spalart–Allmaras turbulence model, which has accurate results in two‐dimensional problems, is used to calculate Reynolds stresses. For convective fluxes a Roe‐like scheme is proposed for the steady Reynolds averaged Navier–Stokes equations. Also, Jameson averaging method was implemented. In comparison, the proposed characteristics‐based upwind incompressible turbulent Roe‐like scheme, demonstrated very accurate results, high stability, and fast convergence. The fifth‐order Runge–Kutta scheme is used for time discretization. The local time stepping and implicit residual smoothing were applied as the convergence acceleration techniques. Suitable boundary conditions have been implemented considering flow behavior. The problem has been studied at high Reynolds numbers for cross flow around the horizontal circular cylinder and NACA0012 hydrofoil. Results were compared with those of others and a good agreement has been observed. Copyright © 2012 John Wiley & Sons, Ltd.     

Calculation of turbulent fluid flow and heat transfer in ducts by a full Reynolds stress model

A computational method has been developed to predict the turbulent Reynolds stresses and turbulent heat fluxes in ducts by different turbulence models. The turbulent Reynolds stresses and other turbulent flow quantities are predicted with a full Reynolds stress model (RSM). The turbulent heat fluxes are modelled by a SED concept, the GGDH and the WET methods. Two wall functions are used, one for the velocity field and one for the temperature field. All the models are implemented for an arbitrary three‐dimensional channel. Fully developed condition is achieved by imposing cyclic boundary conditions in the main flow direction. The numerical approach is based on the finite volume technique with a non‐staggered grid arrangement. The pressure–velocity coupling is handled by using the SIMPLEC‐algorithm. The convective terms are treated by the van Leer scheme while the diffusive terms are handled by the central‐difference scheme. The hybrid scheme is used for solving the ε equation. The secondary flow generation using the RSM model is compared with a non‐linear k–ε model (non‐linear eddy viscosity model). The overall comparison between the models is presented in terms of the friction factor and Nusselt number. Copyright © 2003 John Wiley & Sons, Ltd.     

Implementation of physical boundary conditions into computational domain in modelling of oscillatory bottom boundary layers

This paper discusses the importance of realistic implementation of the physical boundary conditions into computational domain for the simulation of the oscillatory turbulent boundary layer flow over smooth and rough flat beds. A mathematical model composed of the Reynolds averaged Navier–Stokes equation, turbulent kinetic energy (k) and dissipation rate of the turbulent kinetic energy (ε) has been developed. Control‐volume approach is used to discretize the governing equations to facilitate the numerical solution. Non‐slip condition is imposed on the bottom surface, and irrotational main flow properties are applied to the upper boundary. The turbulent kinetic energy is zero at the bottom, whereas the dissipation rate is approaching to a constant value, which is proportional to the kinematic viscosity times the second derivative of the turbulent kinetic energy. The output of the model is compared with the available experimental studies conducted in oscillatory tunnels and wave flume. It is observed that the irrotational flow assumption at the upper boundary is not realistic in case of water tunnels. Therefore, new upper boundary conditions are proposed for oscillatory tunnels. The data of wave flume show good agreement with the proposed numerical model. Additionally, several factors such as grid aspect ratio, staggered grid arrangement, time‐marching scheme and convergence criteria that are important to obtain a robust, realistic and stable code are discussed. Copyright © 2009 John Wiley & Sons, Ltd.     

Control volume finite element solution of confined turbulent swirling flows

A control volume finite element method that uses a triangular grid has been applied for solving confined turbulent swirling flows. To treat the velocity-pressure coupling, the vorticity-streamfunction formulation has been used. For turbulence effects the k-? model has been adopted. Consistent with the use of wall functions in the near-wall regions, a boundary condition for the calculation of the vorticity at computational boundaries is proposed and used effectively. The discretized equations are obtained by making use of an exponential interpolation function. Its use has been beneficial in reducing numerical diffusion. Comparisons of the current predictions with available experimental and numerical data from the literature showed generally fair agreement.     

Applications of a higher‐order bounded numerical scheme to turbulent flows

This paper applies the higher‐order bounded numerical scheme Weighted Average Coefficients Ensuring Boundedness (WACEB) to simulate two‐ and three‐dimensional turbulent flows. In the scheme, a weighted average formulation is used for interpolating the variables at cell faces and the weighted average coefficients are determined from a normalized variable formulation and total variation diminishing (TVD) constraints to ensure the boundedness of the solution. The scheme is applied to two turbulent flow problems: (1) two‐dimensional turbulent flow around a blunt plate; and (2) three‐dimensional turbulent flow inside a mildly curved U‐bend. In the present study, turbulence is evaluated by using a low‐Reynolds number version of the k–ω model. For the flow simulation, the QUICK scheme is applied to the momentum equations while either the WACEB scheme (Method 1) or the UPWIND scheme (Method 2) is used for the turbulence equations. The present study shows that the WACEB scheme has at least second‐order accuracy while ensuring boundedness of the solutions. The present numerical study for a pure convection problem shows that the ‘TVD’ slope ranges from 2 to 4. For the turbulent recirculating flow, two different mixed procedures (Method 1 and Method 2) produce a substantial difference for the mean velocities as well as for the turbulence kinetic energy. Method 1 predicts better results than Method 2 does, comparing the analytical solution and the experimental data. For the turbulent flow inside the mildly curved U‐bend, although the predictions of velocity distributions with two procedures are very close, a noticeable difference of turbulence kinetic energy is exhibited. It is noticed that the discrepancy exists between numerical results and the experimental data. The reason is the limit of the two‐equation turbulence model to such complex turbulent flows with extra strain‐rates. Copyright © 2001 John Wiley & Sons, Ltd.     

圆柱周围湍流和含沙多相流的SPH数值模拟

湍流和多相流是流体力学中最具挑战性的两个主题,湍流多相流的实验和数值模拟更是一项艰巨的挑战。此外,对颗粒干沉积方面的多相流、多尺度、多物理耦合特征的风沙流的综合实地观测仍然很少。因此,本文综合考虑湍流、多相流与多物理耦合等方面,采用以圆柱为干扰物产生对流涡流的强制干扰技术,以塔克拉玛干沙漠地带中和田至若羌铁路的过沙桥桥墩为研究背景。为摆脱有限元软件中由网格大变形或失真引起的各种问题,采用SPH方法的宏观界面追踪和微观单点追踪相结合的方式,初步揭示了以单相对流涡流为风场背景的含沙多相流环境下的圆柱周围复杂的流场变化以及对颗粒干沉积运动的影响。采用数值模拟与现场实验相结合的方式,着重对计算域边界壁面和圆柱壁面对空气单相流中对流涡流的成形运动及其特征分析、两相流中对流涡流在圆柱周围的夹沙运动模拟及其特性分析、两相流中对流涡流的夹沙率以及边界壁湍流对沙粒干沉积效率展开分析研究。     

Computation of three‐dimensional flow around square and circular piers

The aim of the present study is to investigate, by numerical simulation, the three‐dimensional turbulent flow field around square and circular piers. The numerical model employs a finite volume method based on MacCormack's explicit predictor–corrector scheme to solve weakly compressible hydrodynamic equations for turbulent flow. Computed results are compared with Dargahi's experimental measurements to assess the validity of the proposed model. Very good agreements are obtained. The results of flow simulation indicate that near the upstream face of the pier there exists a downflow, which joins the separated flow to form the horseshoe vortex stretched around the pier. This horseshoe vortex interacts with the wake vortex to create the upflow behind the pier. These phenomena appear to be very important to the mechanism of scouring around the pier. In general, the flow patterns for the square and circular piers are similar. However, the strengths of the downflow and horseshoe vortex are greater in the case of the square pier. The position of the horseshoe vortex around the circular pier is closer to the front face than that around the square pier. In the meantime, the domain of the wake flow in the case of the square pier is greater than that in the case of the circular one. Copyright © 2000 John Wiley & Sons, Ltd.     

A gas‐kinetic scheme for the simulation of turbulent flows on unstructured meshes

This paper presents a numerical method for simulating turbulent flows via coupling the Boltzmann BGK equation with Spalart–Allmaras one equation turbulence model. Both the Boltzmann BGK equation and the turbulence model equation are carried out using the finite volume method on unstructured meshes, which is different from previous works on structured grid. The application of the gas‐kinetic scheme is extended to the simulation of turbulent flows with arbitrary geometries. The adaptive mesh refinement technique is also adopted to reduce the computational cost and improve the efficiency of meshes. To organize the unstructured mesh data structure efficiently, a non‐manifold hybrid mesh data structure is extended for polygonal cells. Numerical experiments are performed on incompressible flow over a smooth flat plate and compressible turbulent flows around a NACA 0012 airfoil using unstructured hybrid meshes. These numerical results are found to be in good agreement with experimental data and/or other numerical solutions, demonstrating the applicability of the proposed method to simulate both subsonic and transonic turbulent flows. Copyright © 2016 John Wiley & Sons, Ltd.     

强吸气旋转圆筒壁面湍流边界层建模及计算

提出了湍流边界层的一种简单、快速计算方法, 用以求解强吸气作用下旋转圆筒表面边界层流动. 首先, 理论分析了同心圆筒间的旋转流体运动, 外筒静止、内筒旋转且为多孔吸气条件. 强吸气情况下旋转流动主要表现为内筒壁面附近的边界层流动, 基于这一事实得到了周向速度分布的解析表达式. 其次, 通过引入新参数扩展Cebeci-Smith代数湍流模型, 使其能考虑流线曲率、壁面吸气、低Reynolds数效应等因素. 针对这些因素的综合影响, 采用解析修正和经验参数对模型进行调整. 同时, 基于Reynolds应力湍流模型的仿真结果, 校准代数湍流模型中的经验参数. 最后, 给出基于广义Cebeci-Smith湍流模型的旋转壁面边界层流动的迭代算法, 该算法适用于需要特殊迭代过程的轴向及周向流动均匀情况. 计算了不同旋转速度和吸气强度组合工况下的边界层流动, 其周向速度和湍流强度分布与基于Reynolds应力湍流模型的计算结果非常接近. 并且表明, 当Reynolds应力湍流模型数值模拟预测内筒边界层为稳定层流时, 该方法也再现了相同初始条件下的层流边界层.      

Introduction of turbulent model in a mixed finite volume/finite element method

The aim of this work is to present a new numerical method to compute turbulent flows in complex configurations. With this in view, a k-? model with wall functions has been introduced in a mixed finite volume/finite element method. The numerical method has been developed to deal with compressible flows but is also able to compute nearly incompressible flows. The physical model and the numerical method are first described, then validation results for an incompressible flow over a backward-facing step and for a supersonic flow over a compression ramp are presented. Comparisons are performed with experimental data and with other numerical results. These simulations show the ability of the present method to predict turbulent flows, and this method will be applied to simulate complex industrial flows (flow inside the combustion chamber of gas turbine engines). The main goal of this paper is not to test turbulence models, but to show that this numerical method is a solid base to introduce more sophisticated turbulence model.     

MODELLING AND CALCULATION OF THE TURBULENT BOUNDARY LAYER ON A ROTATING CYLINDER SURFACE WITH STRONG SUCTION 1)

提出了湍流边界层的一种简单、快速计算方法, 用以求解强吸气作用下旋转圆筒表面边界层流动. 首先, 理论分析了同心圆筒间的旋转流体运动, 外筒静止、内筒旋转且为多孔吸气条件. 强吸气情况下旋转流动主要表现为内筒壁面附近的边界层流动, 基于这一事实得到了周向速度分布的解析表达式. 其次, 通过引入新参数扩展Cebeci-Smith代数湍流模型, 使其能考虑流线曲率、壁面吸气、低Reynolds数效应等因素. 针对这些因素的综合影响, 采用解析修正和经验参数对模型进行调整. 同时, 基于Reynolds应力湍流模型的仿真结果, 校准代数湍流模型中的经验参数. 最后, 给出基于广义Cebeci-Smith湍流模型的旋转壁面边界层流动的迭代算法, 该算法适用于需要特殊迭代过程的轴向及周向流动均匀情况. 计算了不同旋转速度和吸气强度组合工况下的边界层流动, 其周向速度和湍流强度分布与基于Reynolds应力湍流模型的计算结果非常接近. 并且表明, 当Reynolds应力湍流模型数值模拟预测内筒边界层为稳定层流时, 该方法也再现了相同初始条件下的层流边界层.     

Numerical simulation of turbulent free surface flow with two‐equation k–ε eddy‐viscosity models

This paper presents a finite difference technique for solving incompressible turbulent free surface fluid flow problems. The closure of the time‐averaged Navier–Stokes equations is achieved by using the two‐equation eddy‐viscosity model: the high‐Reynolds k–ε (standard) model, with a time scale proposed by Durbin; and a low‐Reynolds number form of the standard k–ε model, similar to that proposed by Yang and Shih. In order to achieve an accurate discretization of the non‐linear terms, a second/third‐order upwinding technique is adopted. The computational method is validated by applying it to the flat plate boundary layer problem and to impinging jet flows. The method is then applied to a turbulent planar jet flow beneath and parallel to a free surface. Computations show that the high‐Reynolds k–ε model yields favourable predictions both of the zero‐pressure‐gradient turbulent boundary layer on a flat plate and jet impingement flows. However, the results using the low‐Reynolds number form of the k–ε model are somewhat unsatisfactory. Copyright © 2004 John Wiley & Sons, Ltd.     

A two‐scale low‐Reynolds number turbulence model

In this study, a two‐scale low‐Reynolds number turbulence model is proposed. The Kolmogorov turbulence time scale, based on fluid kinematic viscosity and the dissipation rate of turbulent kinetic energy (ν, ε), is adopted to address the viscous effects and the rapid increasing of dissipation rate in the near‐wall region. As a wall is approached, the turbulence time scale transits smoothly from a turbulent kinetic energy based (k, ε) scale to a (ν, ε) scale. The damping functions of the low‐Reynolds number models can thus be simplified and the near‐wall turbulence characteristics, such as the ε distribution, are correctly reproduced. The proposed two‐scale low‐Reynolds number turbulence model is first examined in detail by predicting a two‐dimensional channel flow, and then it is applied to predict a backward‐facing step flow. Numerical results are compared with the direct numerical simulation (DNS) budgets, experimental data and the model results of Chien, and Lam and Bremhorst respectively. It is proved that the proposed two‐scale model indeed improves the predictions of the turbulent flows considered. Copyright © 2000 John Wiley & Sons, Ltd.     

Finite element computation of a turbulent flow over a two-dimensional backward-facing step

The present paper is devoted to the computation of turbulent flows by a Galerkin finite element method. Effects of turbulence on the mean field are taken into account by means of a (k-ε) turbulence model. The wall region is treated through wall laws and, more specifically, Reichardt's law. An inlet profile for ε is proposed as a numerical treatment for physically meaningless values of k and ε. Results obtained for a recirculating flow in a two-dimensional channel with a sudden expansion in width are presented and compared with experimental values.