Gas-phase pyrolysis in heterocyclic synthesis. Gas-phase elimination reactions of some substituted aminoazoles

Gas-phase pyrolyses of ethyl N-(5-cyanomethyl-1,3,4-thiadiazol-3-yl)carbamate ( 1 ), 1-benzoyl-3-(3-methylpyrazol-5-yl)thiourea ( 2 ), 1-benzoyl-3-(5-methylisoxazol-3-yl)thiourea ( 3 ), and 1-acetyl-3-(3-phenyl-pyrazol-5-yl)thiourea ( 4 ) have been studied. These reactions were homogeneous and unimolecular. The kinetics obeyed the first-order rate equation. Utilization of this pyrolytic reaction in heterocyclic synthesis is considered, and mechanistic information has been obtained from kinetic data and product analysis using an on-line pyrolysis GC-MS technique. The physical constants of four new substituted aminoazoles are also described. © 1997 John Wiley & Sons, Inc.     

Synthesis and reactions of [tris(trimethylsilyl)methyl]ethyl dichlorosilane

The crowded dichlorosilane TsiSiEtCl₂, (1), (Tsi = (Me₃Si)₃C) was prepared from the reaction between EtSiCl₃ and TsiLi, then it was reduced with LiAlH₄ to give TsiSiEtH₂, (2). The hydride (2) was then treated with two equivalents of ICl/CCl₄ or Br₂/CCl₄ to produce TsiSiEtI₂, (3), and TsiSiEtBr₂, (4), respectively. The reaction of compound (2) with one equivalent of ICl/CCl₄ gives TsiSiEtHI, (5). This product reacted with H₂O/dioxane in the presence of AgClO₄ or with dry MeOH to produce TsiSiEtHOH, (6), and TsiSiEtHOMe, (7), respectively. The compound (3) reacted with H₂O in DMSO/CH₃CN to give TsiSiEt(OH)₂, (8), and the compound TsiSiEtIOMe, (9), was prepared from the reaction of the compound (7) with ICl/CCl₄. When the dichloride (1) was treated with NaOMe/MeOH it gave (Me₃Si)₂CHSiEt(OMe)₂. It is suggested that the reaction proceeds through an elimination-addition mechanism. The dichloride (1) was also treated with KSCN, NaN₃ or NaOCN in CH₃CN to give S_N2 substitution products. All the new products were characterized by FTIR, ¹H NMR, and ¹³C NMR spectroscopy, mass spectrometry and elemental analysis.     

Gas-phase kinetics of elimination reactions of pentane-2,4-dione derivatives. Part ii [1]. Thermolysis of derivatives and analogues of 3-phenylhydrazonopentane-2,4-dione

Six analogues and derivatives (1–6) of 3-phenylhydrazonopentane-2,4-dione (7) were subjected to gas-phase thermolysis. The Arrhenius log A (s⁻¹) and Ea (kJ mol⁻¹) of the analogues (1–5) are, respectively: 10.42 and 140.8 for 1-cyano-1-phenyl-hydrazonopropanone (1) , 11.19 and 135.4 for 1-cyano-1-( -nitrophenylhydrazono)-propanone (2) , 10.68 and 144.9 for 1-cyano-1-( -methoxyphenylhydrazono)propanone (3) , 11.76 and 137.8 for 1-cyano-3-phenyl-1-phenylhydrazonopropanone (4) , and 11.29 and 145.9 for 1-cyano-1-phenylhydrazonobutanone (5) . The corresponding values for ethyl 3-oxo-2-phenylhydrazonobutanoate (6) are 11.90 s⁻¹ and 143.3 kJ mol⁻¹. The rates of reaction at 600 K are compared with those of the title diketone (7) and of pentane-2,4-dione (8) and rationalized in terms of a plausible elimination pathway involving a semiconcerted six-membered transition state. © 1998 John Wiley & Sons, Inc. Int J Chem Kinet: 30: 457–462, 1998     

First synthesis of 2-[alkylamino(diethoxyphosphoryl)methyl]acrylic ethyl esters

The ethyl α-bromomethyl-β-(diethoxyphosphoryl)acrylic acid ester 9 has been prepared by addition of bromine to allylphosphonate 7 then dehydrobromination with DBU in acetonitrile. Reaction of allylic bromide 9 with primary amines in a bimolecular S_N2′-type mecanism in methanol at low temperature, gives rise to the 2-[alkylamino(diethoxyphosphoryl)methyl]acrylic acid ethyl esters 6.     

Gas-phase synthesis of the homo and hetero organocuprate anions [MeCuMe]-, [EtCuEt]-, and [MeCuR]-

The homocuprates [MeCuMe]- and [EtCuEt]- were generated in the gas phase by double decarboxylation of the copper carboxylate centers [MeCO2CuO2CMe]- and [EtCO2CuO2CEt]-, respectively. The same strategy was explored for generating the heterocuprates [MeCuR]- from [MeCO2CuO2CR]- (R = Et, Pr, iPr, tBu, allyl, benzyl, Ph). The formation of these organocuprates was examined by multistage mass spectrometry experiments, including collision-induced dissociation and ion-molecule reactions, and theoretically by density functional theory. A number of side reactions were observed to be in competition with the second stage of decarboxylation, including loss of the anionic carboxylate ligand and loss of neutral alkene via beta-hydride transfer elimination. Interpretation of decarboxylation of the heterocarboxylates [MeCO2CuO2CR]- was more complex because of the possibility of decarboxylation occurring at either of the two different carboxylate ligands and giving rise to the possible isomers [MeCuO2CR]- or [MeCO2CuR]-. Ion-molecule reactions of the products of initial decarboxylation with allyl iodide resulted in C-C coupling to produce the ionic products [ICuO2CR]- or [MeCO2CuI]-, which provided insights into the relative population of the isomers, and indicated that the site of decarboxylation was dependent on R. For example, [MeCO2CuO2CtBu]- underwent decarboxylation at MeCO2- to give [MeCuO2CtBu]-, while [MeCO2CuO2CCH2Ph]- underwent decarboxylation at PhCH2CO2- to give [MeCO2CuCH2Ph]-. Each of the heterocuprates [MeCuR]- (R = Et, Pr, iPr, allyl, benzyl, Ph) could be generated by the double decarboxylation strategy. However, when R = tBu, intermediate [MeCuO2CtBu]- only underwent loss of tBuCO2-, a consequence of the steric bulk of tBu disfavoring decarboxylation and stabilizing the competing channel of carboxylate anion loss. Detailed DFT calculations were carried out on the potential energy surfaces for the first and second decarboxylation reactions of all homo- and heterocuprates, as well as possible competing reactions. These reveal that in all cases the first decarboxylation reaction is favored over loss of the carboxylate ligand. In contrast, other reactions such as carboxylate ligand loss and beta-hydride transfer become more competitive with the second decarboxylation reaction.     

2-[1-(2,6-Dibenzhydryl-4-methylphenylimino)ethyl]-6-[1-(arylimino)ethyl]pyridylcobalt(II) dichlorides: synthesis, characterization and ethylene polymerization behavior

A series of unsymmetrical 2,6-bis(imino)pyridylcobalt(II) complexes, {2-[2,6-(CH(C(6)H(5))(2))(2)-4-Me-C(6)H(2)N==C(CH(3))]-6-(2,6-R(1)(2)-4-R(2)-C(6)H(2)N==CCH(3))-C(5)H(3)NCoCl(2)} where R(1) = Me, Et or (i)Pr, R(2) = H or Me, together with the new symmetrical complex 2,6-[2,6-(CH(C(6)H(5))(2))(2)-4-Me-C(6)H(2)N==C(CH(3))](2)-C(5)H(3)NCoCl(2), were synthesized. All of the compounds were fully characterized by (1)H NMR and IR spectroscopy, as well as by elemental analysis. The molecular structures of Co1 (R(1) = Me, R(2) = H) and Co5 (R(1) = Et, R(2) = Me) were further confirmed by single crystal X-ray diffraction, which indicated that the cobalt centres were penta-coordinate with a pseudo square-pyramidal geometry. Upon treatment with MAO or MMAO, these cobalt pre-catalysts exhibited higher activities than any previously reported cobalt pre-catalysts, with values as high as 4.64 × 10(6) g PE mol(-1)(Co) h(-1) for ethylene polymerization at atmospheric pressure. The polyethylenes obtained were of high molecular weight and narrow molecular weight distribution.     

Psilocin analogs. 1. Synthesis of 3-[2-(dialkylamino)ethyl] -and 3-[2-(cycloalkylamino)ethyl] indol-4-ols

The synthesis of four dialkyl and three eyeloalkyl analogs of psilocin (4, R - CH₃), a hallucinogenic principle found in certain fungi, is described. The synthetic route involves four transformations starting with 6,7-dihydroindol-4(5H)one: (1).     

Synthesis of [2-(vinyloxy)ethyl]uracil and [2-(allyloxy)ethyl]uracil

A synthesis is reported for N¹-mono- and N¹,N³-disubstituted uracil derivatives containing a terminal carbon-carbon double bond in the side-chain. Alkylation of vinyl 2-chloroethyl ether by uracil potassium salts leads to a mixture of 1-[2-(vinyloxy)ethyl] and 1,3-di[2-(vinyloxy)ethyl] derivatives while treatment of 2,4-bis(trimethylsilyloxy)pyrimidines by vinyl 2-chloroethyl ether leads exclusively to N¹-monosubstituted products. Alkylation of cytosine by this chloroether gave 1-[2-(vinyloxy)ethyl]cytosine. The synthesis of 1-[2-(allyloxy)ethyl]uracil derivatives was carried out by treatment of uracil potassium salts by 1-(allyloxy)-2-(p-toluenesulfonyloxy)ethane.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 393–397, March, 1993.     

Free radical chemistry. Part 6[1]. Halogenation of polyfluoro-ethers and -borate esters

Chlorination and bromination of CH₃OCH₂CF₂CFHCF₃ gave contrasting results for the site of halogenation and a rationalisation based on the lateness of the transition-state is advanced. Direct fluorination supports the theory. Chlorination of fluorinated trialkylborates provides a new route for conversion of fluorinated alkenes to fluorinated acid chlorides.     

Synthesis and polymerization of optically active L-[α-(N-p-acryloxybenzoyl)alanine ethyl esters]

New optically active monomers L -[α-(N-p-acryloxybenzoyl)alanine ethyl esters] (I) and their polymers were synthesized. The title monomers (I) were prepared by the reaction of 1-p-acryloxybenzoyloxy-4-chlorobenzotriazoles (II) with L -alanine ethyl ester hydrochloride, by aminolysis of the active monoester. The new typical active ester (II) was synthesized by the N-hydroxy compound active-ester methods in excellent yield. Before the synthesis of the optically active monomers was carried out, a model study of the aminolysis of the two active esters was performed.     

Synthesis of N-[2-(1-piperidinyl)ethyl]benzamides

Novel benzamide derivatives, N-[1-(aminocarbonyl)-2-(1-piperidinyl)ethyl]benzamides (4 and 5), were prepared from the reaction of beta-piperidinoalanine (6) as the starting material.