Structure and conformational equilibrium of thiacalix[4]arene by density functional theory

Density functional theory calculations for the structure and conformational equilibrium of thiacalix[4]arene are reported. The conformational equilibrium of thiacalix[4]arene, a heterocalixarene in which the phenol groups are bridged by sulphur atoms is compared to the conformational equilibrium of calix[4]arene. Thiacalix[4]arene conformational energies relative to the cone conformer (ΔE's) are reduced in comparison with calix[4]arene. This conformational change is in qualitative agreement with recent NMR spectroscopy measurements of the conformational equilibrium for a tetraethylether of thiacalix[4]arene in a CDCl₃ solution which indicates an enhanced chemical exchange of thiacalixarene conformers in comparison with similar methylene bridged structures. Density functional theory results for the structure of thiacalix[4]arene are in good agreement with recent X-ray diffraction measurements. The electrostatic potentials in the cone conformers of thiacalix[4]arene and calix[4]arene suggest that their complexation or recognition abilities can be significantly different. Dipole moments of the four thiacalix[4]arene conformers are in the order: cone>1,2-alternate>partial-cone>1,3-alternate.     

Bifunctional fluorescent thiacalix[4]arene based chemosensor for Cu and F ions

A new thiacalix[4]arene based fluorescent sensor bearing two dansyl groups has been synthesized in cone conformation. In CH₃CN:CH₂Cl₂ (1:1), the presence of Cu (II) induces the formation of a 1:1 metal:ligand complex, which exhibits increasing emission at 433 nm at the expense of the fluorescent emission of 1 centered at 504 nm. The detection limit of the sensor for Cu²⁺ is 2×10⁻⁷ mol L⁻¹. For anion sensing, 1 shows a high selectivity for fluoride ions over other anions tested.     

Comparative study on the transition metal complexes of a novel thiacalix[4]arene derivative

A comparative study on Zn²⁺ and Cu²⁺ complexes of the novel compound 5,11,17,23-tetra-tert-butyl-25,27-bis{[4-(methoxycarbonyl)phenyl]methoxy}-2,8,14,20-tetrathiacalix[4]arene, that possesses potential as a core unit for the construction of molecular receptors, is presented using semiempirical AM1 calculation. The possible structures of each metal complex and their corresponding energetic data are compared with the parent 5,11,17,23-tetra-tert-butyl-2,8,14,20-tetrathiacalix[4]arene. The complexation ability of both thiacalix[4]arenes towards the two metal ions is discussed on the basis of binding energies. Both thiacalix[4]arene 1:1 complexes show higher complexation ability towards Cu²⁺. However, 5,11,17,23-tetra-tert-butyl-25,27-bis{[4-(methoxycarbonyl)phenyl]methoxy}-2,8,14,20-tetrathiacalix[4]arene presents lower complexation ability when compared with the 5,11,17,23-tetra-tert-butyl-2,8,14,20-tetrathiacalix[4]arene. The results of liquid–liquid extraction experiments of the thiacalix[4]arenes are in good agreement with the theoretical calculations.     

(1+1) or (2+2) Coupling for bis(tosyloxyethoxy)benzenes with calix[4]arene and thiacalix[4]arene

As bifunctional reagents, bis(tosyloxyethoxy)benzenes can react with p-tert-butylcalix[4]arene or p-tert-butylthiacalix[4]arene to afford intramolecularly bridged (1+1) or intermolecularly bridged (2+2) products. It was found that the bridging pattern strongly depended on the structure of bis(tosyloxyethoxy)benzene and the kind of calixarene. For the ortho-isomer of bis(tosyloxyethoxy)benzene, intramolecularly bridged calix[4]arene and thiacalix[4]arene were the main products. For the para-isomer, the bridging reaction was in a (2+2) fashion. As for the meta-isomer, double thiacalix[4]arene and intramolecularly bridged calix[4]crown were synthesized.     

Monosubstituted lower rim thiacalix[4]arene derivatives

A clean and partially green route to monoalkyled thiacalix[4]arenes has been demonstrated. We have discovered that tetraalkylammonium halide can cleave selectively one of the two aryl alkyl ethers of dialkylated para-tert-butylthiacalix[4]arenes. Thus, p-tert-butyl thiacalix[4]arenes differently monoalkyled at the lower rim with acetyl, propyl, and benzyl group were synthesized in good yield.     

Synthesis of a deep-cavity thiacalix[4]arene

A novel thiacalix[4]arene derivative bearing four phenyl groups on the upper rim was prepared by the direct condensation of biphenyl-4-ol with elemental sulphur. As revealed by X-ray diffraction analysis, this compound adopts the cone conformation in the solid state, thus creating a cavity with an extended π-aromatic system potentially applicable for solid-state inclusion of suitable molecules. Subsequent alkylation (RI/K₂CO₃/acetone, R=Me, Et, Pr) yielded tetraalkylated derivatives, which were studied for their conformational preferences using ¹H NMR spectroscopy. While the Me or Et derivatives are conformationally mobile and exhibit thermodynamic equilibria of several conformers in solution (CDCl₃ or CD₂Cl₂), the corresponding propoxy derivative is infinitely stable at room temperature.     

Novel anion receptors based on thiacalix[4]arene derivatives

Starting from the thiacalix[4]arene tetraacetate, novel derivatives bearing four ureido or thioureido functions on the lower rim have been prepared. As proven by NMR titrations, these compounds can bind anions via hydrogen bonding interactions and represent the first example of anion receptors in the thiacalixarene series.     

Novel dendritic cores based on thiacalix[4]arene derivatives

Thiacalix[4]arenes possessing carboxylic groups were used for the design of potential dendritic cores with amino surface groups. The known tetraacetic acid in the 1,3-alternate conformation gave the desired product in very low yield because of steric hindrance on thiacalix[4]arene moiety. Therefore, synthetic strategy based on withdrawing of the carboxyl groups via benzylic spacer from the thiacalix[4]arene moiety was successfully applied for the realization of novel thiacalix[4]arenes bearing two or four protected lysine units.     

Comparative density functional theory study of the binding of ligands to Cu+ and Cu2+: Influence of the coordination and oxidation state

BP86, B3LYP and MP2 methods, generally used to study large systems containing transition metals, were compared for their ability to accuratly evaluate bond dissociation energies of copper complexes. Various [Cu-L]+ and [Cu-L]2+ complexes in which L are small ligands and the higher coordinated complexes, [Cu(NH3)(4)]+ and [Cu(NH3)4]2+ were studied. For monoligated complexes, the BDEs calculated by the three methods differed by 2 to 60 kcal/mol, the larger differences being obtained for [Cu-L]2+ complexes. The BDEs calculated using the B3LYP functional were in general close to the experimental values whereas the BDEs calculated using the BP86 functional were too high and the BDEs calculated using the MP2 were too low. If we rank the whole ligands according to their increased bond strength, the resulting orders obtained with the three methods are different for the [Cu-L]+ complexes, the B3LYP giving the same order as the experimental one. This result indicates that the BDEs of [Cu-L]+ complexes are better modeled using the B3LYP than using the BP86 and MP2 methods. For [Cu-L]2+, B3LYP also gave the most reliable results whereas BP86 gave too large BDEs and MP2 gave too small BDEs. However, symmetries of ground states can be different using DFT and post-Hartree-Fock methods. For [Cu-N2O]2+ the use of the B1LYP provides a better symmetry of the complex than the B3LYP, as has been recently shown in the literature for [Cu-H2O]2+. MP2 led to an incorrect bent structure for [Cu-N2]2+ in contrast to a linear structure obtained with the other methods, including CCSD(T). However, due to the lack of experimental data for [Cu-L]2+ complexes and to contrasted results for the methods, it is not possible to conclude definitely. For the high coordinated complexes [Cu(NH3)4]+ and [Cu(NH3)4]2+, the PBE calculation method was used in addition to the BP86, B3LYP and MP2. The BDE values were very close to each other when there is no change of the oxidation state during the reaction. On the basis of these calculations, the choice of the method was less crucial for high coordinated complexes [Cu(NH3)4]+ and [Cu(NH3)4]2+ so long as the oxidation state remained the same during the reaction. In contrast, when [Cu(NH3)4]2+ is reduced in [Cu(NH3)3]+ and NH3, the BDE calculated using the four methods were markedly different.     

An efficient sensor for Zn2+ and Cu2+ based on different binding modes

An efficient sensor for Zn(2+) and Cu(2+) was designed based on different binding modes. The sensor displays ratiometric signals for Zn(2+), due to the Zn(2+)-triggered amide tautomerization; while dual-mode selective behaviors for Cu(2+) result from the deprotonation of the amide tautomer.     

A novel rhodamine-based thiacalix[4]arene fluorescent sensor for Fe3+ and Cr3+

The novel fluorescent sensor 1, which is comprised of two rhodamine B lactams as fluorophores that are 1,3-alternately linked to a thiacalix[4]arene, behaves as a highly sensitive ion-induced fluorescent sensor for Fe³⁺ and Cr³⁺. This compound was synthesized, and its recognition of metal ions was evaluated by fluorescence and absorption spectroscopy. The possible mechanism of Fe³⁺- and Cr³⁺-induced spirocycle opening of 1 leads to fluorescent and colorimetric enhancement, and these properties were investigated by spectroscopy, ¹H NMR and IR. The stoichiometric ratios and association constants of the complexes between 1 and these ions have been measured and calculated, and showed that the presence of Fe³⁺ or Cr³⁺ induced sensor 1 to form a stable 1:1 complex.     

Bilayer structure of tetrasodium thiacalix[4]arene tetrasulfonate

The title calixarene, tetrasodium thiacalix[4]arene tetrasulfonate, was prepared and its crystal structure was determined. Na₄[thiacalix[4]arene sulfonate]·9H₂O·CH₃CH₂OH, belongs to triclinic system, space group P , a=10.820(5), b=14.109(6), and c=14.514(6)Å, =99.702(7), β=93.445(8), and γ=93.445(8)°, V=2174.2(16)ų, Z=2. The title calixarene exists in the solid state as bi-layer of anionic calixarene in the cone configuration. These layers alternate with inorganic regions which contain the sodium cations and the water molecules.     

Band intensity in the IR spectra and conformations of calix[4]arene and thiacalix[4]arene

The experimental IR and Far IR spectra of the calix[4]arene, p-tert-butylcalix[4]arene, thialcalix[4]arene and p-tert-butylthiacalix[4]arene were examined at different temperatures and interpreted. The band frequencies and intensities in the IR spectra of the calix[4]arene and thialcalix[4]arene were calculated. The absorption curves of the four possible calix[4]arene conformations: cone, partial cone, 1,2- and 1,3-alternate were computed. The bands characteristic for each conformation are defined and assigned. The obtained spectra-structure correlation can be used for the characteristic of calixarenes conformation.     

Preparation and characterization of thiacalix[4]arene coated water-soluble CdSe/ZnS quantum dots as a fluorescent probe for Cu2+ ions

Highly fluorescent water-soluble CdSe/ZnS (core/shell) quantum dots (QDs) as a fluorescent Cu2+ ion probe were synthesized using thiacalix[4]arene carboxylic acid (TCC) as a surface coating agent. Hydrophobic trioctylphosphine oxide (TOPO) capped CdSe/ZnS QDs were overcoated with TCC in tetrahydrofuran at room temperature, and deprotonation of the carboxyl groups of TCC resulted in the formation of water-soluble QDs. The surface structure of the QDs was characterized by using transmission electron microscopy (TEM) and fluorescence correlation spectroscopy (FCS). TEM images showed that TCC-coated QDs were monodispersed with the particle size (core-shell moiety) of approximately 5 nm. Hydrodynamic diameter of the TCC-coated QDs was determined to be 8.9 nm by FCS, showing that the thickness of the surface organic layer of the QDs was approximately 2 nm. These results indicate that the surface layer of TCC-coated QDs forms a bilayer structure consisting of TOPO and TCC molecules. TCC-coated CdSe/ZnS QDs were highly fluorescent (quantum yield, 0.21) compared to the QDs surface-modified with mercaptoacetic acid and mercaptoundecanoic acid. Fluorescence of the TCC-coated QDs was effectively quenched by Cu2+ ions even in the presence of other transition metal ions such as Cd2+, Zn2+, Co2+, Fe2+, and Fe3+ ions in the same solution. The Stern-Volmer plot for the fluorescence quenching by Cu2+ ions showed a linear relationship up to 30 microM of Cu2+ ions. The ion selectivity of TCC-coated QDs was determined by measurements of fluorescence responses towards biologically important transition metal ions (50 microM) including Fe2+, Fe3+, Co2+>Zn2+, Cd2+. The fluorescence of TCC-coated QDs was almost insensitive to other biologically important ions such as Na+, K+, Mg2+, and Ca2+, suggesting that TCC-coated QDs can be used as a fluorescent Cu2+ ion probe for biological samples. A possible quenching mechanism by Cu2+ ions was also discussed on the basis of a Langmuir-type adsorption isotherm.     

Fluorescent chemosensor for Cu2+ ion based on iminoanthryl appended calix[4]arene

Calix[4]arene based podands 1a of cone conformation and 1b of 1,3-alternate conformation possessing imine units and bearing anthracene moieties have been synthesized by a 1 + 2 Schiff base condensation in good yields and examined for their cation recognition abilities towards cations such as lithium, sodium, potassium, nickel, cadmium, copper, zinc, lead, silver and mercury ions by UV–vis and fluorescence spectroscopy. The calix[4]arene derivative 1b shows a selective fluorescence enhancement in presence of Cu²⁺ ions among the various metal ions tested (Li⁺, Na⁺, K⁺, Ni²⁺, Cd²⁺, Cu²⁺, Zn²⁺, Pb²⁺, Ag⁺ and Hg²⁺ ions). The colour of the solution changes from colourless to light yellow in the presence of Cu²⁺ ions. The stoichiometry of the complex formed between 1b and Cu²⁺ was found to be 1:1 as established by Job’s plot.     

硫杂杯[4]芳烃衍生物的合成及萃取性能研究

通过两个不同的平台合成了一系列结构新颖的硫杂杯[4]芳烃衍生物,阳离子萃取试验表明该硫杂杯[4]芳烃衍生物比含有相似官能团的杯[4]芳烃衍生物具有更好的软金属离子萃取性能,新化合物的结构经IR, 1H NMR,MS和元素分析等证实.     

A pyrenyl-appended triazole-based calix[4]arene as a fluorescent sensor for Cd2+ and Zn2+

The synthesis and evaluation of a novel calix[4]arene-based fluorescent chemosensor 8 for the detection of Cd(2+) and Zn(2+) is described. The fluorescent spectra changes observed upon addition of various metal ions show that 8 is highly selective for Cd(2+) and Zn(2+) over other metal ions. Addition of Cd(2+) and Zn(2+) to the solution of 8 results in ratiometric measurement.     

New host molecules based on the thiacalix[4]arene platform for cation recognition

The synthesis of four new tetra-and di-carbonyl p-tert-butyl thiacalix[4]arenes is reported. The three tetracarbonyl compounds differ as conformational isomers (cone, partial cone, and 1,3-alternate). The influence of the alkali metal ion templates on the formation of the different conformational isomers of the compound was studied by the solvent extraction method.     

A new colorimetric and fluorescent chemosensor based on thiacalix[4]arene for fluoride ions

A new thiacalix[4]arene based fluorescent chemosensor thiacalix[4]arene-N-(quinolin-8-yl)acetamide (TCAN8QA) has been synthesized. TCAN8QA has been found to exhibit highly selective behavior for F⁻ ions among all other anions, that is, Cl⁻, Br⁻, I⁻, PO₄⁻³, OH⁻, H₂PO₄⁻, and CH₃COO⁻ in the absorption spectra as well as in the emission spectra. Red shift and quenching in emission spectra constituting the signature for fluoride detection are due to photoinduced charge transfer (PCT) which can be attributed to deprotonation of acidic NH proton in the presence of fluoride ions.     

硫杂杯[4]芳烃化学修饰的研究进展

硫杂杯[4]芳烃是由S原子取代经典杯芳烃中的桥联亚甲基而成的大环化合物,在分子识别、多核金属配合物、化学传感器等方面有广泛的应用.对硫杂杯[4]芳烃的化学修饰进行综述,有助于新型功能化硫杂杯芳烃衍生物的研究.