Structural investigation of YBCO films and bicrystal grain boundary junctions

Summary We present a structural analysis of YBCO superconducting thin films fabricatedin situ by Inverted Cylindrical Magnetron (ICM) sputtering on commercial SrTiO₃ single-crystal and bicrystal substrates. A detailed structural characterization of the superconductor films was performed by using single-crystal X-ray diffractometry confirming that YBCO films have a strongc-axis orientation of the grains with a small mosaic spread. In the films grown on bicrystal substrates we observed a strong correlation with the lattice structure of the substrate. In addition, a surface analysis of the region across the grain boundary edge has been performed by using scanning electron microscopy. Paper presented at the ?VII Congresso SATT?, Torino, 4–7 October 1994.     

Stick-slip friction and energy dissipation in boundary lubrication

Shearing of a simple nonpolar film, right after the liquid-to-solid phase transition under nanometer confinement, is studied by using a liquid-vapor molecular dynamics simulation method. We find that, in contrast with the shear melting and recrystallization behavior of the solidlike phase during the stick-slip motion, interlayer slips within the film and wall slips at the wall-film interface are often observed. The ordered solidified film is well maintained during the slip. Through the time variations of the frictional force and potential energy change within the film, we find that both the friction dissipation during the slip and the potential energy decay after the slip in the solidified film take a fairly large portion of the total energy dissipation.     

Transverse coupling and dynamics of patterns in a photorefractive oscillator

The effect of transverse coupling in a photorefractive oscillator is studied. From the study the condition for stable optical patterns of multimode oscillation is given analytically and verified by numerical simulation. Under the stable condition, the period-doubling route to spatiotemporal chaos is observed.     

Kinetics and dynamics of frictional stick-slip in mesoscopic boundary lubrication

The kinetics and dynamics of frictional stick-slip motion of a slider of size extending from mesoscopic upward is analyzed within the framework of a multi-contact, earthquake-like model. The microscopic contacts are characterized by a distribution of static thresholds for individual breaking. The condition for an overall elastic instability leading to stick-slip sliding are derived and details of the slip motion are studied theoretically. The crucial model parameters emerging from this analysis include the delay time for each micro-contact to reform after breaking, the strength of elastic interaction between the contacts, the elasticity of contacts and of the slider, and the distribution of static thresholds for their breaking. The dynamics is also studied with the help of a scaling procedure. As a prototype application, we adopt parameters appropriate to describe recent surface force apparatus (SFA) boundary lubrication experiments. Despite suggestions of extremely large lubricant viscosities, the experimental data are shown to be fully compatible with ordinary, bulk-like viscosity values once the multi-contact aspects are taken into account.     

Transverse MIR fast response in PbSe films

Under lightening, anisotropic semiconductor or semimetal films can show large transverse voltage. PbSe and PbS films have a room temperature intense sub nsec response ( V/MW) in the 10µm region due to free carrier photon drag, but the effective direct matched response on a 50 impedance is lower ( 0.1 V/MW for 1 cm² film) because of the high film resistance (> KW). CO₂ 500ps mode locked pulses are easily detected in the scope limit.     

The interaction of resonances in a weakly nonlinear oscillator with a quasiperiodic excitation

Conditions for chaos onset due to the interaction of resonances in a weakly nonlinear oscillator with a quasiperiodic excitation are investigated. The focus is made on the interaction of the 1:1 resonance with that of 1:m, where m is an arbitrary integer number. Analytical conditions of the chaos arising are obtained through the combined application of the averaging procedure and Melnikov's technique. The comparison study of these conditions with those following from standard Chirikov's approach is provided. (c) 1997 American Institute of Physics.     

剪切作用下Cu(100)扭转晶界塑性行为研究

本文采用分子动力学方法研究了在剪切载荷作用下,Cu(100)扭转晶界对Cu柱屈服强度的影响.模拟结果发现,在加载过程中,低角度扭转晶界形成的位错网发生位错形核与扩展,位错之间的塞积作用提高了Cu柱的屈服强度;对于高角度扭转晶界,晶界发生滑动降低了Cu柱的屈服强度.同时发现,随着扭转角度的增加,Cu柱的屈服强度先增大,当扭转角度大于临界角度时,Cu柱的屈服应力逐渐减小.这表明剪切载荷作用下,两种不同的机理主导Cu柱的屈服,对于小于临界角度的扭转晶界,Cu柱的屈服由晶界位错形核和扩展机理主导,对于大于临界角度 关键词： 扭转晶界 分子动力学 位错形核 晶界滑移     

A phenomenology of boundary lubrication: the lumped junction model

We propose a phenomenological model of boundary lubricated junctions consisting of a few layers of small molecules which describes the rheological properties of these sytems both in the static, frozen, and sliding, molten, states as well as the dynamical transition between them. Two dynamical regimes can be distinguished, according to the level of internal damping of the junction, which depends on its thickness and on the normal load. In the overdamped regime, under driving at constant velocity v through an external spring, the motion evolves continuously from “atomic stick-slip” to modulated sliding. Underdamped systems exhibit, under given external stress, a range of dynamic bistability where the sheared static state coexists with a steadily sliding one. The frictional dynamics under shear driving is analyzed in detail, it provides a complete account of the qualitative dynamical scenarios observed by Israelashvili et al., and yields semiquantitative agreement with experimental data. A few complementary experimental tests of the model are suggested. Received: 18 December 1997 / Received in final form and accepted: 26 March 1998     

Interdiffusion in two-layer Pd/Ag films III. TEM investigation of diffusion-induced grain boundary migration

Diffusion-induced grain boundary migration (DIGM) is studied by the transmission electron microscopy method in polycrystalline two-layer Pd/Ag thin films with a grain size (100–2000 nm). In addition to the typical features of DIGM known for coarse-grained bulk objects and foils, new features are found which are caused by a quite dense network of triple junctions and by misfit dislocations: fast increase of grain boundary curvature and inclination; back motion of grain boundaries owing to recrystallization forces and termination of DIGM. Homogenization resulted from diffusion-induced migration of misfit dislocations is observed in addition to DIGM.     

Theoretical investigation of a backward wave oscillator

From the linear Vlasov equation, the theoretical investigation on relativistic backward wave oscillator is performed. The relationship between the microwave power and the guiding magnetic field, which accords with the results of the particle simulation and experiments, is deduced.     

Domain boundary instability in weakly coupled GaAs/AlGaAs superlattices

Self-sustained oscillations of the current with a frequency ranging from 0.7 to 3.6 MHz have been detected in weakly coupled GaAs/AlGaAs superlattice at 4.2 K. A study of the static and dynamic characteristics of the structure showed that the spontaneous oscillations arise in the local region of the superlattice, restricted by a size of the domain boundary expansion. The oscillations arise in the negative differential conductivity regions due to the periodic coupling and decoupling of subbands in adjacent quantum wells, forming the expanded domain boundary. We suggest that the spatio-temporal oscillations of the domain boundary should be considered as oscillations of an ensemble of several strongly phase-coupled oscillators. Each oscillator is a couple of two adjacent quantum wells, which operates as a single resonant tunneling diode.     

Theoretical investigation of a backward wave oscillator

From the linear Vlasov equation,the theoretical investigation on relativistic backward wave osciUator is performed.The relationship between the microwave power and the guiding magnetic field,which accords with the results of the particle simulation and experiments,is deduced.     

Cavitation in a lubrication flow between a moving sphere and a boundary

A heavy sphere is free to move inside a rotating horizontal cylinder filled with viscous liquid. The steady motion is essentially Stokesian, and the sphere rotates at a fixed location with a lubrication layer between the ball and the wall. The symmetry of the flow field suggests there will be no force to balance the normal component of the ball's weight. However, we show that a normal force can arise when a cavitation bubble is present. The bubble size was measured as a function of the cylinder rotation rate and agrees well with a model which uses the force and torque balances on the sphere.     

An investigation of the scaled modified oscillator potential

In the second volume of their book Nuclear structure, Bohr and Mottelson propose that in the modified oscillator potential the spin-orbit term and the l² term should be scaled according to the deformation of the potential. This scaling has been studied in detail, and some of its more general consequences are discussed. The single-particle parameters κ and μ have been fitted for nuclei in the rare earth region, for lead and for actinides. The scaled potential has been used for a detailed investigation of the nuclei in the actinide region, including calculations of potential energy surfaces, fission barriers and ground-state masses. Both symmetric and reflection asymmetric deformations have been considered and the results thus obtained with the scaled potential have been compared to those obtained with the modified oscillator potential and the folded-Yukawa potential.     

X波段磁绝缘线振荡器的数值模拟

在对磁绝缘线振荡器（MILO）慢波结构色散特性进行理论分析的基础上,结合负载限制型和渐变型MILO的特点,对X波段MILO慢波结构、阴极和中心阳极进行了设计。利用2.5维全电磁PIC程序进行粒子模拟,研究了输出功率与结构参数之间的关系,进一步优化MILO结构。在外加电压为510 kV,束流43 kA情况下,模拟得到平均功率2.83 GW的微波输出,中心频率为8.2 GHz,功率转换效率12.9%。     

X波段磁绝缘线振荡器的数值模拟

 在对磁绝缘线振荡器（MILO）慢波结构色散特性进行理论分析的基础上,结合负载限制型和渐变型MILO的特点,对X波段MILO慢波结构、阴极和中心阳极进行了设计。利用2.5维全电磁PIC程序进行粒子模拟,研究了输出功率与结构参数之间的关系,进一步优化MILO结构。在外加电压为510 kV,束流43 kA情况下,模拟得到平均功率2.83 GW的微波输出,中心频率为8.2 GHz,功率转换效率12.9%。     

Stick-slip regime of melting of boundary lubrication taking into account spatial inhomogeneity

The processes of boundary friction between two atomically smooth solid surfaces with an ultrathin layer of lubricant between them are studied in the context of the model of the first-order phase transitions, taking into account the spatial inhomogeneity. The stick-slip regime of motion, which is often observed experimentally for such systems, is considered. Such a regime is represented as the periodic first-order phase transitions between the structural states of the lubricant. It is shown that during motion, the lubricant tends to assume a homogeneous structure over the sliding plane, which results in the periodicity of time dependences of the basic parameters in the stick-slip regime. The dependence of the order parameter on the shear rate is analyzed and it is shown that this dependence has the same shape for all the regions on the contact plane.