Molecular addition compounds. 18. Borane adducts with hydroxydialkyl sulfide borates for hydroboration. New, essentially odorless, water-soluble sulfide borane acceptors for hydroboration.

Hydroxydialkyl sulfides of general formula RS(CH2CH2)nH (R = Et, t-Bu, i-Am; n = 1-3) and thiodiethanol monomethyl ether (9) have been synthesized and used as borane carriers. The compounds 3 and 6 (R = Et, n = 2, 3), 7 (R = t-Bu, n = 3), and 9 are completely miscible with water and exhibit only very mild odor. The sulfides were transformed into the corresponding borates by treatment either with boric acid or with diborane. The borates complex 3 mol of borane per 1 mol of borate to give highly reactive, stable, liquid adducts, hydroborating 1-octene in 15 min at room temperature. The adducts derived from water soluble sulfides 3 and 9, selected for the hydroboration of more hindered olefins, reacted readily with (-)-beta-pinene, 1-methylcyclohexene, and 2,3-dimethyl-2-butene. The carrier borates liberated from the adducts during hydroboration are readily hydrolyzed to give 3 and 9, which can be washed off with water from trialkylboranes or oxidation products. Consequently, hydroxydialkyl sulfides 3 and 9 are the first completely water-soluble sulfide borane carriers that can be washed off in the workup of hydroboration products. The adducts derived from 3 and 9 are new, highly promising reagents suitable for large scale hydroborations and reductions.     

Molecular addition compounds. 16. New, highly reactive borane adducts with N,N-dialkyl-tert-alkylamines for hydroboration

Several N,N-diethyl-tert-alkylamines, such as N,N-diethyl-2-methyl-2-butylamine (1, t-PentNEt2), N,N-diethyl-2,3-dimethyl-2-butylamine (2, t-HexNEt2), N,N-diethyl-2,3,3-trimethyl-2-butylamine (3, t-HeptNEt2), and N,N-diethyl-1,1,3,3-tetramethylbutylamine (4, t-OctNEt2) with varying steric bulk around nitrogen (by changing the tert-alkyl group) have been prepared and examined as borane carriers. The complexing ability of these N,N-diethyl-tert-alkylamines with borane decreases in the order: t-BuNEt2 > t-PentNEt2 > t-HeptNEt2 > t-HexNEt2 > or = t-OctNEt2. From these preliminary studies, the more promising tert-octyldialkylamines were selected for detailed studies. The optimum steric bulk around the nitrogen atom was established by comparing various tert-octyldialkylamines containing variable steric requirements for both the alkyl groups. The complexing ability of these amines with borane decreases in the order shown: t-OctNMe2 (5) > t-OctNEtMe (6) > t-OctN-(CH2CH2)2O (7) > t-OctNEt2 (4) > t-OctNBuiMe (8) > t-OctNPr(n)2 (9). The reactivity of the corresponding borane adducts toward 1-octene increases in the reverse order. Among the various tert-octyldialkylamine-boranes prepared and examined, only t-OctNEt2 (4) forms a highly reactive liquid borane adduct, which hydroborates 1-octene in tetrahydrofuran rapidly at room temperature. Accordingly, detailed hydroboration studies with this new, highly reactive amine-borane adduct, t-OctEt2N:BH3 (10) and representative mono-, di-, tri-, and tetra-substituted olefins were carried out at room temperature (22 +/- 3 degrees C) in selected solvents, tetrahydrofuran, dioxane, tert-butyl methyl ether, n-pentane and dichloromethane. Simple unhindered olefins were hydroborated to the trialkylborane stage, whereas hindered olefins were partially hydroborated to the mono or dialkylborane stage. The hydroborations can be carried out conveniently in a variety of solvents. The amine-borane adduct showed enhanced reactivity in dioxane but low reactivity in dichloromethane. The alkylboranes obtained after hydroboration were oxidized with hydrogen peroxide/sodium hydroxide and the product alcohols were obtained in quantitative yields, as established by GC analysis. The carrier amine was recovered by simple acid-base manipulations in good yield and can be readily recycled back to the borane adduct.     

Hydroboration. 97. Synthesis of new exceptional chloroborane--Lewis base adducts for hydroboration. Dioxane--monochloroborane as a superior reagent for the selective hydroboration of terminal alkenes

Several less volatile oxygen-containing Lewis bases, such as tert-butyl methyl ether, dioxane, anisole, ethyl acetate, beta-chloroethyl ether, and monoglyme, were examined as prospective mono- and dichloroborane carriers. Dioxane, ethyl acetate, and beta-chloroethyl ether form relatively stable boron trichloride adducts, but the boron trichloride adduct of monoglyme is not very stable and must be used immediately. On the other hand, tert-butyl methyl ether and anisole fail to form stable boron trichloride adducts and the corresponding ether-cleaved products are obtained. Among the selected oxygen-containing Lewis bases, only dioxane forms stable and reactive mono- and dichloroborane adducts. Monoglyme and beta-chloroethyl ether give stable dichloroborane adducts requiring excess of diborane. Convenient methods for the preparation of mono- and dichloroborane adducts of dioxane from dioxane-BCl(3) and NaBH(4) in the presence of catalytic amounts of tri- or tetraglyme were developed. The dioxane--monochloroborane adduct hydroborates representative olefins cleanly and rapidly. The corresponding alcohols were obtained in quantitative yields after oxidation. Also, the hydroboration of several terminal olefins with dioxane--monochloroborane were highly regioselective and the primary alcohols were obtained almost exclusively (>99.5%), after oxidation. Accordingly, dioxane-monochloroborane should serve as a reagent of choice for such hydroborations. The dioxane--dichloroborane adduct showed remarkable selectivity toward 2-substituted terminal olefins, such as 2-methyl-1-butene and beta-pinene, when compared to simple terminal and hindered olefins, giving a unique tool for selective hydroborations. Dichloroborane adducts of monoglyme and beta-chloroethyl ether also showed high reactivity, even at room temperature, toward simple unhindered olefins. However, hydroboration of hindered olefins is slow and requires either higher temperatures or the addition of 1 equiv of boron trichloride to liberate free dichloroborane, as in the case of the previously known dichloroborane adducts of methyl sulfide and diethyl ether.     

Quantum chemical study on enantioselective reduction of aromatic ketones catalyzed by chiral cyclic sulfur‐containing oxazaborolidines. Part 1. Structures and properties of catalysts

The ab initio molecular orbital method is employed to study the structures and properties of chiral cyclic sulfur‐containing oxazaborolidine, as a catalyst, and its borane adducts. All the structures are optimized completely by means of the Hartree–Fock method at 6‐31g* basis sets. The catalyst is a twisted chair structure and reacts with borane to form four plausible catalyst–borane adducts. Borane–sulfur adducts may be formed, but they barely react with aromatic ketone to form catalyst–borane–ketone adducts, because they are repulsed greatly by the atoms arising from the chair rear of the catalyst with a twisted chair structure. Borane–N adduct has the largest formation energy and is predicted to react easily with aromatic ketone to form catalyst–borane–ketone adducts. The formation of the catalyst–borane adducts causes the B_BH3 H_BH3 bond lengths of the BH₃ moiety to be increased and thus enhances the activity of the enantioselective catalytic reduction. The borane–N adduct is of great advantage to hydride transfer. © 2000 John Wiley & Sons, Inc. Int J Quant Chem 78: 245–251, 2000     

Generation of bis(pentafluorophenyl)borane-dimethyl sulfide complex as a solution of hexane and its application to hydroboration of alk-1-yne with pinacolborane

A solution of bis(pentafluorophenyl)borane-dimethyl sulfide complex in hexane was generated by redistribution between tris(pentafluorophenyl)borane and borane-dimethyl sulfide complex. In the resulting solution a stoichiometric hydroboration of alk-1-yne with pinacolborane proceeded well at room temperature to afford (E)-alk-1-enylboronic acid pinacol ester in high yield. Bis(pentafluorophenyl)borane-dimethyl sulfide complex served as a mediator for the hydroboration.     

Ring cleavage rearrangement of cyclobutylmethylboranes

Boranes derived from hydroboration of methylenecyclobutane with borane/THF, 9-borabicyclo[3.3.1]nonane, and borane-methyl sulfide rearranged on heating in situ at 100–160°C to open chain structures. Products after oxidation were the unrearranged cyclobutylmethanol, and 4-penten-1-ol, 1,4-pentanediol and 1,5-pentanediol. The unsaturated alcohol was the major product in reactions with a stoichiometric ratio of alkene to BH bonds, and the diols were formed with excess borane. With borane-methyl sulfide as hydroborating reagent, the rate of rearrangement at 100°C in triglyme was not significantly dependent upon the initial alkene/borane ratio $\text{3}\text{1}$ or $\text{1.15}\text{1}$ or the presence of excess methyl sulfide. However, an equivalent amount of pyridine prevented rearrangement. Rearrangement in THF using borane/THF also occurred at comparable rates in the presence and absence of excess borane. Little or no isomerization of the boron function into the cyclobutane ring was observed. Results are interpreted on the basis of a concerted four-center mechanism which requires a vacant boron orbital.     

Poly(propylene sulfide)–borane: convenient and versatile reagent for organic synthesis

Poly(trimethylene sulfide)–borane adduct has been used as an efficient borane reagent in hydroboration reactions to produce various organoboranes, which have then been used without isolation in further reactions that involve single, double and triple migrations of alkyl groups. The presence of the polymer causes no problems, but there are practical advantages associated with its use, including lack of odour and easy recoverability.     

Reactivity of a Frustrated Lewis Pair and Small‐Molecule Activation by an Isolable Arduengo Carbene?B{3,5‐(CF3)2C6H3}3 Complex

Tris[3,5‐bis(trifluoromethyl)phenyl]borane reacts with the sterically demanding Arduengo carbenes 1,3‐di‐tert‐butylimidazolin‐2‐ylidene and 1,3‐bis(2,6‐diisopropylphenyl)imidazolin‐2‐ylidene to form isolable normal adducts. In the case of 1,3‐di‐tert‐butylimidazolin‐2‐ylidene, the adduct exhibits dynamic behaviour in solution and frustrated‐Lewis‐pair (FLP) reactivity. Fast cleavage of dihydrogen and THF, the C? H activation of phenylacetylene, and carbon dioxide fixation were achieved by using solutions of this adduct in benzene. This adduct is stable at room temperature in the absence of suitable substrates; however, thermal rearrangement into an abnormal carbene–borane adduct can be observed. In contrast, the 1,3‐bis(2,6‐diisopropylphenyl)imidazolin‐2‐ylidene adduct exhibits no evidence of FLP reactivity or of dissociation in solution. DFT calculations confirmed the experimental behaviour and stability of these carbene–borane adducts.     

Reaktionen von Aminoboranen und Hydrazinoboranen mit Carbonyl- und Thiocarbonylverbindungen

Zusammenfassung Bei der Aminoborierung von Carbonylsulfid erfolgt 1,2-Addition an die Carbonylgruppe, wobei in Tris(dimethylamino)boran zwei der B–N-Bindungen, in Bis(dimethylamino)chlorboran nur eine B–N-Bindung reagieren. In Tris(2,2-dimethylhydrazino)boran reagieren alle drei B–N-Bindungen mit CO₂; mit CS₂ erfolgt unter den gleichen Bedingungen keine Reaktion. Mit Phosgen und Thiophosgen reagiert Tris(dimethylamino)boran unter Bildung von Bis(dimethylamino)chlorboran und substituierter Carbamide.

---

Reactions of aminoboranes and hydrazinoboranes with carbonyl and thiocarbonyl compounds

Upon aminoboration of carbonyl sulfide 1,2-addition to the carbonyl group is observed. In tris(dimethylamino)borane insertion into two of the B–N bonds occurs, while in bis(dimethylamino)chloroborane only one B–N bond reacts with OCS. In tris(2,2-dimethylhydrazino)borane all three B–N bonds react with CO₂, while with CS₂ no insertion reaction is observed under comparable conditions. Tris(dimethylamino)borane reacts with phosgene and thiophosgene with formation of bis(dimethylamino)chloroborane and substituted carbamides.

     

Hydroboration with pyridine borane at room temperature

Treatment of pyridine borane (Py.BH3) with iodine, bromine, or strong acids affords activated Py.BH2X complexes that are capable of hydroborating alkenes at room temperature. Evidence is presented for an unusual hydroboration mechanism involving leaving group displacement. In contrast to THF.BH3, hydroboration with Py.BH2I selectively affords the monoadducts. The crude hydroboration products are converted into synthetically useful potassium alkyltrifluoroborate salts upon treatment with methanolic KHF2.     

Addition of the phenoxathiin cation radical to alkenes and nonconjugated dienes. Formation of (E)- and (Z)-(10-phenoxathiiniumyl)alkenes and (E)- and (Z)-(10-phenoxathiiniumyl)dienes on basic alumina

Addition of phenoxathiin cation radical (PO*+) to acyclic alkenes in acetonitrile (MeCN) solution occurred stereospecifically to form bis(10-phenoxathiiniumyl)alkane adducts. Stereospecific trans addition is ascribed to the intermediacy of an episulfonium cation radical. The alkenes used were cis- and trans-2-butene, cis- and trans-2-pentene, cis- and trans-4-methyl-2-pentene, cis- and trans-4-octene, trans-3-hexene, trans-3-octene, trans-5-decene, cis-2-hexene, and cis-2-heptene. The erythro bisadducts (compounds 6) were obtained with trans-alkenes, while threo bisadducts (compounds 7) were obtained with cis-alkenes. The assigned structures of 6 and 7 were consistent with their NMR spectra and, in one case, 6c (the adduct of trans-4-methyl-2-pentene) was confirmed with X-ray crystallography. Additions of PO*+ to 1,4-hexa-, 1,5-hexa-, 1,6-hepta-, and 1,7-octadiene gave bis(10-phenoxathiiniumyl)alkenes (compounds 8), the assigned structures of which were consistent with their NMR spectra. Each of these adducts lost a proton and phenoxathiin (PO) when treated with basic alumina in MeCN solution. Compounds 6 (from trans-alkenes) gave mixtures of (Z)- (9) and (E)-(10-phenoxathiiniumyl)alkenes (10) in which the (Z)-isomers (9) were dominant. On the other hand, compounds 7 (from cis-alkenes) gave mixtures of 9 and 10 in which, with one exception (the adduct 7c of cis-4-methyl-2-pentene), compounds 10 were dominant. The path to elimination is discussed. The alkenes 9 and 10 were characterized with NMR spectroscopy and, in one case (9a), with X-ray crystallography. Reactions of 8b-d with basic alumina gave mixtures of (E)- (13) and (Z)-(10-phenoxathiiniumyl)dienes (14), in which compounds 13 were dominant. The configuration of the product from 8a (the adduct of 1,4-hexadiene) could not be settled. Noteworthy features in the coupling patterns and chemical shifts in the NMR spectra of some of the adducts and their products are discussed and related to adduct conformations.     

Organoboranes for synthesis. 4 : Oxidation of organoboranes with pyridinium chlorochromate. A direct synthesis of aldehydes from terminal alkenes via hydroboration

The oxidation of trialkylboranes containing primary a1kyl groups with pyridinium chlorochromate (PCC) in methylene chloride provides the corresponding aldehydes in good yields. The stoichiometry for the oxidation of alcohols, borate esters and trialkylboranes with PCC has been examined. In view of the poor regioselectivity (only 94% primary alkyl groups) and functional group tolerance observed in the hydroboration with borane (BH₃.THF or BH₃.SMe₂), a more selective hydroborating agent, bis(3-methyl-2-butyl)borane (disiamylborane), was utilized for the preparation of aldehydes from terminal alkenes. However, the formation of 3-methyl-2-butanone as a by-product, and the requirement of six moles of PCC per mole of aldehyde are major disadvantages in this method. This difficulty was circumvented by employing monochloroborane-dimethyl sulfide for hydroboration. This reagent exhibits high regioselectivity (⪢ 99% primary alkyl groups) in the hydroboration of terminal alkenes. Oxidation of the resulting dialkylchloroborane following hydrolysis affords the desired aldehydes in satisfactory yields. Consequently, the hydroboration of terminal alkenes, followed by PCC oxidation, represents a direct convenient method for the transformation of alkenes into the corresponding aldehydes.     

9-H-9-Borafluorene dimethyl sulfide adduct: a product of a unique ring-contraction reaction and a useful hydroboration reagent

The dimethyl sulfide adduct 2(DMS) is a crystalline storage form of the unstable hydroboration reagent 9-H-9-borafluorene (2); 2(DMS) is available by the addition of DMS to either in situ generated [2](2) or 1,2-(2,2'-biphenylylene)diborane(6) (7).     

Revisiting the reduction of indoles by hydroboranes: A combined experimental and computational study

A combined experimental and density functional computational study was used to probe the mechanism for the reduction of indoles using simple borane BH₃·DMS (DMS?=?dimethyl sulfide). Experimental and computational studies all steer to the formation of the reduced species 1-BH₂-indolines as the resting state for this reaction, as opposed to the historically presumed formation of the unreduced 1-BH₂-indoles, before the addition of a proton source to form the final product indolines. Furthermore, it was observed that molecular H₂ was generated and consumed in the reaction. Computations put forward hydroboration followed by protodeborylation as the very reasonable mechanistic route for the formation of experimentally observed major intermediate 1-BH₂ indolines. For the H₂ consumption in the reaction, computations suggest the frustrated Lewis pair-type heterolytic splitting of H₂ by a bis(3-indolinyl)borane intermediate.     

Bis(1-Methyl-ortho-Carboranyl)Borane

The Lewis superacid, bis(1-methyl-ortho-carboranyl)borane, is rapidly accessed in two steps. It is a very effective hydroboration reagent capable of B−H addition to alkenes, alkynes, and cyclopropanes. To date, this is the first identified Lewis superacidic secondary borane and most reactive neutral hydroboration reagent.     

Amine-directed hydroboration: scope and limitations

Iodine activation induces intramolecular hydroboration of homoallylic and bis-homoallylic amine boranes with good to excellent control of regiochemistry compared to control experiments using excess THF*BH 3. Deuterium labeling and other evidence confirm that the iodine-induced hydroboration reaction of homoallylic amine boranes occurs via an intramolecular mechanism equivalent to the classical 4-center process and without competing retro-hydroboration. Longer carbon chain tethers result in lower regioselectivity, whereas the shorter tether in allylic amines results in a switch to dominant intermolecular hydroboration. Regioselectivity in THF*BH 3 control experiments is higher for the allylic amine boranes compared to the iodine activation experiments, whereas the reverse is true for homoallylic amine borane activation.     

Formylborane Formation with Frustrated Lewis Pair Templates

Boranes R₂BH react with carbon monoxide by forming the respective borane carbonyl compounds R₂BH(CO). The formation of (C₆F₅)₂BH(CO) derived from the Piers borane, HB(C₆F₅)₂, is a typical example. Subsequent CO‐hydroboration does not take place, since the formation of the formylborane is usually endothermic. However, an “η²‐formylborane” was formed by CO‐hydroboration with the Piers borane at vicinal phosphane/borane frustrated Lewis pair (FLP) templates. Subsequent treatment with pyridine liberated the intact formylborane from the FLP framework, and (pyridine)(C₆F₅)₂B? CHO was then isolated as a stable compound. This product underwent typical reactions of carbonyl compounds, such as Wittig olefination.     

1,1‐Hydroboration and a Borane Adduct of Diphenyldiazomethane: A Potential Prelude to FLP‐N2 Chemistry

Diphenyldiazomethane reacts with HB(C₆F₅)₂ and B(C₆F₅)₃, resulting in 1,1‐hydroboration and adduct formation, respectively. The hydroboration proceeds via a concerted reaction involving initial formation of the Lewis adduct Ph₂CN₂BH(C₆F₅)₂. The highly sensitive adduct Ph₂CN₂(B(C₆F₅)₃) liberates N₂ and generates Ph₂CB(C₆F₅)₃. DFT computations reveal that formation of Ph₂CN₂B(C₆F₅)₃ from carbene, N₂, and borane is thermodynamically favourable, suggesting steric frustration could preclude carbene–borane adduct formation and affect FLP‐N₂ capture.     

Porphyrins in 1,3-dipolar cycloaddition reactions. Synthesis of new porphyrin-chlorin and porphyrin-tetraazachlorin dyads

N-(Porphyrin-2-ylmethyl)glycine was synthesized and used as precursor of azomethine ylide, which was trapped with several dipolarophiles. The reaction of that azomethine ylide with dimethyl fumarate afforded the expected adduct. However, with 1,4-benzo- and 1,4-naphthoquinones only dehydrogenated adducts were isolated. Also, the reaction of that ylide with meso-tetrakis(pentafluorophenyl)porphyrin and tetraazaporphine allowed access to novel porphyrin-chlorin and porphyrin-tetraazachlorin dyads.     

Quantum chemical study on enantioselective reduction of keto oxime ether with borane catalyzed by oxazaborolidine. Part 1. Structures of catalyst–borane–keto oxime ether adducts

In the present work, quantum chemical computations of the enantioselective reduction of keto oxime ether with borane catalyzed by chiral oxazaborolidine are performed by means of the Hartree–Fock and the density functional methods. The structures of oxazaborolidine, oxazaborolidine–borane adduct, and oxazaborolidine–borane–keto oxime ether adducts are optimized completely at the HF/6‐31g* and B3LYP/6‐31g* levels and their properties studied in detail. The oxazaborolidine catalyst is a twisted chair structure and reacts with borane at the nitrogen site of the catalyst to form the catalyst–borane adduct whose formation reaction is exothermic. The catalyst–borane adduct reacts easily with keto oxime ether to form catalyst–borane–keto oxime ether adducts that have eight stable structures. The coordination of the carbonyl oxygen in keto oxime ether at the boron site of the catalyst is of more advantage to the enantioselective reduction of keto oxime ether than the coordination of the oxime nitrogen in the keto oxime ether at the boron site is. © 2001 John Wiley & Sons, Inc. Int J Quant Chem 81: 291–304, 2001