固态发光碳纳米粒子的制备及在潜指纹成像中的应用

采用热分解法, 以柠檬酸钠和尿素为前驱体, 通过控制反应温度制备了不需要结合任何固体分散基质即可呈现明亮固态发光的碳纳米粒子(CNPs). 利用X射线衍射(XRD), 透射电子显微镜(TEM), X射线光电子能谱(XPS)、 紫外-可见吸收光谱(UV-Vis)和光致发光光谱(PL)等对CNPs的物相、 形貌和粒径、 表面基团及光学特性进行了表征. 结果表明, 该CNPs为无定形碳结构, 准球形形貌, 粒径分布在5~15 nm范围, 其表面存在C=O, C=N和O=C—N等基团. CNPs的水溶液和固体粉末在365 nm紫外光辐射下, 均呈现明亮的蓝绿色发光. 将该CNPs粉末用作荧光试剂可直接显现不同非渗透性客体表面的潜指纹(LFPs). 在365 nm紫外光激发下, CNPs粉末刷显后的LFPs细节特征清晰可辨, 强荧光背景客体表面的LFPs获得了高对比度的显现效果. 同时, 老化30 d的LFPs利用CNPs粉末也能够显现出可识别的指纹细节. CNPs发光粉末作为指纹试剂在刑侦领域具有潜在的应用前景.     

Formation mechanism of carbogenic nanoparticles with dual photoluminescence emission

We present a systematic investigation of the formation mechanism of carbogenic nanoparticles (CNPs), otherwise referred to as C-dots, by following the pyrolysis of citric acid (CA)-ethanolamine (EA) precursor at different temperatures. Pyrolysis at 180 °C leads to a CNP molecular precursor with a strongly intense photoluminescence (PL) spectrum and high quantum yield formed by dehydration of CA-EA. At higher temperatures (230 °C) a carbogenic core starts forming and the PL is due to the presence of both molecular fluorophores and the carbogenic core. CNPs that exhibit mostly or exclusively PL arising from carbogenic cores are obtained at even higher temperatures (300 and 400 °C, respectively). Since the molecular fluorophores predominate at low pyrolysis temperatures while the carbogenic core starts forming at higher temperatures, the PL behavior of CNPs strongly depends on the conditions used for their synthesis.     

氧化石墨烯水热还原前后的发光光谱

分别采用改进Hummers方法和水热还原法制备了氧化石墨烯(GO)和还原氧化石墨烯(RGO)。 GO和RGO经透射电子显微镜(TEM)、紫外-可见吸收光谱(UV-Vis)、红外光谱(IR)、荧光发射和激发光谱(PL、PLE)等技术手段进行了表征。 荧光发射光谱显示,氧化石墨烯(GO)在可见光的激发下可以得到波长在600~800 nm范围内的宽谱近红外荧光。 通过比较氧化石墨烯水热还原前后的光谱变化,发现氧化石墨烯近红外荧光起源于氧化石墨烯的表面含氧基团,如C=O、COOH。 近红外荧光穿透性好、对生物组织损坏小,非常适合于生物成像,预示着氧化石墨烯在生物成像方面的应用潜力。     

Near‐Infrared‐Emitting Nitrogen‐Doped Nanographenes

The quantum‐size effect, which enables nanographenes to emit photoluminescence (PL) in the UV to visible region, has inspired intense research. However, the control of the PL properties of nanographenes through manipulation of their π‐system by post‐modifications is not well developed. By utilizing a ring‐closure reaction between an aromatic 1,2‐dicarboxylic acid and a 1,8‐naphthalenediamine derivative, which produces a perimidine framework, nitrogen‐doped nanographenes were realized. Two nanographenes produced by a one‐pot reaction of edge‐oxidized nanographene (GQD‐ 2 ) with 1,8‐naphthalenediamine derivatives (GQD‐ 1 a and GQD‐ 1 b ) displayed an absorption band extending to >1000 nm; furthermore, the PL wavelength of GQD‐ 1 a was significantly red‐shifted into the near‐infrared (NIR) region in which it can be used for bioimaging. Time‐dependent DFT calculations of model nanographenes showed that the functional groups narrow the HOMO–LUMO gap, realizing the NIR‐emitting nanographenes.     

Tuning the excitonic and plasmonic properties of copper chalcogenide nanocrystals

The optical properties of stoichiometric copper chalcogenide nanocrystals (NCs) are characterized by strong interband transitions in the blue part of the spectral range and a weaker absorption onset up to ~1000 nm, with negligible absorption in the near-infrared (NIR). Oxygen exposure leads to a gradual transformation of stoichiometric copper chalcogenide NCs (namely, Cu(2-x)S and Cu(2-x)Se, x = 0) into their nonstoichiometric counterparts (Cu(2-x)S and Cu(2-x)Se, x > 0), entailing the appearance and evolution of an intense localized surface plasmon (LSP) band in the NIR. We also show that well-defined copper telluride NCs (Cu(2-x)Te, x > 0) display a NIR LSP, in analogy to nonstoichiometric copper sulfide and selenide NCs. The LSP band in copper chalcogenide NCs can be tuned by actively controlling their degree of copper deficiency via oxidation and reduction experiments. We show that this controlled LSP tuning affects the excitonic transitions in the NCs, resulting in photoluminescence (PL) quenching upon oxidation and PL recovery upon subsequent reduction. Time-resolved PL spectroscopy reveals a decrease in exciton lifetime correlated to the PL quenching upon LSP evolution. Finally, we report on the dynamics of LSPs in nonstoichiometric copper chalcogenide NCs. Through pump-probe experiments, we determined the time constants for carrier-phonon scattering involved in LSP cooling. Our results demonstrate that copper chalcogenide NCs offer the unique property of holding excitons and highly tunable LSPs on demand, and hence they are envisaged as a unique platform for the evaluation of exciton/LSP interactions.     

Carbon Dots Prepared by Hydrothermal Treatment of Dopamine as an Effective Fluorescent Sensing Platform for the Label‐Free Detection of Iron(III) Ions and Dopamine

A facile, economic and green one‐step hydrothermal synthesis route using dopamine as source towards photoluminescent carbon nanoparticles (CNPs) is proposed. The as‐prepared CNPs have an average size about 3.8 nm. The emission spectra of the CNPs are broad, ranging from approximately 380 (purple) to approximately 525 nm (green), depending on the excitation wavelengths. Due to the favorable optical properties, the CNPs can readily enter into A549 cells and has been used for multicolor biolabeling and bioimaging. Most importantly, the as‐prepared CNPs contain distinctive catechol groups on their surfaces. Due to the special response of catechol groups to Fe³⁺ ions, we further demonstrate that such wholly new CNPs can serve as a very effective fluorescent sensing platform for label‐free sensitive and selective detection of Fe³⁺ ions and dopamine with a detection limit as low as 0.32 μM and 68 nM , respectively. The new “mix‐and‐detect” strategy is simple, green, and exhibits high sensitivity and selectivity. The present method was also applied to the determination of Fe³⁺ ions in real water samples and dopamine in human urine and serum samples successfully.     

The Change in Antioxidant Properties of Dextran‐Coated Redox Active Nanoparticles Due to Synergetic Photoreduction–Oxidation

Nanoparticles have proven to be novel material with resourceful applications in the field of nanomedicine. Cerium oxide nanoparticles (CNPs) coated with dextran (Dex–CNPs) have been shown to exhibit anticancer properties which is attributed to the change in oxidation states mediated at the oxygen vacancies on the surface of CNPs. In this study, the extreme sensitivity of Dex–CNPs to visible light is demonstrated using room light with a clear indication of synergetic phenomenon of photoreduction of CNPs in the presence of dextran which undergoes simultaneous oxidation. The phenomenon was further confirmed through a systematic time‐based expedited study using a high intensity visible light source. The physiochemical changes of Dex–CNPs such as dispersion stability, pH, surface chemistry, antioxidant property, cytotoxicity and the surrounding microenvironment of Dex–CNPs were significantly altered on exposure to visible light, thereby affecting the biological response. Given the significance of nanoparticles which are widely researched nanomaterials, in different fields of nanotechnology and biomedicine, this study demonstrates the significant changes in physiochemical properties of Dex–CNPs with light. The photoreduction of Dex–CNPs affects its bifunctional applications in cancer therapy and thereby this study puts forward the necessity to preserve and sustain their properties through proper storage.     

One‐Step Synthesis of Graphitic Nanoplatelets that are Decorated with Luminescent Carbon Nanoparticles as New Optical‐Limiting Materials

Graphitic nanoplatelets (GNPs) and luminescent carbon nanoparticles (CNPs) are simultaneously synthesized by controlling the laser parameters and the size of the graphite flakes. Because luminescent CNPs are attached onto GNPs, a new carbon nanostructure is obtained. Compared with carbon black, GNPs, and luminescent CNPs alone, this nanostructure shows better optical‐limiting (OL) effects. The OL mechanism of GNPs that are decorated with luminescent CNPs can mainly be attributed to nonlinear scattering. The role of luminescent CNPs is to promote the formation and growth of nonlinear scattering bubbles, thereby enhancing their optical‐limiting effects.     

Evaluation of the enantioselectivity of carbon nanoparticles‐modified chiral separation systems using dextrin as chiral selector by capillary electrokinetic chromatography

Nanoparticles (NPs) can be used as pseudostationary phases (PSPs) in EKC, which is similar to the use of micelle additives as applied in MEKC. To date, the use of NPs to enhance enantiomeric separation by EKC with β‐CD or its derivative as chiral selector has been reported only in two papers. However, to the best of our knowledge, there has been no prior effort to use NPs for achieving enantioseparation with polysaccharides as chiral selector. This paper describes for the first time the use of carbon nanoparticles (CNPs) as PSPs to modify chiral separation system employing dextrin as chiral selector for the enantioseparations of several basic drugs in capillary EKC. Three different types of CNPs, including carbogenic nanoparticles (NPs), carboxylated single‐walled carbon nanotubes, and carboxylated multiwalled carbon nanotubes, were used as running buffer additives, respectively. The potential of the PSPs and the effects of dextrin concentration, buffer pH, and buffer concentration on the enantioseparations were evaluated. Four pairs of tested enantiomers were successfully resolved in less than 15 min with the resolution values in the range of 1.41–4.52 under optimized conditions. Compared to the buffer without NPs, the introduction of NPs into the buffer enhanced the separation of the enantiomers.     

Near-infrared DC approach by Bi<Superscript>3+</Superscript>–Yb<Superscript>3+</Superscript> co-doped YAG phosphor

Bi³⁺–Yb³⁺ ion pair co-doped YAG phosphors were successfully synthesized using conventional solid state reaction method varying the concentration of Yb³⁺ ions from 0.5 to 10 mol%. The optimum phosphors were characterized by powder X-ray diffraction (XRD), and surface morphology was studied with a scanning electronic microscope (SEM). The photoluminescence (PL) properties were studied with a spectrophotometers in near infrared (NIR) and ultraviolet visible (UV-Vis) regions. The synthesized phosphors can convert a photon of UV region (330 nm) into photons of NIR region (979 and 992 nm). The co-operative energy transfer (CET) was studied using a time decay curve and PL spectra. The theoretical value of quantum efficiency (QE) was calculated from steady time decay measurement, and the maximum efficiency approached up to 166.91 %. Hence, this phosphor could be used as a downconversion (DC) luminescent convertor in front of crystalline silicon solar cell (c-Si) panels to reduce heat loss due to spectral mismatch of the solar cells.     

Carbon nanoparticles from corn stalk soot and its novel application as stationary phase of hydrophilic interaction chromatography and per aqueous liquid chromatography

Carbon nanoparticles (CNPs) (6–18 nm in size) were prepared by refluxing corn stalk soot in nitric acid. The obtained acid-oxidized CNPs are soluble in water due to the existence of carboxylic and hydroxyl groups. ¹³C NMR measurement shows the CNPs are mainly of sp² and sp³ carbon structure different from CNPs obtained from candle soot and natural gas soot. Furthermore, these CNPs exhibit unique photoluminescence properties. Interestingly, the CNPs might be exploited to immobilize on the surface of porous silica particles as chromatographic stationary phase. The resultant packing material was evaluated by high-performance liquid chromatography, indicating that the new stationary phase could be used in hydrophilic interaction liquid chromatography (HILIC) and per aqueous liquid chromatography (PALC) modes. The separation of five nucleosides, four sulfa compounds and safflower injection was achieved by using the new column in the HILIC and PALC modes, respectively.     

Preparation of highly luminescent nitrogen and sulfur co-doped carbon nanoparticles for iron(Ⅲ) ions detection and cell imaging

Highly photoluminescent nitrogen and sulfur co-doped carbon nanoparticles (CNPs) ca. 56 nm have been prepared through a green one-step hydrothermal synthesis route by using millet powder as carbon sources, in which the nitrogen and sulfur co-doping improves the photoluminescent efficiency of the CNPs. The as-prepared CNPs display excellent fluorescent properties and low biotoxicity with a relatively high quantum yield of 30.4%, which have been applied for bioimaging and highly sensitive and selective detection of iron (Ⅲ) ions.     

Determination of organic additives in mortars by near-IR spectroscopy. A novel approach to designing a sample set with high-variability components

Industrial mortars consist primarily of a mixture of cement and an aggregate plus a small amount of additives that are used to modify specific properties. Using too high or too low additive rates usually results in the loss of desirable properties in the end product. This entails carefully controlling the amounts of additives added to mortar in order to ensure correct dosing and/or adequate homogeneity in the final mixture. Near-IR (NIR) spectroscopy has proved effective for this purpose as it requires no sample pretreatment and affords expeditious analyses. The purpose of this work was to determine two organic additives (viz. Ad1 and Ad2) in mortars by using partial least squares regression multivariate calibration models constructed from NIR spectroscopic data. The additives are used to expedite setting and increase cohesion between particles in the mortar. In order to ensure that the sample set contained natural variability in the samples, we used a methodology based on experimental design to construct a representative set of samples. This novel design is based on a hexagonal antiprism that encompasses the concentration ranges spanned by the analytes and the variability inherent in each additive. The D-optimality criterion was used to obtain various combinations between Ad1 and Ad2 additive classes. The partial least squares calibration models thus constructed for each additive provided accurate predictions: the intercept and the slope of the plots of predicted values versus reference values for each additive were close to 0 and 1, respectively, and their confidence ranges included the respective value. The ensuing analytical methods were validated by using an external sample set.     

Optical characterization of polycarbonate: Influence of additives on optical properties

In laser transmission welding of thermoplastics the optical properties of the joining parts determine the quality of the welding result. Especially, the scattering of laser radiation in the transparent welding part has an impact on weld seam properties. This scattering is caused by additives. For polycarbonate (PC) with different additives the transmittance, the reflectance and the collimated transmittance are measured with a UV‐VIS‐NIR spectrometer. From this data, the optical properties, such as scattering coefficient, absorption coefficient, and anisotropy factor are calculated. The calculations are made with the aid of the four‐flux model of radiation transport in the diffusive approximation. The results show that the additives have a significant influence on the scattering coefficient. For most additives under consideration the scattering is forward directed, which means that most of the radiation is transmitted into the absorbing welding part. However, the power density distribution of the transmitted radiation may differ significantly from PC without additives. So, the weld seam may also differ due to different additives. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 451–455, 2010     

Purification of multiwalled carbon nanotubes by annealing and extraction based on the difference in van der Waals potential

The potential energies of van der Waals interactions between two multiwalled carbon nanotubes (MWNTs) as well as two carbon nanoparticles (CNPs) were calculated and compared on the basis of the continuum Lennard-Jones model. The well depth of the potential is 1 order of magnitude higher for MWNTs than for CNPs, indicating that MWNTs and CNPs can be separated from each other through polymer-induced steric stabilization. On the basis of this prediction, a novel method for the purification of MWNTs was proposed. The method involves a high-temperature annealing (2600 degrees C, 1 h) followed by an extraction treatment with a selected dispersing agent. While the annealing process evaporates the metal particles, the extraction treatment removes CNPs. The quality of the nanotubes obtained after purification was examined by laser Raman, thermogravimetric analysis, and electron microscopy observations.     

Understanding the Impact of Bismuth Heterovalent Doping on the Structural and Photophysical Properties of CH3NH3PbBr3 Halide Perovskite Crystals with Near-IR Photoluminescence

A comprehensive study unveiling the impact of heterovalent doping with Bi³⁺ on the structural, semiconductive, and photoluminescent properties of a single crystal of lead halide perovskites (CH₃NH₃PbBr₃) is presented. As indicated by single-crystal XRD, a perfect cubic structure in Bi³⁺-doped CH₃NH₃PbBr₃ crystals is maintained in association with a slight lattice contraction. Time-resolved and power-dependent photoluminescence (PL) spectroscopy illustrates a progressively quenched PL of visible emission, alongside the appearance of a new PL signal in the near-infrared (NIR) regime, which is likely to be due to energy transfer to the Bi sites. These optical characteristics indicate the role of Bi³⁺ dopants as nonradiative recombination centers, which explains the observed transition from bimolecular recombination in pristine CH₃NH₃PbBr₃ to a dominant trap-assisted monomolecular recombination with Bi³⁺ doping. Electrically, it is found that the mobility in pristine perovskite crystals can be boosted with a low Bi³⁺ concentration, which may be related to a trap-filling mechanism. Aided by temperature (T)-dependent measurements, two temperature regimes are observed in association with different activation energies (E_a) for electrical conductivity. The reduction of E_a at lower T may be ascribed to suppression of ionic conduction induced by doping. The modified electrical properties and NIR emission with the control of Bi³⁺ concentration shed light on the opportunity to apply heterovalent doping of perovskite single crystals for NIR optoelectronic applications.     

Effect of Material Structure and Additives on the Optical Properties of PP Cast Films

Summary. Polypropylene homopolymer and ethylene/propylene-random-copolymer cast films formulated with slip, anti-blocking, and acid scavenger aids were analyzed as to material structure and optical properties. The structural and topographical characterization was done by atomic force microscopy and by spectroscopic methods. Optical properties were determined using a hazemeter and an UV/VIS/NIR spectrophotometer. As to the effect of additives it was established that slip and anti-blocking aids migrate to and accumulate on the surface, resulting in increased surface roughness and larger scattering identities close to the surface. Acid scavenger additives were shown to contribute to less significant slip aid domains and hence to lower haze. In general, films without additives showed much better optical properties. The separation of haze into its bulk and surface components revealed that the total haze is dominated by surface haze.     

Effect of Material Structure and Additives on the Optical Properties of PP Cast Films

Polypropylene homopolymer and ethylene/propylene-random-copolymer cast films formulated with slip, anti-blocking, and acid scavenger aids were analyzed as to material structure and optical properties. The structural and topographical characterization was done by atomic force microscopy and by spectroscopic methods. Optical properties were determined using a hazemeter and an UV/VIS/NIR spectrophotometer. As to the effect of additives it was established that slip and anti-blocking aids migrate to and accumulate on the surface, resulting in increased surface roughness and larger scattering identities close to the surface. Acid scavenger additives were shown to contribute to less significant slip aid domains and hence to lower haze. In general, films without additives showed much better optical properties. The separation of haze into its bulk and surface components revealed that the total haze is dominated by surface haze.     

Highly fluorescent cotton fiber based on luminescent carbon nanoparticles via a two-step hydrothermal synthesis method

A kind of highly fluorescent cotton fibers, in which the luminescent carbon nanoparticles (CNPs) are generated in the lumen and the mesopores directly, have been prepared by the method of hydrothermal synthesis in situ using citric acid and urea as raw materials, and hexadecyl trimethyl ammonium bromide and tributyl phosphate as active agents. The CNPs/cotton fibers were characterized by thermogravimetry-differential thermal analysis (TG-DTA), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and X-ray photoelectron spectroscopy (XPS), respectively. The optical properties are investigated by fluorescence spectrofluorometry and PR-305 long afterglow phosphors tester. The results showed that the CNPs were self-assembled successfully in the lumen as well as in the mesopores of cotton fibers. The CNPs/cotton fibers could emit bright and colorful photoluminescence under excitation lights of different wavelengths. The afterglow decay process could be divided into fast decay and slow decay stages and the emission of CNPs/cotton fiber had two peaks at 450 nm and 570 nm respectively when the wavelength of excitation changed from 310 nm to 500 nm. The preparation of highly fluorescent cotton fibers by self-assembly method has great significance to the functionalization of cotton fibers.     

Strong near-infrared luminescence in BaSnO3

Powdered samples of the perovskite BaSnO(3) exhibit strong near-infrared (NIR) luminescence at room temperature, following band-gap excitation at 380 nm (3.26 eV). The emission spectrum is characterized by a broad band centered at 905 nm (1.4 eV), tailing on the high-energy side to approximately 760 nm. The Stokes shift is 1.9 eV, and measured lifetimes in the range 7-18 ms depend on preparative conditions. These extraordinary long values indicate that the luminescence involves a defect state(s). At low temperatures, both a sharp peak and a broad band appear in the visible portion of the luminescence spectrum at approximately 595 nm. Upon cooling, the intensity of the NIR emission decreases, while the integrated intensities of the visible emission features increase to approximately 40% of the NIR intensity at 77 K. Room-temperature photoluminescence (PL) is observed across the Ba(1-x)Sr(x)SnO(3) series. As the strontium content increases, the excitation maximum and band gap shift further into the UV, while the intensity of the NIR emission peak decreases and shifts further into the infrared. This combination leads to an unexpectedly large increase in the Stokes shift. The unusual NIR PL in BaSnO(3) may originate from recombination of a photogenerated valence-band hole and an occupied donor level, probably associated with a Sn(2+) ion situated roughly 1.4 eV above the valence-band edge.