Heat Transfer on the Surface on a Spherically Blunted Cone Exposed to a Supersonic Spatial Flow with Injection of a Coolant Gas

The heattransfer processes in a supersonic spatial flow around a spherically blunted cone with allowance for heat overflow along the longitudinal and circumferential coordinates and injection of a coolant gas are studied numerically. The prospects of using highly heatconducting materials and injection of a coolant gas for reduction of the maximum temperatures at the body surface are demonstrated. The solutions of the direct and inverse problems in one, two, and threedimensional formulations for different shell materials are compared. The error of the thinwall method in determining the heat flux on the heatloaded boundary of the body is estimated.     

Spatial Simple Waves on a Shear Flow

The paper studies simple waves of the shallowwater equations describing threedimensional wave motions of a rotational liquid in a freeboundary layer. Simple wave equations are derived for the general case. The existence of unsteady or steady simple waves adjacent continuously to a given steady shear flow along a characteristic surface is proved. Exact solutions of the equations describing steady simple waves were found. These solutions can be treated as extension of Prandtl–Mayer waves for sheared flows. For shearless flows, a general solution of the system of equations describing unsteady spatial simple waves was found.     

Propagation of Linear Waves in Gas‐Saturated Porous Media with Allowance for Interphase Heat Transfer

The effect of gas–skeleton heattransfer processes on propagation of fast and slow waves in a porous medium is examined. Frequency intervals are identified, in which attenuation of waves in a gassaturated porous medium is mainly controlled by the heattransfer processes.     

A Numerical Study of the Critical Gas Saturation in a Porous Medium

We use porenetwork simulations to study the dependence of the critical gas saturation in solutiongas drive processes on the geometric parameters of the porous medium. We show that for a variety of growth regimes (including global and local percolation, instantaneous and sequential nucleation, and masstransfer driven processes), the critical gas saturation, Sgc, follows a powerlaw scaling with the final nucleation fraction (fraction of sites activated), fq. For 3D processes, this relation reads Sgcfq0.16, indicating a sensitive dependence of Sgc to fq at very small values of fq.     

Unsteady Radiative–Convective Heat Transfer in a Flow Emitting‐Absorbing and Scattering Medium around an Ablating Plate

A conjugate problem of radiative–convective heat transfer in a turbulent hightemperature gasdisperse flow around a thermally thin ablating plate is considered. The plate experiences intense radiative heating by an external source, which is a blackbody. The temperature fields and the distributions of heat fluxes along the plate under unsteady conditions are calculated. The data gained make it possible to examine the effect of the Stark number and phasetransition heat in the plate material on the time evolution of the thermal state of the boundarylayer medium and the plate itself being heated by a hightemperature radiation source.     

Effect of Porous Coatings on Stability of Hypersonic Boundary Layers

The influence of ultrasoundabsorbing coatings on stability of hypersonic boundary layers is considered. Two types of coatings were used in experiments: feltmetal with a random porous microstructure and a sheet perforated by blind cylindrical microchannels. The experiments were performed in a wind tunnel at a Mach number M = 5.95 on sharp cones with a 7° apex halfangle. Evolution of natural disturbances and artificially induced wave packets in the boundary layer was studied with the help of hotwire anemometry. Spatial characteristics of artificial disturbances were obtained. It is demonstrated that such coatings exert a stabilizing effect on secondmode disturbances.     

Calculation of Ionization and Radiative Characteristics of Air in the Shock Layer on the Basis of Various Models of Vibration–Dissociation Interaction

Models of vibrationdissociation interaction are verified on the basis of results of numerical simulation of nonequilibrium air flow in the shock layer near vehicles flying in the atmosphere and data of inflight and windtunnel experiments on measurement of ionization and radiative characteristics of the shock layer.     

Disruption of Shaped‐Charge Jets by a Pulsed Current

This paper gives results from experimental studies of the effect of electricpulse parameters on the development of current instability and disruption of shapedcharge jets. A simple physical model for the development of current instability and the decrease in the cavern depth in the target is proposed. Notations are introduced and analytical expressions are obtained for the critical current (critical linear current density) and the ideal shape of the current pulse required for the disruption of shapedcharge jets. It is shown that the estimate of the final cavern depths in steel target for the proposed model is in fairly good agreement with both experimental values of cavern depths in targets and with the results of numerical calculations using quasitwodimensional unsteady models of MHD instability and volume disruption.     

Exact solutions and mathematical properties of boundary‐value problems for dynamic‐diffusion boundary layers

The paper studies boundaryvalue problems for dynamicdiffusion boundary layers occurring near a vertical wall at high Schmidt numbers and for dynamic boundary layers whose inner edge is adjacent to the dynamicdiffusion layers. Exact solutions for boundary layers at small and large times are derived. The wellposedness of the boundaryvalue problem for a steady dynamicdiffusion layer is studied.     

Model of a plastically compressible material and its application to the analysis of the compaction of a porous body

This paper considers a model of a plastically compressible porous medium with a cylindricaltype yield condition and its associated constitutive relations, which ensure independent mechanisms of shear and compaction of the porous material. This allows one to use the wellknown theorems of plastic theory to analyze plastically compressible media and obtain analytical solutions for a number of boundaryvalue problems, including those taking into account conditions on strongdiscontinuity surfaces. Results from fullscale studies of the structural periodicity of noncompact materials using wavelet analysis were employed to choose a physical model for a porous body and determine the properties and dimensions of a representative volume. The problem of extrusion of a porous material through a conical matrix was solved.     

Asymptotic Modeling of Nonlinear Wave Processes in Shock‐Loaded Elastoplastic Materials

Nonlinear wave processes in shockloaded elastoplastic materials are modeled. A comparison of the results obtained with experimental data and numerical solutions of exact systems of dynamic equations shows that the model equations proposed qualitatively describe the stressdistribution evolution in both the elasticflow and plasticflow regions and can be used to solve one and twodimensional problems of pulsed deformation and fracture of elastoplastic media.     

Transverse Decay of Solutions in an Elastic Cylinder

In a semiinfinite cylinder composed of anisotropic linearised elastic material, loaded on the base and clamped along the lateral surface, it is known that the solution as measured, for example, by the strainenergy flux through a plane crossection decays longitudinally at most exponentially with respect to the axial distance from the base. There is, however, also a transverse radial decay of the solution, again measured for example by the strainenergy, occurring from the region close to the cylinder's axis to the region near the lateral surface, where the energy vanishes.This problem is considered in the present paper which discusses a circular semiinfinite cylinder and derives an estimate for the strainenergy contained in a cylindrical annulus at a given distance from the base and of variable height, and whose outer surface coincides with the lateral surface of the cylinder. It is shown that the strainenergy decays at most algebraically to zero as the inner radius of the annulus increases to that of the cylinder.Sommario. E'noto che in un cilindro semiinfinito composto da materiale elastico lineare anisotropo, caricato sulla base ed incastrato lungo la superficie laterale, la soluzione elastica, misurata, per esempio, dal flusso di energia di deformazione attraverso una sezione trasversale piana, decade con legge al più esponenziale con la distanza dalla base. C'è tuttavia, anche un decadimento radiale della soluzione, misurato, per esempio, dall'energia di deformazione che passa dalla regione vicina all'asse del cilindro a quella vicin alla superficie laterale dove l'energia si annullaQuesto problema è qui studiato. Si discute in particolare un cilindro circolare semiinfinito e si deduce una stima per l'energia di deformazione contenuta in un anello cilindrico ad una distanza assegnata dalla base e di altezza variabile, e la cui superficie esterna coincide con la superficie laterale del cilindro. Si dimostra che l'energia di deformazione decade al più con legge algebrica a zero quando il raggio interno del cilindro si avvicina a quello esterno.     

Effect of Dynamic Prehistory on Aerodynamics of a Laminar Separated Flow in a Channel Behind a Rectangular Backward‐Facing Step

The effect of dynamic prehistory of the flow and the channelexpansion ratio on aerodynamics of a steady separated laminar flow behind a rectangular backwardfacing step located in a planeparallel channel is numerically studied. It is shown that the boundary layer upstream of the flow separation exerts a strong effect on flow characteristics behind the step. A decrease in the boundarylayer thickness in the cross section of the step leads to a decrease in the separationregion length, and an increase in the channelexpansion ratio with a fixed initial boundarylayer thickness and Reynolds number leads to an increase in the separationregion length.     

Evolution of the Diffusion Mixing Layer of Two Gases upon Interaction with Shock Waves

A mathematical model of mechanics of a twovelocity twotemperature mixture of gases is developed. Based on this model, evolution of the mixing layer of two gases with different densities under the action of shock and compression waves is considered by methods of mathematical simulation in the onedimensional unsteady approximation. In the asymptotic approximation of the full model, a solution of an initialboundary problem is obtained, which describes the formation of a diffusion layer between two gases. Problems of interaction of shock and compression waves with the diffusion layer are solved numerically in the full formulation. It is shown that the layer is compressed as the shock wave traverses it; the magnitude of compression depends on shockwave intensity. As the shock wave passes from the heavy gas to the light gas, the mixing layer becomes overcompressed and expands after shockwave transition. The wave pattern of the flow is described in detail. The calculated evolution of the mixinglayer width is in good agreement with experimental data.     

Effect of heat flow on heat‐transfer characteristics for a supersonic spatial flow around a spherically blunted cone

Heattransfer processes for a supersonic spatial flow around a spherically blunted cone were studied by solving direct and inverse threedimensional problems taking into account heat flow along the longitudinal and circumferential coordinates. It is shown that highly heatconducting materials can be used to advantage to decrease the maximum temperatures on the windward side of streamline bodies.     

Origination of In‐Phase Oscillations of Thin Plates with Aeroelastic Interaction

Synchronization of oscillations of thin elastic plates that are walls of a gasfilled channel is considered. The gas motion is described by a system of Navier–Stokes equations, which is solved using the secondorder MacCormack method with time splitting. The motion of the channel walls is described by a system of geometrically nonlinear dynamic equations of the theory of this plates, which is solved by the finitedifference method. Kinematic and dynamic contact conditions are imposed at the interface between the media. A numerical experiment is performed to determine typical dynamic regimes and study the transition of the aeroelastic system to inphase oscillations.     

Torsion of Thin Tubes With Multicell Cross‐Section

It is known that the classical technical theories of Bredt and of sectorial areas are the variational limit of the SaintVenant torsion problem for hollow homogeneous isotropic cylinders with thin doubly connected crosssection when the wall thickness reaches zero. The main goal of this paper is to prove that the same result remains true for thin tubes with multicell crosssection.Sommario. E noto che le classiche teorie tecniche di Bredt e delle aree settoriali sono il limite variazionale del problema della torsione alla De SaintVenant per cilindri lunghi con sezione cava biconnessa quando lo spessore della parete tende a zero. In questo lavoro si estende il risultato alle sezioni multiconnesse con ordine di connessione qualsiasi.     

Interaction of Large‐Scale and Small‐Scale Oscillations During Separation of a Laminar Boundary Layer

The mutual influence of shortwave oscillations (instability waves of the separated boundary layer) and longwave disturbances at the frequency of shedding of periodic largescale vortices is experimentally studied in flow separation behind a step. The possibility of controlling the process of vortex formation by exciting amplifying disturbances in the shear layer is demonstrated.