Dinitramide and its salts

Dinitramide readily adds to acrolein, methyl vinyl ketone, and phenyl vinyl ketone, but not to acrylonitrile or methyl acrylate. Treatment of dinitro compounds (O₂N)₂NCH₂CH₂COR (R = H, Me, Ph, OMe) with bases results in dinitramide salts in 66–83 % yields.For part 1, see Ref. 1.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1264–1266, July, 1994.     

Synthetic transformations of higher terpenoids: XXV. Cross coupling of phlomisoic acid methyl ester with alkenes in the presence of oxidants

The reaction of phlomisoic acid methyl ester with styrene, catalyzed by Pd(OAc)₂, in the presence of Cu(OAc)₂ and 1,4-benzoquinone in a mixture of propionic acid with diethyl ether gave the corresponding 15,16-distyryl derivative and only traces of 15- and 16-monosubstituted furanolabdanoids. Oxidative coupling of the title compound with methyl acrylate under analogous conditions afforded a mixture of 15-mono-, 16-mono-, and 15,16-dialkenylation products whose ratio changed during the process. The reaction was stereoselective, and the exocyclic double bond in the products had exclusively E configuration.     

Reaction of coordinated phosphines—II: Arylation of substituted olefins by palladium(II) acetate and triarylphosphine

Phenylation of 1-octene, cyclohexene, styrene, acrylonitrile, vinyl acetate, ethyl acrylate, and ethyl but-3-enoate with Pd(PAr₃)₂(OAc)₂ was carried out in acetic acid at 50°. para-Substituted triphenylphosphine palladium acetate complex produced corresponding para substituted phenyl derivatives.     

Michael additions to acrylonitrile,methyl acrylate and methyl vinyl ketone to Nb-benzylidenetryptophan methyl ester

Michael addition to methyl acrylate and methyl vinyl ketone of N_b-benzylidene-L-tryptophan methyl ester 1 gave 2-(3-indolylmethyl)glutamic dimethyl ester 2a and α-(3-oxobutyl)tryptophan methyl ester 2b respectively. Addition to acrylonitrile of 1 yielded α,N_a-dicyanoethyltryptophan methyl ester 3 .     

Catalytic, asymmetric aza-Baylis-Hillman reaction of N-sulfonated imines with activated olefins by quinidine-derived chiral amines

The chiral nitrogen Lewis base, tricyclic cinchona alkaloid derivative TQO, is an effective promoter in the catalytic, asymmetric aza‐Baylis–Hillman reaction of N‐sulfonated imines Ar? CH?NR′ 1 (R′ = Ts, Ms, Ns, SES) with various activated olefins such as methyl vinyl ketone (MVK), ethyl vinyl ketone (EVK), acrolein, methyl acrylate, phenyl acrylate, or α‐naphthyl acrylate to give the corresponding adducts in moderate to good yields with good to high ee (up to 99 %) at ?30 °C or 45 °C in various solvents, including DMF/MeCN (1:1, v/v). The first such reaction of 1 with the simplest Michael acceptor MVK and methyl acrylate has been achieved with excellent enantioselectivity. The adducts derived from MVK and EVK had the opposite absolute configuration to those from acrolein, methyl acrylate, phenyl acrylate, and α‐naphthyl acrylate. A plausible mechanism has been proposed on the basis of previous reports and the authors’ investigations. An effective bifunctional chiral nitrogen Lewis base–Brønsted acid system has been revealed in this type of aza‐Baylis–Hillman reaction.     

Morita-Baylis-Hillman route to 4H-pyrrolo[1,2-a][1]benzazepine derivatives

A simple method for synthesizing substituted 4H-pyrrolo[1,2-a][1]benzazepines using acid-assisted cyclization of the Morita-Baylis-Hillman adducts of 2-(1H-pyrrol-1-yl)benzaldehydes with methyl acrylate or methyl vinyl ketone as a key step has been developed.     

Aza-Morita–Baylis–Hillman reaction with ion-supported Ph3P

Various N-tosyl arylimines reacted with methyl vinyl ketone and ethyl vinyl ketone in the presence of ion-supported Ph₃P A and B to give adducts, N-(2′-methylene-3′-oxo-1′-arylbutyl)-4-methylbenzenesulfonamides and N-(2′-methylene-3′-oxo-1′-arylpentyl)-4-methylbenzenesulfonamides, respectively, in good yields with high purity by simple diethyl ether extraction of the reaction mixture. Moreover, ion-supported Ph₃P A and B could be repeatedly used for the same reaction to provide the corresponding adducts while maintaining good yields with high purity.     

THE BAYLIS—HILLMAN REACTION: TiCl4 MEDIATED COUPLING OF ALKYL VINYL KETONES WITH α-KETO ESTERS AND ALDEHYDES

TiCl₄ mediated coupling of alkyl vinyl ketones with α-keto esters and aldehydes provides respectively 2-aryl-2-hydroxy-3-methylene-4-oxoalkanoates and (Z)-keto allyl chlorides in 1 h time at room temperature. Similar coupling of trifluoromethyl phenyl ketone with methyl vinyl ketone produces 1,1,1-trifluoro-2-hydroxy-2-phenyl-3-methylenepentan-4-one.     

Iron powder and tin/tin chloride as new reducing agents of Meerwein arylation reaction with unexpected recycling to anilines

Abstract

Simple and rapid route for Meerwein arylation reaction using iron powder or a mixture of tin/tin chloride has been developed. In the presence of iron powder, different aryl diazonium salts reacted with methyl vinyl ketone, acrylates, and isopropenyl acetate. Production of oximes was detected as the main product with acrylates or in a mixture with β-aryl methyl ketones in the case of methyl vinyl ketone. The in situ produced HNO₂ from an excess of NaNO₂/HCl was trapped by alkyl aryl radical to form oximes in the E configuration form. The presence of tin/tin chloride mixture in the reaction of the aryl diazonium salts with methyl vinyl ketone produced Michael products along with β-aryl methyl ketones. The predicted α-aryl methyl ketones from the reaction of isopropenyl acetate with the diazotized anilines were obtained using iron or tin/tin chloride mixture.     

Combined Experimental and Computational Investigations of Rhodium‐Catalysed CH Functionalisation of Pyrazoles with Alkenes

Detailed experimental and computational studies have been carried out on the oxidative coupling of the alkenes C₂H₃Y (Y=CO₂Me ( a ), Ph ( b ), C(O)Me ( c )) with 3‐aryl‐5‐R‐pyrazoles (R=Me ( 1 a ), Ph ( 1 b ), CF₃ ( 1 c )) using a [Rh(MeCN)₃Cp*][PF₆]₂/Cu(OAc)₂ ? H₂O catalyst system. In the reaction of methyl acrylate with 1 a , up to five products ( 2 aa – 6 aa ) were formed, including the trans monovinyl product, either complexed within a novel Cu^I dimer ( 2 aa ) or as the free species ( 3 aa ), and a divinyl species ( 6 aa ); both 3 aa and 6 aa underwent cyclisation by an aza‐Michael reaction to give fused heterocycles 4 aa and 5 aa , respectively. With styrene, only trans mono‐ and divinylation products were observed, whereas with methyl vinyl ketone, a stronger Michael acceptor, only cyclised oxidative coupling products were formed. Density functional theory calculations were performed to characterise the different migratory insertion and β‐H transfer steps implicated in the reactions of 1 a with methyl acrylate and styrene. The calculations showed a clear kinetic preference for 2,1‐insertion and the formation of trans vinyl products, consistent with the experimental results.     

Aza-Baylis-Hillman reaction of salicyl N-tosylimines with methyl vinyl ketone, ethyl vinyl ketone or phenyl vinyl ketone

Reactions of salicyl N-tosylimines with methyl vinyl ketone, ethyl vinyl ketone or phenyl vinyl ketone proceeded smoothly under mild conditions to give the corresponding chromanes or aza-Baylis-Hillman adducts in moderate to excellent yields in the presence of phosphine or nitrogen Lewis base.     

Multifunktionellebis-(trifluormethyl)-substituierte Synthesezwischenstufen aus 4,4-Bis-(trifluormethyl)-1-oxa-3-azabuta-1,3-dienen viaBaylis-Hillman Reaktion

Summary TheBaylis-Hillman reaction of 4,4-bis-(trifluoromethyl)-1-oxa-3-azabuta-1,3-dienes with acrolein, methyl vinyl ketone, ethyl vinyl ketone, acrylonitrile, ethyl acrylate, andn-butyl acrylate provides useful multifunctional partial fluorinated building blocks in one step.

Prof. Dr. Rolf Huisgen zum 75. Geburtstag gewidmet     

Oxidation of 1-methylcyclobutanol by Pb(IV) and Mn(III) compounds

The main product of the reaction of 1-methylcyclobutanol with Pb(OAc)₄ in benzene is 1-phenyl-4-pentanone; the use of Mn(OAc)₃ in acetic acid gives a mixture of 2,9-decanedione and methyl propyl ketone; 1-(chloro-, bromo-, thiocyano-, or cyano)-4-pentanone is formed in the presence of the systems Pb(OAc)₄-metal halide or Mn(OAc)₃-metal halide.N. D. Zelinskii Institute of Organic Chemistry, Russian Academy of Sciences, 117913 Moscow. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 12, pp. 2760–2763, December, 1992.     

Asymmetric Michael addition promoted by (R,R)-trans-1,2-diaminocyclohexane in ionic liquids

In tetrafluoroborate based ionic liquids fair yields and enantiomeric excesses up to 91% were obtained in the Michael addition of ethyl cyclohexanone-2-carboxylate to methyl vinyl ketone, using (R,R)-trans-1,2-diaminocyclohexane as chiral auxiliary (37% mol/mol with respect to the donor). The presence of catalytic amounts of metal sources [Ni(OAc)₂ · 4H₂O, Co(acac)₂, FeCl₃ · 6H₂O, LaCl₃, Cu(OAc)₂ · H₂O] did not improve the activity, and, in some instances, caused a drop of enantioselectivity. Reactions carried out in the absence of any metal and with a Michael donor/diamine molar ratio of 20 allowed us to ascertain that the reaction can be performed catalytically.     

Modification of Vinylformamide by Michael Addition to Methyl Acrylate and Methyl Vinyl Ketone,and Copolymers Derived from the Resulting Products

Vinylformamide reacts with methyl acrylate and methyl vinyl ketone under conditions of base catalysis, following the Michael addition pattern, to give methyl 3-(vinylformylamino)propionate and previously unknown 4-(vinylformylamino)-2-butanone. Radical copolymerization of these compounds with vinylformamide and N-vinylpyrrolidone was studied.     

Effect of ketones on the equilibrium between peroxy radicals carrying the chains of cyclohexanol oxidation with molecular oxygen

The influence of methyl phenyl ketone and diphenyl ketone on the kinetics of cyclohexanol oxidation initiated by cumyl peroxide at 373 K was studied. The ratio of the chain propagation rate constant involving the 1-hydroxy-1-phenylethylperoxy radical to the equilibrium constant of radical dissociation into methyl phenyl ketone and hydroperoxy radical (k _2.3/K′₂ = 900 L² mol^?2 s^?1) was determined by the selective inhibition method.     

Copolymerization of propylene and methyl vinyl ketone with metallocene catalysts: Synthesis,properties, and thermal and photooxidation of modified polypropylene

The copolymers of propylene and methyl vinyl ketone are synthesized at 60°С by copolymerization in the propylene bulk in the presence of the polymethylaluminoxane-activated metallocene catalysts, namely, the isospecific С₂-symmetric metallocene catalyst rac-Me₂Si(2-Me-4-PhInd)₂ZrCl₂ and the syndiospecific Сs-symmetric metallocene catalyst Ph₂ССpFluZrCl₂, and characterized. It is shown that a noticeable insertion of methyl vinyl ketone into a polypropylene chain is possible during copolymerization initiated by the syndiospecific catalytic system, whereas in the case of the isospecific system, the insertion of methyl vinyl ketone is hindered. The thermal oxidation of the resulting polymers is studied. With the use of chemiluminescence, the accumulation of peroxy macroradicals under the action of daylight in samples based on isotactic and syndiotactic polypropylene is detected. It is found that even a low (0.2 mol %) content of methyl vinyl ketone endows polypropylene with the capability to undergo rapid and controlled degradation under natural conditions.     

IR laser ablative and conventional decomposition of poly(vinyl phenyl ketone): Different processes and different products

Pulsed IR laser ablation of poly(vinyl phenyl ketone) results in the formation of CO, C₁-C₄ hydrocarbons, benzene, styrene and phenylacetylene and affords deposition of polymeric films that were examined by EDX-SEM, FTIR, UV and NMR spectroscopies and gel-permeation chromatography. It is revealed that the structure of the films is affected by laser fluence and their M_w distribution is almost identical to that of poly(vinyl phenyl ketone). The formation of the products is accounted for by cleavages of both polymer backbone and pendant group. Conventional heating of poly(vinyl phenyl ketone) yields CO, formaldehyde, methanol and benzene as major volatile products and affords a solid fraction showing substantial fragmentation of the polymer. The different degradation products from both processes are ascribed to different modes of heating and to the wall effect.     

The Diels-Alder Reaction of Dienes Derived from Substituted 3-(Phenyl-Thio)-3-Sulfolenes

Substituted 3-(phenylthio)-3-sulfolenes (3) and (4) are good precursors for 2-(phenylthio)-1,3-butadienes (5) and (6). The Diels-Alder reaction of the dienes derived from (3) and (4) with various dienophiles was studied. It was found that heating of sulfolenes (3) with methyl propiolate and N-phenylmaleimide afforded the Diels-Alder adducts of (5) directly and with complete regio- and stereospecificity. The same reaction with methyl vinyl ketone gave a mixture of endo and exo addition products. If sulfolenes (3) were first converted to the dienes (5) using lithium aluminum hydride and then reacted with methyl vinyl ketone in the presence of anhydrous zinc chloride, the stereoselectivity could be improved. Sulfolenes (4) also underwent cycloreversion/cycloaddition with methyl acrylate, methyl vinyl ketone, and N-phenylmaleimide, but gave mostly the double bond-isomerized cycloaddition products. The regiochemistry of cycloaddition was delicately dependent on the dienophiles used.     

Surface modification. II. Functionalization of solid surfaces with vinylic monomers

A new method to functionalize surfaces of solid substrates such as glass, silicon crystals, and silica microspheres with appropriate vinylic monomers, i.e., methyl vinyl ketone, methyl acrylate, methacrolein, and acrolein, is described. The surface modification process was performed through the following sequence of reactions: (a) derivatization of the surfaces with to-nitrile groups by interacting the substrates with SiCl₃(CH₂)₃CN; (b) subsequent reduction of the a)-nitrile groups with diborane to w-amine groups; (c) binding of the vinylic monomers to the surfaces via the to-amine groups. pK_1/2 of the surface primary amine groups, as determined by contact angle titration, was found to be 2–4 units lower than the pK_1/2 values of primary amine analogous in solution. Methyl vinyl ketone and methyl acrylate were covalently bound to the amine surfaces only under basic conditions via the Michael addition reaction. Methacrolein and acrolein were covalently bound to the amine surfaces under both acidic and basic conditions via two major reactions: the Michael addition reaction and Schiff base bond formation. The concentration of the aldehyde groups of the surfaces obtained by the reaction with methacrolein and acrolein was significantly higher than that obtained using the common, published method in which glutaraldehyde interacts with the amine surfaces.