Detachment of deposited colloids by advancing and receding air-water interfaces

Moving air-water interfaces can detach colloidal particles from stationary surfaces. The objective of this study was to quantify the effects of advancing and receding air-water interfaces on colloid detachment as a function of interface velocity. We deposited fluorescent, negatively charged, carboxylate-modified polystyrene colloids (diameter of 1 μm) into a cylindrical glass channel. The colloids were hydrophilic with an advancing air-water contact angle of 60° and a receding contact angle of 40°. After colloid deposition, two air bubbles were sequentially introduced into the glass channel and passed through the channel at different velocities (0.5, 7.7, 72, 982, and 10,800 cm/h). The passage of the bubbles represented a sequence of receding and advancing air-water interfaces. Colloids remaining in the glass channel after each interface passage were visualized with confocal microscopy and quantified by image analysis. The advancing air-water interface was significantly more effective in detaching colloids from the glass surface than the receding interface. Most of the colloids were detached during the first passage of the advancing air-water interface, while the subsequent interface passages did not remove significant amounts of colloids. Forces acting on the colloids calculated from theory corroborate our experimental results, and confirm that the detachment forces (surface tension forces) during the advancing air-water interface movement were stronger than during the receding movement. Theory indicates that, for hydrophilic colloids, the advancing interface movement generally exerts a stronger detachment force than the receding, except when the hysteresis of the colloid-air-water contact angle is small and that of the channel-air-water contact angle is large.     

Colloidal wettability probed with X-ray microscopy

Colloids (colloidal particles or nanoparticles) and their in-situ characterizations are important topics in colloid and interface science. In-situ visualization of colloids with X-ray microscopy is a growing frontier. Here, after a brief introduction on the method, we focus on its application for identifying nanoscale wettability of colloidal particles at fluid interfaces, which is a critical factor in colloidal self-assembly. We discuss a quantitative study on colloidal wettability with two microscopic methods: (i) X-ray microscopy by visualizing natural oil–water interfaces and (ii) confocal microscopy by visualizing fluorescently-labeled interfaces. Both methods show consistent estimation results in colloid–fluid interfacial tensions. This comparison strongly suggests a feasibility of X-ray microscopy as a promising in-situ protocol in colloid research, without fluorescent staining. Finally, we address a prospect of X-ray imaging for colloid and interface science.     

Effects of Amplitude of the Radiofrequency Electromagnetic Radiation on Aqueous Suspensions and Solutions

The effects of radiofrequency (RF) (1–4) and magnetic fields (5–9) on the behavior of aqueous solutions and suspensions have been a popular subject in recent years. The mechanism of the magnetic “water memory” effect, though, is still largely unknown (5). In this work, we present evidence that the primary “receptor” of the electromagnetic radiation is a gas/liquid interface. Gas can be either already present in water or produced by the effects of electromagnetic fields. Perturbed gas/liquid interfaces require hours to equilibrate. Certain RF and magnetic signals also produce reactive oxygen and hydrogen species (superoxide, hydrogen peroxide, hydrogen, atomic hydrogen). The perturbed gas/liquid interface modifies the hydrogen bonding networks in water and also the hydration of ions and interfaces. Careful outgassing removes all of the effects of the electromagnetic fields, including the magnetic memory effect. The amplitude of the applied field influences the observed effects. Different amplitudes of RF radiation perturb the interfacial water in different ways and consequently affect the behavior of colloids and ions in specific manners. For instance, the bulk and template precipitation of calcium carbonate, zeta potentials of suspended colloids, rate of dissolution of colloidal silica, and attachment of colloidal silica to metal surfaces are modified in specific ways with the low amplitude or high amplitude RF treatments described in this paper. The solubility/diffusivity of gas species is also modified in a different manner, and it is probably at the core of the specificity of the RF amplitude effects.     

Enhanced catalytic reaction at an air–liquid–solid triphase interface

Gaseous reactant involved heterogeneous catalysis is critical to the development of clean energy, environmental management, health monitoring, and chemical synthesis. However, in traditional heterogeneous catalysis with liquid–solid diphase reaction interfaces, the low solubility and slow transport of gaseous reactants strongly restrict the reaction efficiency. In this minireview, we summarize recent advances in tackling these drawbacks by designing catalytic systems with an air–liquid–solid triphase joint interface. At the triphase interface, abundant gaseous reactants can directly transport from the air phase to the reaction centre to overcome the limitations of low solubility and slow transport of the dissolved gas in liquid–solid diphase reaction systems. By constructing a triphase interface, the efficiency and/or selectivity of photocatalytic reactions, enzymatic reactions, and (photo)electrochemical reactions with consumption of gaseous reactants oxygen, carbon dioxide, and nitrogen are significantly improved.

Gaseous reactant involved liquid–solid diphase interface reactions can be significantly enhanced using rationally designed and constructed air–liquid–solid triphase systems.     

Resolving the coupled effects of hydrodynamics and DLVO forces on colloid attachment in porous media

Transport of colloidal particles in porous media is governed by the rate at which the colloids strike and stick to collector surfaces. Classic filtration theory has considered the influence of system hydrodynamics on determining the rate at which colloids strike collector surfaces, but has neglected the influence of hydrodynamic forces in the calculation of the collision efficiency. Computational simulations based on the sphere-in-cell model were conducted that considered the influence of hydrodynamic and Derjaguin-Landau-Verwey-Overbeek (DLVO) forces on colloid attachment to collectors of various shape and size. Our analysis indicated that hydrodynamic and DLVO forces and collector shape and size significantly influenced the colloid collision efficiency. Colloid attachment was only possible on regions of the collector where the torque from hydrodynamic shear acting on colloids adjacent to collector surfaces was less than the adhesive (DLVO) torque that resists detachment. The fraction of the collector surface area on which attachment was possible increased with solution ionic strength, collector size, and decreasing flow velocity. Simulations demonstrated that quantitative evaluation of colloid transport through porous media will require nontraditional approaches that account for hydrodynamic and DLVO forces as well as collector shape and size.     

Determination of methylmercury fluxes across the air–water and air–soil interfaces by gas chromatography with electron capture detection

A method for the determination of methylmercury (MeHg) fluxes across the air–water and air–soil interfaces was developed using an in situ chamber. The MeHg in the air coming out of the chamber was captured by a column containing sulfhydryl cotton fiber adsorbent. MeHg was then desorbed from the column by using 2 mol L^–1 HCl. The MeHg in the effluent was extracted with benzene, and determined by gas chromatography with electron capture detection. Finally, the MeHg flux was calculated using the chamber. The method was applied to simulated experiments, and the results showed that the MeHg fluxes in the air–water system were higher than those in the air–soil–water system. The method was also successfully applied to the field measurements of an environment polluted by a chemical factory, and the results showed that the MeHg fluxes across the air–soil and air–water interfaces were 0.21–3.09 and 0.14–0.79 ng m^–2 h^–1, respectively. The method will be a useful tool in the environmental study of MeHg.     

Capillary force required to detach micron-sized particles from solid surfaces—Validation with bubbles circulating in water and 2 μm-diameter latex spheres

The adhesion forces holding micron-sized particles to solid surfaces can be studied through the detachment forces developed by the transit of an air–liquid interface in a capillary. Two key variables affect the direction and magnitude of the capillary detachment force: (i) the thickness of the liquid film between the bubble and the capillary walls, and (ii) the effective angle of the triple phase contact between the particles and the interface. Variations in film thickness were calculated using a two-phase flow model. Film thickness was used to determine the time-variation of the capillary force during transit of the bubble. The curve for particle detachment was predicted from the calculated force. This curve proved to be non-linear and gave in situ information on the effective contact angle developing at the particle–bubble interface during detachment. This approach allowed an accurate determination of the detachment force. This theoretical approach was validated using latex particles 2 μm in diameter.     

Colloidal rings in a liquid mixture

We investigate the self-assembly of colloidal particles on microscopic decane droplets in water and show that, by use of paramagnetic colloids, it is possible to assemble ringlike structures that can be controlled with a magnetic field. Moreover, the use of paramagnetic colloids allows us to determine the attractive forces between the colloids located at the three-phase contact line between decane, water, and air. The attractive force is in the femtonewton range and is attributed to capillary interactions due to interface deformations. When the liquid emulsion dries on a glass slide, we observe solid deposits in the form of microscopic rings of varying diameters.     

Colloidal interactions between asphaltene surfaces in aqueous solutions

Asphaltene at oil/water interfaces plays a dominant role in the recovery of crude oil. In this study, asphaltene monolayer films were deposited on hydrophobic silicon wafers and silica spheres from oil-water interfaces using a Langmuir interfacial trough. The morphology of the deposited asphaltene films was characterized with an atomic force microscope (AFM). The colloidal forces between the prepared asphaltene films in aqueous solutions were measured with AFM to shed light on the stabilization of water or oil droplets coated with asphaltene films. Factors such as solution pH, KCl concentration, calcium addition, and temperature all showed a strong impact on colloidal forces between the prepared asphaltene films. The findings provided a better understanding of asphaltene interfacial films at an oil/water interface in stabilizing bitumen-in-water and water-in-bitumen emulsions.     

胶体颗粒在液-液界面上的吸附行为及界面组装

综述了胶体颗粒在油水界面上的吸附行为及其应用。胶体颗粒在界面上的吸附行为主要受颗粒大小、相互作用力、电性质及润湿性质等因素的影响。本文第一部分主要从作用力出发阐述了胶体颗粒在液-液吸附过程中各种影响因素的理论研究进展;第二部分主要阐述了胶体颗粒在液-液界面上的吸附能够在界面组装、乳液和具有特殊功能的新材料制备等领域中的应用。     

胶体颗粒在液-液界面上的吸附行为及界面组装

综述了胶体颗粒在油水界面上的吸附行为及其应用.胶体颗粒在界面上的吸附行为主要受颗粒大小、相互作用力、电性质及润湿性质等因素的影响.本文第一部分主要从作用力出发阐述了胶体颗粒在液-液吸附过程中各种影响因素的理论研究进展;第二部分主要阐述了胶体颗粒在液-液界面上的吸附能够在界面组装、乳液和具有特殊功能的新材料制备等领域中的应用.     

Formation of mesoscopic silver particles at micro- and nano-liquid/liquid interfaces

Silver particles have been deposited at externally polarised 1,2-dichloroethane (DCE)/water interfaces supported at the tip of micro- and nanopipettes. The electrochemical process involved the reduction of silver ion in the aqueous phase by an organic-phase electron donor (butylferrocene). The silver nucleation and growth process was investigated using potential step chronoamperometry, and the resulting current–time transients were analysed to extract nucleus numbers. At larger pipettes, with diameters of several micrometers, multi-particle nucleation was observed and optical microscopy provided direct evidence for metal electrodeposition at the liquid/liquid interface. For pipettes with radii of 0.5 μm or smaller, the current–time behaviour was consistent with single particle generation. Under some conditions, detachment of the particle from the liquid/liquid interface was inferred from the current–time characteristics, and it is suggested that controlled-detachment from micropipettes could provide a method for the deposition of small metal structures on surfaces.     

Adhesion forces between functionalized latex microspheres and protein-coated surfaces evaluated using colloid probe atomic force microscopy

Proteins are important in bacterial adhesion, but interactions at molecular-scales between proteins and specific functional groups are not well understood. The adhesion forces between four proteins [bovine serum albumin (BSA), protein A, lysozyme, and poly-d-lysine] and COOH, NH2 and OH-functionalized (latex) colloids were examined using colloid probe atomic force microscopy (AFM) as the function of colloid residence time (T) and solution ionic strength (IS). For three of the proteins, OH-functionalized colloids produced higher adhesion forces to proteins (2.6-30.5 nN; IS=1 mM, T=10s) than COOH- and NH2-functionalized colloids (1.6-6.8 nN). However, protein A produced the largest adhesion force (8.1+/-1.0 nN, T=10 s) with the COOH-functionalized colloid, demonstrating the importance of specific and unanticipated protein-functional group interactions. The NH2-functionalized colloid typically produced the lowest adhesion forces with all proteins, likely due to repulsive electrostatic forces and weak bonds for NH2-NH2 interactions. The adhesion force (F) between functionalized colloids and proteins consistently increased with residence time (T), and data was well fitted by F=ATn. The constant value of n=0.21+/-0.07 for all combinations of proteins and functionalized colloids indicated that water exclusion and protein rearrangement were the primary factors affecting adhesion over time. Adhesion forces decreased inversely with IS for all functional groups interacting with surface proteins, consistent with previous findings. These results demonstrate the importance of specific molecular-scale interactions between functional groups and proteins that will help us to better understand factors colloidal adhesion to surfaces.     

Light scattering near and from interfaces using evanescent wave and ellipsometric light scattering

The broad range of interface light scattering investigations in recent years shows the power and the versatility of these techniques to address new and open questions in colloid and interface science and the soft condensed matter field. Structural information for polymers, liquid crystals, or colloids close to planar or spherical colloidal interfaces are either captured with long range light scattering resolution, or in a complementary approach by high resolution ellipsometric techniques. Of special interest is the dynamic behavior close to or in interfaces, since it determines material properties and responses to external fields. Due to the broad dynamical range and the high scattering contrast for visible light, interface light scattering is a key to elucidate soft matter interfacial dynamics. This contribution reviews experimental and related theoretical approaches for interface light scattering and further gives an overview of achievements based on such techniques.     

Characterization of heavy-metal-containing seepage water colloids by flow FFF, ultrafiltration, ELISA and AAS

Heavy-metal-containing humic colloids from seepage water samples of three different municipal waste disposal plants were characterized in terms of molecular weight, hydrodynamic radius and heavy metal content. The size distribution of the colloids was determined with ultrafiltration (UF) and flow field-flow fractionation (flow FFF). The humic colloids in the seepage water samples were characterized using an off-line coupling of flow FFF with an enzyme-linked immunosorbent assay (ELISA) for humic substances. The heavy metals in the different size fractions obtained by UF and flow FFF were determined using atomic absorption spectroscopy (AAS). The colloid size distributions obtained with UF showed a maximum of the distribution in the range 1–10 nm. Seepage water samples with high colloid concentrations had a second maximum in the range 0.1–1 m. The determination of colloid size with flow FFF gave different colloid size distributions for the three waste disposal seepage waters, whereas water from the oldest disposal plant showed the smallest colloid size with a maximum at 0.9 nm and water from the most recent plant showed the largest colloid size with a maximum at 1.3 nm. The determination of particle classes with regard to the chemical composition using a scanning electron microscope with energy dispersive X-ray fluorescence detector (SEM/EDX) showed that the particles can be divided into five classes: silicates, insoluble salts, iron(hydr)oxides, carbonates and organic colloids (humic colloids). Flow FFF/ELISA off-line coupling showed that the most frequently occurring colloids of the seepage waters were humic colloids and investigation of the UF-size-fractions with AAS showed that up to 77% of the total mass of a heavy metal element can be bound to particles, especially to humic colloids. Additionally, the distributions of the heavy metals Fe, Cu and Zn were investigated with flow FFF/AAS off-line coupling. These results also showed that a substantial amount of these heavy metals (up to 46%) was bound to humic colloids.     

Attachment and detachment of particles to and from fluid interfaces

In this topical review, we commemorate some of the outstanding contributions of Prof. Peter Kralchevsky in the field of colloid and interface science. In particular, we focus on his achievements on phenomena involving the attachment and detachment of colloidal particles to and from fluid interfaces, giving a personal perspective on how his work has inspired our own research and the activities of a thriving scientific community. We specifically concentrate our presentation on the issues of emulsion stability via particle adsorption and desorption, particle organization via capillary immersion forces and on the relevance of electrostatic barriers to spontaneous particle adsorption. This review takes the reader through numerous developments, from the early ‘90s to the present day, and reflects on the importance of the legacy of the work of Prof. Kralchevsky for the years to come.     

Analysis of Contact Interactions between a Rough Deformable Colloid and a Smooth Substrate

A model was developed for the effect of van der Waals interactions between a rough, deformable, spherical colloid and a flat, smooth, hard surface in contact. The model demonstrates the significant effect of colloid roughness on removal force. Small changes in colloid roughness produce large changes in the predicted removal force. Several authors attribute discrepancies in the observed interaction force between particles and surfaces to colloid roughness, and our model supports their hypotheses. Experimental data documenting the force required to remove colloids of polystyrene latex from silica substrates in aqueous solution were collected during AFM studies of this system. When colloid roughness exists, as is the case in this work, our model bounds the observed removal force. The predicted range of removal forces is in better quantitative agreement with our removal force data than are forces predicted by classical DLVO theory. Copyright 2000 Academic Press.     

Theoretical consideration on preparing silver particle films by adsorbing nanoparticles from bulk colloids to an air-water interface

In our previous paper, a method for preparing enormous surface-enhanced Raman scattering (SERS) active substrates through the aggregation of silver particles trapped at an air-water interface was reported. Here, further efforts were devoted to investigate the origin of assembling silver particle films by adsorbing nanoparticles from bulk colloids to the air-water interface. It was revealed that it is thermodynamically favorable for a colloidal particle in bulk colloids to adsorb to the air-water interface; however, a finite sorption barrier between it and the nearby particles usually restrains the adsorption process. When an electrolyte such as KCl, which is commonly used as an activating agent for additional SERS enhancement, was added into silver colloids, it largely reduced the sorption barrier. Thus, silver nanoparticles can break through the sorption barrier, pop up, and be trapped at the air-water interface. The trapped silver particles are more inclined to aggregate at the interface than those in bulk colloids due to the increase of van der Waals forces and the reduction of electrostatic forces. The morphology of the as-prepared silver particle films was characterized by scanning electron microscope, and their SERS activity was tested using NaSCN as a probe molecule. The surface enhancement of the silver particle films is about 1-2 orders of magnitude higher compared with that of silver colloids, because most of the silver particles in the films are in the aggregation form that provides enormous SERS enhancement. Furthermore, the stability of such type of films is much better that of colloid solutions.     

Bulk and interfacial behaviour of caseinoglycomacropeptide (GMP)

Caseinoglycomacropeptide (GMP) is a hydrophilic glycopeptide released from milk κ-casein by chymosin hydrolysis during cheese making. GMP is thought to be a potential ingredient for specific dietary applications with several health benefits. In this study GMP was characterized at the air–water interface and its behaviour was related with the self-assembly of GMP in solution as affected by pH. This GMP self-assembly was investigated by dynamic light scattering and the interfacial properties were determined by tensiometry and surface dilatational measurements at pH 4, 5 and 7. At pH 5 GMP exhibited higher surface pressure at equilibrium than at pH 7. At pH 4 the behaviour was more complex due to self-assembly close to GMP pI. Dynamic measurement showed that the adsorption/penetration rate constant (K_ads) is facilitated at higher GMP bulk concentrations, while the rate constant of rearrangement (K_r) decreased at higher GMP concentrations which could be attributed to the existence of a steric restriction due to the higher GMP load at the interface. K_r was higher at pH 5 because of lower electrostatic interactions close to the pI. The viscoelastic properties showed a complex behaviour due to the existence of protein–protein interactions depending on the GMP concentration, on the pH of the bulk and on the rates of diffusion, adsorption and rearrangement of GMP at the air–water interface.     

Controlled electrophoretic patterning of polyaniline from a colloidal suspension

We present a method for controlled deposition of polyaniline from colloidal suspensions. Stable suspensions of polyaniline colloids (approximately 115 nm in diameter) were formed by dispersing polyaniline/formic acid solution into acetonitrile. It was demonstrated that the positively charged polyaniline colloids can be electrophoretically deposited onto various substrate materials such as platinum and ITO, forming continuous ultrathin films. We examined the film morphology, as well as the effects of process parameters, such as deposition time, colloid concentration, and applied voltage, on the deposition efficiency. Furthermore, the efficacy of the technique was illustrated by electrophoretically patterning polyaniline thin films onto selected individual micrometer-scale sensing elements within a microfabricated sensor array, and by further demonstrating its sensitivity to gaseous analytes including water and methanol.