Extraction and sensitive spectrophotometric determination of ytterbium with 2-(3,5-dichloro-2-pyridylazo)-5-dimethylaminophenol

The operating conditions for the absorptiometric determination of Yb(III) with the reagent 2-(3,5-dichloro-2-pyridylazo)-5-dimethylaminophenol (3,5-diClDMPAP) by a liquid—liquid extraction technique are presented. The complex yields a molar absorptivity of 1.54 × 10⁵l.mole⁻¹.cm⁻¹ (λ_max = 588 nm) and an optimum concentration range of 0.025–1.360n mg/l., at pH = 10. The method developed has been applied to the determination of Yb(III) in synthetic and concrete mixtures.     

Spectrophotometric determination of cadmium with 1-(2-pyridylazo)-2-naphthol and non-ionic surfactants Application to acetic acid extracts of ceramic enamels

The Cd-PAN system in the presence of non-ionic surfactants (polyoxyethylene nonylphenols), which dissolve the reagent and complex by formation of micelles, has been studied spectrophotometrically. The optimum conditions for Cd determination are pH 9 (Na₂B₄O₇-HClO₄), 2% of surfactant and measurement at 555 nm. The complex is Cd(PAN)₂ and its conditional formation constant is 3.5 × 10¹¹. The system obeys the Lambert-Beer law, with an error of 0.9% over the Cd concentration range 0.44–1.74 ppm; the molar absorptivity is 4.94 × 10⁴1·mole⁻¹.cm⁻¹ at 555 nm. The relative standard deviation is 0.7% and the limit of detection 0.009 μg/ml. The selectivity with respect to species important in the ceramic industry is adequate for application of the method to determination of Cd in acetic acid extracts of ceramic enamels.     

Flow-injection chemiluminescence determination of chlortetracycline using on-line electrogenerated [Cu(HIO(6))(2)](5-) as the oxidant

A novel chemiluminescence (CL) flow system for the determination of chlortetracycline is described. It is based on the direct CL reaction of chlortetracycline and [Cu(HIO₆)₂]⁵⁻ in KOH medium. The unstable [Cu(HIO₆)₂]⁵⁻ was on-line electrogenerated by constant-current electrolysis. The CL intensity was linear with chlortetracycline concentration in the range of 0.1–100 μg ml⁻¹. The determination limit was 5.3×10⁻⁸ g ml⁻¹. The whole process could be completed in 1 min. The proposed method is suitable for automatic and continuous analysis, and has been applied satisfactorily to analysis of chlortetracycline in biological fluid.     

Selective spectrophotometric determination of palladium(II) with 2(5-nitro-2-pyridylazo)-5-(N-propyl-N-3-sulfopropylamino)phenol(5-NO(2).PAPS) and tartaric acid with 5-NO(2).PAPS-niobium(V) complex

Spectrophotometric determinations of palladium(II) and tartaric acid were respectively investigated by using the color reactions between 2(5-nitro-2-pyridylazo)-5-(N-propyl-N-3-sulfopropylamino)phenol(5-NO₂.PAPS) and palladium(II) in strong acidic media, and between 5-NO₂.PAPS, niobium(V) tartaric acid in weak acidic media. The calibration graphs were linear in the range of 0–25 μg/10 ml palladium(II), with an apparent molecular coefficient () of 6.2×10⁴ l mol⁻¹ cm⁻¹ at 612 nm, and 0–23 μg/10 ml tartaric acid with =1.08×10⁶ l mol⁻¹ cm⁻¹ at 612 nm, respectively. The proposed methods were selective and sensitive in comparison with other chelating pyridylazo dyes–palladium(II) or metavanadic acid–tartaric acid method, and the effect of foreign ions such as copper(II) was negligible for the assay of palladium(II) with 5-NO₂.PAPS.     

One-electron oxidation of mitomycin C and its corresponding peroxyl radicals. A steady-state and pulse radiolysis study

The one-electron oxidation of Mitomycin C (MMC) as well as the formation of the corresponding peroxyl radicals were investigated by both steady-state and pulse radiolysis. The steady-state MMC-radiolysis by OH-attack followed at both absorption bands showed different yields: at 218 nm G_i (-MMC) = 3.0 and at 364 nm G_i (-MMC) = 3.9, indicating the formation of various not yet identified products, among which ammonia was determined, G(NH₃) = 0.81. By means of pulse radiolysis it was established a total κ (OH + MMC) = (5.8 ± 0.2) × 10⁹ dm³ mol⁻¹ s⁻¹. The transient absorption spectrum from the one-electron oxidized MMC showed absorption maxima at 295 nm (ε = 9950 dm³ mol⁻¹ cm^t-1), 410 nm (ε = 1450 dm³ mol⁻¹ cm⁻¹) and 505 nm ( ε = 5420 dm³ mol⁻¹ cm⁻¹). At 280–320 and 505 nm and above they exhibit in the first 150 μs a first order decay, κ₁ = (0.85 ± 0.1) × 10³ s⁻¹, and followed upto ms time range, by a second order decay, 2κ = (1.3 ± 0.3) × 10⁸ dm³ mol^-1 s⁻¹. Around 410 nm the kinetics are rather mixed and could not be resolved.

The steady-state MMC-radiolysis in the presence of oxygen featured a proportionality towards the absorbed dose for both MMC-absorption bands, resulting in a G_i (-MMC) = 1.5. Among several products ammonia-yield was determined G(NH₃) = 0.52. The formation of MMC-peroxyl radicals was studied by pulse radiolysis, likewise in neutral aqueous solution, but saturated with a gas mixture of 80% N₂O and 20% O₂. The maxima of the observed transient spectrum are slightly shifted compared to that of the one-electron oxidized MMC-species, namely: 290 nm (ε = 10100 dm³ mol⁻¹ cm⁻¹), 410 nm (ε = 2900 dm³ mol⁻¹ cm⁻¹) and 520 nm (ε = 5500 dm³ mol⁻¹ cm⁻¹). The O₂-addition to the MMC-one-electron oxidized transients was found to be at 290 to 410 nm gk(MMC·OH + O₂) = 5 × 10⁷ dm³ mol⁻¹ s⁻¹, around 480 nm κ = 1.6 × 10⁸ dm³ mol⁻¹ s⁻¹ and at 510 nm and above, κ = 3 × 10⁸ dm³ mol⁻¹ s⁻¹. The decay kinetics of the MMC-peroxyl radicals were also found to be different at the various absorption bands, but predominantly of first order; at 290–420 nm κ₁ = 1.5 × 10³ s⁻¹ and at 500 nm and above, κ = 7.0 × 10³ s⁻¹.

The presented results are of interest for the radiation behaviour of MMC as well as for its application as an antitumor drug in the combined radiation-chemotherapy of patients.     

Spectrophotometric determination of nitrate and nitrite in soil and water samples with a diazotizable aromatic amine and coupling agent using column preconcentration on naphthalene supported with ion-pair of tetradecyldimethylbenzylammonium and iodide

Composite diazotization-coupling reagents containing sulfanilamide (SAM), sulfapyridine (SP) or sulfathiazole (ST) as the diazotizable aromatic amines and sodium 1-naphthol-4-sulfonate (NS) as the coupling agent using column preconcentration on naphthalene-tetradecyldimethylbenzylammonium(TDBA)-iodide adsorbent have been used for the spectrometric determination of trace nitrate and nitrite in soil and water samples. Nitrite ion reacts with SAM in the pH range 2.0–5.0, SP in the pH range 2.0–2.5 and ST in the pH range 2.0–3.3 in HCl medium to form water-soluble colourless diazonium cations. These cations were coupled with NS in the pH range 9.0–12.0 for the SAM system, 9.6–12.0 for the SP system and 8.5–12.0 for the ST system to be retained on naphthalene-TDBA-I material packed in a column. The solid mass is dissolved from the column with 5 ml of dimethylformamide and the absorbance is measured spectrometerically at 543 nm for SAM-NS, 533 nm for SP-NS and 535 nm for ST-NS. Nitrate is reduced to nitrite by a copper-coated cadmium reductor column and the nitrite is then treated with the diazotization-coupling reagent by column preconcentration. The absorbance due to the sum of nitrate and nitrite is measured and nitrate is determined by difference. The calibration graph was linear over the range 2–40 ng NO₂⁻-N ml⁻¹ and 1.5–30 ng NO₃⁻-N ml⁻¹ in aqueous samples for the SAM and ST systems and 2–48 ng NO₂⁻-N ml⁻¹ and 1.5–36 ng NO₃⁻-N ml⁻¹ in aqueous samples for the SP system, respectively. The sensitivity, accuracy and precision of the systems decreased in the order STSAMSP. The detection limits were 1.4 ng NO₂⁻-N ml⁻¹ and 1.1 ng NO₃⁻-N ml⁻¹ for SAM, 1.6 ng NO₂⁻-N ml⁻¹ and 1.2 ng NO₃⁻-N ml⁻¹ for SP, and 1.0 ng NO₂⁻-N ml⁻¹ and 0.75 ng NO₃⁻-N ml⁻¹ for ST, respectively. The preconcentration factors are 8, 5 and 6 for SAM-NS, SP-NS and ST-NS, respectively. Interferences from various foreign ions have been studied and the methods have been applied to the determination of ng ml⁻¹ levels of nitrite and nitrate in soil and water samples. The mean recovery was 95–102% for all three systems.     

Catalytic determination of cobalt at sub-nanogram levels using the oxidative coupling of 3-methyl-2-benzothiazolinone hydrazone with N-ethyl-N-(2-hydroxy-3-sulfopropyl)-3,5-dimethoxyaniline by manual and flow-injection methods

A catalytic photometric method was developed for the determination of sub-nanogram levels of cobalt. The method is based on the catalytic effect of cobalt(II) on the oxidative coupling of 3-methyl-2-benzothiazolinone hydrazone with N-ethyl-N-(2-hydroxy-3-sulfopropyl)-3,5-dimethoxyaniline (DAOS) to form a colored dye (λ_max=525 nm) in the presence of hydrogen peroxide. In this reaction system, 1,2-dihydroxybenzene-3,5-disulfonate (Tiron) acted as an effective activator for the catalysis of cobalt(II). Variation of reaction time between 5 and 10 min allows the determination range to be extended from 0.01 to 1.0 ng ml⁻¹. The reaction system can also be successfully adapted to flow-injection analysis (FIA). The dynamic range of the proposed flow-injection method was 0.01–1.0 ng ml⁻¹ and detection limit (signal/noise, S/N=3) was 5 pg ml⁻¹ at a sampling rate of 30 h⁻¹. Manual and flow-injection methods were applied to the direct determination of cobalt in pepperbush as a standard material.     

Reactions of oxidizing radicals with 2- and 3-aminopyridines: a pulse radiolysis study

Reactions of OH radicals and some one-electron oxidants with 2-aminopyridine (2-AmPy) and 3-aminopyridine (3-AmPy) were studied in aqueous solutions using pulse radiolysis technique. The OH adduct of 2-AmPy at pH 9 has an absorption maximum at 360 nm along with a weak absorption band in the visible region and was found to be reactive with oxygen. The rate constant for its reaction with O₂ was determined to be 1.0×10⁸ dm³ mol⁻¹ s⁻¹. At pH 4 also, the OH adduct of 2-AmPy has an absorption band at 360 nm. However, there are differences in the absorption at other wavelengths. From the plot of ΔOD vs. pH at 340 nm, the pK_a of the OH adduct was determined to be 6.5. Among the specific oxidants, only SO₄^−√ radicals were able to oxidize 2-AmPy. In the case of 3-aminopyridine (3-AmPy), the transient species formed by OH radical reaction at pH 9 has an absorption maximum at 410 nm with shoulder bands on both the sides. Its absorption spectrum at pH 4 was different indicating the existence of a pK value for the OH adduct. pK_a of 3-AmPy-OH radical adduct species was evaluated to be 5.7. This adduct species was also found to be reactive with oxygen (k=7.6×10⁶ dm³ mol⁻¹ s⁻¹). Specific one-electron oxidants like N₃^√, Br₂^−√ C₂^−√ and SO₄^−√ were able to oxidize 3-AmPy indicating that it is easier to oxidize 3-AmPy as compared to 2-AmPy.     

Extraction-spectrophotometric determination of vanadium with 3,5-dinitrocatechol and Brilliant Green

The formation and extraction of the ion-associates of the vanadium(V)-3,5-dinitrocatechol (DNC) anionic chelate complex with various basic dyes have been studied and a new sensitive extraction—spectrophotometric method for the determination of vanadium based on the system V(V)-DNC-Brilliant Green has been developed. Beer's law is obeyed up to a vanadium concentration of 0.3 μg/ml and the molar absorptivity is 1.7 × 1O⁵ l.mole⁻¹. cm⁻¹ at 630 nm. The molar ratios of the components and the form of the vanadium(V) cation in the extracted compound have been determined, and the formula [VO(OH)(DNC)²⁻₂][BG⁺]₂ is proposed. Titanium, molybdenum, tungsten, EDTA and thiocyanate interfere seriously. The method becomes specific after a preliminary separation of vanadium by its extraction as the BPHA complex from H₂SO₄-HF medium, and is 40 times more sensitive than the spectrophotometric BPHA method. The proposed method has been applied to determination of traces of vanadium (about 10⁻⁵%) in alums.     

Spectrophotometric determination of maneb by ternary complex formation with PAR and CTAB

A rapid, simple, direct, and sensitive method has been developed for the determination of maneb (manganese ethylenebisdithiocarbamate) based on the formation of manganese-4-(2′-pyridylazo) resorcinol complex by a ligand displacement reaction, which is rendered water soluble by a cationic surfactant cetyltrimethylammonium bromide (CTAB) by the formation of an ion association complex. Beer's law is obeyed over the concentration range 0.08–2.4 μg/ml of the final solution at 500 nm in pH range 8–12. The molar absorptivity and Sandell's sensitivity are calculated to be 8.84 × 10⁴ l.mol⁻¹.cm⁻¹ and 0.003 μg/cm², respectively. The developed method has been applied to the determination of maneb in commercial formulations, synthetic mixture, grain samples and vegetables.     

1-(2,3,4-Trihydroxybenzylideneamino)-8-hydroxynaphthalene-3,6-disulfonic acid as reagent for spectrophotometric determination of boron in plants

A highly sensitive and selective method has been developed for spectrophotometric determination of boron in plants, the method based on the color reaction of new reagent 1-(2,3,4-trihydroxybenzylideneamino)-8-hydroxynaphthalene-3,6-disulfonic acid (THBA) with boron (III). In an ammonium acetate solution of pH 8.0, boron(III) reacts with THBA to form a 1:2 yellow complex which has a maximum absorption peak at 430 nm. The reaction can complete within 90 min and the absorbance of the complex remains maximum and almost constant at least for 24 h under a temperature range from 0 to 35 °C. The apparent molar absorptivity and Sandell's sensitivity are 2.95 × 10⁴ l mol⁻¹ cm⁻¹ and 0.00036 ng cm⁻², respectively. The limit of quantification, limit of detection and relative standard deviations were found to be 5.1, 1.5 ng ml⁻¹ and 1.12%, respectively. Under the optimum conditions, the absorbency of the complex (λ_max = 430 nm) increases linearly with concentration up to 0.8 μg ml⁻¹ of boron(III). The influences of foreign ions on the determination of boron were investigated in detail. Most of foreign ions can be tolerated in considerable amounts. Experiments have indicated that THBA as chromogenic reagent for spectrophotometric determination of boron has excellent analytical characteristics. Its sensitivity is more than 4.2-fold that of azomethine-H, and stability is advantage over other derivatives of azomehine-H remarkably. Moreover, the synthesis of THBA and its physicochemical properties of THBA were also investigated in detail. Proposed method has been applied to the determination of boron in plants with satisfactory results.     

Simultaneous potentiometric determination of ClO(3)(-)-ClO(2)(-) and ClO(3)(-)-HClO by flow injection analysis using Fe(III)-Fe(II) potential buffer

A rapid potentiometric flow injection technique for the simultaneous determination of oxychlorine species such as ClO₃⁻–ClO₂⁻ and ClO₃⁻–HClO has been developed, using both a redox electrode detector and a Fe(III)–Fe(II) potential buffer solution containing chloride. The analytical method is based on the detection of a large transient potential change of the redox electrode due to chlorine generated via the reaction of the oxychlorine species with chloride in the potential buffer solution. The sensitivities to HClO and ClO₂⁻ obtained by the transient potential change were enhanced 700–800-fold over that using an equilibrium potential. The detection limit of the present method for HClO and ClO₂⁻ is as low as 5×10⁻⁸ M with use of a 5×10⁻⁴ M Fe(III)–1×10⁻³ M Fe(II) buffer containing 0.3 M KCl and 0.5 M H₂SO₄. On the other hand, sensitivity to ClO₃⁻ was low when a potential buffer solution containing 0.5 M H₂SO₄ was used, but could be increased largely by increasing the acidity of the potential buffer. The detection limit for ClO₃⁻ was 2×10⁻⁶ M with the use of a 5×10⁻⁴ M Fe(III)–1×10⁻³ M Fe(II) buffer containing 0.3 M KCl and 9 M H₂SO₄. By utilizing the difference in reactivity of oxychlorine species with chloride in the potential buffer, a simultaneous determination method for a mixed solution of ClO₃⁻–ClO₂⁻ or ClO₃⁻–HClO was designed to detect, in a timely manner, a transient potential change with the use of two streams of potential buffers which contain different concentrations of sulfuric acid. Analytical concentration ranges of oxychlorine species were 2×10⁻⁵–2×10⁻⁴ M for ClO₃⁻, and 1×10⁻⁶–1×10⁻⁵ M for HClO and ClO₂⁻. The reproducibility of the present method was in the range 1.5–2.3%. The reaction mechanism for the transient potential change used in the present method is also discussed, based on the results of batchwise experiments. The simultaneous determination method was applied to the determination of oxychlorine species in a tap water sample, and was found to provide an analytical result for HClO, which was in good agreement with that obtained by the o-tolidine method and to provide a good recovery for ClO₃⁻ added to the sample.     

Extraction and spectrophotometric determination of cobalt(II) with isonitroso-5-methyl-2-hexanone

A simple and selective method is proposed for the extraction of cobalt(II) for its spectrophotometric determination using (HIMH) as an extractant. Cobalt(II) forms a yellow coloured complex with HIMH which can be extracted into chloroform. The calibration curve is rectilinear in the concentration range 0.1–5.0 μg ml⁻¹ of cobalt(II). The extracted species shows an absorption maximum at 400 nm with molar absorptivity of 1.135×10⁴ l mol⁻¹ cm⁻¹. The method has been applied for the determination of cobalt in synthetic mixtures, pharmaceutical, biological and high speed steel samples.     

Study of the mixed-metal lanthanummagnesium-purpurin complex: spectrophotometric determination of yttrium and lanthanides

Mixtures of La(III) and Mg(II) form with purpurin (P; 1,2,4-trihydroxyanthraquinone) the mixed-metal complex LaMg₂P₅, which is extracted with methyl isobutyl ketone at pH 7.5. The molar absorptivity of the complex is 6.1 × 10⁴ l.mole⁻¹.cm⁻¹ at 570 nm and its conditional extraction constant 5 × 10¹³ l⁴.mole⁻⁴. Similar complexes have been found to be formed with yttrium, cerium, praseodymium, neodymium and samarium. The use of these complexes for the spectrophotometric determination of yttrium and lanthanides up to 15 μg has been investigated.     

Catalytic flow injection determination of vanadium by oxidation of N-(3-sulfopropyl)-3,3',5,5'-tetramethylbenzidine using bromate

A catalytic flow-injection (FI) method was developed for the determination of 10⁻⁹ mol l⁻¹ levels of vanadium(IV, V). The method is based on the catalytic effect of vanadium(V) on oxidation of N-(3-sulfopropyl)-3,3′,5,5′-tetramethylbenzidine (TMBZ·PS) using bromate as oxidant to form a yellow dye (λ_max=460 nm). The use of 5-sulfosalicylic acid (SSA) as an activator enhanced the sensitivity of the method. The calibration graphs with a working range 0.05–8.0 ng ml⁻¹ were obtained for vanadium(V). Vanadium(IV) was also determined, being oxidized by bromate. The detection limit (signal/noise, S/N=3) was 0.01 ng ml⁻¹ (ca. 2×10⁻¹⁰ mol l⁻¹) vanadium. The relative standard deviations (R.S.D.) for 15 determinations of 0.5 ng ml⁻¹ vanadium, and for ten determinations of 0.1 and 1.0 ng ml⁻¹ vanadium were 0.41, 2.6 and 0.25%, respectively, with a sampling rate of 15 samples h⁻¹. The proposed method was successfully applied to the determination of vanadium in natural waters.     

Spectrophotometric method for determination of vanadium and its application to industrial, environmental, biological and soil samples

The very sensitive, fairly selective direct spectrophotometric method for the determination of trace amount of vanadium (V) with 1,5-diphenylcarbohydrazide (1,5-diphenylcarbazide) has been developed. 1,5-diphenylcarbohydrazide (DPCH) reacts in slightly acidic (0.0001–0.001 M H₂SO₄ or pH 4.0–5.5) 50% acetonic media with vanadium (V) to give a red–violet chelate which has an absorption maximum at 531 nm. The average molar absorption coefficient and Sandell’s sensitivity were found to be 4.23×10⁴ l mol⁻¹ cm⁻¹ and 10 ng cm⁻² of V^v, respectively. Linear calibration graph were obtained for 0.1–30 μg ml⁻¹ of V^v: the stoichiometric composition of the chelate is 1:3 (V: DPCH). The reaction is instantaneous and absorbance remain stable for 48 h. The interference from over 50 cations, anions and complexing agents has been studied at 1 μg ml⁻¹ of V^v. The method was successfully used in the determination of vanadium in several standard reference materials (alloys and steels), environmental waters (potable and polluted), biological samples (human blood and urine), soil samples, solution containing both vanadium (V) and vanadium (IV) and complex synthetic mixtures. The method has high precision and accuracy (s=±0.01 for 0.5 μg ml⁻¹).     

Pyrocatechol Violet immobilized Amberlite XAD-2: synthesis and metal-ion uptake properties suitable for analytical applications

Amberlite XAD-2 has been functionalized by coupling it, through the ---N=N--- group, with Pyrocatechol Violet (PV), and the resulting resin has been characterized by elemental analysis, thermogravimetric analysis (TGA) and IR spectra. The resin has been used for preconcentrating Zn(II), Cd(II), Pb(II) and Ni(II) ions prior to their determination by flame atomic absorption spectrometry. The optimum pH values for quantitative sorption are 5, 5–7, 4, and 3 for Zn, Cd, Pb and Ni, respectively. The four metals can be desorbed (recovery ˜98%) with 4 M HNO₃; also, 4 M HCl is equally suitable except for Zn. The sorption capacity of the resin is 1410, 1270, 620 and 1360 μg g⁻¹ resin for Zn, Cd, Ni and Pb, respectively. The effect of F⁻, Cl⁻, NO₃⁻, SO₄²⁻ and PO₄³⁻ on the sorption of these four metal ions has been investigated. They are tolerable in the range 0.01–0.20 M, for Pb. In the sorption of Zn(II) and Ni(II), the tolerance limits of all these ions are upto 0.01 M, whereas for Cd(II), F⁻, NO₃⁻, and PO₄³⁻ have been found to be tolerable upto 0.50, 0.10 and 0.10 M, respectively. The preconcentration factors are 60, 50, 23 and 18 for Zn, Cd, Pb and Ni, respectively. Simultaneous collection and determination of the four metals are possible. Cations commonly present in drinking water do not affect the sorption of either metal ion if present at a concentration level similar to that of water. The method has been applied to determine Zn, Ni and Pb content of well-water samples (RSD ≤9%).     

Redox reactions of 2-hydroxy-3-methoxybenzaldehyde (o-vanillin) in aqueous solution

Pulse radiolysis technique has been employed to study the reactions of oxidizing (^√OH, N₃^√) and reducing radicals (e⁻_aq, CO₂^√−, acetone ketyl radical) with 2-hydroxy-3-methoxybenzaldehyde (o-vanillin) at different pH. Hydroxyl radicals react mostly by addition reaction forming radical adducts (λ_max=420 nm) and the oxidation is only a minor process even in the alkaline region. The reaction with azide radicals produced phenoxyl radicals (λ_max=340 nm), which are formed on fast deprotonation of solute radical cation. Using PMZ^√+/PMZ and ABTS^√−/ABTS²⁻ as the reference couple, different methods are employed to determine the one-electron reduction potential of o-vanillin and the average value is estimated to be 1.076±0.004 V vs. NHE at pH 6. The phenoxyl radicals of o-vanillin were able to oxidize ABTS²⁻ quantitatively. The e_aq⁻ is observed to react with o-vanillin with rate constant value of 2×10¹⁰ dm³ mol⁻¹ s⁻¹. CO₂^√− and acetone ketyl radical are also observed to react with o-vanillin by electron transfer mechanism and showed the formation of transient absorption bands with λ_max at 350 and 390 nm at pH 4.5 and 9.7, respectively. The pK_a of the one-electron reduced species was determined to be 8.1. The results indicate that the aldehydic group is the most preferred site for electron addition.     

Second derivative spectrophotometric method for simultaneous determination of cobalt, nickel and iron using 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol

A simple, sensitive and rapid derivative spectrophotometric method using 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP) has been developed for simultaneous determination of Co(II), Ni(II) and Fe(II) which have very similar chemical behavior and appear together in many real samples. The complexes of all these metal ions with 5-Br-PADAP were formed immediately at pH 7.0 ammonium acetate buffered solution and were stable for at least 24 h. Second derivative spectra were selected for evaluation, because working wavelength determination was more precise and spectral overlap was less than in the ordinary and first derivative spectra. Three wavelengths at which the complexes exhibit extremum ²D values for Co(II), Ni(II) and Fe(II) were selected as analytical wavelengths, i.e., 640, 600 and 740 nm, respectively. Calibration curves drawn with zero-to-peak values at mentioned wavelengths were linear between 80 and 2000 ng ml⁻¹ for each metal ion. Concentrations of Co(II) and Ni(II) were calculated from the total ²D values and the sum of the linear equations for these three cations at 640 and 600 nm, after Fe(II) assay by making use of the ²D value at 740 nm. Limits of detection (LOD) for Co(II), Ni(II) and Fe(II) were 2.7, 13.9 and 3.0 ng ml⁻¹, respectively. The method has been applied to tool steel and heater resistance wire samples successfully.     

TEMPO-initiated oxidation of 2-aminophenol to 2-aminophenoxazin-3-one

The oxidation reaction of 2-aminophenol (OAP) to 2-aminophenoxazin-3-one (APX) initiated by 2,2,6,6-tetramethyl-1-piperidinyloxyl (TEMPO) has been investigated in methanol at ambient temperature. The oxidation of OAP was followed by electronic spectroscopy and the rate constants were determined according to the rate law −d[OAP]/dt=k_obs[OAP][TEMPO]. The rate constant, activation enthalpy and entropy at 298 K are as follows: k_obs (dm³ mol⁻¹ s⁻¹)=(1.49±0.02)×10⁻⁴, E_a=18±5 kJ mol⁻¹, ΔH^‡=15±4 kJ mol⁻¹, ΔS^‡=−82±17 J mol⁻¹ K⁻¹. The results of oxidation of OAP show that the formation of 2-aminophenoxyl radical is the key step in the activation process of the substrate.