A widely varying range of products in reactions of C6F5BrF2, C6F5IF2, and C6F5IF4 with Lewis acids of different strength

The relative fluoride donor ability: C₆F₅BrF₂ > C₆F₅IF₂ > C₆F₅IF₄ was outlined from reactions with Lewis acids of graduated strength in different solvents. Fluoride abstraction from C₆F₅HalF₂ with BF₃·NCCH₃ in acetonitrile (donor solvent) led to [C₆F₅HalF·(NCCH₃)_n][BF₄]. The attempted generation of [C₆F₅BrF]⁺ from C₆F₅BrF₂ and anhydrous HF or BF₃ in weakly coordinating SO₂ClF gave C₆F₅Br besides bromoperfluorocycloalkenes C₆BrF₇ and 1-BrC₆F₉. In reactions of C₆F₅IF₂ with SbF₅ in SO₂ClF the primary observed intermediate (¹⁹F NMR, below 0 °C) was the 4-iodo-1,1,2,3,5,6-hexafluorobenzenium cation, which converted into C₆F₅I and 1-IC₆F₉ at 20 °C. The reaction of C₆F₅IF₄ with SbF₅ in SO₂ClF below −20 °C gave the cation [C₆F₅IF₃]⁺ which decomposed at 20 °C to C₆F₅I, 1-iodoperfluorocyclohexene, and iodoperfluorocyclohexane. Principally, the related perfluoroalkyl compound C₆F₁₃IF₄ showed a different type of products in the fast reaction with AsF₅ in CCl₃F (−60 °C) which resulted in C₆F₁₄. Intermediate and final products of C₆F₅HalF_n−1 (n = 3, 5) with Lewis acids were characterized by NMR in solution. Stable solid products were isolated and analytically characterized.     

Ring transformation of cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium ion to the corresponding pyrrole derivatives via troponeimine intermediates: photo-induced autorecycling oxidizing reactions of some amines

Ring transformation of 7,9-dimethylcyclohepta[b]pyrimido[5,4-d]furan- 8(7H),10(9H)-dionylium tetrafluoroborate 4⁺·BF₄⁻ to 7,9-dimethylcyclohepta[b]pyrimido[5,4-d]pyrrrole-8(7H),10(9H)-dionylium tetrafluoroborate 6a-d⁺·BF₄⁻ consists of the reaction of 4⁺·BF₄⁻ with amines and subsequent exchange of the counter-ion using aq. HBF₄. Reactions of 4⁺·BF₄⁻ with aniline and 4-substituted anilines afforded the corresponding pyrrole derivatives 6a-c⁺·BF₄⁻ directly in good yields. On the other hand, reaction of 4⁺·BF₄⁻ with benzylamine gave the troponeimine intermediate 9, which was not converted to 6d⁺·BF₄⁻ and reverted to 4⁺·BF₄⁻ by adding HBF₄; however, it was converted to 6d⁺·BF₄⁻ upon treatment with (COCl)₂ or SOCl₂, followed by exchange of the counter-ion. In a search for the characteristics of 9, inspection and comparison of the X-ray crystal analyses, NMR and UV-vis spectra, and CV measurement of 9 and N,N-disubstituted troponeimine derivatives 12 were carried out to suggest the remarkable structure of 12 having ionic C-O bonding between the imine-carbon atom and the oxygen atom of the barbituric acid moiety in the solid state. Thus, characteristics of 9 were ascribed to the sterically hindered and favorable conformation of N-protonated troponeimine intermediates. Furthermore, novel photo-induced oxidation reactions of a series of 4⁺·BF₄⁻, 5⁺·BF₄⁻, and 6a,e⁺·BF₄⁻ towards some amines under aerobic conditions were carried out to give the corresponding imines in 455-8362% yields [based on compounds 4⁺, 5⁺, and 6a,e⁺], suggesting the oxidation reaction occurs in an autorecycling process. Mechanistic aspects of the amine-oxidation reaction are also postulated.     

A molecule based on polyoxometalate acid and crown ether: synthesis and characterization of [(H3O)(C20H24O6)]2[HPMo12O40]·C20H24O6·3MeCN·H2O (C20H24O6=dibenzo-18-crown-6)

The new molecule based on 12-molybdophosphate acid and dibenzo-18-crown-6, [(H₃O)(C₂₀H₂₄O₆)]₂[HPMo₁₂O₄₀]·C₂₀H₂₄O₆·3MeCN·H₂O 1, was synthesized in acetonitrile and characterized by elemental analyses, IR, ¹H NMR, electrospray mass spectra and single crystal X-ray diffraction, indicating that it contains [(H₃O)(dibenzo-18-crown-6)]⁺ cations, where oxonium ions are out of the planes defined by crown ether oxygen atoms, and disordered PMo₁₂O₄₀³⁻ anions with α-Keggin structure where the crystal has high lattice energy so that it is difficult to dissolve it. The crystallographic disorder averages Mo-Mo distances and Mo-O_b/c-Mo angles between the M₃ triplets and within the M₃ triplet. The interactions between crown ether molecules and oxonium ions are hydrogen-bonding with the O(crown ether)-OH₃⁺ distances of 2.510(10)-2.783(7) Å. The interactions between [(H₃O)(dibenzo-18-crown-6)]⁺ cations and PMo₁₂O₄₀³⁻ anions are dominantly electrostatic. The electrical conductivity is <10⁻⁷ S.cm⁻¹.     

Nickel(IV) dithiocarbamato complexes of the [Ni(ndtc)3]X type: X-ray structure of [Ni(hmidtc)3][FeCl4]

A series of fourteen octahedral nickel(IV) dithiocarbamato complexes of the general formula [Ni(ndtc)₃]X·yH₂O {ndtc stands for the appropriate dithiocarbamate anion, X stands for ClO₄⁻ (1-8; y = 0) or [FeCl₄]⁻ (9-14; y = 0 for 9-12, 1 for 13 and 0.5 for 14} was prepared by the oxidation of the corresponding nickel(II) complexes, i.e. [Ni(ndtc)₂], with NOClO₄ or FeCl₃. The complexes, involving a high-valent Ni^IVS₆ core, were characterized by elemental analysis (C, H, N, Cl and Ni), UV-Vis and FTIR spectroscopy, thermal analysis and magnetochemical and conductivity measurements. The X-ray structure of [Ni(hmidtc)₃][FeCl₄] (9) was determined {it consists of covalently discrete complex [Ni(hmidtc)₃]⁺ cations and [FeCl₄]⁻ anions} and this revealed slightly distorted octahedral and tetrahedral geometries within the complex cations, and anions, respectively. The Ni(IV) atom is six-coordinated by three bidentate S-donor hexamethyleneiminedithiocarbamate anions (hmidtc), with Ni-S bond lengths ranging from 2.2597(5) to 2.2652(5) Å, while the shortest Ni···Cl and Ni···Fe distances equal 4.1043(12), and 6.2862(6) Å, respectively. Moreover, the formal oxidation state of iron in [FeCl₄]⁻ as well as the coordination geometry in its vicinity was also proved by ⁵⁷Fe Mössbauer spectroscopy in the case of 9.     

Synthesis, properties, and oxidizing function of 6-substituted 7,9-dimethylcyclohepta[b]pyrimido[5,4-d]pyrrole-8(7H),10(9H)-dionylium tetrafluoroborates

Uracil-annulated heteroazulenes, 6-substituted 7,9-dimethylcyclohepta[b]pyrimido[5,4-d]pyrrole-8(7H),10(9H)-dionylium tetrafluoroborates 7a,b·BF₄⁻, which are the isoelectronic compounds of 5-dezazaflavin, were synthesized. X-Ray crystal analysis and MO calculations were carried out to clarify the structural characteristics of 7a,b·BF₄⁻. The stability of cations 7a,b is expressed by the pK_R+ values which were determined spectrophotometrically to be 10.9 and 11.2, respectively. The electrochemical reduction of 7a,b exhibited high reduction potentials at −0.84 and −0.87 (V vs Ag/AgNO₃) upon cyclic voltammetry (CV). A good linear correlation between the pK_R+ values and reduction potentials (E1_red) of 7a,b·BF₄⁻ and reference compounds 4·BF₄⁻ and 5·BF₄⁻ was obtained. In a search of the reactivity, reactions of 7a,b·BF₄⁻ with some nucleophiles, hydride and diethylamine, were carried out to clarify that the introduction of nucleophiles to give regio-isomers is dependent on the nucleophile. The photo-induced oxidation reactions of 7a,b·BF₄⁻ toward some alcohols under aerobic conditions were carried out to give the corresponding carbonyl compounds in more than 100% yield [based on compounds 7a,b·BF₄⁻], suggesting the oxidizing function of 7a,b·BF₄⁻ toward alcohols in the autorecycling process.     

Synthesis and thermochemistry of SrB2O4·4H2O and SrB2O4

Two pure strontium borates SrB₂O₄·4H₂O and SrB₂O₄ have been synthesized and characterized by means of chemical analysis and XRD, FT-IR, DTA-TG techniques. The molar enthalpies of solution of SrB₂O₄·4H₂O and SrB₂O₄ in 1 mol dm⁻³ HCl(aq) were measured to be −(9.92 ± 0.20) kJ mol⁻¹ and −(81.27 ± 0.30) kJ mol⁻¹, respectively. The molar enthalpy of solution of Sr(OH)₂·8H₂O in (HCl + H₃BO₃)(aq) were determined to be −(51.69 ± 0.15) kJ mol⁻¹. With the use of the enthalpy of solution of H₃BO₃ in 1 mol dm⁻³ HCl(aq), and the standard molar enthalpies of formation for Sr(OH)₂·8H₂O(s), H₃BO₃(s), and H₂O(l), the standard molar enthalpies of formation of −(3253.1 ± 1.7) kJ mol⁻¹ for SrB₂O₄·4H₂O, and of −(2038.4 ± 1.7) kJ mol⁻¹ for SrB₂O₄ were obtained.     

Structural and mechanistic studies on ion insertion into the molecular box {[CpCo(CN)3]4[Cp*Ru]4}

The molecular box [CpCo(CN)₃]₄[Cp*Ru]₄ (Co₄Ru₄) reacts readily with a variety of monocations to form M⊂Co₄Ru₄⁺ (M=K⁺, Cs⁺, Rb⁺). Ion competition experiments, monitored by ESI-MS, show that the molecular box binds the smaller K⁺ more rapidly than Cs⁺, but that thermodynamically Co₄Ru₄ prefers the larger ion. The rates of ion-insertion for K⁺ and Cs⁺ into Co₄Ru₄ were found to qualitatively follow second order kinetics with K⁺, 300 M⁻¹ s⁻¹ and Cs⁺, 36 M⁻¹ s⁻¹. The ratio k_K/k_Cs qualitatively matched the ESI-MS results from ion competition experiments. The rates of ion-insertion into Co₄Ru₄ were found to depend on the counter anions. In particular, RbBF₄ reacted with Co₄Ru₄ more slowly than did RbOTf. The slower rates allowed us to establish second order kinetics. ¹H NMR studies reveal that the Cp signal for Co₄Ru₄ is very sensitive to the presence of entering ions, e.g., Rb⁺, whereas the corresponding Cp signal for Rb⊂Co₄Ru₄⁺ was insensitive to the presence of Rb⁺. The molecular structures of [Co₄Ru₄] · 6MeCN, [K⊂Co₄Ru₄]BF₄ · 7MeCN, [Cs⊂Co₄Ru₄]BF₄ · 6MeCN and [Tl⊂Co₄Ru₄]BF₄ · 6MeCN, determined by X-ray diffraction, showed that although the compounds crystallized in the same space group I23, a correlation exists between the Ru-N/Co-C bond distances and the size of the interstitial ion.     

Basic study on the determination of total boron by conversion to tetrafluoroborate ion (BF4) followed by ion chromatography

The basic study on the determination of tetrafluoroborate ion (BF₄⁻) by ion chromatography, and total boron by conversion of boric acid to BF₄⁻ followed by ion chromatography of BF₄⁻ has been carried out. The results of thermodynamic calculations for the system of boric acid (H₃BO₃)-F⁻-H⁺ showed that the mole fraction of BF₄⁻ was higher than 99% at pH lower than 3.5 and 4.5 when the total free fluoride concentration (2[H₂F₂] + 2[HF₂⁻] + [HF] + [F⁻]) was as high as 0.1 and 1.0 M, respectively. The fraction of BF₄⁻ increased with increasing total free fluoride concentration. BF₄⁻ fraction values were higher than 99% at pH 0.75 and at total free fluoride concentration of 0.05 M or higher. BF₄⁻ was hardly formed at pH > 7 even when the total free fluoride concentration was as high as 1.0 M. According to the experimental results, the fraction of BF₄⁻ at pH 0.7-0.8 was 51.2, 95.6 and 96.7% when the total fluoride concentration (2[H₂F₂] + 2[HF₂⁻] + [HF] + [F⁻] + 3[BF₃OH⁻] + 4[BF₄⁻]) was 0.2, 1.0 and 3.3 M, respectively. The formation reaction of BF₄⁻ from boric acid reached an equilibrium state within 20 min regardless of reaction temperature, in the range of 20-50 °C, when the total boron and total fluoride concentrations were 66.7 mM and 1.0 M, respectively. Although BF₄⁻ was formed only under acidic conditions, BF₄⁻, once formed, was very stable under alkaline conditions at least for several hours. We have concluded that BF₄⁻ could be analyzed by ion chromatography using sodium hydroxide solution as an eluent because BF₄⁻ was stable under chromatographic conditions. BF₄⁻ solution prepared from boric acid could be used as a standard solution in the ion chromatographic analysis of BF₄⁻ instead of the sodium tetrafluoroborate (NaBF₄) reagent available commercially, if a discrepancy of about 4-5% was allowed.     

Spectroscopic and structural studies of the 2D Mn(II) coordination polymer from a bridging Noxa, Npy bidentate ligand; tetra-n-butylammonium[5-(3-pyridyl)-1,3,4-oxadiazole-2-thiolate]

A coordination polymer {[Mn(3-pyt)₂(H₂O)₂][N(n-Bu)₄]⁺[3-pyt]⁻}_n (3) has been synthesized from the reaction of tetra-n-butylammonium[5-(3-pyridyl)-1,3,4-oxadiazole-2-thiolate] {[N(n-Bu)₄]⁺[3-pyt]⁻} and Mn(OAc)₂ · 4H₂O. The ligand and the Mn(II) complex 3 have been characterized by elemental analyses, IR, ¹H and ¹³C NMR spectroscopy, in addition 3 has also been studied crystallographically. The single crystal X-ray structure of the 3 shows that the ligand is bonded to Mn(II) via its pyridyl and oxadiazole nitrogen atoms. This bonding pattern connects the Mn(II) centres to afford an uniform two dimensional coordination frame work where the [Mn(3-pyt)₂(H₂O)₂]_n molecules are stacked in a parallel layers. The overall arrangement of molecules in crystal lattice results in open channels in which the enclosed tetra-n-butylammonium cations are stabilized by anionic oxadiazole molecules through N⁺···S⁻ ionic interactions.     

Thermochemistry of NaRb[B4O5(OH)4]·4H2O

The enthalpies of solution of NaRb[B₄O₅(OH)₄]·4H₂O in approximately 1 mol dm⁻³ aqueous hydrochloric acid and of RbCl in aqueous (hydrochloric acid + boric acid + sodium chloride) were determined. From these results and the enthalpy of solution of H₃BO₃ in approximately 1 mol dm⁻³ HCl(aq) and of sodium chloride in aqueous (hydrochloric acid + boric acid), the standard molar enthalpy of formation of −(5128.02 ± 1.94) kJ mol⁻¹ for NaRb[B₄O₅(OH)₄]·4H₂O was obtained from the standard molar enthalpies of formation of NaCl(s), RbCl(s), H₃BO₃(s) and H₂O(l). The standard molar entropy of formation of NaRb[B₄O₅(OH)₄]·4H₂O was calculated from the Gibbs free energy of formation of NaRb[B₄O₅(OH)₄]·4H₂O computed from a group contribution method.     

Heavy doping of H ion in 12CaO·7Al2O3

12CaO·7Al₂O₃ (C12A7, mayenite), which has a nanoscale porous structure that can accommodate extraframework species such as hydride (H⁻), oxide (O²⁻), hydroxide (OH⁻) ions, and electrons, has been doped with H⁻ ions to investigate its effects as dominant extraframework species. Chemical doping with CaH₂ enables the concentration of H⁻ ions to reach almost the theoretical maximum. The concentration of H⁻ ions is characterized by optical absorption intensity ascribed to photoionization of H⁻ ions, and ¹H magic angle spinning nuclear magnetic resonance (MAS-NMR) spectroscopy. Persistent electron generation, which is accompanied by the formation of an F⁺ absorption band and electrical conductivity, by irradiation with ultraviolet light at room temperature increases as the H⁻ ion doping increases until it reaches half the theoretical maximum and then decreases as the H⁻ ion concentration increases further. This dependence indicates that both H⁻ and O²⁻ ions are necessary for the generation of persistent electrons.     

Phase transitions and molecular motions in [Cd(H2O)6](BF4)2 studied by DSC, H and F NMR and FT-MIR

Two solid phase transitions of [Cd(H₂O)₆](BF₄)₂ occurring on heating at T_C2=183.3 K and T_C1=325.3 K, with 2 K and 5 K hysteresis, respectively, were detected by differential scanning calorimetry (DSC). High value of entropy changes indicated large orientational disorder of the high temperature and intermediate phase. Nuclear magnetic resonance (¹H NMR and ¹⁹F NMR) relaxation measurements revealed that the phase transitions at T_C1 and T_C2 were associated with a drastic and small change, respectively, of the both spin-lattice relaxation times: T₁(¹H) and T₁(¹⁹F). These relaxation processes were connected with the “tumbling” motions of the [Cd(H₂O)₆]²⁺, reorientational motions of the H₂O ligands, and with the iso- and anisotropic reorientation of the BF₄⁻ anions. The cross-relaxation effect was observed in phase III. The line width and the second moment of the ¹H and ¹⁹F NMR line measurements revealed that the H₂O reorientate in all three phases of the title compound. On heating the onset of the reorientation of 3 H₂O in the [Cd(H₂O)₆]⁺², around the three-fold symmetry axis of these octahedron, causes the isotropic reorientation of the whole cation. The BF₄⁻ reorientate isotropically in the phases I and II, but in the phase III they perform slow reorientation only about three- or two-fold axes. A small distortion in the structure of BF₄⁻ as well as of [Cd(H₂O)₆]²⁺ is postulated. The temperature dependence of the bandwidth of the O-H stretching mode measured by Fourier transform middle infrared spectroscopy (FT-MIR) indicated that the activation energy for the reorientation of the H₂O did not change much at the T_C2 phase transition.     

The nature of interactions between N-butylpyridinium tetrafluoroborate and thiophenic compounds: A theoretical investigation

In an effort to understand the nature of the interactions between pyridinium-based ionic liquids and thiophenic compounds, the electronic and topological properties of the interactions between N-butylpyridinium tetrafluoroborate ([BPY]⁺[BF₄]⁻) and thiophene (TS), benzothiophene (BT), dibenzothiophene (DBT) have been investigated by density functional theory. The most stable structure of the [BPY]⁺[BF₄]⁻ ion-pair indicated that hydrogen bonding interactions between fluorine atoms on [BF₄]⁻ anions and C2–H2 on the pyridinium ring play an important role in the formation of the ion-pair. The NBO and AIM analyses indicate the occurrence of π–π stacking interactions. The electron density at bond critical points and Wiberg bond indices are correlated with the interacting distances of H···F interactions, so electron density and Wiberg bond index can demonstrate the interacting strength of H···F hydrogen bonds. The interaction energies suggest that DBT adsorbs prior to the other compounds on N-butylpyridinium tetrafluoroborate ionic liquid.     

Structural and kinetic effects of chloride ions in the palladium-catalyzed allylic substitutions

Addition of ligands to [Pd(η³-RCHCHCH₂)(μ-Cl)]₂ or chloride ions to cationic [(η³-RCHCHCH₂)PdL₂]⁺BF₄⁻ induces the formation of neutral complexes η¹-RCHCHCH₂PdClL₂ (R=H with L=(4-ClC₆H₄)₃P, (4-CH₃C₆H₄)₃P, (4-CF₃C₆H₄)₃P or L₂=1,2-bis(diphenylphosphino)butane (dppb), 1,1′-bis(diphenylphosphino)ferrocene (dppf); R=Ph with L=(4-ClC₆H₄)₃P), instead of the expected cationic complexes [(η³-RCHCHCH₂)PdL₂]⁺Cl⁻. In the presence of chloride ions, the reaction of morpholine with the cationic complexes [(η³-allyl)Pd(PAr₃)₂]⁺BF₄⁻ (Ar=4-ClC₆H₄, 4-CH₃C₆H₄) goes slower and involves both cationic [(η³-allyl)Pd(PAr₃)₂]⁺ and neutral η¹-allyl-PdCl(PAr₃)₂ complexes as reactive species in equilibrium with Cl⁻. The cationic complex is more reactive than the neutral one. However, their relative contribution in the reaction strongly depends on the chloride concentration, which controls their relative concentration. The neutral η¹-allyl-PdCl(PAr₃)₂ may become the major reactive species at high chloride concentration. Consequently, [Pd(η³-allyl)(μ-Cl)]₂ associated with ligands or cationic [(η³-allyl)PdL₂]⁺BF₄⁻, used indifferently as precursors in palladium-catalyzed allylic substitutions, are not equivalent. In both situations, the mechanism of the Pd-catalyzed allylic substitution depends on the concentration of the chloride ions, delivered by the precursor or purposely added, that determines which species, [(η³-allyl)PdL₂]⁺ or/and η¹-allyl-PdClL₂ are involved in the nucleophilic attack with consequences on the rate of the reaction and probably on its regioselectivity. Consequently, the chloride ions of the catalytic precursors [Pd(η³-allyl)(μ-Cl)]₂ must not be considered as ‘innocent’ ligands.     

Hydrogen bonded H3O, H2O, HF, F in fluoride metalates (Al, Cr, Fe, Zr, Ta) templated with tren (tris-(2-aminoethyl)amine)

The environment of H₃O⁺, H₂O, HF and F⁻ species (non-bonded to metals) is considered in fluoride metalates which crystallise from the (Al(OH)₃, Cr(OH)₃, FeF₃, ZrF₄, Ta₂O₅)-tren-HF_aq·-ethanol systems (microwave heating at 190 °C during 1 h). The presence of (H₃O)(H₂O)₆⁺ clusters or H₃O⁺ cations, of isolated or associated H₂O molecules, of (HF₂)⁻ and F⁻ anions is evidenced. The thermal stability of the solids depends strongly on the nature of the hydrogen-bonded species associated with the preceding cations or anions and on the formation of water ribbons or layers.     

Novel photo-induced oxidative cyclization of 1,3-dimethyl-5-(1-arylmethylidene)pyrimidine-2,4,6(1,3,5H)-triones: synthesis and properties of areno[5,6]pyrano[2,3-d]pyrimidine-2,4(1,3H)-dionylium ions and their photo-induced autorecycling oxidizing reaction toward some amines

Novel photo-induced oxidative cyclization was accomplished to synthesize areno[b]pyrimido[5,4-e]pyran-2,4(1,3H)-dionylium ions 13a-c⁺·ClO₄⁻. Furthermore, 13a-c⁺·BF₄⁻ and their phenyl-substituted derivatives 19a,b⁺·BF₄⁻ were alternatively synthesized by the reaction of salicylaldehyde and its naphthyl derivatives with barbituric acids and subsequent treatment with aq. HBF₄. Structural characteristics of 13a-c⁺ and 19a,b⁺ were clarified on inspection of the UV-vis and NMR spectral data as well as X-ray crystal analyses. The electrochemical properties were studied by the CV measurement. In a search for reactivity, reactions of 13a-c⁺·BF₄⁻ with some nucleophiles, hydride, benzylamine, and H₂O, were also carried out. The photo-induced autorecycling oxidation reactions of 13a-c⁺·BF₄⁻ toward some amines under aerobic conditions were carried out to give the corresponding imines (isolated by converting to the corresponding 2,4-dinitrophenylhydrazones) in 643-3600% yield (recycling number of 13a-c⁺·BF₄⁻: 6.4-36.0).     

Synthesis,crystal structure and magnetic properties of the helical oxalate-bridged copper(II) chain {[(CH3)4N]2[Cu(C2O4)2] · H2O}n

The preparation, crystal structure and magnetic properties of a new oxalate-containing copper(II) chain of formula {[(CH₃)₄N]₂[Cu(C₂O₄)₂] · H₂O}_n (1) [(CH₃)₄N⁺ = tetramethylammonium cation] are reported. The structure of 1 consists of anionic oxalate-bridged copper(II) chains, tetramethylammoniun cations and crystallization water molecules. Each copper(II) ion in 1 is surrounded by three oxalate ligands, one being bidentate and the other two exhibiting bis-bidenate coordination modes. Although all the tris-chelated copper(II) units from a given chain exhibit the same helicity, adjacent chains have opposite helicities and then an achiral structure results. Variable-temperature magnetic susceptibility measurements of 1 show the occurrence of a weak ferromagnetic interaction through the oxalate bridge [J = +1.14(1) cm⁻¹, the Hamiltonian being defined as H = –J ∑_nmS_i · S_j]. This value is analyzed and discussed in the light of available magneto-structural data for oxalate-bridged copper(II) complexes with the same out-of-plane exchange pathway.     

Synthesis and properties of novel 5-(cyclohepta-2′,4′,6′-trienylidene)pyrimidine-2(1H),4(3H),6(5H)-triones: methodology for synthesizing cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborates

Novel condensation reaction of tropone with N-substituted and N,N′-disubstitued barbituric acids in Ac₂O afforded 5-(cyclohepta-2′,4′,6′-trienylidene)pyrimidine-2(1H),4(3H),6(5H)-trione derivatives (8a-f) in moderate to good yields. The ¹³C NMR spectral study of 8a-f revealed that the contribution of zwitterionic resonance structures is less important as compared with that of 8,8-dicyanoheptafulvene. The rotational barriers (ΔG^‡) around the exocyclic double bond of mono-substituted derivatives 8a-c were obtained to be 14.51-15.03 kcal mol⁻¹ by the variable temperature ¹H NMR measurements. The electrochemical properties of 8a-f were also studied by CV measurement. Upon treatment with DDQ, 8a-c underwent oxidative cyclization to give two products, 7 and 9-substituted cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborates (11a-c·BF₄⁻ and 12a-c·BF₄⁻) in various ratios, while that of disubstituted derivatives 8d-f afforded 7,9-disubstituted cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborate (11d-f·BF₄⁻) in good yields. Similarly, preparation of known 5-(1′-oxocycloheptatrien-2′-yl)-pyrimidine-2(1H),4(3H),6(5H)-trione derivatives (14a-d) and novel derivatives 14e,f was carried out. Treatment of 14a-c with aq. HBF₄/Ac₂O afforded two kinds of novel products 11a-c·BF₄⁻ and 12a,c·BF₄⁻ in various ratios, respectively, while that of 14d-f afforded 11d-f. The product ratios of 11a-c·BF₄⁻ and 12a-c·BF₄⁻ observed in two kinds of cyclization reactions were rationalized on the basis of MO calculations of model compounds 20a and 21a. The spectroscopic and electrochemical properties of 11a-f·BF₄⁻ and 12a-c·BF₄⁻ were studied, and structural characterization of 11c·BF₄⁻ based on the X-ray crystal analysis and MO calculation was also performed.     

Synthesis, structure, and ionic conductivity of Na5Li3Ti2S8

The compound Na₅Li₃Ti₂S₈ has been synthesized by the reaction of Ti with a Na/Li/S flux at 723 K. Na₅Li₃Ti₂S₈ crystallizes in a new structure type with four formula units in space group C2/c of the monoclinic system. The structure contains three crystallographically independent Na⁺ cations and two crystallographically independent Li⁺ cations. Na₅Li₃Ti₂S₈ possesses a channel structure that features two-dimensional layers built from Li(1)S₄ and TiS₄ tetrahedra. The layers, which are stacked along c, comprise eight-membered rings and sixteen-membered rings. Na(3)⁺ cations are located between the eight-membered rings and Na(1)⁺, Na(2)⁺, and Li(2)⁺ cations are located between the sixteen-membered rings. These cations are each octahedrally coordinated by six S²⁻ anions. The ionic conductivity σ_T of Na₅Li₃Ti₂S₈ ranges from 8.8×10⁻⁶ S/cm at 303 K to 3.8×10⁻⁴ S/cm at 483 K. The activation energy E_a is 0.40 eV.     

Synthesis, structure and properties of the Cp2Zr{CH(SiMe3)2} cation

The generation and properties of the Cp₂Zr{CH(SiMe₃)₂}⁺ cation are described. An X-ray crystallographic analysis shows that the carborane salt [Cp₂Zr{CH(SiMe₃)₂}][HCB₁₁Me₅Br₆] contains an agostic Zr-μ-Me-Si interaction in the solid state. Low temperature NMR spectra of the borate salt [Cp₂Zr{CH(SiMe₃)₂}][B(C₆F₅)₄] show that this interaction is retained in solution. Variable temperature NMR spectra establish that the SiMe₂(μ-Me) and unbound SiMe₃ units of Cp₂Zr{CH(SiMe₃)₂}⁺ exchange by a “pivot” process involving partial rotation around the Zr-CH(SiMe₃)₂ bond, with a barrier of ΔG^‡ = 9.2(1) kcal/mol at −89 °C. Cp₂Zr{CH(SiMe₃)₂}⁺ does not coordinate alkenes or alkynes.