Preparation of cobalt-containing bulky monodentate phosphines with electron-withdrawing/donating substituents on bridged arylethynyl and their applications in Suzuki coupling reactions

Several cobalt-containing bulky monodentate phosphines (μ-PPh₂CH₂PPh₂)Co₂(CO)₄(μ,η-(^tBu)₂PCC(C₆H₄R)) (4a: R=H; 4b: R=p-F; 4cp: R=p-CF₃; 4cm: R=m-CF₃; 4d: R=p-OMe) were prepared from the reactions of (^tBu)₂PCC(R-C₆H₄) (2a: R=H; 2b: R=p-F; 2cp: R=p-CF₃; 2cm: R=m-CF₃; 2d: R=p-OMe) with Co₂(CO)₆(μ-PPh₂CH₂PPh₂) 3. Further reactions of 4a, 4b, 4cp, 4cm, and 4d with Pd(OAc)₂ yielded unique palladium complexes (μ-PPh₂CH₂PPh₂)Co₂(CO)₄(μ,η-(^tBu)₂PCC(C₆H₃R)-κC¹)Pd(μ-OAc) (5a: R=H; 5b: R=p-F; 5cp: R=p-CF₃; 5cm: R=m-CF₃; 5d: R=p-OMe, respectively). The strong electron-withdrawing substituents, -F and -CF₃, assist the ortho-metalation process during the formation of 5b, 5cp, and 5cm. The more positively charged palladium center in 5b (or 5cp, 5cm) enhances the probability for PhB(OH)₃⁻ to attack the metal center and the rate of reduction thereafter. DFT studies on the charges of these palladium centers support this assumption. The enhancement of the reaction rates of the Suzuki-Miyaura cross-coupling reactions using 5b, 5cp, and 5cm is thereby attributed to this effect.     

Synthesis, properties, and oxidizing function of 6-substituted 7,9-dimethylcyclohepta[b]pyrimido[5,4-d]pyrrole-8(7H),10(9H)-dionylium tetrafluoroborates

Uracil-annulated heteroazulenes, 6-substituted 7,9-dimethylcyclohepta[b]pyrimido[5,4-d]pyrrole-8(7H),10(9H)-dionylium tetrafluoroborates 7a,b·BF₄⁻, which are the isoelectronic compounds of 5-dezazaflavin, were synthesized. X-Ray crystal analysis and MO calculations were carried out to clarify the structural characteristics of 7a,b·BF₄⁻. The stability of cations 7a,b is expressed by the pK_R+ values which were determined spectrophotometrically to be 10.9 and 11.2, respectively. The electrochemical reduction of 7a,b exhibited high reduction potentials at −0.84 and −0.87 (V vs Ag/AgNO₃) upon cyclic voltammetry (CV). A good linear correlation between the pK_R+ values and reduction potentials (E1_red) of 7a,b·BF₄⁻ and reference compounds 4·BF₄⁻ and 5·BF₄⁻ was obtained. In a search of the reactivity, reactions of 7a,b·BF₄⁻ with some nucleophiles, hydride and diethylamine, were carried out to clarify that the introduction of nucleophiles to give regio-isomers is dependent on the nucleophile. The photo-induced oxidation reactions of 7a,b·BF₄⁻ toward some alcohols under aerobic conditions were carried out to give the corresponding carbonyl compounds in more than 100% yield [based on compounds 7a,b·BF₄⁻], suggesting the oxidizing function of 7a,b·BF₄⁻ toward alcohols in the autorecycling process.     

Synthesis and pharmacological evaluation of 6a,7-dihydro-6H,13H-pyrazino[1,2-a;4,5-a′]diindole analogs as melatonin receptor ligands

The synthesis of two melatonin-derived analogs of the novel 6a,7-dihydro-6H,13H-pyrazino[1,2-a;4,5-a′]diindole ring system is described. The non-methoxy and methoxy analogs, 4a and 4b were prepared in seven steps starting from indoline-2-carboxylic acid 5a and 5-methoxyindoline-2-carboxylic acid 5b, respectively. While 4a exhibited micromolar affinities for both melatonin receptors, the methoxy analog 4b displayed moderate affinity for MT₂ receptors (K_i=0.41 μM) being 4.4-fold higher than for the MT₁ subtype.     

Normal and abnormal carbene complexes derived from thiazole: Preparation and a preliminary investigation of their relative catalytic performance

Readily prepared 2-, 4- and 5-bromo-3-methyl thiazolium triflates react by oxidative substitution with M(PPh₃)₄ (M = Ni or Pd) to furnish five of the expected normal and abnormal cationic thiazolylidene complexes (1a, 1b, 2a, 2b, and 3b). Carbene complex formation is accompanied by a ca. 40 ppm downfield shift of the α-N carbene carbons in Pd complexes 1 and 2 in their ¹³C NMR spectra but the chemical shift of C(carbene) in the abnormal3b (δ 135.7) is particularly low. Crystal and molecular structures of complexes 1a, 2b, and 3b all indicate a square planar arrangement of the ligands around the central metal atoms. The new complexes catalyse Suzuki-Miyaura aryl coupling.     

Stabilization of (N-methyleneamino)imidoylketenes: synthesis of dipyrazolo[1,2-a;1′,2′-d][1,2,4,5]tetrazines

Thermolysis of substituted methyl 1-methyleneamino-4,5-dioxo-4,5-dihydro-1H-pyrrole-2-carboxylates 2a,b led to substituted dimethyl 3,9-dioxo-1,5,7,11-tetrahydro-1H,7H-dipyrazolo[1,2-a;1′,2′-d][1,2,4,5]tetrazine-1,7-dicarboxylates 4a,b and methyl 2,5-dihydro-5-oxo-1H-pyrazole-3-carboxylates 5a,b as minor products. The structure of compound 4a was determined by X-ray crystallography. The proposed mechanism of this conversion includes generation of (N-methyleneamino)imidoylketenes 6a,b and its intramolecular transformation to azomethine imines—5-oxo-2,5-dihydropyrazole-1-methylium-2-ides 7a,b, which undergo dimerization in head-to-tail manner yielding products 4a,b and partially hydrolyse to compounds 5a,b.     

Synthesis and reactivity of para-substituted benzoylmethyltellurium(II and IV) compounds: observation of intermolecular C-H-O hydrogen bonding in the crystal structure of (p-MeOC6H4COCH2)2TeBr2

Bis(p-substituted benzoylmethyl)tellurium dibromides, (p-YC₆H₄COCH₂)₂TeBr₂, (Y=H (1a), Me (1b), MeO (1c)) can be prepared either by direct insertion of elemental Te across C_Rf-Br bonds (where C_Rf refers to α-carbon of a functionalized organic moiety) or by the oxidative addition of bromine to (p-YC₆H₄COCH₂)₂Te (Y=H (2a), Me (2b), MeO (2c)). Bis(p-substituted benzoylmethyl)tellurium dichlorides, (p-YC₆H₄COCH₂)₂TeCl₂ (Y=H (3a), Me (3b), MeO (3c)), are prepared by the reaction of the bis(p-substituted benzoylmethyl)tellurides 2a-c with SO₂Cl₂, whereas the corresponding diiodides (p-YC₆H₄COCH₂)₂TeI₂ (Y=H (4a), Me (4b), MeO (4c)) can be obtained by the metathetical reaction of 1a-c with KI, or alternatively, by the oxidative addition of iodine to 2a-c. The reaction of 2a-c with allyl bromide affords the diorganotellurium dibromides 1a-c, rather than the expected triorganotelluronium bromides. Compounds 1-4 were characterized by elemental analyses, IR spectroscopy, ¹H, ¹³C and ¹²⁵Te NMR spectroscopy (solution and solid-state) and in case of 1c also by X-ray crystallography. (p-MeOC₆H₄COCH₂)₂TeBr₂ (1c) provides, a rare example, among organotellurium compounds, of a supramolecular architecture, where C-H-O hydrogen bonds appear to be the non-covalent intermolecular associative force that dominates the crystal packing.     

Novel and efficient method for esterification, amidation between carboxylic acids and equimolar amounts of alcohols, and amines utilizing Me2NSO2Cl and N,N-dimethylamines; its application to the synthesis of coumaperine, a natural chemopreventive dieneamide

Various carboxylic esters or amides were prepared in good to excellent yield between carboxylic acids and equimolar amounts of alcohols or amines under very mild conditions (0-45°C; within 3 h) using dimethylsulfamoyl chloride (Me₂NSO₂Cl; 1) combined with N,N-dimethylamines (Me₂NR: 2a; R=Me, 2b; R=Bu). The choice of the sulfamoyl chloride and the amine is crucial for the reaction; that is, sterically uncrowded amines accelerated the present esterification and amidation. This agent had some advantages over methanesulfonyl chloride (3)/amines as for the atom-economy, avoidance of side reactions, and had very high chemoselectivity toward the carboxyl group vs the hydroxyl group; the experiment was performed by the addition of 1 to the mixture of carboxylic acids and alcohols. Application of this method to the synthesis of coumaperine, a chemopreventive natural product, was performed using the present amidation as a key step.     

Preparation and characterization of cobalt-containing P,N-ligands and an unusual palladium complex ion pair: their applications in amination reactions

Several cobalt-containing P,N-ligands, alkyne-bridged dicobalt phosphines [(μ-PPh₂CH₂PPh₂)Co₂(CO)₄(μ,η-Me₂NCH₂CCPR₂)] (4a: R=^tBu; 4b: R=Ph; 4c: R=Cy), were prepared from the reactions of corresponding alkynylphosphines Me₂NCH₂CCPR₂ (2a: R=^tBu; 2b: R=Ph; 2c: R=Cy) with a dppm-bridged dicobalt complex [Co₂(CO)₆(μ-P,P-PPh₂CH₂PPh₂)] 3. A unique palladium complex ion pair [(μ-PPh₂CH₂PPh₂)Co₂(CO)₄(μ,η-Me₂NCH₂CCP (^tBu)₂)Pd(η³-C₃H₅)]⁺[(η³-C₃H₅)PdCl₂]⁻7a was obtained from the reaction of 4a with [(η³-C₃H₅)PdCl]₂. Compounds 4a, 4b, and 4c are authentic cobalt-containing P,N-bidentate ligands and can be used for ligation of palladium from various sources such as Pd(OAc)₂ or [(η³-C₃H₅)PdCl]₂. Satisfactory efficiencies were observed for the amination reactions of aryl bromides with morpholine employing either a 4a-chelated palladium complex formed in situ or pre-formed 7a as the catalytic precursor.     

Enantioselective synthesis of (1S,2S)-1,2-di-tert-butyl and (1R,2R)-1,2-di-(1-adamantyl)ethylenediamines

An enantioselective synthesis of sterically congested 1,2-di-tert-butyl and 1,2-di-(1-adamantyl)ethylenediamines has been developed. Thus, diastereomerically pure trans-1-apocamphanecarbonyl-4,5-dimethoxy-2-imidazolidinones 6 and 7 were successfully prepared by optical resolution of (±)-trans-4,5-dimethoxy-2-imidazolidinone using apocamphanecarbonyl chloride (MAC-Cl) followed by stereospecific and stepwise substitution of the dimethoxyl groups using tert-butyl or 1-adamantyl cuprates to provide (4S,5S)-4,5-di-tert-butyl and (4R,5R)-4,5-di-(1-adamantyl)-2-imidazolidinones 12 and 15, respectively. Furthermore, N-acetyl 4,5-di-tert-butyl and 4,5-di-(1-adamantyl)-2-imidazolidinones 16a,b were enantioselectively deacetylated using a catalytic oxazaborolidine system to provide enantiopure 1-p-tolylsulfonyl-4,5-di-tert-butyl-2-imidazolidinones 12 and 19 and 1-p-tolylsulfonyl-4,5-di-(1-adamantyl)-2-imidazolidinones 18 and 20, respectively. Finally, N-p-tolylsulfonyl-2-imidazolidinones 12 and 15 were treated with 30 equiv of Ba(OH)₂·8H₂O to achieve ring cleavage and to provide (1S,2S)-1,2-di-tert-butylethylenediamine 3 and (1R,2R)-1,2-di-(1-adamantyl)ethylenediamine 4.     

Stereocontrolled conversion of some optically active (4S,5R)-dihydroisoxazoles into acyclic 3-acetamido-1,2-diols

Optically active (4S,5R)-dihydroisoxazoles 5a-c (90-91% ee) have been prepared by reaction of the epoxyketones 4a-c with hydroxylamine. Reduction of compounds 5a and 5b using lithium aluminium hydride took place exclusively from the Re face to give (1R,2S,3S)-1,3-disubstituted-3-aminopropane-1,2-diols 6a and 6b. These amino-diols were characterised by N-acetylation and the stereochemical sense of the hydride reduction was confirmed by conversion of amides 7a and 7b into α-amino acid derivatives 10a and 10b.     

Naphthyridines. Part 3: First example of the polyfunctionally substituted 1,2,4-triazolo[1,5-g][1,6]naphthyridines ring system

Treatment of 1,2,4-triazoles (1) with diethylmalonate in bromobenzene gave 1,2,4-triazolo-[1,5-a]pyridines 2. Chlorination of 2 using POCl₃/DMF (Vilsmeier reagent) led to the isolation of 7-chloro-6-formyl-1,2,4-triazolo[1,5-a]pyridine derivative 4, which reacted with the stabilized ylid 5 to afford 6-ethoxycarbonylvinyl-1,2,4-triazolo[1,5-a]-pyridines 6. Azidation of 6 yielded the corresponding azido compound 7, (Scheme 2). Reduction of 7 with Na₂S₂O₄ gave the corresponding 7-amino compound 8, which cyclized in boiling DMF to give the novel 1,2,4-triazolo[1,5-g][1,6]naphthyridines 9. On the other hand, reacting 7 with one equivalent of PPh₃ (aza-Wittig reaction) in CH₂Cl₂ gave 7-imino-phosphorane derivative 10, and subsequent cyclization in boiling DMF afforded the new 1,2,4-triazolo[1,5-g][1,6]naphthyridine derivative 11 (Scheme 3). However, treatment of 10 with phenyl isothiocyanate in 1,2-dichlorobenzene at reflux temperature gave the new 1,2,4-triazolo[1,5-g][1,6]naphthyridine derivative 14 (Scheme 4). Refluxing 6 with excess of a primary amines 15a,b in absolute. EtOH yielded the corresponding 7-alkyl-amino-1,2,4-triazolo[1,5-a]pyridines 16a,b. These obtained amines 16a,b underwent intramolecular heterocyclization in boiling DMF to give the novel 9-alkyl-1,2,4-triazolo[1,5-g][1,6]-naphthyridines 17a,b, in excellent yields (Scheme 5).     

3-Amino- and 3-acylamido-2-phosphonopyridines: synthesis by Pd-catalyzed P-C coupling, structure and conversion to pyrido[b]-anellated PC-N heterocycles

Palladium catalyzed cross-coupling of 3-amino- and 3-acylamido-2-bromopyridines 1a-f with triethyl phosphite allowed the synthesis of 3-amino- and 3-acylamido pyridine-2-phosphonic acid diethyl esters 2a-f, whereas nickel catalysts, although providing access to related anilido-2-phosphonates, proved inactive. Reduction of the aminophosphonate 2a with LiAlH₄ afforded 3-amino-2-phosphinopyridine (3a), which was cyclocondensed with dimethylformamide dimethyl acetal (DMFA) via phosphaalkene intermediates 4a to the novel pyrido[b]-anellated 1,3-azaphosphole 5a. Reaction of amidophosphonates 2b-f with LiAlH₄ did not result in the expected reductive cyclization, as shown by closely related anilido-2-phosphonates, but led to product mixtures containing N-secondary 3-amino-2-phosphinopyridines 3b-f as the main or major component. The conversion of 3b,d,e with DMFA to 5b,d,e provides first examples of N-substituted pyrido[b]-anellated azaphospholes. Structures were confirmed by multinuclear NMR and X-ray crystallography (for 2c, 3b).     

Preparation of new pyrido[3,4-b]thienopyrroles and pyrido[4,3-e]thienopyridazines

Two new types of pyrido-fused tris-heterocycles (1a,b and 2a,b) have been prepared from 3-aminopyridine in five/six steps. A synthetic strategy for the preparation of the novel pyrido[3,4-b]thieno[2,3- and 3,2-d]pyrroles (1a,b) and pyrido[4,3-e]thieno[2,3- and 3,2-c]pyridazines (2a,b) has been studied. The Suzuki cross coupling of the appropriate 2- and 3-thienoboronic acids (3,4) and 4-bromo-3-pyridylpivaloylamide (9) afforded the biaryl coupling products (10,11) in high yields (85%). Diazotization of the hydrolysed (2-thienyl)-coupling product (12) and azide substitution gave the 3-azido-4-(2-thienyl)pyridine intermediate (72%, 14). 3-Azido-4-(3-thienyl)pyridine (15) was prepared by exchanging the previous order of reactions. The desired β-carboline thiophene analogues (1a,b) were obtained via the nitrene by thermal decomposition of the azido precursors (14,15). By optimising conditions for intramolecular diazocoupling, the corresponding pyridazine products (72-83%, 2a,b) were afforded.     

Synthesis and properties of novel 5-(cyclohepta-2′,4′,6′-trienylidene)pyrimidine-2(1H),4(3H),6(5H)-triones: methodology for synthesizing cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborates

Novel condensation reaction of tropone with N-substituted and N,N′-disubstitued barbituric acids in Ac₂O afforded 5-(cyclohepta-2′,4′,6′-trienylidene)pyrimidine-2(1H),4(3H),6(5H)-trione derivatives (8a-f) in moderate to good yields. The ¹³C NMR spectral study of 8a-f revealed that the contribution of zwitterionic resonance structures is less important as compared with that of 8,8-dicyanoheptafulvene. The rotational barriers (ΔG^‡) around the exocyclic double bond of mono-substituted derivatives 8a-c were obtained to be 14.51-15.03 kcal mol⁻¹ by the variable temperature ¹H NMR measurements. The electrochemical properties of 8a-f were also studied by CV measurement. Upon treatment with DDQ, 8a-c underwent oxidative cyclization to give two products, 7 and 9-substituted cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborates (11a-c·BF₄⁻ and 12a-c·BF₄⁻) in various ratios, while that of disubstituted derivatives 8d-f afforded 7,9-disubstituted cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborate (11d-f·BF₄⁻) in good yields. Similarly, preparation of known 5-(1′-oxocycloheptatrien-2′-yl)-pyrimidine-2(1H),4(3H),6(5H)-trione derivatives (14a-d) and novel derivatives 14e,f was carried out. Treatment of 14a-c with aq. HBF₄/Ac₂O afforded two kinds of novel products 11a-c·BF₄⁻ and 12a,c·BF₄⁻ in various ratios, respectively, while that of 14d-f afforded 11d-f. The product ratios of 11a-c·BF₄⁻ and 12a-c·BF₄⁻ observed in two kinds of cyclization reactions were rationalized on the basis of MO calculations of model compounds 20a and 21a. The spectroscopic and electrochemical properties of 11a-f·BF₄⁻ and 12a-c·BF₄⁻ were studied, and structural characterization of 11c·BF₄⁻ based on the X-ray crystal analysis and MO calculation was also performed.     

Solvent-free reactions of N,N′-thiocarbonyldiimidazole with ferrocenylcarbinols

The efficient and simple routes for the synthesis of various ferrocenyl derivatives from ferrocenylcarbinols and N,N′-thiocarbonyldiimidazole (TCDI) are described. It involves grinding the two substrates in a Pyrex tube with a glass rod at room temperature. The reaction of ferrocenylmethanol (1a) provided S,S-bis(ferrocenylmethyl)dithiocarbonate (1b), whose crystal structure and a plausible mechanism for its formation are also reported. The reaction of 1-ferrocenyl-1-phenylmethanol (2a) and 1-ferrocenylbutanol (2b) gave the products 2c and 2d, respectively. The reaction of ω-ferrocenyl alcohols 4-ferrocenylphenol (3a) and 6-ferrocenylhexan-1-ol (3b) yielded the products 3c and 3d, respectively. Reaction of 1,1′-ferrocenedimethanol (3e) afforded 3f in moderate yield, and by contrast, it was not similar to 1b. Reaction of [4-(trifluoromethyl)phenyl]methanol (4a) provided the thiocarbonate 4b in good yield.     

Microwave assisted synthesis of novel imidazo [2,1-b]thiazole derivative attached to quinoxalinones

3-(6-Phenylimidazo[2,1-b]thiazol-5-yl)quinoxalin-2(1H)-ones (qunoxalinone) (6a-q) have been synthesized by the reaction of ethyl 2-oxo-2-(6-phenylimidazo[2,1-b]thiazol-5-yl)acetates (4a-e) with suitably substituted o-phenylenediamines (5a-f) under microwave heating. The ethyl 2-oxo-2-(6-phenylimidazo[2,1-b]thiazol-5-yl)acetates (4a-e) were prepared by the reaction of 6-phenylimidazo[2,1-b]thiazoles (3a-e) with ethyl chlorooxoacetate in refluxing 1,4-dioxane whereas the thiazoles (3a-e) were synthesized by the reaction of 2-bromo-1-phenylethanones (2a-e) with thiazol-2-amine in refluxing acetone.     

Synthesis of 4-substituted azepino[3,4-b]indole-1,5-diones

Mono- or dibromo derivatives 2 and 3 were prepared by an efficient two-step route from 10-methyl-azepino[3,4-b]indole-1,5-dione 1. Elimination reaction on 2 gave access to 4-bromo-10-methyl-2H,10H-azepino[3,4-b]indole-1,5-diones 4. Finally, 4-substituted 10-methyl-2H,10H-azepino[3,4-b]indole-1,5-diones 6-14 were synthesised in good yields from 4 via palladium-mediated cross-coupling reactions.     

Synthese von [(η-C5H5)2Ti(Cl)(CCSiMe3)]Ni(CO) und dessen Reaktionsverhalten gegenüber Phosphiten: die Festkörperstruktur von (CO)2Ni[P(OC6H4CH3-2)3]2

Treatment of [Ti](Cl)(CCSiMe₃) (1) {[Ti]=(η⁵-C₅H₅)₂Ti} with Ni(CO)₄ (2) in a 1:1 molar ratio produces the heterobimetallic early-late transition metal complex {[Ti](Cl)(CCSiMe₃)}Ni(CO) (3), which features a low-valent Ni(CO) entity stabilized by a datively bonded Cl and a η²-coordinated Me₃SiCC ligand. As side-products [Ti]Cl₂ (8) and {[Ti](CCSiMe₃)₂}Ni(CO) (5) are formed. The latter complex can also be synthesized by the reaction of [Ti](CCSiMe₃)₂ (4) with equimolar amounts of 2. If 3 is reacted with stoichiometric amounts of P(OR)₃ (6a, R=C₆H₅; 6b, R=C₆H₄CH₃-2; 6c, R=C₆H₄^tBu-2) the bis(alkynyl) titanocene 4, (CO)₂Ni[P(OR)₃]₂ (7a, R=C₆H₅; 7b, R=C₆H₄CH₃-2; 7c, R=C₆H₄^tBu-2), complex 8, {[Ti](μ,η¹:η²-CCSiMe₃)}₂ (9) along with Me₃SiCCCCSiMe₃ (10) is produced. A possible mechanism for the formation of these species is presented. The solid-state structure of 7b is reported. Complex 7b crystallizes in the tetragonalic space group P-42₁c with the following parameters: a=14.852(2), b=14.852(2), c=19.410(4) Å, V=4281.5(12) ų, Z=4 and ρ=1.271 g cm⁻³. Mononuclear 7b features a Ni(0) centre in a pseudo-tetrahedral environment, caused by the CO and P(OC₆H₄CH₃-2)₃ ligands.     

Synthesis of (4R,15R,16R,21S)- and (4R,15S,16S,21S)-rollicosin

A convergent synthesis of (4R,15R,16R,21S)-rollicosin (1) and (4R,15S,16S,21S)-rollicosin (2) was accomplished. Hydroxy lactone 6a and/or 6b were synthesized from 4-pentyn-1-ol, and α,β-unsaturated lactone 7 was synthesized from γ-lactone 8 and 5-hexen-1-ol. Inhibitory activity of these compounds was examined with bovine heart mitochondrial complex I.     

Convenient syntheses of fluorous phenols of the formula HOC6H5−n((CH2)3(CF2)7CF3)n (n=1, 2) and the corresponding triarylphosphites

The aldehydic benzyl ethers PhCH₂OC₆H₄CHO (2; a/b = para/meta series) are readily available from the corresponding phenols and react with Wittig reagents derived from [Ph₃PCH₂CH₂R_f8]⁺I⁻ (R_f8=(CF₂)₇CF₃) to give PhCH₂OC₆H₄CHCHCH₂R_f8 (86-93%, Z major). Reactions with H₂ over Pd/C give the fluorous phenols HOC₆H₄(CH₂)₃R_f8(4a,b; 87-91%). Condensations with PCl₃ and NEt₃ (3.0:1.0:3.3 mol ratio) give the fluorous phosphites P[OC₆H₄(CH₂)₃R_f8]₃(5a,b; 92-94%), but traces of 4a,b are difficult to remove. The phthalate-based benzyl ethers PhCH₂OC₆H₃(COOR)₂ (7; ,5/3,4 OC₆H₃-3,n-(R)₂ series) are easily accessed and reduced with LiAlH₄ to the diols PhCH₂OC₆H₃(CH₂OH)₂(8c,d; 89-90%). Diol 8c and the Dess-Martin periodinane react to give the dialdehyde PhCH₂OC₆H₃(CHO)₂ (9c; 95%). This is elaborated by a sequence analogous to 2→4→5 to the fluorous phenol HOC₆H₃((CH₂)₃R_f8)₂ (11c; 97%/96%, two steps) and phosphite P[OC₆H₃((CH₂)₃R_f8)₂]₃ (12c, 92%), from which traces of 11c are difficult to remove. Diol 8d can be similarly elaborated to 11d, but the dialdehyde 9d is labile and the combined yield of the Dess-Martin/Wittig steps is 32%. The CF₃C₆F₁₁/toluene partition coefficients of 11c,d, and 12c (two pony tails; 70:30, 72:28, 92:8) are much higher than those of 4a and b (one pony tail; 12:88, 14:86).