Taguchi optimized synthesis of collagen-g-poly(acrylic acid)/kaolin composite superabsorbent hydrogel

A novel biopolymer-based hydrogel composite was synthesized through chemical crosslinking by graft copolymerization of partially neutralized acrylic acid onto the hydrolyzed collagen. The Taguchi method, a robust experimental design, was employed for the optimization of the synthesis based on the swelling capacity of the hydrogels. This method was applied for the experiments and standard L16 orthogonal array with five factors and four levels. In the synthesis of the composite superabsorbent, N,N′-methylene bisacrylamide (MBA) as crosslinker, ammonium persulfate (APS) as initiator, acrylic acid (AA) as monomer, neutralization percent (NU), and collagen/kaolin weight ratio were used as important factors. From the analysis of variance of the test results, the most effective factor controlling equilibrium swelling capacity was obtained and maximum water absorbency of the optimized final product was found to be 674 g/g. The surface morphology of the gel was examined using scanning electron microscopy. Furthermore in this research, swollen gel strength of composite SAPs already swollen under realistic conditions (saline solution absorbency under load) was determined.     

Radiation synthesis of superabsorbent poly(acrylic acid)–carrageenan hydrogels

A series of superabsorbent hydrogels were prepared from carrageenan and partially neutralized acrylic acid by gamma irradiation at room temperature. The gel fraction, swelling kinetics and the equilibrium degree of swelling (EDS) of the hydrogels were studied. It was found that the incorporation of even 1% carrageenan (sodium salt) increases the EDS of the hydrogels from 320 to 800 g/g. Thermal analysis were carried out to determine the amount of free water and bound water in the hydrogels. Under optimum conditions, poly(acrylic acid)–carrageenan hydrogels with high gel fraction (80%) and very high EDS (800 g/g) were prepared gamma radiolytically from aqueous solution containing 15% partially neutralized acrylic acid and 1–5% carrageenan. The hydrogels were also found to be sensitive to the pH and the ionic strength of the medium.     

Gamma radiation synthesis of comb-type graft hydrogels based on poly(acrylic acid) and 4-vinylpyridine

A pH-sensitive comb-type hydrogel was obtained by gamma radiation polymerization and crosslinking of acrylic acid (AAc) in solution. The pH-sensitive 4-vinylpyridine (4VP) was then grafted to the poly acrylic acid (PAAc) hydrogel using gamma radiation from a ⁶⁰Co source. The comb type graft polymers obtained (net-PAAc)-g-4VP has been studied through determination of graft yield and swelling behavior. The critical pH value was found to be 5.6. The apparent mechanical properties appear to be qualitatively better than hydrogels of PAAc upon swelling. The new comb-type system presents faster swelling response (30 h) than the polyacrylic acid hydrogel (50 h). The increase in dose rate from 7.3 to 11.3 kGy h⁻¹, increase the radiation grafting percentage of 4VP in the system. Comb-type polymers were also characterized by DSC, TGA and FTIR-ATR.     

Synthesis of high-performance superabsorbent glycerol acrylate-cross-linked poly (acrylic acid)

Glycerol acrylate (GA) is synthesised by an acryloylation reaction with acryloyl chloride. An ester was used as a cross-linking agent at varying proportions in the synthesis of poly acrylic acid (PAA). The amount of cross-linking density in the product (GA-PAA) and degree of neutralisation determine the absorbency of the polymer samples. A sample of GA-PAA containing 0.8 % GA was discovered to absorb 395 and 66 g/g of water and saline solution, respectively. Different solvent uptakes were tested with the sample showing varying capacity for different solvents. The temperature of the reaction was maintained at 60 °C and a reaction time of 2½ h. FTIR, TGA, SEM and XRD analyses were used to characterise the products.     

Tough superabsorbent poly(acrylic acid) nanocomposite physical hydrogels fabricated by a dually cross-linked single network strategy

In this work, we report a facile method for the preparation of tough and highly stretchable physical hydrogels by dual cross-linking composed of vinyl-hybrid silica nanoparticles(VSNPs) as multivalent covalent cross-linking and hydrogen bonding as physical cross-linking. Poly(acrylic acid) nanocomposite physical hydrogels(NCP gels) are obtained without adding any organic chemical cross-linkers. When the content of VSNPs is 0.7 wt%(relative to the monomer), the NCP gels exhibit good mechanical properties(fracture strength = 370 k Pa, elongation at break = 2200%) and a high swelling capacity in both deionized water(2300 g/g) and saline(220 g/g). Meanwhile, the NCP gels have good recovery ability.     

Synthesis and characterization of zinc chloride containing poly(acrylic acid) hydrogel by gamma irradiation

In this study, the characterization of zinc chloride incorporated into a poly(acrylic acid) (PAAc) hydrogel prepared by gamma-ray irradiation was investigated. Zinc chloride powder with different concentrations was dissolved in the PAAc solution, and it was crosslinked with gamma-ray irradiation. The effects of various parameters such as zinc ion concentration and irradiation doses on characteristics of the hydrogel formed were investigated in detail for obtaining an antibacterial wound dressing.In addition, the gel content, pH-sensitive (pH 4 or 7) swelling ratio, and UV–vis absorption spectra of the zinc particles in the hydrogels were characterized. Moreover, antibacterial properties of these new materials against Staphylococcus aureus and Escherichia coli strains were observed on solid growth media. The antibacterial tests indicated that the zinc chloride containing PAAc hydrogels have good antibacterial activity.     

Fabrication and properties of a novel superabsorbent composite based on coco peat and poly (acrylic acid) cross‐linked trimethylolpropane trimaleate under ultraviolet irradiation

A series of novel poly(acrylic acid)/coco peat (PAA/CP) superabsorbent composites were prepared via the ultraviolet irradiation copolymerization of acrylic acid monomer (PAA) and coco peat cellulose (CP) in the presence of the cross‐linker trimethylolpropane trimaleate. The physico‐chemical structures of obtained PAA/CP were characterized by Fourier transform infrared spectroscopy, thermogravimetry/derivative thermogravimetry, X‐ray diffraction, and scanning electron microscopy, respectively. The critical parameters of affecting the water absorbency of PAA/CP, including the cross‐linker level, amount of CP and reaction time, were studied in detailed. The experimental results showed that the PAA/CP samples exhibited the maximum swelling value of 523.09 g/g in distilled water and 40.52 g/g in 0.9 wt % NaCl solution. The swelling behaviors of PAA/CP were significantly relied on the concentration of salt solution and the pH of external solution. The effect of ions species on the swelling performance was in the order: Na⁺ > Ca²⁺ > Fe³⁺ , and in pH 2.2 and 7.2 aqueous solutions PAA/CP composites displayed better pH‐responsiveness and reversible on‐off switching characteristics. Urea, as an agrochemical model, was loaded into PAA/CP substrate to supply with nitrogen nutrient. The test of their loading and releasing diffusion performance of urea suggested that the urea loading percentage of PAA/CP was remarkably dependent on the concentration of aqueous urea solutions and the release of urea from loaded PAA/CP samples in water followed a non‐Fickian mechanism. Owing to their considerable good water absorption capacity, slow urea release, economical and environment‐friendly merits, PAA/CP composites could be exploited for the agriculture applications. Copyright © 2016 John Wiley & Sons, Ltd.     

Grafting of poly(acrylic acid) onto nonporous glass bead surfaces

The surface of glass beads were modified with covalently bonded poly(acrylic acid). The optimum reaction conditions were determined to graft poly(acrylic acid) effectively onto the glass surface. The dependence of the graft polymer molecular weight, grafting percentage and monomer weight conversion based on these reaction conditions were consistent with free radical kinetics. Grafting efficiency for azobisisobutyronitrile was more complex compared with the benzyl peroxide initiator system © 1997 John Wiley & Sons, Ltd.     

Gamma irradiation effects on poly(hydroxybutyrate)

Brazilian poly(hydroxybutyrate), PHB, as well as its copolymer, poly(hydroxybutyrate-co-valerate), P(HB-co-HV), containing 6.3 mol% of valerate, were irradiated with γ radiation (⁶⁰Co) at ambient temperature and in the presence of oxygen. The viscosity-average molar mass (M_v) was analyzed by the viscosity technique using an Ostwald-type capillary viscometer. The polymers showed a decrease in molar mass with the increase in dose, reflecting the scissions that occurred at random in the main chain. The value G (scissions/100 eV of energy transferred to the system) and the parameter α (scissions per original molecule) were also obtained by the viscosity technique. The melting temperature (T_m) was determined by differential scanning calorimetry (DSC) and showed a decrease with increasing irradiation dose. Analyses of DSC also revealed double endothermic peaks, associated with the polymorphic transitions, which became a single peak with increased dose. Thermogravimetry analysis (TGA) revealed small differences between the decomposition temperatures of the irradiated and non-irradiated samples. The degree of crystallinity of PHB samples, on the other hand, which were obtained by the DSC and X-ray diffraction techniques, increased with the irradiation dose. Changes in the lattice parameter of the irradiated samples and in the size of the crystallites were also observed by X-ray diffraction. The samples used in this work did not pass through any purification process and were analyzed in powder form, exactly as they arrived from the factory.     

Isothermal kinetics of dehydration of equilibrium swollen poly(acrylic acid) hydrogel

An isothermal dehydration of equilibrium swollen poly(acrylic acid) hydrogel in the temperature range from 306 to 361 K was investigated. The specific parameters connected with shape of the conversion curves were defined. The activation parameters (E, lnA) of the isothermal dehydration of equilibrium swollen poly(acrylic acid) hydrogel were calculated, using Johnson-Mehl-Avrami (JMA), ‘initial rate’ and ’stationary point’ methods. The reaction models for the investigated dehydration are determined using the ‘model-fitting’ method. It was established that both, the reaction model and activation parameters of the hydrogel dehydration were completely different for the isothermal process than for the non-isothermal one. It was found that the increase in dehydration temperature lead to the changes in isothermal kinetic model for the investigated hydrogel dehydration. It was established that the apparent activation energy (E) of hydrogel dehydration is similar to the value of the molar enthalpy of water evaporation.     

Modified carrageenan 3. Synthesis of a novel polysaccharide-based superabsorbent hydrogel via graft copolymerization of acrylic acid onto kappa-carrageenan in air

A novel biopolymer-based superabsorbent hydrogel was synthesized through chemically crosslinking graft copolymerization of acrylic acid (AA) onto kappa-carrageenan (κC), in the presence of a crosslinking agent and a free radical initiator. A proposed mechanism for κC-g-polyacrylic acid was suggested and the affecting variables onto graft polymerization (i.e. the crosslinker, the monomer and the initiator concentration, the neutralization percent and reaction temperature) were systematically optimized to achieve a hydrogel with swelling capacity as high as possible. Maximum water absorbency of the optimized final product was found to be 789 g/g. The swelling capacity of the synthesized hydrogels was also measured in various salt solutions. The time-temperature profile of the polymerization reaction, in order to investigate the effect of molecular oxygen was conducted in terms of the absence and presence of the atmospheric oxygen. The overall activation energy (E_a) of the graft polymerization reaction was found to be 2.93 KJ/mol.     

The synthesis and characterization of monodisperse poly(acrylic acid) and poly(methacrylic acid)

A number of polyacrylic (PAA) and polymethacrylic (PMAA) acids have been synthesized by living anionic polymerization of the monomeric tert-butyl esters followed by subsequent hydrolysis of the corresponding polyesters. The necessary precautions were taken in order to assure good molecular weight control, as well as high yields in the polymerization reactions. The intermediate and final polymers were characterized by gel permeation chromatography and NMR-H¹ spectrometry.     

Kinetic of non-isothermal dehydration of equilibrium swollen poly(acrylic acid-co-methacrylic acid) hydrogel

The kinetic of non-isothermal dehydration of equilibrium swollen poly(acrylic acid-co-methacrylic acid) hydrogel (PAM) has been investigated. Thermogravimetric and conversion dehydration curves were recorded at various heating rates 5–30 K min^?1. The conversion dehydration curves at all investigated temperatures can be mathematically described using the logistic regression function in entire. It was found that activation energy complexly changes with the increasing dehydration degree. Physical meaning of the parameters of logistic function (b and w) is given. It was established that, during the dehydration, changes in the fluctuating hydrogel structure occur, and that limiting step on the kinetics of hydrogel dehydration have rate of structural rearrangement of hydrogel (actual relaxation mechanism). A procedure for determining the dependence of effective activation energy on temperature and dehydration degree, based on logistic function, is exposed. Possible explanation for the existence of negative values of activation energy in the certain range of temperature, is given.     

pH responsive adhesion of phospholipid vesicle on poly(acrylic acid) cushion grafted to poly(ethylene terephthalate) surface

Polymer-supported lipid bilayer is a key enabling technology for the design and fabrication of novel biomimetic devices. To date, the physical driving force underlying the formation of polymer-supported lipid bilayer remains to be determined. In this study, the interaction between dipalmitoylphosphocholine (DPPC) vesicle and poly(ethylene terephthalate) [PET] surface with or without grafted poly(acrylic acid) [PAA] layer is examined with several biophysical techniques. First, vesicle deformation analysis shows that the geometry of adherent vesicle on either plain PET or PAA-grafted PET surface is best described by a truncated sphere model. At neutral pH, the degree of deformation and adhesion energy are unaltered by the grafted polymerization of acrylic acid on PET surface. Interestingly, the average magnitude of adhesion energy is increased by 185% and −43% on PAA-grated PET and plain PET surface, respectively, towards an increase of pH at room temperature. Our results demonstrate the possibility of tuning the adhesive interaction between vesicle and polymer cushion through the control of polyelectrolyte ionization on the solid support.     

Radiation synthesis of acrylic acid onto poly(tetraflouroethylene-perflourovinyl ether) film: Chemical modifications and electrical conductivity

Graft-polymerization of acrylic acid (AAc) monomer onto poly(tetraflouroethylene-perflouro vinyl ether) (PFA) copolymer film was carried out using gamma irradiation technique to synthesize grafted copolymer film PFA-g-PAAc (PFA-COOH). The effect of the dose on the degree of grafting of AAc onto PFA film was investigated. The results showed that the degree of grafting increases with increasing the irradiation dose. The grafted [PFA-COOH] film was chemically modified by reaction with aniline to produce modified [PFA-CO-NH-ph] film, followed by sulphonation reaction to introduce sulfonic acid (SO₃H) groups to get other modified [PFA-CO-NH-ph-SO₃H] film. The chemical structures of the grafted and modified films were identified by FT-IR, XRD, and SEM. It is of particular interest to measure the electrical conductivity of grafted and modified membranes as a function of degree of grafting. It was found that the conductivity of the grafted films increases with increasing the degree of grafting, however a slightly increase in conductivity was observed in [PFA-CO-NH-ph-SO₃H] sample. The electrical conductivity property of the modified PFA membranes suggests their possible use for fuel cell applications.     

Needleless electrospinning of poly(acrylic acid) superabsorbent: Fabrication,characterization and swelling behavior

In this work, nanofibrous hydrogel has been fabricated from needleless electrospinning of Poly(acrylic acid) (PAA) in an aqueous solution with different concentrations. First, all solution samples were characterized for pH, surface tension, conductivity and viscosity. Next, electrospinnability of the PAA-water dope solution was investigated using the needleless electrospinning technique under constant conditions. Results indicated that the PAA-water solution was not electrospinnable. Therefore, the neutralization of carboxylic groups in the PAA chemical structure using the NaOH solution was investigated to enhance the PAA electrospinnability. Morphology observation revealed that the fiber diameters ranged from 40 to 250 nm and increased with increasing the solution concentrations. Increasing the neutralization degree (10%, 15% and 20% with 50 wt% NaOH solution) led to increase the dope viscosity and conductivity. The resultant nanofibers could be rendered water-insoluble by incorporating 1,4-butanediol diglycidyl-ether in the PAA-water dope solution, then heat-induced crosslinking was performed using a microwave at different curing times (1–5 min) and temperatures (45–105 °C). The nanofibrous hydrogel mat was then characterized by FTIR. The resulting nanofibrous hydrogel showed remarkable water absorption capacity up to 17,000% and 51,000% (within 15 min) in the standard saline solution and distilled water, respectively.     

Gas transport in surface grafted polypropylene films with poly(acrylic acid) chains

This work describes the grafting reaction of poly(acrylic acid) (PA) onto the surface of polypropylene (PP) films carried out with ultraviolet radiation, using benzophenone as photoinitiator and water as solvent. By increasing the reaction time, graft percentages of 3.5, 6.5, 12.9, 19.8, 29.4, and 36.0% were obtained. Micrographs of the modified films show that grafting exclusively occurs on the PP films surface. The values of the permeability coefficient of oxygen, nitrogen, carbon dioxide, carbon monoxide, argon, methane, ethane, ethylene, and propane across the grafted films undergo a sharp drop. The interpretation of the permeation results suggest that radicals created in the tertiary carbons of the grafted chains by effect of UV light or by chain transfer reactions may highly crosslink the PA grafted layer. A rigid layer involving both strong hydrogen bonding and chains crosslinking is formed at grafting percentages of 3.5% that strongly hinders gas permeation across that layer. Destruction of hydrogen bonding by partially replacing protons of acrylic acid residues by sodium/silver cations increases the permeability of the surface grafted films. Finally, the films permselectivity is hardly affected by the grafted layer. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2421–2431, 2007     

Electroactive hydrogels based on poly(acrylic acid) and polypyrrole

This study is concerned with the preparation of novel composite systems in which the hydrogel of crosslinked poly(acrylic acid) is a matrix and polypyrrole is an electroconducting component. The effects of synthesis conditions on the structure of the composite systems, their ability to swell in water, and mechanical characteristics are studied. The proposed synthesis procedure allows production of a bulk electroconducting phase of polypyrrole in the hydrogel matrix. The effect of crosslink density of hydrogel on the character of polypyrrole distribution in the matrix is studied. The above composites combine the electrical characteristics of polypyrrole with high elasticity and the ability to repeatedly swell the crosslinked poly(acrylic acid).     

Interpenetrating polymer network (IPN) nanogels based on gelatin and poly(acrylic acid) by inverse miniemulsion technique: synthesis and characterization

Novel interpenetrating polymer network (IPN) nanogels composed of poly(acrylic acid) and gelatin were synthesised by one pot inverse miniemulsion (IME) technique. This is based on the concept of nanoreactor and cross-checked from template polymerization technique. Acrylic acid (AA) monomer stabilized around the gelatin macromolecules in each droplet was polymerized using ammonium persulfate (APS) and tetramethyl ethylene diamine (TEMED) in 1:5 molar ratio and cross-linked with N,N-methylene bisacrylamide (BIS) to form semi-IPN (sIPN) nanogels, which were sequentially cross-linked using glutaraldehyde (Glu) to form IPNs. Span 20, an FDA approved surfactant was employed for the formation of homopolymer, sIPN and IPN nanogels. Formation of stable gelatin-AA droplets were observed at 2% surfactant concentration. Dynamic light scattering (DLS) and scanning electron microscopy (SEM) studies of purified nanogels showed small, spherical IPN nanogels with an average diameter of 255 nm. In contrast, sIPN prepared using the same method gave nanogels of larger size. Fourier-transform infrared (FT-IR) spectroscopy, SEM, DLS, X-ray photoelectron spectroscopy (XPS) and zeta potential studies confirm the interpenetration of the two networks. Leaching of free PAA chains in sIPN upon dialysis against distilled water leads to porous nanogels. The non-uniform surface of IPN nanogels seen in transmission electron microscopy (TEM) images suggests the phase separation of two polymer networks. An increase of N/C ratio from 0.07 to 0.17 (from PAA gel to IPN) and O/C ratio from 0.22 to 0.37 (from gelatin gel to IPN) of the nanogels by XPS measurements showed that both polymer components at the nanogel surface are interpenetrated. These nanogels have tailoring properties in order to use them as high potential drug delivery vehicles for cancer targeting.     

Water-soluble hydrogen-bonding interpolymer complex formation between poly(ethylene glycol) and poly(acrylic acid) grafted with poly(2-acrylamido-2-methylpropanesulfonic acid)

Comb-type copolymers of poly(acrylic acid) grafted with poly(2-acrylamido-2-methylpropanesulfonic acid) (PAMPSA) side chains form with poly(ethylene glycol), at low pH, water-soluble hydrogen-bonding interpolymer complexes. Turbidimetry, viscometry, and dynamic light scattering measurements suggest that compact, negatively charged, colloidal nanoparticles are formed at pH<3.75. The influence of the structure of the graft copolymers and of the ionic strength of the solution on the size of these nanoparticles was investigated. It was found that their hydrodynamic radius decreases by increasing the molecular mass of the PAMPSA side chains of the graft copolymer and increases with increasing the ionic strength of the solution.