Carob pod: A new substrate for citric acid production by Aspergillus niger

The production of citric acid from carob pod extract byA. niger in surface fermentation was investigated. A maximum citric acid concentration (85.5 g/L), citric acid productivity (4.07 g/L/d), specific citric acid production rate (0.18 g/g/d), and specific sugar uptake rate (0.358 g/g/d) was achieved at an initial sugar concentration of 200 g/L, pH of 6.5, and a temperature of 30°C. Other kinetic parameters, namely, citric acid yield, biomass yield, specific biomass production rate, and fermentation efficiency were maximum at pH 6.5, temperature 30°C, and initial sugar concentration 100 g/L. The external addition of methanol into the carob pod extract at a concentration up to 4% (v/v) improved the production of citric acid.     

Kinetics of ethanol production from carob pods extract by immobilizedSaccharomyces cerevisiae cells

Kinetics of ethanol production from carob pods extract by immobilizedS. cerevisiae cells in static and shake flask fermentation have been investigated. Shake flask fermentation proved to be a better fermentation system for the production of ethanol than static fermentation. The optimum values of ethanol concentration, ethanol productivity, ethanol yield, and fermentation efficiency were obtained at pH range 3.5–6.5 and temperature between 30–35°C. A maximum ethanol concentration (65 g/L), ethanol productivity (8.3 g/Lh), ethanol yield (0.44 g/g), and fermentation efficiency (95%) was achieved at an initial sugar concentration of 200, 150, 100, and 200 g/L, respectively. The highest values of specific ethanol production rate and specific sugar uptake rate were obtained at pH 6.5, temperature 40°C, and initial sugar concentration of 100 g/L. Other kinetic parameters, biomass concentration, biomass yield, and specific biomass production rate were maximum at pH 5.5, temperature 30°C, and initial sugar concentration 150 g/L. Under the same fermentation conditions non-sterilized carob pod extract gave higher ethanol concentration than sterilized medium. In repeated batch fermentations, the immobilizedS. cerevisiae cells in Ca-alginate beads retained their ability to produce ethanol for 5 d.     

Enhancement of pullulan production by aureobasidium pullulans in batch culture using olive oil and sucrose as carbon sources

The production of pigment-free pullulan byAureobasidium pullulans, using olive oil and sucrose as carbon (C) sources, in shake flasks, was investigated. Optimum medium composition for pullulan elaboration was 80 g/L sucrose, 25 mL/L olive oil, 5 mL/L Tween-80, 10 g/L glutamic acid, and an initial pH of 5.5. Maximum pullulan concentration (51.5 g/L), productivity (8.6 g/L·d), and yield (80.3%) were achieved under these conditions after 120 h of fermentation. The principal advantage of using olive oil and sucrose simultaneously as C sources was the elimination of the inhibitory effect of high sucrose concentrations (> 60 g/L) on pullulan production by the microorganism. Structural characterization by¹³C-NMR, monosaccharide, and methylation analyses, and pullulanase digestion, combined with size-exclusion chromatography, confirmed the identity of pullulan and the homogeneity of the released polysaccharide in the fermentation broths. There were no significant differences in structure between pullulan samples isolated from either olive oil-supplemented media or olive oil-free media. The molecular size of pullulan from the combined olive oil-sucrose fermentation was slightly lower (1.1 X 10⁶) than that of conventional fermentation with sucrose as a single C source (1.4 X 10⁶). Lowering the initial pH of the medium resulted in increased molecular size for the released polymer, but a lower pullulan yield.     

Effect of the shear rate on pullulan production from beet molasses by Aureobasidium pullulans in an airlift reactor

The effect of the shear rate on pullulan production from beet molasses by Aureobasidium pullulans P56 in an airlift reactor was investigated. A maximum polysaccharide concentration (18.5 g/L), biomass dry weight (14.0 g/L), polysaccharide yield (38.5%), and sugar utilization (96%) was achieved at a shear rate of 42 s⁻¹. A. pullulans grown on beet molasses produced a mixture of pullulan and other polysaccharides. The highest value of pullulan proportion (30% of total polysaccharide) was obtained at a low shear rate (42 s⁻¹). The apparent viscosity of the fermentation broth increased as the shear rate increased up to 42 s⁻¹ and then decreased. On the other hand, the dissolved oxygen concentration and the volumetric mass transfer coefficient increased with the increase of the shear rate from 21 to 84 s⁻¹. The external addition of L-glutamic acid, olive oil, and Tween-80 improved significantly the production of crude polysaccharide (27.0 g/L), but the pullulan content of the polysaccharide was low (20%).     

Production and characterization of pullulan from beet molasses using a nonpigmented strain of Aureobasidium pullulans in batch culture

The production of pullulan from beet molasses by a pigment-free strain of Aureobasidium pullulans on shake-flask culture was investigated. Combined pretreatment of molasses with sulfuric acid and activated carbon to remove potential fermentation inhibitors present in molasses resulted in a maximum pullulan concentration of 24 g/L, a biomass dry wt of 14 g/L, a pullulan yield of 52.5%, and a sugar utilization of 92% with optimum fermentation conditions (initial sugar concentration of 50 g/L and initial pH of 7.0). The addition of other nutrients as carbon and nitrogen supplements (olive oil, ammonium sulfate, yeast extract) did not further improve the production of the exopolysaccharides. Structural characterization of the isolated polysaccharides from the fermentation broths by ¹³C-nuclear magnetic resonance spectroscopy and pullulanase digestion combined with size-exclusion chromatography confirmed the identity of pullulan and the homogeneity (>93% dry basis) of the elaborated polysaccharides by the microorganism. Using multiangle laser light scattering and refractive index detectors in conjunction with high-performance size-exclusion chromatography molecular size distributions and estimates of the molecular weight (M _w =2.1−4.1×10⁵), root mean square of the radius of gyration (R _g =30−38 nm), and polydispersity index (M _w /M _n =1.4−2.4) were obtained. The fermentation products of molasses pretreated with sulfuric acid and/or activated carbon were more homogeneous and free of contaminating proteins. In the concentration range of 2.8−10.0 (w/v), the solution’s rheologic behavior of the isolated pullulans was almost Newtonian (within 1 and 1200 s⁻¹ at 20°C); a slight shear thinning was observed at 10.0 (w/v) for the high molecular weight samples. Overall, beet molasses pretreated with sulfuric acid and activated carbon appears as an attractive fermentation medium for the production of pullulan by A. pullulans.     

Synthesis and characterization of a novel extracellular polysaccharide by Rhodotorula glutinis

The aim of this work was to characterize an exopolysaccharide by Rhodotorula glutinis KCTC 7989 and to investigate the effect of the culture conditions on the production of this polymer. The extracellular polysaccharide (EPS) produced from this strain was a novel acidic heteropolysaccharide composed of neutral sugars (85%) and uronic acid (15%). The neutral sugar composition was identified by gas chromatography as mannose, fucose, glucose, and galactose in a 6.7:0.2:0.1:0.1 ratio. The molecular weight of purified EPS was estimated to be 1.0−3.8×10⁵ Dalton, and the distribution of the molecular weight was very homogeneous (polydispersity index =1.32). The EPS solution showed a characteristic of pseudoplastic non-Newtonian fluid at a concentration >2.0% in distilled water. The maximum EPS production was obtained when the strain was grown on glucose (30 g/L). Ammonium sulfate was the best suitable nitrogen source for EPS production. The highest yield of EPS was obtained at a carbon to nitrogen ratio of 15. The EPS synthesis was activated at the acidic range of pH 3.0–5.0 and increased when the pH of the culture broth decreased naturally to <2.0 during the fermentation. When the yeast was grown on glucose (30 g/L) and ammonium sulfate (2 g/L) at 22°C at an initial pH of 4.0, EPS production was maximized (4.0 g/L), and the glucose-based production yield coefficient and carbon-based production yield coefficient were 0.30 g of EPS/g of glucose and 0.34 g (carbon of EPS)/g (carbon of glucose), respectively.     

Investigating the influence of pH,temperature and agitation speed on yellow pigment production by Penicillium aculeatum ATCC 10409

In this study, the combined effect of pH, temperature and agitation speed on yellow pigment production and mycelial growth of Penicillium aculeatum ATCC 10409 was investigated in whey media. Different pH levels (5, 6.5 and 8), temperatures (25, 30 and 35°C) and agitation speed levels (100 and 150 rpm) were tested to determine the best conditions to produce a fungal yellow pigment under submerged fermentation. The best production of yellow pigment (1.38 g/L) was obtained with a pH value of 6.5, a temperature of 30°C and an agitation speed of 150 rpm. In contrast, the maximal biomass concentration (11.12 g/L) was obtained at pH value of 8, a temperature of 30°C and an agitation speed of 100 rpm. These results demonstrated that biomass and yellow pigment production were not directly associated. The identification of the structure of unknown P. aculeatum yellow pigment was detected using UV absorption spectrum and FT-IR spectroscopy.     

Effects of environmental conditions on xylose reductase and xylitol dehydrogenase production by Candida guilliermondii

The effects of environmental conditions, namely initial pH (2.5–7.0) and temperature (25 and 35°C), on xylose reductase and xylitol dehydrogenase levels, as well as on xylitol production, were evaluated. Although the fermentative parameter values increased with an increase in pH and temperature (the maximum Y_P/s and Q _p were 0.75 g/g and 0.95 g/[L·h], respectively, both attained at pH 6.0, 35°C), the highest xylose reductase activities (nearly 900 1U/mg of protein) were observed at an initial pH varying from 4.0 to 6.0. Xylitol dehydrogenase was favored by an increase in both initial pH and temperature of the medium. The highest xylitol dehydrogenase specific activity was attained at pH 6.5 and 35°C (577 1U/mg of protein).     

Fermentation of Sugarcane Bagasse and Chicken Manure to Calcium Carboxylates under Thermophilic Conditions

Sugarcane bagasse and chicken manure were anaerobically fermented to carboxylic acids using a mixed culture of marine microorganisms at 55 °C. Using the MixAlco process— an example of consolidated bioprocessing— the resulting carboxylate salts can be converted to mixed alcohol fuels or gasoline. To enhance digestibility, sugarcane bagasse was lime pretreated with 0.1 g Ca(OH)₂/g dry biomass at 100 °C for 2 h. Four-stage countercurrent fermentation of 80% sugarcane bagasse/20% chicken manure was performed at various volatile solids (VS) loading rates and liquid residence times. Calcium carbonate was used as a buffer during fermentation. The highest acid productivity of 0.79 g/(L day) occurred at a total acid concentration of 21.5 g/L. The highest conversion (0.59 g VS digested/g VS fed) and yield (0.18 g total acids/g VS fed) occurred at a total acid concentration of 15.5 g/L. The continuum particle distribution model (CPDM) predicted the experimental total acid concentrations and conversions at an average error of 10.14% and 12.68%, respectively. CPDM optimizations show that high conversion (>80%) and total acid concentration of 21.3 g/L are possible with 300 g substrate/(L liquid), 30 days liquid residence time, and 3 g/(L day) solid loading rate. Thermophilic fermentation has a higher acetate content (∼63 wt%) than mesophilic fermentation (∼39 wt%).     

Screening of Variables Influencing the Clavulanic Acid Production by <Emphasis Type="Italic">Streptomyces</Emphasis> DAUFPE 3060 Strain

Clavulanic acid (CA) is a β-lactam antibiotic, which has a potent β-lactamase inhibiting activity. The influence of five variables, namely pH (6.0, 6.4, and 6.8), temperature (28°C, 30°C, and 32°C), agitation intensity (150, 200, and 250 rpm), glycerol concentration (5.0, 7.5, and 10 g/L) and soybean flour concentration (5.0, 12.5, and 20 g/L), on CA production by a new isolate of Streptomyces (DAUFPE 3060) was investigated in 250-mL Erlenmeyer flasks using a fractional factorial design. Temperature and soybean flour concentration were shown to be the two variables that exerted the most important effects on the production of CA at 95% confidence level. The highest CA concentration (494 mg/L) was obtained after 48 h at 150 rpm, 32°C, pH 6.0, 5.0 g/L glycerol, and 20 g/L soybean flour concentrations. Under these conditions, the yields of biomass and product on consumed substrate were 0.26 g_X/g_S and 64.3 mg_P/g_S, respectively. Fermentations performed in 3.0-L bench-scale fermenter allowed increasing the CA production by about 60%.     

Production of l-asparaginase, an anticancer agent, from Aspergillus niger using agricultural waste in solid state fermentation

This article reports the production of high levels of l-asparaginase from a new isolate of Aspergillus niger in solid state fermentation (SSF) using agrowastes from three leguminous crops (bran of Cajanus cajan, Phaseolus mungo, and Glycine max). When used as the sole source for growth in SSF, bran of G. max showed maximum enzyme production followed by that of P. mungo and C. cajan. A 96-h fermentation time under aerobic condition with moisture content of 70%, 30 min of cooking time and 1205–1405 μ range of particle size in SSF appeared optimal for enzyme production. Enzyme yield was maximum (40.9±3.35 U/g of dry substrate) at pH 6.5 and temperature 30±2°C. The optimum temperature and pH for enzyme activity were 40°C and 6.5, respectively. The study suggests that choosing an appropriate substrate when coupled with process level optimization improves enzyme production markedly. Developing an asparaginase production process based on bran of G. max as a substrate in SSF is economically attractive as it is a cheap and readily available raw material in agriculture-based countries.     

Production of chitinolytic enzymes with Trichoderma longibrachiatum IMI 92027 in solid substrate fermentation

Thirty Trichoderma strains representing 15 species within the genus were screened for extracellular production of chitinolytic enzymes in solid substrate fermentation. Trichoderma longibrachiatum IMI 92027 (ATCC 36838) gave the highest yield (5.0 IU/g of dry matter of substrate) after 3 d of fermentation on wheat bran-crude chitin (9:1 mixture) medium. The optimal moisture content (66.7%), chitin content (20%), initial pH of the medium (2.0–5.0), and time course (5 d) of solid substrate fermentation were determined for strain IMI 92027. Cellulase, xylanase, α-amylase, and β-xylosidase activities were also detected. The pH and temperature optima of the chitinase complex of T. longibrachiatum IMI 92027 were 4.5 and 55°C, respectively. The enzyme totally lost its activity at 70°C in 5 min in the absence of the substrate but retained about 15% of its initial activity even at 70°C after a 60-min incubation in the presence of solid substrate fermentation solids. Purification of protein extract from the solid substrate fermentation material revealed high chitinolytic activities between pI 5.9 and 4.8, where N-acetyl-β-d-hexosaminidase and chitinase peaks have been found in the same pI range. Two chitinases of 43.5 and 30 kDa were purified at acidic pI.     

Long term stability of organic selenium species in aqueous solutions

Long term stability of organic selenium compounds (selenocystine, selenomethionine, trimethylselenonium ion) has been studied over a one year period for 2 analyte concentrations: 25 and 150 μg/L Se, at pH 4.5 in the dark, under different storage conditions: temperature of –20°C, 4°C, 20°C, 40°C; in Pyrex, Teflon, or polyethylene containers; in an aqueous matrix or in the presence of a chromatographic counter ion (pentyl sulfonate at 10^–4 mol/L concentration). Light effects have also been tested. The stability of the selenium species was monitored by HPLC-ICP/MS. Storage conditions can drastically alter the stability of organic selenium species. Organoselenium compounds were shown to be stable in the dark over a one year period in an aqueous matrix at pH 4.5 in Pyrex containers at both 4°C and 20°C. Pyrex vials exposed to natural sunlight at room temperature resulted in a steady decrease of the selenoamino acid concentration. Teflon containers caused losses of less than 25% at both 4° C and 20° C in the dark. However, polyethylene vials presented, at all temperatures tested, a rapid decrease of the TMSe⁺ concentration. The stability of the Se species studied did not show significant differences between 4° C and 20° C in any container material used. Storage of solutions at 40° C led to slight differences between the Pyrex and Teflon containers. However, polyethylene presented a drastic decrease of the three species over time at this higher temperature. Solutions frozen at –20° C in polyethylene vials did not stabilize the TMSe⁺ signal. Finally, concentrations and matrices of the samples did not significantly affect the stability of the species. Received: 15 July 1996 / Revised: 14 July 1997 / Accepted: 18 July 1997     

Enhancement of oxygen transfer by pressure pulsation in aqueous glycerol fermentation

Aeration plays an important role in the production of glycerol by fermentation with yeast. Effective aeration depends on a number of factors, such as amount of air, fineness of air dispersion, rate of agitation, and time of gasliquid contact. This investigation dealt with the effect of periodic variation in gas pressure on oxygen transfer measured by sulfite oxidation and glycerol fermentation in stirred tanks. The oxygen transfer rate measured with the sulfite oxidation method was improved by 20–30% under the condition of pressure pulsation (PP) at 30°C. The yield and productivity of glycerol were increased by about 26 and 6.8%, respectively, in 48 h by employing a glucose concentration of 250 g/L with PP at 30°C.     

Production of lactic acid from food wastes

Conversion of food wastes into lactic acid by simultaneous saccharification and fermentation (SSF) was investigated. The process involves saccharification of the starch component in food wastes by a commercial amylolytic enzyme preparation (a mixture of amyloglucosidase, α-amylase, and protease) and fermentation by Lactobacillus delbrueckii. The highest observed overall yield of lactic acid in the SSF was 91% of theoretical. Lactic acid concentration as high as 80 g/L was attainable in 48 h of the SSF. The optimum operating conditions for the maximum productivity were found to be 42°C and pH 6.0. Without supplementation of nitrogen-containing nutrients, the lactic acid yield in the SSF decreased to 60%: 27 g/L of lactic acid from 60 g/L of food waste. The overall performance of the SSF, however, was not significantly affected by the elimination of mineral supplements.     

Combined use of β-cyclodextrin and ionic liquid as electrolyte additives in EKC for separation and determination of carob's phenolics—A study of the synergistic effect

In this work, a simple, reliable, and fast capillary electrophoretic method was developed and validated for the simultaneous determination of 12 polyphenolic compounds, the most frequently found in carob's pulp and seeds. The present work deals with the development of a novel dual electrophoretic system based on the combined use of β-CD and ionic liquid (IL) as buffer additives. A baseline separation of the target analytes was achieved in less than 10 min by using a BGE consisting of 35 mM borate along with 15 mM β-CD and 3 mM l -alanine tert butyl ester lactate (l -AlaC₄Lac) IL as buffer additives at pH 9.5, a temperature of 25°C, and an applied voltage of 30 kV. The application of the developed electrophoretic method to real samples enabled the identification and quantification of the main phenolic constituents of both ripe and unripe carob pulp extracts. The results revealed the predominance of gallic acid in both ripe (183.92 μg/g carob pulp) and unripe (205.10 μg/g carob pulp) carob pulp and highlighted the great influence of the ripening stage on carobs polyphenolic composition, with unripe pods being more enriched in polyphenols (total phenolics detected: 912.58 and 283.13 μg/g unripe and ripe carob pulp).     

Amperometric determination of xanthine in tea,coffee, and fish meat with graphite rod bound xanthine oxidase

A method is described for construction of an amperometric xanthine biosensor based on graphite rod modified through adsorption of xanthine oxidase. Enzymatically produced H₂O₂ from xanthine was split into 2H⁺ + O₂ + 2^e− at 0.6 V and the current was measured, which was directly proportional to xanthine concentration ranging from 1 ° 10⁻⁷ to 6 ° 10⁻⁷ M with a detection limit of 1 ° 10⁻⁷ M. The biosensor exhibited optimum response within 35 sec at pH 7.0 and 35°C. It was employed for determination of xanthine in tea leaves (0.9 ° 10⁻⁵−2.5 ° 10⁻⁵ mmol/g), coffee powder (3.2 μmol/g) and fish meat (90 mmol/g). The content of xanthine in fish meat increased 6.5 times with its storage at room temperature during 15 days. The enzyme electrode could be reused 200 times during the span of 30 days, when stored in reaction buffer at 4°C.     

Production of nisin by Lactococcus lactis in media with skimmed milk

Nisin is a bacteriocin that inhibits the germination and growth of Gram-positive bacteria. With nisin expression related to growth conditions of Lactococcus lactis subsp. lactis, the effects of growth parameters, media components, and incubation time were studied to optimize expression. L. lactis ATCC 11454 was grown (100 rpm at 30°C for 36 h) in both M17 and MRS standard broth media (pH 6.0–7.0) supplemented with sucrose (1.0–12.5 g/L), potassium phosphate (0.13 g/L), asparagine (0.5 g/L), and sucrose (0.24 g/L), and diluted 1:1 with liquid nonfat milk. Liquid nonfat milk, undiluted, was also used as another medium (9% total solids, pH 6.5). Nisin production was assayed by agar diffusion using Lactobacillus sake ATCC 15521 (30°C for 24 h) as the sensitive test organism. The titers of nisin expressed and released in culture media were quantified and expressed in arbitrary units (AU/L of medium) and converted into known concentrations of “standard nisin” (Nisaplin®, g/L). The detection of nisin activity was <0.01 AU/L in M17 and MRS broths, and 7.5 AU/L in M17 with 0.14% sucrose or 0.13% other supplements, and the activity increased to 142.5 AU/L in M17 diluted with liquid nonfat milk (1:1). The 25% milk added to either 25% M17 or 25% MRS provided the highest levels of nisin assayed.     

Biosorption of Cr(VI) from Water Using Biomass of <Emphasis Type="Italic">Aeromonas hydrophila</Emphasis>: Central Composite Design for Optimization of Process Variables

The potential use of biomass of Aeromonas hydrophila for biosorption of chromium from aqueous solution was investigated. The variables (pH, initial Cr(VI) concentration, biomass dose, and temperature) affecting process were optimized by performing minimum number of experimental runs with the help of central composite design. The results predicted by design were found to be in good agreement (R ² = 99.1%) with those obtained by performing experiments. Multiple regression analysis shows that uptake decreases with increase in pH and biomass dose, whereas it increases with increase in temperature and concentration. The maximum removal of Cr(VI) predicted by contour and optimization plots was 184.943 mg/g at pH 1.5, initial Cr(VI) concentration 311.97 mg/L, temperature 60 °C, and biomass dose 1.0 g. The removal of Cr(VI) was governed by adsorption of Cr(VI) as well as its reduction into Cr(III), which further gets adsorbed. The sorption capacity of biomass was calculated from experimental data using Langmuir sorption model and was found to be 151.50 mg/g at 40 °C and pH 1.5, which is comparable to other biosorbents. In addition to this, Dubinin–Radushkevich model was applied, and it was found that nature of sorption was chemisorption.     

Succinic Acid Production from Cheese Whey using Actinobacillus succinogenes 130 Z

Actinobacillus succinogenes 130 Z was used to produce succinic acid from cheese whey in this study. At the presence of external CO₂ supply, the effects of initial cheese whey concentration, pH, and inoculum size on the succinic acid production were studied. The by-product formation during the fermentation process was also analyzed. The highest succinic acid yield of 0.57 was obtained at initial cheese whey concentration of 50 g/L, while the highest succinic acid productivity of 0.58 g h⁻¹ L⁻¹ was obtained at initial cheese whey concentration of 100 g/L. Increase in pH and inoculum size caused higher succinic acid yield and productivity. At the preferred fermentation condition of pH 6.8, inoculum size of 5% and initial cheese whey concentration of 50 g/L, succinic acid yield of 0.57, and productivity of 0.44 g h⁻¹ L⁻¹ were obtained. Acetic acid and formic acid were the main by-products throughout the fermentation run of 48 h. It is feasible to produce succinic acid using lactose from cheese whey as carbon resource by A. succinogenes 130 Z.