Practical aspects of the dependence of polarity on temperature

Summary It is not commonly appreciated that retention indices are temperature dependent. It is even less common to express this fact in more practical terms by saying that polarity is temperature dependent. Although the meaning of both statements is identical, we believe the second to be particularly relevant, since the majority of practical gas chromatographers tends to handle polarity as an invariable characteristic of a stationary phase.The variability of polarity with temperature is the major source of inadequate reproducibility of exact finger-printing, this particularly when gc/ms traces have to be compared to those obtained by pure gc. On the other hand, the temperature dependence provides a practical means to optimize the polarity of a given column for a given analysis. Film thickness is an essential parameter in this context because of its influence on column temperature and, therefore, on column polarity.     

Electron exchange in the tetracyanoquinodimethane system: Unexpected dependence on solvent polarity and viscosity

The electron transfer rate between tetracyanoquinodimethane and its radical anion is measured for different solvents and temperatures using ESR line broadening. The solvent polarity term γ = 1/n² - 1/ε (n is the refractive index, ε the dielectric constant) could be changed in the range 0.05 ≤ γ ≤ 0.53. The true rate constants k (corrected for diffusion) are discussud in terms of the classical theory of electron transfer. A linear dependence of ln k on γ is only found with a viscosity-dependent pre-exponential factor. The outer reorganization energy is small compared with the inner and has a negative sign. This is explained by the special arrangement of the ellipsoidal reactants in the activated complex.     

Microwave-assisted solid-phase synthesis of 2,5-diketopiperazines: solvent and resin dependence

Solid-phase synthesis of diketopiperazines (DKPs) was preformed using various combinations of resins (polystyrene, TentaGel, ArgoGel, and PEGA) and solvents (toluene, tert-butyl alcohol, water, and toluene/2-butanol (1:4, v/v). The DKPs were synthesized from solid-phase bound dipeptides via intramolecular aminolysis. Both thermal and microwave-assisted solid-phase synthesis of DKPs gave high yields of products independently of resin and organic solvent used; however, only the PEGA resin resulted in high yields of DKPs in water independent of heating method. The short reaction times, high yields, and the possibility to run reactions in water when an appropriate resin is used makes the microwave-assisted solid-phase synthesis the method of choice. The method should be suitable for solid-phase synthesis of diketopiperazine-based libraries.     

The influence of solvent polarity and viscosity on fluorescence of quinolizinium salts

The effects of dielectric constant, viscosity and polarity of the solvents used on the relative fluorescent emission of 2,3-diphenylquinolizinium bromide and 2(p-dimethyl-amino)styryl-3-methylquinolizinium bromide are described. These salts were entirely dissolved in ten different solvents. The 2(p-dimethylamino)styryl derivative produced different ionic species, and was a fluorescent acid-base indicator. The fluorescence of these quinolizinium salts is shown to increase with greater viscosity of the medium.     

Stereoselective synthesis of skipped polyols by substrate-directed asymmetric induction

[formula: see text] A series of C2- or sigma-symmetric oligo-1,3-dioxanylmethanes, 2-5, have been prepared using a bidirectional approach. In bidirectional syntheses of meso compounds, only substrate-based asymmetric induction could be applied. 1,3-Asymmetric induction in Mukaiyama-aldol additions, 1,5-asymmetric induction in enol-borinate aldol reactions, and 1,3-anti-selective reduction of aldols turned out to be reliable tools in the preparation of compounds 3-5.     

Biomimetic synthesis of (+/-)-galanthamine and asymmetric synthesis of (-)-galanthamine using remote asymmetric induction

(+/-)-Galanthamine (1) was synthesized in excellent yield by applying PIFA-mediated oxidative phenol coupling of N-(4-hydroxy)phenethyl-N-(3',4',5'-trialkoxy)benzyl formamide (15b) as a key step. Because of the symmetrical characteristics of the pyrogallol moiety in the substrate (15b), the phenol coupling resulted in a sole coupling product except for volatile components from the oxidizing agent. On the basis of the successful results of the above strategy, (-)-galanthamine (1) was synthesized by employing a novel remote asymmetric induction, where conformation of the seven-membered ring in the product of the phenol coupling was restricted by forming a fused-chiral imidazolidinone ring with D-phenylalanine on the benzylic C-N bond of the tri-O-alkylated gallyl amino moiety. The conformational restriction and successive debenzylation of the protected hydroxyl groups on the pyrogallol ring caused diastereoselective cyclization to yield a cyclic ether having the desired stereochemistry for the synthesis of (-)-1.     

Unusual temperature dependence of enantioselectivity in asymmetric reductions by chiral NADH models

[reaction: see text] Unusual stereoselectivity changes, i.e., enhancement and inversion of enantioselectivity with increasing temperature, were observed in the asymmetric reduction of methyl benzoylformate with chiral 1,4-dihydropyridines possessing amino acid residues as ligating chiral auxiliaries. The differential activation parameters, DeltaDeltaH(S-R) and DeltaDeltaS(S-R), obtained from the Eyring plots demonstrate that the entropy term controls the enantiodifferentiating step, accounting for the observed unique temperature dependencies.     

The relation between the nonlinear dielectric effect and solvent polarity

The relation between solvent polarity expressed through the Dimroth-Reichardt spectroscopic parameter E _T (30) and the nonlinear dielectric effect (NDE) expressed through the parameter /E² is demonstrated where is a change in the electric permittivity of a solvent in an external strong electric field E. Both E _T (20) and /E², determined in quite different ways, are extremely sensitive to the dielectric properties of a solvent which depend on molecular interactions. Linear correlations between /E² and E _T (30) have been found for n-alkanols representing hydrogenbond donor solvents, and for halogenobenzenes which are dipolar, aprotic, weakly-associated solvents.Part of this work was presented at The 22^nd International Conference on Solution Chemistry in Linz, Austria, July 1991.     

手性胶束的不对称诱导作用不对称苯偶姻缩合反应

胶束体系是模拟酶的简单模型之一。手性胶束对反应有手性诱导作用。在表面活性剂(1R，2S)-(-)-N-十二烷基-N-甲基麻黄素溴化物和(1R，2S)-(-)-N-十六烷基-N-甲基麻黄素溴化物形成的胶束体系中进行的苯偶姻缩合反应，生成了光学活性的α-羟基酮。     

The influence of solvent polarity and metalation on energy and electron transfer in porphyrin-phthalocyanine heterotrimers

Heteroporphyrin and -phthalocyanine arrays represent an attractive class of light harvesters and charge-separation systems exhibiting an easy route of synthesis and high chemical stability. In the present work, we report the results of photophysical investigations of two novel non-sandwich-type porphyrin-phthalocyanine heterotriads, in which two meso-tetraphenylporphyrin rings (H2TPP or ZnTPP) are linked to the central silicon atom of a silicon(IV) phthalocyanine core. It was found that the photophysical properties of the triads (H2Tr and ZnTr) in N,N-dimethylformamide (DMF) and toluene are strongly affected by two different types of interaction between the porphyrin (P) and the phthalocyanine (Pc) parts, namely excitation energy transfer (EET) and photoinduced charge transfer. The first process results in appearance of the Pc fluorescence when the P-part is initially excited, and plays a dominant role in fast depopulation of the first excited singlet state of the P moiety. If the first excited singlet state of the Pc-part is populated (either directly or via EET), it undergoes fast depopulation by hole transfer (HT) to the charge-separated (CS) state. In polar DMF, the CS state is the lowest excited state, and the charge recombination occurs directly to the ground state. Using transient absorption spectroscopy, the lifetime of the CS state was estimated to be 30 and 20 ps for H2Tr and ZnTr, respectively. In nonpolar toluene, the energy gap between the first excited singlet state of the Pc-part and the CS state is very small, and back HT occurs in both triads, resulting in appearance of "delayed fluorescence" of the Pc-part with a decay time similar to the lifetime of the CS state (190 and 280 ps for H2Tr and ZnTr, respectively). Since the energy of the CS state of ZnTr in toluene is lower than that of H2Tr, the probability of back HT for ZnTr is lower. This was clearly proved by decay-associated fluorescence spectral measurements.     

Unusual inverse temperature dependence on reaction rate in the asymmetric autocatalytic alkylation of pyrimidyl aldehydes

Observations of an intriguing inverse temperature dependence on reaction rate and a profound induction period in the Soai autocatalytic reaction are reported along with detailed kinetic and NMR investigations of the product alkoxide at low temperatures, leading to the suggestion that the active catalyst is derived in situ from the tetrameric ground state.     

Tether-controlled cycloadditions for the asymmetric synthesis of decalins: increased selectivity in acetonitrile solvent

[reaction: see text] The beneficial influence of cis-isopropylidene acetal tether control groups, to facilitate the asymmetric synthesis of substituted decalins by intramolecular Diels-Alder reactions, is described. Compared to trans-acetonides, these cases proceed under milder conditions to afford the cis-fused adducts from an endo transition state. An unusual acetonitrile solvent effect exerts a dramatic influence on the diastereoselectivity. This strategy leads to the chiral nonracemic bicyclo[4.4.0]decane core of diverse natural products.     

The effect of temperature and solvent on the synthesis and properties of nylon 610 made from sebacyl bisketene

Polyamides were synthesized at ?60°, ?40°, ?20°, and 0°C from sebacyl bisketene and 1,6-hexamethylenediamine in either acetone or methylene chloride. At the lower reaction temperatures oligomers predominated in solution but at 0°C the product was crosslinked. The polyamides were subjected to m-cresol extraction at elevated temperatures for up to 14 days. The m-cresol soluble and insoluble fractions were characterized by weight, infrared spectroscopy, dilute solution viscosity, and gel permeation chromatography. Infrared analysis of the soluble and insoluble portions showed the degree of branching of the polyamide, identified the branching point at the secondary amide proton position, and gave an indication of the degree of branching required before insoluble products resulted. Dilute solution viscosity and gel permeation chromatography were used to demonstrate the existence of low molecular weight (M_w) oligomer species in the soluble portion. Differential scanning calorimetry experiments revealed that polyamides synthesized below their glass transition temperature would not crystallize which resulted in abnormal thermal characteristics. Annealing at elevated temperatures allowed crystallization to occur and the expected thermal character to develop.     

Water-organic solvent systems in countercurrent chromatography: Liquid stationary phase retention and solvent polarity

Countercurrent chromatography (CCC) is a separation technique in which the stationary phase is a liquid. The liquid stationary phase retention is a critical problem in CCC. The retention of 18 organic solvents in a hydrodynamic CCC apparatus was measured with an aqueous mobile phase, the centrifuge spin rate and the mobile phase flow rate being constant, 800 rpm and 2 ml/min, respectively. Conversely, water retention was measured when the 18 solvents were the mobile phases. A direct relationship between the liquid stationary phase retention and the phase density difference was found. The liquid phase density difference is the most important parameter for stationary phase retention in a hydrodynamic CCC apparatus with coiled tubes. The chromatographic retention of formanilide was measured in biphasic systems and expressed as the formanilide partition coefficient. It is shown that the partition coefficient correlates with the Reichardt polarity index of the organic solvent when the liquid stationary phase retention volume does not.