Electron impact mass spectral fragmentation of 2a,4-disubstituted 2-chloro/2,2-dichloro-2,2a,3,4-tetrahydro-1H-azeto[2,1-d][1,5]benzothia zepin-1-ones

The mass spectrometric behaviour of nine 2a,4-disubstituted 2-chloro/2,2-dichloro-2,2a,3,4-tetrahydro-1H-azeto[2,1-d][1,5]b enzothiazepin-1-ones has been studied with the aid of mass-analysed ion kinetic energy spectrometry and accurate mass measurements under electron impact ionization. All compounds show a tendency to eliminate a neutral chlorine atom, or a chloroketene, or neutral propene, or styrene or substituted styrene molecule, plus Cl and/or H (or Cl) atom(s), to yield [M-Cl]+ ions, 2,3-dihydro-1,5-benzothiazepine derivative ions, 4,5-dihydro-5H-1,5-benzothiazepin-4-one ions which can further lose CO to give 1,4-benzothiazine ions. Both molecular ions and [M-Cl]+ ions show a tendency to eliminate an ethyl or benzyl/substituted benzyl radical to produce 2,2a-dihydro-1H-azeto[2,1-c][1,4]benzothiazin-1-one ions. The [M-Cl]+ ions could undergo rearrangement to yield 2,2a-dihydro-1H-azeto[2,1-d][1,5]benzothiazepin-1-one ions, 2,2a,3,4-tetrahydro-1H-azeto[1,2-a]quinoline ions or 1,1a,2,3-tetrahydro-azirino[2,1-d][1,5]benzothiazepine ions by loss of an ethane or a benzene/substituted benzene, a SH radical or a CO molecule. The molecular ions could also undergo rearrangement reactions to form other small fragment ions.     

A modular synthesis of annonaceous acetogenins

A synthesis of four Annonaceous acetogenins, asiminocin, asimicin, asimin, and bullanin, by a modular approach from seven fundamental subunits, A-G, is described. The approach employs a central core aldehyde segment, C, to which are appended an aliphatic terminus, A or B, a spacer subunit, D or E, and a butenolide terminus, F or G. Coupling of the A, B, D, and E segments to the core aldehyde unit is effected by highly diastereoselective additions of enantiopure allylic indium or tin reagents. The butenolide termini are attached to the ACD, BCE, or BCD intermediates by means of a Sonogashira coupling. The design of the core, spacer, and termini subunits is such that any of the C30, C10, or C4 natural acetogenins or stereoisomers thereof could be prepared. IC50 values for the four aforementioned acetogenins against H-116 human colon cancer cells were found to be in the 10(-3) to 10(-4) microM range. The IC90 activities were ca. 10(-3) microM for asimicin and asimin but only 0.1-1 microM for bullanin and asiminocin.     

Roughness induced surface acoustic resonances

The vibrational and electronic spectra of a semi-infinite crystal with a planar surface is modified in presence of surface inhomogeneities or roughness such as ridges or grooves, quantum wires or tips… Using a Green's function formalism, we present an exact numerical method for obtaining the variation of the density of states associated with the adsorption of a ridge on a flat surface or with a groove cut into an otherwise planar surface. This general method is applied to the determination of the acoustic resonances of shear horizontal polarization associated with such deterministic surface protuberances or indentations. The positions and widths of the peaks in the total or local densities of states give the frequencies and lifetimes of the resonances, which may be more or less pronounced features depending on the relative parameters of the substrate and ridge materials. We also investigate the modifications of these acoustic surface shape resonances due to the interaction between two such defects. This calculation can also be transposed to the study of electronic structure of a wire near a flat surface, in the framework of an effective mass model.     

Expedient synthesis of pseudo-Pro-containing peptides: towards constrained peptidomimetics and foldamers

The reaction of sulfonyl peptides containing L- or D-configured Ser or Thr with bis(succinimidyl) carbonate in the presence of a catalytic amount of a base affords, in solution or in the solid phase, the corresponding peptides with one or two, consecutive or alternate oxazolidin-2-ones (Oxd). The Oxd ring can be regarded to as a pseudo-Pro with an exclusively trans conformation of the preceding peptide bond; homochiral Oxd-containing peptides adopt extended conformations, while the presence of a D-configured Oxd favours folded conformations.     

Anomeric reactivity-based one-pot oligosaccharide synthesis: a rapid route to oligosaccharide libraries

The assembly of an oligosaccharide library has been achieved in a practical and efficient manner employing a' one-pot sequential approach. With the help of the anomeric reactivity values of thioglycosides, using a thioglycoside (mono- or disaccharide) with one free hydroxyl group as acceptor and donor coupled with another fully protected thioglycoside, a di- or trisaccharide is selectively formed without self-condensation and subsequently reacted in situ with an anomerically inactive glycoside (mono- or disaccharide) to form a tri- or tetrasaccharide in high overall yield. The approach enables the rapid assembly of 33 linear or branched fully protected oligosaccharides using designed building blocks. These fully protected oligosaccharides have been partially or completely deprotected to create 29 more structures to further increase the diversity of the library.     

Preparation of 1,1′-binaphthyl-2,2′-diyl bridged ansa-bis( annulated cyclopentadienyl) titanium and -zirconium dichloride complexes

The coupling of enantiomerically enriched 2,2′-dilithio-1,1′-binaphthyl with various annulated cyclopentenones or 2-indanone proves to be a facile route for the preparation of a series of annulated bis(cyclopentadienes) or bis(indenes) bridged at a symmetrical cyclopentadienyl position. The six- or seven-membered annulated bis(tetrahydroindene) 6 or bis(hexahydroazulene) 7 ligands could readily be converted to titanium or zirconium dichloride complexes. Owing to the symmetry of the ligands, only a single C₂-symmetrical isomer of the metallocene dichloride could form. Although the faces of the cyclopentadienyl moieties are homotopic, the chiral bridge enforces a chiral conformation of the metallocene complexes. The bis(indenyl) 5 or five-membered annulated bis(tetrahydropentalene) 8 ligands could not be metalated. Unbridged 2-methyl and 2-phenyl substituted tetrahydropentalenes 27 and 28 were prepared and could readily be converted to titanium dichloride complexes.     

A pH-responsive cleavage route based on a metal-organic coordination bond

The physical or chemical event that generally causes stimuli responses is limited to the formation or destruction of secondary forces, such as hydrogen bonding, hydrophobic effects, electrostatic interactions, and simple reactions. Here, pH-responsive behavior of metal-organic coordination bonding, which is intrinsic to natural systems (e.g., transferrin recycling in cells), is becoming a strong candidate for a new stimulus-responsive route. We have designed a simple pH-responsive release system by integrating a metal ion and ligand or self-assembling these species with biodegradable host molecules to form nanoparticles with "metal-ligand" or "host-metal-ligand" architectures. The cleavage of either or both the "metal-ligand" or the "host-metal" coordination bond in response to pH variations causes significant damage to the nanoparticles and the subsequent release of ligand molecules under designated pH conditions.     

Development of a high temperature treatment device for spent nuclear fuel

Novel reprocessing schemes and techniques are the focus of the Euratom FP7 project “Actinide Recycling for Separation and Transmutation” (ACSEPT), where the Paul Scherrer Institute (PSI) is represented in the pyrochemical domain. The subject of investigation is the selective separation of fission products (FPs) from spent nuclear fuel as a head-end step to either classical hydro based or pyro processes which are not yet applied on a large scale. The selective removal of FPs that are major contributors to the overall radiation dose or bear great potentials in terms of radiotoxicity (i.e. cesium or iodine), is advantageous for further processes. At PSI a device was developed to release volatile FPs by means of inductive heating. The heating up to 2,300 °C promotes the release of material that is further transported by a carrier gas stream into an inductively coupled plasma mass spectrometer for online detection. The carrier gas can be either inert (Ar) or can contain reducing or oxidizing components like hydrogen or oxygen, respectively. The development of the device by computer aided engineering approaches, the commissioning and evaluation of the device and data from first release experiments on a simulated fuel matrix are discussed.     

Synthetic cation transporters incorporating crown ethers and calixarenes as headgroups and central relays: a comparison of sodium and chloride selectivity

An earlier study showed that a calix[4]arene could function as a central relay unit to form an ion conductance pathway through a phospholipid bilayer membrane. The present study expands the range of compounds from calix[4]arene to calix[6]arene and incorporates them either as central units or as headgroups, substituting one or more diaza-18-crown-6 residues in functioning hydraphiles. Ion release was assayed by detecting either Na(+) or Cl(-) release from phospholipid vesicles. The ion transport activity for calix[4]arenes in either position is modest, but is almost non-existent when calix[6] residues were incorporated either as head groups or central relay units. The poor activity of the calix[6]arenes may result from an inability to penetrate to the midplane of the bilayer or pass entirely through it to form a conductance pathway. The transmembrane "flip-flop" may result from high polarity or steric bulk, or both. A hydraphile incorporating a single -NHCOC(6)H(4)OCH(2)CONH- as a central relay proved to be an excellent Na(+) conductor, but less selective for Cl(-). The fact that this new hydraphile molecule shows selectivity for Na (+) over Cl(-) transport and possesses two secondary amide residues in the central relay suggests a means to control ion selectivity in synthetic ion transporters.     

Automatic pre-interpretation of analytical information of GC/MS systems

Summary The procedure of using mass spectrometers as substance specific detectors for gas chromatographs often suffers from the fact that the required analytical information is not readily available from the mass spectrum. The mass spectrum contains the analytical information only in a kind of complex coding. Up to now, mass spectrometry has only been used to identify the unknown GC peaks, or to easily recognize previously known substances within the GC run. Applications in clinical or environmental chemistry, however, often require the recognition of one or more substances out of a whole group of compounds, e.g. drugs, metabolites, or poisons. This task can be performed by applying a technique which rapidly allows to classify the spectra with regard to their membership to such group of compounds. The decision whether a compound belongs to such a group or not is based on a statistical investigation of a large collection of known spectra. The basic principles of this method are discussed. Preliminary results of this method are presented, showing success rates in the range of 90–99%. The method permits to estimate the probability to be correct for a single decision. Possible applications are outlined.     

Heat capacity functions of polystyrene in glassy and in liquid amorphous state and glass transition

The heat capacity or the specific heat is for any crystalline, partially amorphous or completely amorphous substance or material a significant thermodynamic property. The glass transition may be regarded as the melting point of amorphous substances and materials, a transition property of an outstanding technical importance. A crucial point is the fact that the presence of a glass transition is an unequivocal proof of an amorphous content of a material. Furthermore, the change of the specific heat at the glass transition temperature enables the quantitative determination of the amorphicity on a relative or absolute level of any substance or material. The absolute determination of the amorphicity affords a calibration with a reference corresponding to the material under investigation. The crystallinity for this reference substance must be known from the preparation and or by any independent analytical method. The literature data for the specific heat and the glass transition of polystyrene were collected and evaluated. Data were found for the specific heat in literature from 10 to 470 K. The data were unified for each of the reported temperature in a mean value and the corresponding standard deviation was determined. An excellent conformity was found in the glassy state of polystyrene with standard deviations lower than 0.7%. The standard deviations above the glass transition were considerably higher.     

Effect of surfactants on the stability of thin liquid film flow on a rotating disk

The effect of surfactants on surface instabilities of thin liquid film flow on a rotating disk was studied at different flow rates Q (0.5相似文献   

UPS on Weinreb resin: a facile solid-phase route to aldehyde and ketone derivatives of "unnatural" amino acids and peptides

The solid-phase synthesis of "unnatural" amino aldehydes, amino ketones, peptide aldehydes, and peptide ketones was accomplished from commercially available resin in a series of room temperature reactions. The initial step involved addition of an "unnatural" side chain to the N-terminus of a benzophenone imine-activated Weinreb resin-bound amino acid or peptide derivative. The alkylated imine was hydrolyzed, and the amine was converted to the Boc-, Cbz-, or naphthoyl derivative. The resin-bound substrate was then cleaved with DIBAL-H or a Grignard reagent to give the amino aldehyde, amino ketone, peptide aldehyde, or peptide ketone products. Twenty-four reactions were carried out simultaneously using a "Billboard" reaction apparatus to give products in 27-87% (59% average) isolated yield.     

On the mechanism and kinetics of radical reactions of epoxyketones and epoxynitriles induced by titanocene chloride

The reactions of a series of epoxynitriles and epoxyketones induced by titanocene chloride have been studied. The kinetics of the decyanogenation of beta,gamma-epoxynitriles with Ti(III) corresponds to a radical reaction (k25 approximately 106 s-1), as demonstrated by competition experiments with H-transfer from 1,4-cyclohexadiene (1,4-CHD) or PhSH or conjugate addition to acrylonitrile. The 5-exo cyclization onto nitrile induced by Ti(III) is a radical reaction (k25 approximately 107 s-1) as seen in competition experiments with H-transfer from PhSH or the titanocene-water complex. The iminyl or alkoxyl radicals generated by 5-exo cyclization onto nitriles or ketones only undergo a reduction with Ti(III). This reaction overwhelms any alternative process, such as tandem cyclization onto alkenes or beta-scission. Iminyl radicals generated by 4-exo cyclizations onto nitriles undergo reduction with Ti(III) and beta-scission reaction in a ratio of 96:4 when the alpha-substituent is CN. Alkoxyl radicals from 4-exo cyclizations onto ketone carbonyls undergo reduction with Ti(III) and beta-scission in a ratio of 60:40 when the alpha-substituent is COOR. In nearly all the reactions studied, the role of Ti(III) is triple: a radical initiator (homolytic cleavage of oxirane), a Lewis acid (coordination to CN or C=O), and a terminator (reduction of iminyl or alkoxyl radicals).     

Keys for unlocking photolabile metal-containing cages

Photolabile metal-containing cages are metal complexes that undergo a change in coordination environment upon exposure to light of an appropriate wavelength. The light-responsive functionality can either be a component of the encapsulating ligand or a property of the metal complex itself. The altered coordination properties of light-responsive complexes can result in release of the coordinated metal ion into its surroundings, a differential reactivity of the metal center, or the liberation of a reactive molecule that had been passivated by binding to the metal center. These triggerable agents can be useful tools for manipulating the bioavailability of metals or their coordinating ligands in order to study biological pathways or for potential therapeutic purposes.     

What Do We Know about the Metal-Metal Bond?

Almost all main group and subgroup metals are able to form metal-metal bonds. The bond order ranges from weak interaction to a quadruple bond, and the degree of aggregation from a dinuclear entity to a three-dimensional network. In spite of numerous physicochemical studies, not all aspects of the metal-metal bond are understood. The ability of metal-metal linked polynuclear complexes to serve as a reservoir for missing or excess electrons enables them to react both with nucleophilic or reducing reagents and with electrophilic or oxidizing reagents. The intermediate position occupied by clusters between simple complexes and the bulk metal is of theoretical and practical significance.     

Detection of protease activities using specific aminoacyl or peptidyl p-nitroanilides after sodium dodecyl sulfate - polyacrylamide gel electrophoresis and its applications

A general method for detecting protease activities on acrylamide or agarose gels after sodium dodecyl sulfate - polyacrylamide gel electrophoresis (SDS-PAGE) using specific aminoacyl p-nitroanilide (NA) or peptidyl NA as substrate is described. This method is extended from the spectrophotometric assay of p-nitroaniline, which is a chromogenic product liberated by protease action on aminoacyl NA or peptidyl NA. The acrylamide gel containing protein bands was dipped directly into a solution which contained specific synthetic aminoacyl NA or peptidyl NA as a substrate or had been overlaid with an agarose gel containing the same substrate. The p-nitroaniline released on the acrylamide or agarose gel by the specific protease was diazotized with sodium nitrite and then coupled to N-(1-naphthyl)-ethylenediamine to produce distinct activity band(s). The substrates used for protease activity staining on gels were identical to those used for spectrophotometric assays. Some applications are described.     

Spreading of a fluid phase on a spherical surface

The adsorption between a liquid drop and a micro-particle in an air or an air bubble and a micro-particle in water is dominated by liquid-solid or air-solid interfacial tension and wetting area of the liquid or air on the particle surface. The wetting area is determined by the spreading of the liquid drop or the bubble on the micro-particle. To explore this spreading, a wetting model of a fluid phase on a spherical particle was built. According to the theoretical results, the contact angle is constant when a fluid phase spreads on a spherical solid surface; the micro-particle can not submerge under a fluid when only interfacial tensions are involved and the wetting is not a complete wetting. The corresponding experiments were performed to confirm the theoretical results.     

Architecturally diverse heterocycle formation by N-acyliminium ion initiated cyclization

Enaminoesters containing a tethered indole or aryl moiety on the amine react with substituted maleic anhydrides or acryloyl chlorides to provide pyrrolinone or dihydropyridone products, respectively. The indole-tethered dihydropyridones can be induced to undergo a one-pot cyclization whereas, the indole-tethered pyrrolinone intermediates are readily cyclized with HCl. The aryl-tethered pyrrolinones or dihydropyridones can be isolated and subsequently induced to cyclize with triflic acid. This methodology culminates in the synthesis of erythrane-like and other natural products that are readily amenable to combinatorial library production.     

Organic-inorganic nanohybrids through the direct tailoring of semiconductor nanocrystals with conjugated polymers

Two main synthetic strategies are used to prepare conjugated oligomer- or polymer-nanocrystal nanohybrids. In the first strategy ligand exchange is invoked to either replace with a bifunctional ligand, which contains a second functional group for coupling with conjugated oligomers or polymers (COs or CPs), or exchange for the functionalized COs or CPs in a "grafting-onto" process. Alternatively, in the second strategy the nanocrystal (NC) is passivated with functional ligands from which COs or CPs are directly grown in the absence of ligand exchange. The well-defined interface between the COs or CPs and NCs facilitates an efficient charge-transfer between them.