Tuning J-aggregate Formation and Emission Efficiency in Cationic Diazapentacenium Dyes

Enhancement of the luminescence efficiency of two new diazapentacenium salts ( D1 and D2 ) of more than 55 for D1 and 22 times for D2 ) in poor solvents, acetonitrile and/or dichloromethane, was observed and rationalized as formation of emissive J-aggregates. Both compounds displaying 4-n-decylphenyl substituents at the 7,14-carbons and phenyl ( D1 ) or 2,6-difluorophenyl ( D2 ) substituents at the quaternary nitrogen atoms in 5,12-positions have been synthetized in a two-step procedure involving a two-fold Buchwald-Hartwig-type CN cross-coupling and an electrophilic Friedel-Crafts-type cyclization. The optical properties of the dicationic diazapentacenium salts in various solvents and in thin films have been investigated by steady-state and time-resolved absorption and photoluminescence spectroscopies. In thin films and in good solvents, isolated molecules coexist with aggregates. Nonetheless, D1 is seven times more emissive than D2 , reflecting a higher J-aggregate contribution in the former.     

Aromatic and nonaromatic pyriporphyrins

Pyriporphyrins with three different orientations for the pyridine moiety have been prepared using a '3 + 1' strategy. The nonaromatic pyriporphyrins are stable so long as phenyl substituents are present at the meso-positions adjacent to the pyridine ring. An aromatic dihydropyriporphyrin with an external CO2Ph protective group has also been prepared from 2,4-pyridinedicarbaldehyde.     

Designing Cyclometalated Ruthenium(II) Complexes for Anodic Electropolymerization

The anodic electropolymerization of thiophene‐functionalized cyclometalated ruthenium(II) complexes is shown for the first time. Oxidative decomposition reactions can be overcome by modification of the involved redox potentials through the introduction of electron‐withdrawing substituents, namely nitro groups, at the cyclometalating phenyl ring. The generated functionalized ruthenium(II) complexes allow the electrochemical preparation of thin polymer films, which show a broad UV/Vis absorption as well as reversible redox switchability. The presented complexes are promising candidates for future photovoltaic applications based on photo‐redox‐active films.     

meso-Aryl-substituted subporphyrins: synthesis, structures, and large substituent effects on their electronic properties

Two synthetic methods of meso-aryl-substituted subporphyrins have been developed by means of the reaction of pyridine-tri-N-pyrrolylborane with a series of aryl aldehydes. One method relies on the condensation under Adler conditions with chloroacetic acid in refluxing 1,2-dichlorobenzene to afford subporphyrins in 1.1-3.2%, and the other is a two-step reaction consisting of the initial treatment of the two substrates with trifluoroacetic acid at 0 degrees C followed by air-oxidation in refluxing 1,2-dichlorobenzene to provide subporphyrins in up to 5.6% yield. 1H NMR studies indicate that phenyl and sterically unhindered substituents at the meso position of subporphyrins rotate rather freely even at -90 degrees C, whereas the rotation of meso-2,4,6-trimethoxyphenyl substituents is strictly prohibited even at 130 degrees C. The structures of six subporphyins have been revealed by X-ray crystallographic analysis to be all cone-shaped tripyrrolic macrocycles. Dihedral angles of meso-phenyl and sterically unhindered aryl substituents to the subporphyrinic core are rather small (38.3-55.7 degrees ) compared to those of porphyrin analogues, whereas those of meso-2,4,6-trimethoxy-substituted subporphyrins are large (68.7-75.7 degrees ). These rotational features of the meso-aryl substituents lead to their large influences on the electronic properties of subporphyrins, as seen for 4-nitrophenyl-substituted subporphyrin 14e that exhibits perturbed absorption and fluorescence spectra, depending upon solvents. Large solvent-polarity dependence of the fluorescence of 14e suggests the charge-transfer character for its excited state. Electrochemical and theoretical studies are performed to understand the electronic properties. Overall, meso-aryl-substituted subporphyrins are promising chromophores in future functional devices.     

Tetra-t-butyl magnesium phthalocyanine on gold: electronic structure and molecular orientation

In this work we have investigated the electronic structure and the molecular orientation of (t-Bu)(4)PcMg (tetra-t-butyl magnesium phthalocyanine) on polycrystalline and single crystalline gold substrates using photoemission spectroscopy and x-ray absorption spectroscopy, and we compare the results to the unsubstituted PcCu (copper phthalocyanine). The C 1s photoemission spectrum is described similar to unsubstituted relatives with an additional component for the aliphatic substituents. The variation of the excitation energy causes distinct differences in the shape of the C 1s spectrum, which is very useful for the analysis of the molecular orientation in the uppermost layer. It is shown that despite of the sterically demanding substituents, ordered sublimed films of (t-Bu)(4)PcMg are accessible, the orientation of the molecules, however, is different from the orientation of the unsubstituted relatives.     

Conformations of antipyrines

Reliable conformational energetics is essential in interpreting and predicting structures of molecular crystals. We provide a combined density functional theory (DFT)-structural database study, demonstrating that this combination can be used as a foundation for this purpose. A subtle problem of nitrogen pyramidalization is used as the example in antipyrines, a group of bioactive molecules. Nitrogen pyramidalization on the two adjacent sp(3) nitrogens directly affects the orientation of the methyl and phenyl substituents, which tend toward opposite sides of the heteroaromatic ring, affecting crystal packing. Accordingly, the overwhelming majority of the structures of antipyrines in the Cambridge Structural Database (CSD) are either nearly planar or have substituents on the opposite sides of the ring. Recent powder X-ray structures by Lemmerer et al. identified propyphenazone, an antipyrine, to have two substituents on the same side in an apparently sterically crowded conformation. We show that the new structure, although counterintuitive, is not an outlier on the conformational map. A distribution of the conformations of all antipyrines listed in the CSD is in good agreement with the computed conformational map. We also examine the role of the hysteretic property of the phenyl torsion in propyphenazone and its indirect effects on its overall conformation.     

Cobalt Triarylcorroles with Sterically Hindered Haloginated Phenyl Rings:Synthesis,Crystal Structure and Catalytic Activity for Electroreduction of Dioxygen

Three new cobalt triarylcorroles with sterically hindered haloginated phenyl rings were synthesized and characterized by UV-vis, ~1H NMR spectroscopy, mass spectrometry and electrochemistry. The compounds are represented as(Ar)3Cor Co(PPh3), where Cor is a trianion of the corrole macrocycle and Ar is a 2-Cl Ph(1), 2,6-diC l Ph(2) or 2,6-diF Ph(3) group on each of the three meso-positions. The structures of 1 and 3 were characterized in the solid state by single-crystal X-ray analysis. Rotating-disk electrode was utilized to examine the electrocatalytic activity of the corroles for reduction of O_2 in 1.0 MHClO_4. Effect of the sterically hindered meso-substituents on UV-vis spectra and redox potentials as well as the electrocatalytic activity for reduction of dioxygen was discussed.     

Organic radicals based on phenalenyl and verdazyl units

Stable phenalenyl (PLY) radicals without sterically bulky substituents need to be synthesized for application as neutral organic molecular conductors. Verdazyl radicals, which have high stability even without sterically bulky substituents, were combined with PLY radicals to produce two novel radicals. The stability of the dimethylthiourea substituted PLY radical is supported by the experimental results and quantum chemical calculations.     

Discovery of novel dyes with absorption maxima at 1.1 microm

During the process of developing organic molecules that match the wavelengths used in optical communications, we have discovered a new class of dyes, with absorption maxima at 1.1 mum, and clarified their molecular structures. The synthesis of this class of dyes was supposed to involve unexpected intramolecular tandem reactions, and the effect of alkyl substituents on such a synthesis was investigated. As a result, an effective alkyl-substituent structure for realizing a high synthetic yield and good solubility in organic solvents was found. Furthermore, thin films made of such a highly soluble dye were fabricated by solution-coating, and they exhibited a red-shifted absorption band with a maximum at approximately 1.3 mum, indicating the formation of J-like aggregates. The third-order nonlinear optical susceptibility chi(3) of these thin films at 1.3 mum, which is the wavelength used in optical communications, was measured by the Z-scan technique. The magnitude of chi(3) reaches approximately 10-7 esu. These results suggest that the solution-coated thin films of this type of dye are potential materials for optical switching at 1.3 mum and for other nonlinear optical applications.     

Supramolecular synthons on surfaces: controlling dimensionality and periodicity of tetraarylporphyrin assemblies by the interplay of cyano and alkoxy substituents

The self-assembly of three porphyrin derivatives was studied in detail on a Cu(111) substrate by means of scanning tunneling microscopy (STM). All derivatives have two 4-cyanophenyl substituents in diagonally opposed meso-positions of the porphyrin core, but differ in the nature of the other two meso-alkoxyphenyl substituents. At coverages below 0.8 monolayers, two derivatives form molecular chains, which evolve into nanoporous networks at higher coverages. The third derivative self-assembles directly into a nanoporous network without showing a one-dimensional phase. The pore-to-pore distances for the three networks depend on the size and shape of the alkoxy substituents. All observed effects are explained by 1) different steric demands of the alkoxy residues, 2) apolar (mainly dispersion) interactions between the alkoxy chains, 3) polar bonding involving both cyanophenyl and alkoxyphenyl substituents, and 4) the entropy/enthalpy balance of the network formation.     

Synthesis,characterization, and tunable semiconducting properties of aza-BODIPY derived polycyclic aromatic dyes

Azadipyrromethene derived polycyclic aromatic complexes(HBPs) containing thirteen fused rings have been synthesized,which show highly selective intense absorption in the near infrared spectrum(NIR) region with high photo-and thermo-stability.The periphery alkoxy and alkyl substituents greatly affect their molecular packing structures in thin films and their thin film transistor performances. With the simple changes of the alkyl substituents, the packing structures changed from discrete-grain with H-aggregation type absorption to lamellar packing with J-aggregation type absorption, and the semiconducting properties were modulated from p-type to interesting ambipolar-type in solution-processed organic field effect transistors(OFETs) with hole and electron mobilities reaching to 0.42 and 0.17 cm~2 V~(-1) s~(-1), respectively.     

Molecular organization in perylene tetracarboxylic di-imide solid films

The vibrational spectra of thin solid films of three perylene tetracarboxylic di-imide derivatives (phenyl, methyl, and unsubstituted) are reported. A preferred molecular orientation in the evaporated solid films emerged for all three perylene derivatives from the i.r. data. Raman spectra obtained in resonance with the absorption band were characteristic of scattering via a Herzberg—Teller mechanism.     

Lignin from sugar cane bagasse: extraction, fabrication of nanostructured films, and application

Four lignin samples were extracted from sugar cane bagasse using four different alcohols (methanol, ethanol, n-propanol, and 1-butanol) via the organosolv-CO2 supercritical pulping process. Langmuir films were characterized by surface pressure vs mean molecular area (Pi-A) isotherms to exploit information at the molecular level carrying out stability tests, cycles of compression/expansion (hysteresis), subphase temperature variations, and metallic ions dissolved into the water subphase at different concentrations. Briefly, it was observed that these lignins are relatively stable on the water surface when compared to those obtained via different extraction processes. Besides, the Pi-A isotherms are shifted to smaller molecular areas at higher subphase temperatures and to larger molecular areas when the metallic ions are dissolved into the subphase. The results are related to the formation of stable aggregates (domains) onto the water subphase by these lignins, as shown in the Pi-A isotherms. It was found as well that the most stable lignin monolayer onto the water subphase is that extracted with 1-butanol. Homogeneous Langmuir-Blodgett (LB) films of this lignin could be produced as confirmed by UV-vis absorption spectroscopy and the cumulative transfer parameter. In addition, FTIR analysis showed that this lignin LB film is structured in a way that the phenyl groups are organized preferentially parallel to the substrate surface. Further, these LB films were deposited onto gold interdigitated electrodes and ITO and applied in studies involving the detection of Cd+2 ions in aqueous solutions at low concentration levels through impedance spectroscopy and electrochemical measurements. FTIR spectroscopy was carried out before and after soaking the thin films into Cd+2 aqueous solutions, revealing a possible physical interaction between the lignin phenyl groups and the heavy metal ions. The importance of using nanostructured systems is demonstrated as well by comparing both LB and cast films.     

Synthesis and opto‐electrical properties of dendron‐containing poly(2,3‐diphenyl‐1,4‐phenylenevinylene) derivatives

A new series of poly(2,3‐diphenyl‐1,4‐phenylenevinylene) derivatives containing dendritic side groups were synthesized. Different generations of dendrons were integrated on the pendant phenyl ring to investigate their effect on optical and electrical properties of final polymers. Homopolymers can not be obtained via the Gilch polymerization because of sterically bulky dendrons. By controlling the feed ratio of different monomers during polymerization, dendron‐containing copolymers with high molecular weights were obtained. The UV–vis absorption and photoluminescent spectra of the thin films are pretty close; however, quantum efficiency is significantly enhanced with increasing the generation of dendrons. The electrochemical analysis reveals that hole‐injection is also improved by increasing dendritic generation. Double‐layer light‐emitting devices with the configuration of ITO/PEDOT:PSS/polymer/Ca/Al were fabricated. High generation dendrons bring benefit of improved device performance. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3440–3450, 2007     

Synthesis and mesomorphic properties of four ring,rod-like fluorene derivatives – the influence of the lateral substitution on mesomorphic properties of 2,7-bis(4-alkylphenyl)-fluorenes

ABSTRACT

This work presents new rod-like compounds being fluorene derivatives linked with other parts of the core at 2 and 7 positions – its synthesis and properties. The fluorene moiety is located in the central position of the four rings molecular core. The chain system in most cases was symmetrical and limited to pentyl or hexyl chains. To study the influence of the lateral substituents on mesomorphic properties two types of substituents have been incorporated, centrally located various short alkyl groups at fluorene’s 9,9 positions and outer core fluorosubstitutions located at side phenyl rings. All synthesised compounds exhibit liquid crystalline properties, where for laterally non-substituted and fluorosubstituted derivatives the dominant phases are smectics, while the nematics phases (nematic and chiral nematic – observed mostly on cooling cycle) occurs for compounds having alkyl substituents at 9,9 positions of fluorene. The synthetic methodology and mesomorphic properties of title compounds will be presented in detail as well as photophysical properties such as UV-visible absorption spectra and fluorescence spectra.     

Synthesis and properties of methoxyphenyl-substituted derivatives of indolo[3,2-b]carbazole

The synthesis and full characterization of new derivatives of indolo[3,2-b]carbazole with differently substituted phenyl groups at nitrogen atoms is reported. Comparative study on their thermal, optical electrochemical, and photoelectrical properties is presented. The synthesized compounds are electrochemically stable. Their highest occupied molecular orbital energy values range from -5.14 to -5.07 eV. The electron photoemission spectra of the films of synthesized materials revealed the ionization potentials of 5.31-5.47 eV. Hole drift mobility of the amorphous film of 5,11-bis(3-methoxyphenyl)-6-pentyl-5,11-dihydroindolo[3,2-b]carbazole exceed 10(-3) cm(2)/V·s at high electric fields, as it was established by xerographic time-of-flight technique. In contrast to diphenylamino substituted derivatives of carbazole, no effect of the position of methoxy groups on the photoelectrical properties was observed for the synthesized methoxyphenyl-substituted derivatives of indolo[3,2-b]carbazole. The indolo[3,2-b]carbazole core has a larger resonance structure that includes 3 phenyl rings, and thus the energy gap of the HOMO and LUMO π orbitals is lower as compared to that of carbazoles. With a larger energy difference between the phenyl substituents and the core moiety, the indolo[3,2-b]carbazole derivatives studied all have a weaker coupling between the phenyl group and a much weaker dependence of the molecular properties on the position of substituents on the phenyl groups as compared to those observed in substituted carbazoles.     

Structures, electronic states, photoluminescence, and carrier transport properties of 1,1-disubstituted 2,3,4,5-tetraphenylsiloles

The excellent electroluminescent (EL) properties of 1,1-disubstituted 2,3,4,5-tetraphenylsiloles, 1-methyl-1,2,3,4,5-pentaphenylsilole (MPPS), and 1,1,2,3,4,5-hexaphenylsilole (HPS) have been found. Despite some studies devoted to these materials, very little is known about the real origin of their unique EL properties. Therefore, we investigated the structures, photoluminescence (PL), and charge carrier transport properties of 1,1-disubstituted 2,3,4,5-tetraphenylsiloles as well as the effect of substituents on these characteristics. The single crystals of the three siloles involving 1,1-dimethyl-2,3,4,5-tetraphenylsilole (DMTPS), MPPS, and HPS were grown and their crystal structures were determined by X-ray diffraction. Three siloles have nonplanar molecular structures. The substituents at 1,1-positions enhance the steric hindrance and have predominant influence on the twisted degree of phenyl groups at ring carbons. This nonplanar structure reduces the intermolecular interaction and the likelihood of excimer formation, and increases PL efficiency in the solid state. The silole films show high fluorescence quantum yields (75-85%), whereas their dilute solutions exhibit a faint emission. The electronic structures of the three siloles were investigated using quantum chemical calculations. The highest occupied molecular orbitals (HOMOs) and the lowest unoccupied molecular orbitals (LUMOs) are mainly localized on the silole ring and two phenyl groups at 2,5-positions in all cases, while the LUMOs have a significant orbital density at two exocyclic Si-C bonds. The extremely theoretical studies of luminescent properties were carried out. We calculated the nonradiative decay rate of the first excited state as well as the radiative one. It is found that the faint emission of DMTPS in solutions mainly results from the huge nonradiative decay rate. In solid states, molecular packing can remarkably restrict the intramolecular rotation of the peripheral side phenyl ring, which has a large contribution to the nonradiative transition process. This explains why the 1,1-disubstituted 2,3,4,5-tetraphenylsiloles in the thin films exhibit high fluorescence quantum yields. The charge carrier mobilities of the MPPS and HPS films were measured using a transient EL technique. We obtained a mobility of 2.1 x 10(-)(6) cm(2)/V.s in the MPPS film at an electric field of 1.2 x 10(6) V/cm. This mobility is comparable to that of Alq(3), which is one of the most extensively used electron transport materials in organic light-emitting diodes (LEDs), at the same electric field. The electron mobility of the HPS film is about approximately 1.5 times higher than that of the MPPS film. To the best of our knowledge, this kind of material is one of the most excellent emissive materials that possess both high charge carrier mobility and high PL efficiency in the solid states simultaneously. The excellent EL performances of MPPS and HPS are presumably ascribed to these characteristics.     

Nitrile ylide dimerization: investigation of the carbene reactivity of nitrile ylides

A series of novel hexaaryl diazatrienes 5 ("nitrile ylide dimers") were synthesized directly from the corresponding diaryl ketimines 12 and dichlorotoluenes 13 in a facile one-pot synthesis. The carbene character of the nitrile ylides was investigated by varying the substituents on the aromatic ring adjacent to the carbene center. The isolation of the corresponding carbene dimers as stable crystalline materials with absorption maxima (lambda(max)) from 363 to 422 nm was shown to be promoted by the absence of strongly electron-withdrawing substituents. The crystal structures indicate that the E-isomers were isolated when phenyl, 3-methylphenyl, and 3-chlorophenyl substituents are present at the carbene carbon; the Z-isomer was isolated when the more sterically hindered 2,4,6-trimethylphenyl substituent (Mes) is present. The (1)H NMR spectra of the E-isomers demonstrate the nonequivalence of the aromatic rings, in which two of the aromatic rings of the imine moiety are pseudoaxial and the remaining aromatic rings are pseudoequatorial. The reactions proceed via the intermediate nitrile ylides 1 generated by the base-promoted 1,1-elimination of HCl from the intermediate chloroimine 14. The nitrile ylide was also generated by 1,3-elimination of HCl from the imidoyl chloride 18, confirming common pathways via the nitrile ylide as the dimer products obtained from these different routes were identical. The strongly electron-withdrawing 4-nitrophenyl substituent promotes the linear carbanion character of the 1,3-dipole and no dimer is formed.     

Shape‐Persistent,Sterically Crowded Star Mesogens: From Exceptional Columnar Dimer Stacks to Supermesogens

Hexasubstituted C₃‐symmetric benzenes with three oligophenylenevinylene (OPV) arms and three pyridyl or phenyl substituents are shape‐persistent star mesogens that are sterically crowded in the center. Such molecular structures possess large void spaces between their arms, which have to be filled in condensed phases. For the neat materials, this is accomplished by an exceptional formation of dimers and short‐range helical packing in columnar mesophases. The mesophase is thermodynamically stable for the pyridyl compound. Only this derivative forms filled star‐shaped supermesogens in the presence of various carboxylic acids. The latter do not arrange as dimers, but as monomers along the columnar stacks. In this liquid crystal (LC) phase, the guests are completely enclosed by the hosts. Therefore, the host can be regarded as a new LC endoreceptor, which allows the design of columnar functional structures in the future.     

Molecular orientation and liquid crystal alignment properties of new cinnamate-based photocrosslinkable polymers

Isotropic thin films of three original phenyl substituted cinnamate-based polymers, here-after referred to as 'Para', 'Meta' and 'Metamet' have been exposed to linearly polarized UV light and their photoinduced molecular orientations have been studied. The resulting photocrosslinked anisotropic polymer films were characterized using UV, conventional and polarization modulation (PM) FTIR spectroscopies. From UV and PM-IR linear dichroism measurements, at least two simultaneous orientation processes appear to play a key role in these phenyl substituted cinnamate-based systems. On the one hand, isomerization reactions deplete chromophores along the polarization direction (P) of the UV light and induce a preferential orientation of remaining 'trans'-isomers perpendicular to P; on the other hand, cycloaddition reactions lead to the formation of either head to head or head to tail photodimers aligned preferentially along P in the 'Para' and to a lesser extent in the 'Meta' and 'Metamet' systems. These last results are related to the different liquid crystal alignment properties of the films, and the influences of the chemical structure of the chromophores are discussed.