聚醋酸乙烯酯/聚丙烯酸甲酯互穿网络聚合物的研究——4.橡胶态模量和网络间的互穿缠结

 用动态粘弹谱仪测定了分步法互穿网络聚合物,聚醋酸乙烯酯/聚丙烯酸甲酯(PVAc/PMA-IPN)的橡胶态模量。实验值与从方程E_R=φ_Ⅰ^1/3·E_R,Ⅰ0+φ_ⅡE_R,Ⅱ⁰所得理论值的比较,表明网络问有明显的互穿缠结,网络Ⅰ交联程度对其的影响大于网络Ⅱ。并结合实验结果对Binder-Frisch理论中,ΔS_ent∝N_c,Ⅰ^-1·N_c,Ⅱ(-1/2)关系的合理性进行了讨论。系的合理性进行了讨论。     

高强度PAMPS-PAAm互穿网络凝胶及其溶胀性能

通过考察不同单体浓度或离子强度下凝胶的力学性能和溶胀特性,对聚2-丙烯酰胺-2-甲基丙磺酸(PAMPS)与聚丙烯酰胺(PAAm)形成的互穿网络凝胶的高强度性能和作用机理进行了研究.结果表明:PAMPS-PAAm互穿网络凝胶的力学强度对c(AMPS)存在一个最佳值(1 mol/L),且随c(AAM)的增大而显著增大(0.5～4 mol/L).当c(AMPS)=1 mol/L、c(AAM)＝4 mol/L时,互穿网络凝胶的最大抗压强度达6.46 MPa;改变凝胶体系内水的离子强度,PAMPS-PAAm凝胶在0.25 mol/kg离子强度时的抗压强度与纯水状态下相比增加了29%.     

ELECTRONIC ENERGY BAND STRUCTURE OF MOLECULAR CRYSTALS MCI·(TCNQ)_2 AND ITS RELATIONSHIP WITH THE ELECTRICAL CONDUCTION

The structure of electronic energy bands, electric charge distribution and the amount of charge transfer of molecular crystals 1-MCI·(TCNQ)_2 (Ⅰ) and 2-MCI· (TCNQ)_2 (Ⅱ) have been studied. The results are: (ⅰ) The dominant contributions to the electrical conductivities for crystals Ⅰ and Ⅱ are from TCNQ molecular columns, and the charge carriers are electrons. (ⅱ) The electrical conduction is mainly due to the hopping of charge carriers between the seats of lattice. (ⅲ) The considerable difference of the electrical conductivities between crystals Ⅰ and Ⅱ is due to the differences between (a) the concentrations of charge carriers n_(AⅠ)~C= 0.9988-|e|/cell and n_(AⅡ)~C=0.0340-|e|/cell; (b) the widths of the energy bands △E_(AⅠ)~(LU)=0.88 eV and △E_(AⅡ)~LU=0.040 eV; (c) the first derivative of E with respect to k, (dE/dk)_(K_FAⅠ)~(LU)=0.27 eV· and (dE/dk)_(K_FAⅡ)~LU=0.0048 eV·; and (d) the difference of energy barriers for the hopping of charge carriers ∈_Ⅱ-∈Ⅰ=2.5-8.8 kJ/mol.     

芳香族重氮盐氧化还原引发体系的研究——Ⅲ.芳香族重氮盐与亚铁盐氧化还原引发丙烯腈聚合过程中微量铜离子的影响

以苯重氮硼氟酸盐与亚铁盐在微量铜离子存在时能引发丙烯腈聚合,聚合速率服从:R∝[φN_2~+]~(1/2)[Fe~(++)]~(1/4)[Cu~(++)]~(1/4),氧化还原引发历程为: Fe~(++)+Cu~(++) Fe~(+++)+Cu~+ φN_2~++Cu~+→φ·+N_2+Cu~(++) φ·+M→φM·→φMM·…该历程符合上述动力学关系。但使用对硝基苯重氮硼氟酸盐时,微量铜离子对聚合反应速率影响不大,与亚铁盐浓度在一定范围呈R∝[Fe~(++)]~(1/2)的关系,因此例的引发历程为: φN_2~++Fe~(++)→φ·+N_2+Fe~(+++) φ·+M→φM·→φMM·…苯环上推电子取代基降低了重氮基的氧化势,如对位取代甲氧基、甲基或没有取代基都不能用纯亚铁盐引发丙烯腈聚合,需有微量铜盐存在才能聚合。而拉电子取代基如对位取代硝基、羧基可用纯亚铁盐引发聚合。     

铂氢化物trans-[PtH(tu)(PPh_3)_2]Cl(tu)(THF)_2(tu=SC(NH_2)_2)的结构

制得含硫脲配体的铂氢化物单晶trans-[PtH(tu)(PPh_3)_2]Cl(tu)(THF)_2,其结构测定结果为:C_(46)H_(55)N_4O_2P_2S_2ClPt M=1052.6,单斜晶系,空间群为 P2_1/c,a=12.103(1),b=21.619(3),c=20.189(4)(?),β=103.31(0)°,V=5140(2)(?)~3,Z=4,D_c=1.360g·cm~(-3),F(000)=2128,R=0.050,R_w=0.063.Pt(Ⅱ)与两个磷、一个硫脲分子的硫和一个氢相配合,形成四边形配位。     

用钛系载体催化剂进行1-丁烯聚合的研究

研制不同组分的载体钛系高效催化剂,考察在不同聚合条件及外加芳酯的情况下对1-丁烯聚合的影响。用催化剂TiCl_4,Ti(OBu)_4/φ_2SiCI_2/苯甲酸乙酯(EB)/MSCl_2/AlEt_3进行1-丁烯聚合具有高的催化活性(3.2×10~4g·PB/g·Ti·h),外加对-甲基苯甲酸乙酯时可提高聚合物等规度(Ⅰ.Ⅰ％=93.3),分子量可用H_2调节。衰减聚合反应的动力学方程为R_1=R_5+(R_0-R_5)e~(βt)。用DSC、WAXD和~(13)C-NMR等方法表征聚合物。     

阳离子型微乳液对锰(Ⅱ)-水杨基荧光酮的增敏作用

以阳离子型O/WCTMAB/n-C_5H_(11)OH/n-C_7H_(18)/H_2O微乳液为介质,进行Mn(Ⅱ)-SAF的光度法测定,ε_(575)=1.73×10~5L·mol~(-1)·cm~(-1),与以水为介质ε_(580)=6.59×10~4L·mol~(-1)·cm~(-1)及相同含量CTMABO/W胶束溶液为介质ε_(575)=1.20×10~5L·mol~(-1)·cm~(-1)比较,测定灵敏度显著增加,某些实验条件更为宽容,样品分析结果令人满意。     

两个具有松散配位的三核钼簇合物{Mo_3(μ_3—S)(μ—S)_3[S_2P(OEt)_2]_4(C_3H_3ON)}·CH_3CN(Ⅰ){Mo_3(μ_3—O)(μ—S)_3[S_2P(OEt)_2]_4(C_3H_3ON)}(Ⅱ)的合成和晶体结构

本文报道了两个具有松散配位的三核钼簇合物{Mo_3(μ_3—S)(μ—S)_3[S_2P(OEt)_2]_4·(C_3H_3ON)}·CH_3GN(Ⅰ)、{Mo_3(μ_3—O)(μ—S)_3[S_2P(OEt)_2]_4(C_3H_3ON)}(Ⅱ)的合成和晶体结构。簇合物(Ⅰ)属单斜晶系,空间群为P2_2/n,晶胞参数为a=16.579(3),b=16.959(2),c=16.867(2);β=94.44(1)°;v=4728 3;Z=4;D_c=1.778g·cm~(-3),用Patterson法解出结构,最终偏离因子R=0.045。簇合物(Ⅱ)属三斜晶系,空间群为P1,晶胞参数为a=13.175(4),b=13.372(6),c=16.656(3);α=117.87(4)°,β=60.09(3)°,γ=109.03(3)°;ν=2231 3;Z=2;D_c=1.798g·cm~(-3),用直接法解出结构,最终偏离因子R=0.066。两个簇合物均为以具有一个松散配位为特征的单帽三核簇,而且松散配位上均被一嘿唑五员环所占据,其主要差别在于簇合物(Ⅰ)的簇胳为Mo_3S_4,而簇合物(Ⅱ)则为一Mo_3OS_3·文中对这一“松散”配位的三核钼簇合物的活泼性进行了讨论。     

聚乙烯醇存在下锇(Ⅱ)-氯化亚锡-结晶紫体系超高灵敏显色反应的研究

本文研究了聚乙烯醇存在下锇(Ⅱ)-氯化亚锡-结晶紫体系的超高灵敏显色反应。反应物λ_(max)=555nm,ε_(555)=1.52×10~6L·mol~(-1)·cm~(-1)。锇含量为(0～4.8)μg/25ml时符合比尔定律。对共存离子的干扰和分离进行了实验,拟定的方法可用于矿石和一些含低品位锇物料的分析。     

[Nd_2O(C_5H_5)_6](C_12H_9N_2)3Cl·mC_4H_8O的晶体结构

本文报告用单晶X-射线衍射法测定[Nd_2O(C-5H_5)_6](C_(12)H_9N_2)_3C1·mC_4H_5O的晶体结构。晶体属于单斜晶系,空间群为P2-1/c,晶胞参数为a=20.982(15),b=11.217(7),c=32.954(32),β=104.17(7)°;Z=4。Nd和C1原子坐标用直接法定出,其他原子坐标以差Fourier方法求得,经过最小二乘法修正,R因子为0.159。在分子中三个茂环皆通过η~5。键与Nd原子配位,两个Nd原子间存在桥氧原子,因而形成(Nd_2O(C_5H_5)_6)~(2-)阴离子,Nd-C键基本上属于离子键。三个邻菲罗啉基团通过氢键与C1原子连接形成大的阳离子[(C_(12)H_9N_2)3-C1]~(2+)。     

聚醋酸乙烯酯/聚丙烯酸甲酯互穿网络聚合物的研究——1.聚合条件对体系相容性的影响

用分步法合成了聚醋酸乙烯酯/聚丙烯酸甲酯互穿网络聚合物(PVAc/PMA-IPN),PVAc和PMA的交联剂分别是丁二酸二烯丙酯(DAS),和二乙烯基苯(DVB)。当DAS用量较小时,VAc聚合时的接枝反应较明显,PVAc网络的交联密度高于化学当量的计算值。动态力学的实验结果表明,丙烯酸甲酯的聚合温度和聚合过程中的溶胶-凝胶转变对PVAc/PMA-IPN体系的相容性有很大影响。     

聚醋酸乙烯酯/聚丙烯酸甲酯互穿网络聚合物的研究——1.聚合条件对体系相容性的影响

 用分步法合成了聚醋酸乙烯酯/聚丙烯酸甲酯互穿网络聚合物(PVAc/PMA-IPN),PVAc和PMA的交联剂分别是丁二酸二烯丙酯(DAS),和二乙烯基苯(DVB)。当DAS用量较小时,VAc聚合时的接枝反应较明显,PVAc网络的交联密度高于化学当量的计算值。动态力学的实验结果表明,丙烯酸甲酯的聚合温度和聚合过程中的溶胶-凝胶转变对PVAc/PMA-IPN体系的相容性有很大影响。     

聚醋酸乙烯酯/聚丙烯酸甲酯互穿网络聚合物的研究 Ⅴ.互穿缠结对相区结构的稳定作用

用定量的甲苯溶胀聚醋酸乙烯酯/聚丙烯酸甲酯互穿网络聚合物(PVAc/PMA IPN),使体系处于分相的热力学条件;或醇解其中的PVAc 网络,即增加两组份的化学不相容性.动态力学谱和透射电镜等结果表明,IPN 和网络Ⅰ的交联密度较高的半 IPN 试样,没有发生进一步的相分离,证明网络互穿缠结是永久性的物理缠结,并且有强迫互容作用的存在.     

聚醋酸乙烯酯/聚丙烯酸甲酯互穿网络聚合物的研究——Ⅱ.强迫互容效应及形态结构

用分步法合成了交联密度不同的聚醋酸乙烯酯/聚丙烯酸甲酯互穿网络聚合物(PVAc/PMA-IPN),用DMS,TEM和SAXS等方法进行表征。发现随交联密度的增加,体系的T_g,转变由两个逐渐变为一个,清楚显示出强迫互容的贡献。模量实验值与Davies方程计算值的比较表明,所研究的IPN是一个双相连续体系,相区尺寸约为100。     

STUDIES ON ULTRASONIC GRAFTING OF POLY(VINYL ACETATE) WITH POLY(ETHYLENE OXIDE)

The ultrasonic degradation of poly(ethylene oxide) and poly(vinyl acetate) in benzene solution, and grafting reaction of poly(vinyl acetate) with poly(ethylene oxide) were studied. It is found that the chain-scission reactions follow the course suggested by D. W. Ovenall. The structure of the copolymer was identified by IR, NMR and DTA, showing that the copolymer prepared is a graft copolymer mainly. The copolymer formed by irradiating 1% PEO/PVAc solution (PEO/PVAc:1/1 by weight) for a period of 10 rain at 18.2 kHZ, with 2.0 A input current on reversed main circuit, amounts to 10.5%.     

A STUDY ON POLY (ETHYLENE OXIDE)/POLY(VINYL ACETATE)BLENDS

Melt blends of poly(ethylene oxide) (PEO) and poly(vinyl acetate (PVAc) were prepared andstudied by Torsional Pendulum Analysis (TPA) and Fourier Transform Infrared (FTIR). Two glasstransitions were found in these blends. The lower T_g corresponds to the segmental motion in thepure PEO. The dependence of the position and broadness of the higher T_g on composition of theblends indicates that the two components are compatible in the amorphous phase with micro-hetero-geneity. These T_g values observed from mixed PVAc/PEO phase are much higher than that calculatedfrom Fox equation. The comparison of the blends quenched and annealed from melt implies thatPVAc mixed with PEO at the segmental level on molten state and the deviation of T_g values fromFox equation could be due to variation of the blend's composition by crystallization of part of thePEO component. Further indication that the blends are compatible down to the level of chain segments and thatthere are specific interactions between PVAc and PEO molecules comes from the analysis of FTIRspectra of the blends and the solution of PVA in diethylene glycol dimethyl ether.     

COMPATIBILITY IN POLYMER BLENDS OF POLY (VINYL ACETATE) AND POLY (METHYL METHACRYLATE)STUDIED BY NMR

Compatibility of poly (vinyl acetate) (PVAc) with poly (methyl methacrylate) (PMMA) mixtures has been studied by using nuclear magnetic relaxation, differential scanning calorimeter and small-angle X-ray scattering techniques. The nuclear magnetic relaxation time T_1's were measured as a function of composition in blends of PMMA and PVAc prepared from chloroform solution. The results show that the system is miscible for casting from chloroform solution.     

STUDIES OF THE CRYSTALLIZATION BEHAVIOR IN THE CRYSTALLINE/AMORPHOUS POLYMER BLENDS: POLY(ETHYLENE OXIDE)/POLY(METHYL METHACRYLATE) AND POLY(ETHYLENE OXIDE)/POLY(VINYL ACETATE)

The crystallization process of poly(ethylene oxide) (PEO)/poly(methyl methacrylate) (PMMA)and PEO/poly(vinyl acetate) (PVAc) blends has been characterized by Fourier Transform Infrared(FTIR) spectra in conjunction with Differential Scanning Calorimeter (DSC) measurements. Thecrystallinity of PEO varies consistently with PEO content in PEO/PVAc blends and the PEO/PMMAblends containing 50 wt% or less PMMA. For the PEO/PMMA blends containing 60 wt% ormore PMMA, the crystallinity of PEO decreases more than PEO content but develops with crystal-lization time. These results can be explained in terms of difference between the crystallization tem-perature (T_c) and glass transition temperature (T_g) of the blends as a function of content of amorphouscomponent.     

聚氧化乙烯和聚醋酸乙烯酯在超声波辐照下接枝反应的研究

本文分别研究了聚氧化乙烯(PEO)和聚醋酸乙烯酯(PVAc) 在苯溶液中的超声波辐照降解,PEO与PVAc在苯溶液中的超声波辐照共聚反应。实验证明,降解反应可用Ovenall方程描述。用IR、NMR和DTA分析了在超声波辐照作用下PEO与PVAc在苯溶液中生成的共聚物的结构,证明所得产物主要为接枝共聚物,将浓度为1％的(PEO-PVAc)苯溶液在频率为18.2kHz、逆变器主迥路输入电流为2.0安的超声波强度下,辐照10分钟,共聚物的产率为10.54％,接枝点密度为33.3％,平均接枝链长为17。     

Effect of poly(vinyl acetate) (PVAc) on thermal behavior and mechanical properties of poly(3-hydroxybutyrate)/poly(propylene carbonate) (PHB/PPC) blends

To assess the compatibility of blends of synthetic poly(propylene carbonate) (PPC), with a natural bacterial poly(3-hydroxybutyrate) (PHB), a simple casting procedure of blend was used. poly(3-hydroxybutyrate)/poly(propylene carbonate) blends are found to be incompatible according to DSC and DMA analysis. In order to improve the compatibility and mechanical properties of PHB/PPC blends, poly(vinyl acetate) (PVAc) was added as a compatibilizer. The effects of PVAc on the thermal behavior, morphology, and mechanical properties of 70PHB/30PPC blend were investigated. The results show that the melting point and the crystallization temperature of PHB in blends decrease with the increase of PVAc content in blends, the loss factor changes from two separate peaks of 70PHB/30PPC blend to one peak of 70PHB/30PPC/12PVAc blend. It is also found that adding PVAc into 70PHB/30PPC blend can decrease the size of dispersed phase from morphology analysis. The result of tensile properties shows that PVAc can increase the tensile strength and Young’s modulus of 70PHB/30PPC blend, and both the elongation at break and the tensile toughness increase significantly with PVAc added into 70PHB/30PPC.