3-乙基-5-[α'-(3"-乙基-α"-苯并亚硒唑啉基)亚乙基]罗丹宁的电荷转移和电学性能

3-乙基-5-2-(3-乙基-乙-萃并亚硒唑啉基]亚乙基丁罗丹宁(BSeER)发生从萃并亚硒唑啉环向罗丹宁环的弱电荷转移。本文以可见吸收光谱, X射线光电子能谱和电子顺磁共振的实验结果来证明上述化合物的电荷转移, 以及通过测量伏安特性曲线, 电阻率-温度特性曲线来表征电学性能。     

3—乙基—5—[2′—(3″—乙基—2″—苯并亚硒唑啉基)亚乙基]罗丹宁的电荷转移和电学性能

3-乙基-5-[2-(3-乙基-2-苯并亚硒唑啉基)亚乙基]罗丹宁(BSeER)发生从苯并亚硒唑啉环向罗丹宁环的弱电荷转移。其表现为:随溶剂极性增加,可见区长波最大吸收峰红移;有非定域化不成对电子特征的顺磁共振信号;X射线光电子能谱得到的电子结合能偏离正常值和因光电子发射振起过程引起的双峰结构。BSeER属于p型杂质电导,电阻率随温度变化,遵守ρ=ρ_0 exp(⊿E/kT)公式。在空气和真空中的ρ和⊿E分别是:ρ100℃(空气)=7.8×10~(10)Ω·cm,⊿E)(空气)=0.45eV;ρ100℃(真空)=1.8×10~(12)Ω·cm,⊿E(真空)=0.93eV。由于弱电荷转移和由分子对形成分子柱,所以ρ很高。     

5-[5-(3-吡啶)-2H-四唑亚甲基]-2-芳酰氨基-1,3,4-噻二唑的合成

本文首先用5-(3-吡啶)-2H-四唑乙酰基酰肼与芳酰基异硫氰酸盐反应制备成化合物1-[5-(3-吡啶)-2H-四唑乙酰基]-4-芳酰氨基硫脲化合物1a～j, 然后用冰醋酸回流处理1a～j得到一系列化合物5-[5-(3-吡啶)-2H-四唑亚甲基]-2-芳酰氨基-1,3,4-噻二唑2a～j . 化合物1a～b在强碱介质中首先发生降解, 然后进行环化反应 .     

冠醚硒菁染料的合成

合成了对称和非对称两个新的冠醚硒菁染料2,2'-二乙基-45,4'5'-双并-(15-冠-5)硒碳菁碘化季铵盐和2,2'-二乙基-4,5-并-(15-冠-5)硒碳菁碘化季铵盐以用三种新的中间体2,2'-二硝基-4,5,4',5'-双并-(15-冠-5)二苯基二硒化物, 2-甲基-5,6-并-(15-冠-5)苯并硒唑和2-甲基-3-乙基-5,6-并-(15-冠-5)苯并硒碘化季铵盐。报道了它们的红外、紫外、核磁共振、质谱数据。     

内盐式O-2-(N~3-替加氟)乙基-O-(1-芳硫基-3-铵基)异丙基-硒代磷酯缀合物的合成

六乙基亚磷酰三胺依次与羟乙基替加氟、1-芳硫基甘油及硒反应,制备环甘油硒代磷替加氟缀合物(2);2再与三乙胺或三甲胺反应,完成亲核开环合成了内盐式O-2-(N3-替加氟)乙基-O-(1-芳硫基-3-铵基)异丙基-硒代磷酯缀合物.其结构经1H NMR, 31P NMR及元素分析确证.     

邻溴苯基-2-(口恶)唑啉的合成研究

改进了邻溴苯基-2-(口恶)唑啉的合成方法,使得N-(β-羟乙基)-2-(口恶)溴苯甲酰胺在氯化亚砜作用下缩合成唑啉的收率从40%左右提高到84%,并避免了使用NaH试剂,为芳基-2-(口恶)唑啉的合成提供一条方便、经济的路线.实验结果表明,反应温度对唑啉的收率的影响显著,随着反应温度的升高收率明显降低,室温下几乎得不到目标产物.根据实验结果推测其反应过程是经过互变异构酰亚胺中间物Ⅰ进行的.     

1,3,2-氧氮磷杂环戊烷衍生物(Ⅱ)——2-二乙氨基-3-取代甲酰基-1,3,2-氧氮磷杂环戊烷衍生物的合成及其性质研究

用六乙基亚磷酰胺与N-(β-羟基乙基)取代甲酰胺进行成环反应,合成了一系列新的有机磷杂环化合物,2-二乙氨基-3-取代甲酰基-1,3,2-氧氮磷杂环戊烷,然后与硫作用生成2-硫逐代衍生物,亦可不经分离一步完成上述反应。     

2-甲基-3-双取代基-4,5-二氢异噁唑衍生物的合成及其拆分

3-(1′,2′-二-O-环己叉二氧乙基)异噁唑啉盐(2)与MeMgBr(或在二异丙基胺和正丁基锂存在下与乙酸乙酯)进行亲核加成反应合成了2,3-二甲基-3-(1′,2′-二-O-环己叉二氧乙基)-4,5-二氢异噁唑(3)[或2-甲基-3-(乙氧羰甲基)-3-(1′,2′-二-O-环己叉二氧乙基)-4,5-二氢异噁唑(4)]。3和4经MPLC拆分得到了非对映体3a,3b,4a和4b,其结构经1HNMR,13C-NMR,IR和元素分析表征。     

三稠环系三唑磷茂啉的化学 II. 2-苯基-3-N,N-二烷基氨基苯并噻唑并[2,3,d]-2,3-二氢-1,2,4,3-三唑磷茂啉与酚和醇的反应

本文通过2-苯基-3-N,N-二烷基氨基苯噻唑并[2,3,d]-2,3-二氢-1,2,4,3-三唑磷茂啉(1)与酚和醇的反应合成了三稠环系三唑磷茂啉的两个新的系列化合物2a～2f和3a～3j.测定了这十六个新磷杂环化合物的IR, ^3^1P, ^1^3C和^1H NMR以及2a的MS和X-ray数据,初步解析了它们的结构。     

酰氨基硫脲及其相关杂环衍生物的研究II.1-[5-(α-萘)-2H-四唑-2-乙酰[-4-苯基氨基硫脲及其相关环衍生物的合成

本文合成了1-[5-(α-萘)-2-H-四唑2-乙酰]-4-苯基氨基硫脲5,以及由5衍生的环化产物3-[5-(α-萘)-2H-四唑2-甲撑]-4-苯基-1,2,4-三咪啉-5-硫酮6,2-苯胺基-5-[5-(α-萘)-2H-四唑-2-甲撑]-1,3,4-噻二唑7及2-苯胺基-5-[5-(α-萘)-2H-四唑-2-甲撑]-1,3,4-二唑8.它们的结构均通过元素分析,红外光谱,核磁共振及质谱鉴定.其药理实验正在进行中.初步实验表明,5及6对小麦生长有较强的促进作用.     

Detection of Intermediate during Electrochemical Polymerization of Azure A and X‐ray Photoelectron Spectroscopy of Poly(azure A)

The electrochemical polymerization of azure A has been investigated by the rotating ring‐disk electrode (RRDE) and the X‐ray photoelectron spectroscopy (XPS). The electrolysis of azure A was studied in the pH region of 1.0 and 12.0. The results from the RRDE experiments show that the electrochemical polymerization of azure A was performed by two steps, i.e., oxidation of azure A and followed by polymerization. The intermediates generated at the disk were detected at the ring electrode in the ring potential region of ?0.2–0.20 V (vs. Ag/AgCl reference electrode). The collection efficiencies of the intermediates increase with decreasing the ring potential as well as increasing the rotation rate of the RRDE. Thus, the intermediate is to carry a positive charge species and not too stable. The results from the XPS experiments show that the anions can be doped into poly(azure A) film and be dedoped from it during oxidation and reduction processes.     

Studies of degradation behaviors of poly (3‐hexylthiophene) layers by X‐ray photoelectron spectroscopy

Degradation behaviors of poly(3‐hexylthiophene‐2,5‐diyl) (P3HT) layers on NiO in the presence of H₂O at ambient pressure and dark conditions were studied using X‐ray photoelectron spectroscopy (XPS). Upon H₂O exposure at 120 °C, partial oxidation of P3HT together with molecular water incorporation, but with the maintained local ring‐structure, were deduced by XPS. Valence band spectra of XPS evidenced that the partial oxidation of P3HT local structure could alter π‐conjugation systems of P3HT layers, forming additional electronic states close to its original highest occupied molecular orbital. For comparison, P3HT surface was also exposed to O₂, and no change in the S 2p and C 1s spectra was found by O₂ exposure at 120 °C, implying that H₂O plays a major role at the initial stage of P3HT oxidation. Copyright © 2014 John Wiley & Sons, Ltd.     

取代苄基五甲氧羰基环戊二烯的合成和晶体结构

五甲氧羰基环戊二烯基钾和取代苄基卤化物反应, 合成了七个新型苄基取代五甲氧羰基环戊二烯。由^1H NMR、IR、元素分析等确认R(苄基)和环戊二烯上碳直接相连, 具有典型的碳碳连结。对产物之一, 1-萘亚甲基五甲氧羰基环戊二烯的X射线衍射测定, 进一步肯定了上述结论。化合物为单斜晶系, 空间群为P2/n, a=0.9731(1), b=1.7403(3), c=1.465(3)nm; β=95.70(1)^°, v=2.4712nm^3, D~c=1.334g/cm^3, 最终的R=0.093, 萘亚甲基环与环戊二烯基环的二面角为68.19^°。     

A Facile Route to Boronic Acid Functional Polymeric Microspheres via Epoxide Ring Opening

Boronic acid‐functionalized microspheres are prepared for the first time via mild epoxide ring opening based on porous cross‐linked polymeric microspheres (diameter ≈ 10 μm, porosity ≈ 1000 Å). Quantitative chemical analysis by XPS and EA evidences that there is a greater functionalization with boronic acid when employing a sequential synthetic method [1.7 atom% boron (XPS); 1.12 wt% nitrogen (EA)] versus a one‐pot synthetic method [0.2 atom% boron (XPS); 0.60 wt% nitrogen (EA)] yielding grafting densities ranging from approximately 2.5 molecules of boronic acid per nm² to 1 molecule of boronic acid per nm², respectively. Furthermore, the boronic acid‐functionalized microspheres are conjugated with a novel fluorescent glucose molecule demonstrating a homogeneous spatial distribution of boronic acid.     

The effect of nonmetallic element P in electroless Ni‐P coating on the passivation process during chemical conversion treatment

Pure Ni and electroless Ni‐P coating (ENPC) were passivated by a chemical conversion treatment. The passive films formed on pure Ni and ENPCs (with content of P 2.9, 7.2 and 11.7 at.% respectively) were analyzed by X‐ray photoelectron spectroscopy (XPS). High‐resolution XPS was also used to analyze the chemical states of the elements detected in the passive films. The results indicated that the detected Ni and P were in elemental states, and no compound with Ni and P element was detected in passive film, meaning that Ni and P did not participate in the formation of the passive film. The content of film‐forming reaction product in passive film increases with the content of element P in Ni‐P coating, suggesting that the nonmetallic P in Ni‐P coating played an important role in the formation of the passive film. The XPS results were used to analyze the formation mechanism of the passive film. Copyright © 2014 John Wiley & Sons, Ltd.     

Photo-oxidation and ozonization of poly(3-hexylthiophene) thin films as studied by UV/VIS and photoelectron spectroscopy

The kinetics and the mechanisms of degradation of thin P3HT layers have been investigated quantitatively for ozonization and photo-oxidation. Both, decay kinetics and product evolution of the polymer degradation are monitored by in situ UV/VIS and X-ray photoelectron spectroscopy (XPS). The degradation pathways of ozonization and photo-oxidation of P3HT turn out to be significantly different. Ozone attacks the thiophene units mainly by direct addition to the double bonds, leading to the loss of UV/VIS absorption, while the aliphatic side chains [1] are hardly affected. During photo-oxidation, the polymer is primarily attacked at the alkyl side chain which leads to the formation of reactive peroxide species. These subsequently cause the oxidation of sulfur and concomitantly the destruction of the thiophene ring, resulting in the loss of absorption. From the kinetics of the blue shift of the optical absorption it is concluded that the polymer is mainly attacked at the terminal thiophene rings the case of photo-oxidation whereas ozone attacks positions more or less randomly distributed along the chain. The rate of photo-oxidation under AM 1.5 conditions is at least one order of magnitude faster than the decomposition of P3HT by ozone.     

Local structure of nitrogen atoms in a porphine ring of mesophenyl substituted porphyrin with an electron-withdrawing group using X-ray photoelectron spectroscopy and X-ray absorption spectroscopy.

This study investigated the protonation of nitrogen atoms in porphyrins with meso-phenyl p-substituted by an electron-withdrawing group using N 1s X-ray photoelectron spectroscopy (XPS), the N K X-ray absorption near-edge structure (XANES), and the discrete variational (DV)-Xalpha molecular orbital (MO) method. Both tetraphenylporphyrin (TPP) and tetrakis(p-sulfonatophenyl)porphyrin (TSPP) have a single structure: the former has two protonated and two non-protonated N atoms in the porphine ring; the latter has four protonated N atoms in the porphine ring. In contrast, a combination of XPS, XANES, and DV-Xalpha MO calculations shows that tetrakis(p-carboxyphenyl)porphyrin (TCPP) has a dual structure: one structure has two protonated and two non-protonated N atoms; the other has four protonated N atoms. Furthermore, this result was also considered based on the protonation constants of N atoms in the porphyrins. The correlation between the strength of electron-withdrawing groups and protonation to N atoms in porphyrins can be described using the spectral patterns of the N 1s XPS and N K XANES spectra.     

聚次甲基蓝膜的生长及性质

在铂电极和金电极上,次甲基蓝在低电位 0～－ 0.5 V范围内的氧化还原已有报导,它在 － 0.2 V处有可逆的氧化还原峰 [1,2].近来,已将次甲基蓝的氧化升高至 1.2 V（ vs Ag/AgCl参比电极）, 在玻炭电极上形成一层聚合物膜 [3],这种聚合物可被用来固定葡萄糖氧化酶制成葡萄糖生物传感器 [3].在扫描电位为－ 0.6～ 1.0 V（ vs SCE）范围内, 聚次甲基蓝膜的生长已通过电化学石英晶体微天平技术得到了证实,同时证实了,在氧化还原过程中阴离子能够在聚次甲基蓝膜中掺杂和去掺杂 [4].聚次甲基蓝在 pH为 2.0至 8.0范围内具有很好的电化学…     

α-亚甲基-γ-丁内酰胺衍生物的合成进展

α-亚甲基-γ-丁内酰胺衍生物具有细胞毒性、抗肿瘤等生理活性, 有关这些化合物的合成方法一直是人们感兴趣的课题之一。本文拟就(1)含必要官能团的开链前体的成环反应, (2)现成的γ-丁内酰胺的α-亚甲基化反应等两个方面对α-亚甲基-γ-丁内酰胺的合成方法进行综述。     

Synthesis of new materials based on polythiophenes substituted with mesogen groups

A new family of conjugated polymers formed by 3-alkyloximethylthiophenes substituted with a biphenyl group was synthesised by a route involving first the coupling of a functionalised alkyl chain, from 8 to 12 carbon atoms, to 3-methanolthiophene, and then the attachment of the mesogen group. The monomer was characterised by conventional techniques, and thermal studies were also achieved. The polymerisation of these units was carried out via oxidative polymerisation with FeCl₃. The resultant polymers were characterised by FT-IR, elemental microanalysis and XPS. Subsequently, these materials were doped with I₂ and characterised by the above techniques and conductivity measurements, which indicated that these materials are in the semiconductor range. The polymerisation of these monomers was also carried out via electrochemical methods, and it was found that, together with the oxidation of the thiophene ring, the oxidation of the biphenyl group is also produced, for which an over-oxidised material is obtained, as demonstrated by XPS analysis and theoretical calculations.