Can glycans unveil the origin of glycoprotein hormones? - human chorionic gonadotrophin as an example -

Doping with (glyco)protein hormones represent an extremely challenging, analytical problem as nearly all are constitutively present at low concentrations that fluctuate according to circadian or alternative periodical, or external stimuli. Thus the mere concentration in a biological sample is only resolutive when this surpasses extreme values. As the vast majority of these molecules are produced by recombinant DNA technology it is believed that the exogenous molecules could bear the signature of the host cell. In particular, these could comprise structural differences originated from co or post-translational differences. In this study we have employed both proteomics and glycomics strategies to compare recombinant and urinary human chorionic gonadotrophin in order to evaluate this hypothesis. As anticipated the recombinant hormone could be shown to contain N-glycolyl neuraminic acid, a sialic acid that cannot be produced by humans. Furthermore, differences were observed in the overall glycosylation, in particular the presence of abundant hybrid-type glycans that were much less pronounced in the recombinant species. These differences were determined to occur predominantly in the alpha-subunit for which antidoping strategies focussed on these elements could be used for both chorionic gonadotrophin and lutrophin as they share the same alpha-subunit.     

Ionometallurgy: designer redox properties for metal processing

The first electrochemical series in a deep eutectic solvent (DES) is described. Speciation resulting from the unusual chemistry of the choline chloride based DES is used to explain both similarities and differences from aqueous media. We give examples of how these differences can be exploited in technologically important systems.     

Investigating quantitation of phosphorylation using MALDI-TOF mass spectrometry

Despite advances in methods and instrumentation for analysis of phosphopeptides using mass spectrometry, it is still difficult to quantify the extent of phosphorylation of a substrate because of physiochemical differences between unphosphorylated and phosphorylated peptides. Here we report experiments to investigate those differences using MALDI-TOF mass spectrometry for a set of synthetic peptides by creating calibration curves of known input ratios of peptides/phosphopeptides and analyzing their resulting signal intensity ratios. These calibration curves reveal subtleties in sequence-dependent differences for relative desorption/ionization efficiencies that cannot be seen from single-point calibrations. We found that the behaviors were reproducible with a variability of 5-10% for observed phosphopeptide signal. Although these data allow us to begin addressing the issues related to modeling these properties and predicting relative signal strengths for other peptide sequences, it is clear that this behavior is highly complex and needs to be further explored.     

Polarized Raman Spectra VIII. Ramam Intensities of Anthracene Excited by Different Laser Light

An Ar-Kr ion laser was used to excite the Raman spectrum of powdered anthracene with two laser lines of 4880 and 6471 Å. There are significant differences in the intensity distribution in these two Raman spectra. These differences can be best explained by considering that Raman intensities are contributed by two allowed excited states of anthracene, and their contributions depend upon the laser frequency. From these Raman spectra, it is also possible to infer the vibrational structures in the higher energy, structureless excited state of anthracene.     

Structures and energetics of base flipping of the thymine dimer depend on DNA sequence

The cis,syn-cyclobutane pyrimidine dimer (CPD) is a photoinduced DNA lesion leading to a significant distortion of the DNA structure. Its repair by DNA photolyase requires a flip of the damaged base into an extrahelical position. This base flip is expected to be sequence-dependent, but the structures and energetics as a function of the bases 3' and 5' to the CPD lesion are unknown. Eight-nanosecond MD simulations of four different hexadecamer duplexes with the CPD were performed for the flipped-in and flipped-out structures. Analysis of these results indicates clear sequence-dependent differences. Significant disruptions of the base pairs to the 3' side of the CPD are observed for the flipped-out structures with adjacent A-T pairs, whereas those with G-C pairs adjacent show no such distortions. The conformational spaces occupied by these two duplexes are significantly different. The structural differences correlate well with the free energy differences for base flipping calculated using the previously established 2D potential of mean force (PMF) method. The energy differences for base flipping in duplexes containing A, T, G, and C pairs adjacent to the CPD were found to be 6.25-6.5, 5.25-5.5, 7.25-7.5, and 6.5-6.75 kcal/mol, respectively. These energy differences of up to 2 kcal/mol should be large enough to be detected experimentally using sensitive probes.     

The determination of ring junction stereochemistry in steroids using mass-analysed ion kinetic energy spectrometry

The unimolecular mass-analysed ion kinetic energy (MIKE) spectra of 9 pairs of hydrocarbon and ketone steroid isomers, differing only in the stereochemistry at the A/B and C/D ring junctions, have been measured and are discussed with a view to unambiguous structural identification. Reproducible differences in the MIKE spectra are observed, which are large enough in certain instances to suggest that MIKE spectrometry may be used for determining the stereochemistry of the A/B and C/D ring junctions in steroidal isomers, even if the second isomer is not available. This fortunate situation is rarely observed in conventional mass spectrometry of stereoisomeric steroids. Furthermore, these differences in the MIKE spectra may be correlated with differences in strain energy between configurational isomers. The sensitivity of MIKE spectrometry to differences in strain energies makes it a potentially powerful stereochemical probe.     

Double layer effects on metal nucleation in deep eutectic solvents

The electrodeposition of zinc has been studied in two deep eutectic solvents. Unlike the metals studied to date in these liquids, zinc electrodeposition is not mass transport limited and the morphology of the deposit differs in the two liquids. This study shows that changing the concentration of solute affects the physical properties of the liquid to different extents although this is found to not effect the morphology of the metal deposited. EXAFS was used to show that the speciation of zinc was the same in both liquids. Double layer capacitance studies showed differences between the two liquids and these are proposed to be due to the adsorption of a species on the electrode which is thought to be chloride. The differences in zinc morphology is attributed to blocking of certain crystal faces leading to deposition of small platelet shaped crystals in the glycol based liquid.     

A thermogravimetric study of acidic and basic solutes in two molten alkali metal nitrate eutectics

The reaction of ten oxyanions and oxides, acting as Lux—Flood acids have been studied in both lithium nitrate—potassium nitrate and sodium nitrate—potassium nitrate eutectics and the stoichiometries of the reactions established. A series of acids arranged in order of decreasing strength has been drawn up, which is very similar for both eutetic solvents.Five Lux—Flood bases have also been studied in these two solvents. Sodium carbonate proved to be very stable to 500°C. Sodium peroxide revealed significant differences in stability and solubility in the two solvents, while lithium, sodium and potassium hydroxides showed differences in the two melts and also considerable differences between each other, suggesting that little cation exchange takes place in these solutions.     

Conditions of use for sealed cobalt 60 sources

Conditions of use specifications define suitable operating environments for sealed radioactive sources. There are minor differences between manufacturer’s specifications. The basis for these differences is explored and the results of recent water quality surveillance presented. It is concluded that the specifications are readily achievable and that gamma irradiation continues to be a safe and reliable technology.     

Crazing as quasifracture in an oriented viscoelastic medium

Crazes of different types occur in polymeric systems. Long, sparse crazes develop in less oriented molecular systems, while fine, short, dense crazes occur in highly oriented molecular systems. Different crazing mechanisms and different models may have to be studied for a better understanding of these differences. However, in this report, using one model and one theory, an analysis has been made of the differences in the geometry of craze development. By emphasizing the mechanism of molecular orientation, it is found that the basic differences are essentially attributable to the variation of the anisotropy of the material system as a result of large deformation rather than to any fundamental differences in the crazing mechanism.     

The emulsion copolymerization of styrene and sodium styrene sulfonate

The emulsion copolymerization of styrene and sodium styrene sulfonate has been shown to be a feasible preparative route to ionomeric sulfonated polystyrene. The properties of these copolymers are reported elsewhere. The copolymerization rate was found to be dramatically enhanced when compared to that for the emulsion copolymerization of styrene under identical conditions. This copolymerization was studied in detail and two mechanisms were proposed to account for these rate differences. An increase in the number of polymerizing particles in the copolymerization with consequent rate enhancement was substantiated by electron microscopy. However, the data indicate that the rate differences cannot be fully accounted for by this effect. In addition, a gel effect is proposed as a second contributor to the enhanced rate. This gel effect is believed to result from the intermolecular association of the incorporated metal sulfonate units in the growing polymer particles. When a third monomer that plasticizes the ionic interactions is used the polymerization rate decreases. This supports the gel effect hypothesis.     

On the importance of spectral responsivity of Robertson-Berger-type ultraviolet radiometers for long-term observations

A system to determine the spectral responsivity of ultraviolet (UV) radiometers has been developed and is routinely operated at the Central Ultraviolet Calibration Facility, at the National Oceanic and Atmospheric Administration. The instrument and the measurement methodologies are described. Results of measurements from thermally controlled broadband UV radiometers of the Robertson-Berger (R-B)-type are described. Systematic differences in the spectral response curves for these instruments have been detected. The effect of these differences on the field operation of UV-B radiometers has been studied by calculating the instrumental response from modeled UV spectra. The differences of the weighted spectral UV irradiances, measured by two radiometers with different spectral response functions, caused by the daily variation in the position of the sun were estimated for fixed values of total ozone, altitude and albedo, and for cloud-free conditions. These differences increase with the solar zenith angle and are as large as 8%. Larger differences in the instrumental response may be produced by ozone variations. Thus, care must be taken when analyzing data from R-B radiometers and comparing results from different instruments. Routine cycling of UV-B radiometers in operative networks without a careful determination of the spectral responsivity, or small drifts of the spectral responsivity, may strongly affect the accuracy of UV radiation measurements and produce an erroneous trend. Because of the possible differences among radiometers, it would not be practical to derive the long-term behavior of UV radiation without routine and thorough characterization of the spectral responsivities of the instruments.     

Nanomaterial characterization: considerations and needs for hazard assessment and safety evaluation

Nanotechnology is a rapidly emerging field of great interest and promise. As new materials are developed and commercialized, hazard information also needs to be generated to reassure regulators, workers, and consumers that these materials can be used safely. The biological properties of nanomaterials are closely tied to the physical characteristics, including size, shape, dissolution rate, agglomeration state, and surface chemistry, to name a few. Furthermore, these properties can be altered by the medium used to suspend or disperse these water-insoluble particles. However, the current toxicology literature lacks much of the characterization information that allows toxicologists and regulators to develop “rules of thumb” that could be used to assess potential hazards. To effectively develop these rules, toxicologists need to know the characteristics of the particle that interacts with the biological system. This void leaves the scientific community with no options other than to evaluate all materials for all potential hazards. Lack of characterization could also lead to different laboratories reporting discordant results on seemingly the same test material because of subtle differences in the particle or differences in the dispersion medium used that resulted in altered properties and toxicity of the particle. For these reasons, good characterization using a minimal characterization data set should accompany and be required of all scientific publications on nanomaterials.     

Separation of rat pituitary secretory granules by continuous flow electrophoresis

The separation of growth hormone-containing cytoplasmic secretory granules from the rat pituitary gland by continuous flow electrophoresis is described. The results are consistent with the hypothesis that granule subpopulations can be separated due to differences in surface charge; these, in turn, may be related to the oligomeric state of the hormone.     

Contact angle of polyethylene on copper and its effect on adhesion

To determine whether the large differences in adhesion for polyethylene coatings applied to different types of copper surface could be attributed to changes in work of adhesion or wettability, the variations of contact angle with time has been measured for molten polyethylene droplets on these surfaces. It is concluded from these measurements that the low peel strengths obtained on certain substrates cannot be accounted for by a low work of adhesion of poor wetting of the surface.     

激光打印机墨粉的热重分析

应用热重分析方法对21种激光打印机用墨粉样品作了热失重研究。在氮气气氛中,分别对21种样品用TA 2050型热重分析仪在静态恒温及动态升温条件下的热稳定性及热解曲线的差异作了比较。在整个静态恒温条件的分析过程中,21个样品的失重在0.60%～1.16%之间,多数在1%左右。从动态升温的热失重数据及其热解曲线可见,各种墨粉之间存在较明显的差异,例如在曲线上呈现单个或多个失重台阶,失重的温度和温度区间的不同以及趋于恒重状态的温度和残重的不同等。据此认为热重分析可以为鉴别不同牌号的墨粉提供依据,而且还可对墨粉的组分作出初步判别。     

Surface structure and roughness of Nickel-Titanium wires

Nickel-Titanium wires not only show the well known shape memory effect, but also pseudoelastic behaviour. This means, as the material is bent in a wide range of tension, the stress in the material stays constant. This special behaviour allows the improvement of orthodontic devices. The investigation of wires for this application reveals great differences in the surface roughness of the wires from various suppliers. The roughness causes a loss of spring energy for the orthodontic wire by frictional effects. The investigation of the mechanical behaviour of these materials leeds to differences compared with the ideal behaviour expected for the stress/strain curve. Obviously these differences are caused by surface effects of the wires. To evaluate these questions intensive roughness measurements with profilometry, laser spectroscopy and scanning force microscopy have been performed. Further more defined bending and tensile experiments have been carried out and corresponding roughness and structure analysis with the scanning force microscope has been taken into account. By etching the wires significant surface effects could be found.     

Surface structure and roughness of Nickel-Titanium wires

Nickel-Titanium wires not only show the well known shape memory effect, but also pseudoelastic behaviour. This means, as the material is bent in a wide range of tension, the stress in the material stays constant. This special behaviour allows the improvement of orthodontic devices. The investigation of wires for this application reveals great differences in the surface roughness of the wires from various suppliers. The roughness causes a loss of spring energy for the orthodontic wire by frictional effects. The investigation of the mechanical behaviour of these materials leeds to differences compared with the ideal behaviour expected for the stress/strain curve. Obviously these differences are caused by surface effects of the wires. To evaluate these questions intensive roughness measurements with profilometry, laser spectroscopy and scanning force microscopy have been performed. Further more defined bending and tensile experiments have been carried out and corresponding roughness and structure analysis with the scanning force microscope has been taken into account. By etching the wires significant surface effects could be found.     

Synthesis and conformational properties of 2,6-bis-anilino-3-nitropyridines

The synthesis of 2,6-bis-anilino-3-nitropyridines that are alkylated or acylated at the anilino nitrogen atoms is described. These derivatives show characteristic differences in the 1H-NMR spectra compared with the unsubstituted parent compound. These differences are used to determine structure-conformation relationships of this type of compounds. The conclusions drawn from the 1H-NMR spectra in this respect are supported by X-ray crystallographic data and by 1H-NMR data of conformationally restricted analogues. Preliminary investigations indicate that these relationships can in principle be extended to other diarylamines.     

Active site comparison of CoII blue and green nitrite reductases

Copper-containing nitrite reductases (NiRs) possess type 1 (T1) and type 2 (T2) copper sites and can be either green or blue in color owing to differences at their T1 centers. The active sites of a green and a blue NiR were studied by utilizing their T1CuI/T2CoII and T1CoII/T2CoII-substituted forms. The UV/Vis spectra of these derivatives highlight the similarity of the T2 centers in these enzymes and that T1 site differences are also present in the CoII forms. The paramagnetic NMR spectra of T1CuI/T2CoII enzymes allow hyperfine shifted resonances from the three T2 His ligands to be assigned: these exhibit remarkably similar positions in the spectra of both NiRs, emphasizing the homology of the T2 centers. The addition of nitrite results in subtle alterations in the paramagnetic NMR spectra of the T1CuI/T2CoII forms at pH<7, which indicate a geometry change upon the binding of substrate. Shifted resonances from all of the T1 site ligands have been assigned and the CoII--N(His) interactions are alike, whereas the CbetaH proton resonances of the Cys ligand exhibit subtle chemical shift differences in the blue and green NiRs. The strength of the axial CoII--S(Met) interaction is similar in the two NiRs studied, but the altered conformation of the side chain of this ligand results in a dramatically different chemical shift pattern for the CgammaH protons. This indicates an alteration in the bonding of the axial ligand in these derivatives, which could be influential in the CuII proteins.