Study on enantiomeric separation of basic drugs by NACE in methanol‐based medium using erythromycin lactobionate as a chiral selector

A wide variety of chiral selectors have been employed in CZE, and among them macrocyclic antibiotics including glycopeptides, ansamycins, aminoglycosides and polypeptides exhibited prominent enantioselective properties toward abundant racemic compounds. Compared with CZE, the use of macrocyclic antibiotics as chiral selectors in NACE has not been reported previously. In this study, an approach to the enantioseparation of basic drugs by means of NACE with erythromycin lactobionate (EL) belonging to the group of macrolide antibiotics has been investigated. Especially different from the above four classes of antibiotics, there are no reports concerned with the use of macrolides which belong to macrocyclic antibiotics as chiral selectors in CE. In this work EL is first used as a chiral selector in NACE for the enantiomeric separations of two racemic basic drugs that possess high separability consisting of propranolol and duloxetine. Furthermore, EL possesses advantages such as high solubility and low viscosity in the solvent and very weak UV absorption. The chiral separations were achieved using Tris‐boric acid as the BGE and methanol as the organic medium. In the course of this work we observed that both migration time and enantioseparation were influenced by several parameters such as the pH and composition of the BGE, EL concentration, capillary temperature and applied voltage. Consequently, these parameters were systematically optimized in order to obtain the optimum enantioseparations.     

Chiral amines as reagents for HPLC-MS enantioseparation of chiral carboxylic acids

Mass spectrometry (MS) has become a popular analytical technique because of its high sensitivity and specificity. Therefore, the use of a chiral derivatization reagent for the MS detection seems to be efficient for the enantiomeric separation of racemates. However, the number of chiral reagents for the liquid chromatography (LC)-tandem mass spectrometry (MS/MS) analysis is very limited. The applicability of commercially available chiral amines as the derivatization reagents for the enantiomeric separation of chiral carboxylic acids is reported in this paper by using non-steroidal anti-inflammatory drugs (NSAIDs), i.e. ibuprofen, flurbiprofen, and loxoprofen. The efficiency of the chiral reagents was evaluated in terms of tagging easiness, separation by reversed-phase chromatography, and detection sensitivity by electrospray ionization (ESI)-MS/MS. Among the tested eight chiral amines, i.e. (R)-(+)-4-(3-aminopyrrolidin-1-yl)-7-(N,N-dimethylaminosulfonyl)-2,1,3-benzoxadiazole (DBD-APy), (S)-(+)-1-(2-pyrrolidinylmethyl)-pyrrolidine (PMP), L-prolinamide, (3R)-(-)-1-benzyl-3-aminopyrrolidine, (S)-(+)-1-cyclohexyl-ethylamine, (3R)-(+)-3-(trifluoroacetamido)-pyrrolidine (TFAP), (R)-(-)-1-aminoindan (AI), and (S)-(+)-tetrahydrofurfuryl-amine, DBD-APy, PMP, AI, and TFAP could be used as the chiral reagents for the enantiomeric separation of the NSAIDs. The Rs values and the detection limits of the derivatives were in the range of 1.29-3.85 and 0.57-0.96 fmol, respectively. These four reagents were applied for the determination of the NSAIDs in rat plasma.     

Phosphomolybdic acid supported on silica gel and promoted with alkali metal ions as catalysts for the esterification of acetic acid by ethanol

Different ratios of phosphomolybdic acid PMA supported on silica gel (1–30 wt%) and promoted with alkali metal hydroxide have been prepared by an impregnation method and calcinated at 350 °C for 4 h. The catalysts were characterized by thermogravimetry (TG), differential thermal analysis (DTA), X-ray diffraction, FT-IR spectroscopy and N₂ adsorption measurements. The surface acidity and basicity of the catalysts were determined by adsorption of pyridine and the dehydration–dehydrogenation of 2-propanol. The gas-phase esterification of acetic acid by ethanol was carried out in a conventional flow bed reactor. The results clearly revealed that among the PMA loading, the use of 10 wt% catalyst showed maximum yield of ethyl acetate. This catalyst also improved on addition of Na or K-hydroxide. These results were correlated with the structure and the acid–base properties of the prepared catalysts.     

Preparative enantioseparation of propafenone by counter‐current chromatography using di‐n‐butyl l‐tartrate combined with boric acid as the chiral selector

This paper extends the research of the utilization of borate coordination complexes in chiral separation by counter‐current chromatography (CCC). Racemic propafenone was successfully enantioseparated by CCC with di‐n‐butyl l ‐tartrate combined with boric acid as the chiral selector. The two‐phase solvent system was composed of chloroform/ 0.05 mol/L acetate buffer pH 3.4 containing 0.10 mol/L boric acid (1:1, v/v), in which 0.10 mol/L di‐n‐butyl l ‐tartrate was added in the organic phase. The influence of factors in the enantioseparation of propafenone were investigated and optimized. A total of 92 mg of racemic propafenone was completely enantioseparated using high‐speed CCC in a single run, yielding 40–42 mg of (R)‐ and (S)‐propafenone enantiomers with an HPLC purity over 90–95%. The recovery for propafenone enantiomers from fractions of CCC was in the range of 85–90%.     

Chemical studies on the reactions of synthetic 1.13-nm-tobermorite with alkali metal hydroxides at room temperature

Summary The reaction of alkali metal hydroxides (MOH;M=Li, Na, K;c=0.02–1.0M) with synthetic 1.13-nm-tobermorite (Ca₅Si₆H₂O₁₈·4H₂O) at 25±2°C was studied. The results obtained indicate that the reactivity highly depends onpH and cation field strength and to lesser degree on the ionic radius ofM. MOH has negative effects on the crystallinity of the concerned phase in the following order: KOH > NaOH > LiOH. Furthermore, the hydroxides cause swelling of crystals, attributable to the creation of new cavities due to partial hydrolysis of tetrahedral SiO₂(OH)₂ chains in the lattice. Hydrolysisvia cleavage of Si-O-Si bonds facilitates the cation exchange process Ca²⁺ M ⁺ which probably proceeds by a nucleophilic substitution reaction (S_N2). The observed different affinities of 1.13-nm-tobermorite towardsMOH could be used for the separation of these cations.

---

Chemische Untersuchung der Reaktion von synthetischem 1.13-nm-Tobermorit mit Alkalimetallhydroxiden bei Raumtemperatur

Zusammenfassung Die Reaktion von Alkalimetallhydroxiden (MOH;M=Li, Na, K;c=0.02–0.1M) mit synthetischem 1.13-nm-Tobermorit (Ca₅Si₆H₂O₁₈·4H₂O) wurde bei 25±2°C untersucht. Die Ergebnisse zeigen, daß die Reaktivität stark vompH-Wert und von der Kationenfeldstärke, hingegen weniger vom Ionenradius des verwendeten Alkalimetalls abhängt.MOH wirkt sich in der Reihenfolge KOH > NaOH > LiOH negativ auf die Kristallinität der betroffenen Phasen aus. Darüber hinaus verursachen Hydroxide eine Schwellung der Kristalle, ausgelöst durch die Erzeugung neuer Hohlräume durch partielle Hydrolyse tetraedrischer SiO₂(OH)₂-Ketten im Kristallgitter. Hydrolyse der Si-O-Si-Bindungen erleichtert den Kationenaustauschprozeß zwischenM ⁺ und Ca²⁺, welcher wahrscheinlich über einen S_N2-Mechanismus verläuft. Die beobachteten Unterschiede in der Reaktivität zwischenMOH und 1.13-nm-Tobermorit eröffnen eine Möglichkeit zur Trennung dieser Kationen.

     

Enantioseparation of phenothiazines in CD-modified CZE using single isomer sulfated CD as a chiral selector

Enantioseparations of five chiral phenothiazines in CD-modified CZE using the single isomer sulfate-substituted beta-CD (heptakis(2,3-dihydroxy-6-O-sulfo)-beta-CD, SI-S-beta-CD) and dual CD systems consisting of SI-S-beta-CD and a neutral CD as chiral selectors in a citrate buffer at pH 3.0 were investigated. The results indicate that SI-S-beta-CD is an excellent chiral selector for enantioseparation of promethazine. The enantiomers of trimeprazine were well separated, while those of ethopropazine could also be baseline-resolved with SI-S-beta-CD. With dual CD systems, especially with hydroxypropyl-beta-CD (HP-beta-CD) as neutral CD, the enantioselectivity of thioridazine and ethopropazine was considerably enhanced. Effective enantioseparation of phenothiazines, except for methotrimeprazine, could thus be favorably and simultaneously achieved. Moreover, reversal of the enantiomer migration order of ethopropazine and thioridazine occurred by varying the concentration of gamma-CD in the presence of SI-S-beta-CD. These phenomena may be attributable to the opposite effects of sulfated beta-CD and gamma-CD on the mobility of the enantiomers of ethopropazine and of thioridazine. Comparative studies on the enantioseparations of phenothiazines with single CD and dual CD systems containing SI-S-beta-CD and randomly sulfate-substituted beta-CD (MI-S-beta-CD) were made.     

CDMPC手性固定相对新型金属簇化合物的手性拆分

应用纤维素三（3,5-二甲基苯基氨基甲酸酯）（cellulose tris (3, 5- dimethylphenylcarbamate,CDMPC）手性固定相对两种新型金属簇合物进行了拆分,通过流动相组成、流速和样品溶剂等条件对拆分影响的考察进行了拆分条件的优化。实验结果表明,簇合物1和簇合物2分别在含乙醇V(hexane)∶V(ethanol)=95∶5)和异丙醇(V(hexane)∶V(2-propanol)=90∶10)的流动相中得到了较好的拆分,将样品溶解在和流动相组成相近的溶剂中更利于簇合物拆分,簇合物配体结构对簇合物在固定相上的保留和拆分有重要的影响。 在优化条件下,2种金属簇合物分离度均达到1.5以上。     

Fast electrophoretic separation of sulfur- and selenium-containig amino acid enantiomers with vancomycin as a chiral selector in coated capillaries

Baseline separation of the enantiomers of the negatively charged 6-aminoquinolyl-N-hydroxysuccinimidyl carbamate (AQC) derivatives of cystine, methionine, ethionine, and their seleno analogs can be achieved in 3–5 min with capillary electrophoresis in polyacrylamide coated capillaries and submillimolar concentrations of vancomycin as the chiral selector. In addition to the vancomycin concentration, the separation is affected by the type, concentration and pH of the buffer. Good buffers are more suitable than phosphate buffer. At pH values above the isoelectric point of vancomycin the mobility difference between the enantiomers becomes smaller. This effect is larger than would be expected from the reversal of the vancomycin migration alone.     

Ion chromatography with the indirect ultraviolet detection of alkali metal ions and ammonium using imidazolium ionic liquid as ultraviolet absorption reagent and eluent

Indirect ultraviolet detection was conducted in ultraviolet‐absorption‐agent‐added mobile phase to complete the detection of the absence of ultraviolet absorption functional group in analytes. Compared with precolumn derivatization or postcolumn derivatization, this method can be widely used, has the advantages of simple operation and good linear relationship. Chromatographic separation of Li⁺, Na⁺, K⁺, and NH₄⁺ was performed on a carboxylic acid base cation exchange column using imidazolium ionic liquid/acid/organic solvent as the mobile phase, in which imidazolium ionic liquids acted as ultraviolet absorption reagent and eluting agent. The retention behaviors of four kinds of cations are discussed, and the mechanism of separation and detection are described. The main factors influencing the separation and detection were the background ultraviolet absorption reagent and the concentration of hydrogen ion in the ion chromatography‐indirect ultraviolet detection. The successful separation and detection of Li⁺, Na⁺, K⁺, and NH₄⁺ within 13 min was achieved using the selected chromatographic conditions, and the detection limits (S/N = 3) were 0.02, 0.11, 0.30, and 0.06 mg/L, respectively. A new separation and analysis method of alkali metal ions and ammonium by ion chromatography with indirect ultraviolet detection method was developed, and the application range of ionic liquid was expanded.     

Isosteric heats of adsorption of carbon dioxide on zeolite MCM-22 modified by alkali metal cations

Adsorption isotherms of carbon dioxide were measured on cation-exchanged (Li⁺, Na⁺, K⁺, Cs⁺) MCM-22 zeolite with the molar ratio of Si/Al=15 and series of Na-MCM-22 of Si/Al molar ratios varying in the range from 15 to 40 at 273, 293, 313 and 333 K. Based on the known temperature dependence of CO₂ adsorption, isosteric heats of adsorption were calculated. The obtained dependences of isosteric heats related to the amount of CO₂ adsorbed have provided detailed insight into the interaction of carbon dioxide molecule with alkali metal cations.     

Thermodynamics of aqueous solutions of the alkali metal sulfates

The available thermodynamic properties for aqueous solutions of each of the alkali metal sulfates have been combined and analyzed within the framework of the ion interaction model at temperatures up to 225°C. It was necessary to set ₁ equal to 1.4kg^1/2-mol^–1/2 in order to obtain a satisfactory fit. The temperature dependence of the ion interaction parameters was given the functional form used by Rogers and Pitzer⁽¹⁾ in their study of Na₂SO₄(aq). With few exceptions, it was possible to reproduce the available thermodynamic data for aqueous solutions of the alkali metal to within the estimated experimental error. Thermodynamic results for Na₂SO₄(aq) appear to be adequate in this temperature range, but enthalpy and heat capacity data for the other alkali metal sulfate solutions are conspicuously lacking. Activity coefficients of these electrolytes decreased to less than 0.1 at moderate molalities at the higher temperatures, and their order changed with increasing temperature; two results which could be due to a combination of hydration and association effects.Research sponsored by the Division of Chemical Sciences, Office of Basic Energy Sciences of the U.S. Department of Energy under contract DE-AC05-840R21400 with the Martin Marietta Energy Systems, Inc.     

Stability evaluation of alkali metal standard solutions by using precise ion chromatography

Mass fractions of alkali metal (Li, Na, K, Rb, Cs) standard solutions (1000 mg/kg) were measured with about 0.1% relative standard deviation by improving the method of injection in ion chromatography (IC). This technique was applied to stability testing of the standard solutions. After storage of each alkali metal standard solution for 18 months, an increase of the mass fraction was observed, for all the alkali metal ions, of approximately 0.15% per year at 25 °C and approximately 0.02% per year at 5 °C. The observed increase of the mass fraction can be explained by the weight loss of the solution during storage. The deviation between the mass fraction measured by IC and the preparation mass fraction after correcting the weight loss for solvent evaporation was within ±0.05% for every alkali metal ion. It is concluded that alkali metal standard solutions of 1000 mg/kg are basically stable for more than 18 months under these storage conditions and that correction for evaporation is effective if weight monitoring of each bottle is performed precisely. Presented at BERM-11, October 2007, Tsukuba, Japan.     

Reaction of primary phosphines with elemental sulfur and alkali metal hydroxides (MOH, M = Na, K, Cs): a novel and facile three-component synthesis of trithiophosphonates

Primary phosphines readily react with elemental sulfur and alkali metal hydroxides (MOH, M = Na, K, Cs) in the molar ratio 1:3:2 under mild conditions (70 °C, 0.5 h, ethanol) to afford alkali metal trithiophosphonates in good to high yields (72-90%).     

Preliminary studies of supercritical-fluid chromatography on porous graphitic carbon with methylated cyclodextrin as chiral selector

Summary Dimethylated-β-cyclodextrins dynamically adsorbed on porous graphitic carbon have been used as chiral selectors in chiral supercritical-(or subcritical-) fluid chromatography. The kinetics of adsorption and desorption were studied with CO₂-methanol+dimethylated-β-cyclodextrins and CO₂-methanol as mobile phases. The system was proved to be stable and reproducible and to afford rapid enantiomer separations especially when performed with 95:5 CO₂-methanol+dimethylated-β-cyclodextrin as mobile phase. The versatility of the chiral system enabled the use of a variety of chiral selectors. It was found that enantiomer separation can vary largely as a function of the composition of commercial dimethylated-β-cyclodextrin mixture.     

Impact of amines as co-modifiers on the enantioseparation of various amino acid derivatives on a tert-butyl carbamoylated quinine-based chiral stationary phase

A tert-butyl carbamoylated quinine-based chiral stationary phase (CSP) for direct enantiomer separation of various natural and unnatural amino acid derivatives was studied. The influence of functional groups in the amino acid side chains upon the enantioseparation is discussed with the aim of realizing contributions to their overall chiral recognition. The effects of various amines as co-modifiers upon retention and overall enantioselectivity of amino acid derivatives in polar organic solvents was systematically investigated. In general, retention times decreased with increasing amine concentrations without a distinct alteration of enantioselectivity. All analytes were rapidly resolved on the CSP with the methanol-based mobile phase containing 87 mM acetic acid and 7 mM triethylamine.     

Enantioseparation of nuarimol by affinity electrokinetic chromatography-partial filling technique using human serum albumin as chiral selector

The present paper deals with the enantiomeric separation of nuarimol enantiomers by affinity EKC-partial filling technique using HSA as chiral selector. Firstly, a study of nuarimol interactions with HSA by CE-frontal analysis was performed. The binding parameters obtained for the first site of interaction were n(1) = 0.84; K(1) = 9.7 +/- 0.3x10(3 )M(-1) and the protein binding percentage of nuarimol at physiological concentration of HSA was 75.2 +/- 0.2%. Due to the moderate affinity of nuarimol towards HSA the possibility of using this protein as chiral selector for the separation of nuarimol using the partial filling technique was evaluated. A multivariate optimization approach of the most critical experimental variables in enantioresolution, running pH, HSA concentration and plug length was carried out. Separation of nuarimol enantiomers was obtained under the following selected conditions: electrophoretic buffer composed of 50 mM Tris at pH 7.3; 160 muM HSA solution applied at 50 mbar for 156 s as chiral selector; nuarimol solutions in the range of 2-8x10(-4) M injected hydrodynamically at 30 mbar for 2 s and the electrophoretic runs performed at 30 degrees C applying 15 kV voltage. Resolution, accuracy, reproducibility speed and cost of the proposed method make it suitable for quality control of the enantiomeric composition of nuarimol in formulations and for further toxicological studies. The results showed a different affinity between nuarimol enantiomers towards HSA.     

不同预处理方法对准东高碱煤中碱金属含量测定的影响

以四种不同的准东高碱煤及气化飞灰为研究对象,对高碱煤及气化飞灰中碱金属(Na、K)的赋存形态,以及不同预处理方法(低温灰化法、直接消解法、中国国标法、萃取法及氧弹燃烧法)对准东高碱煤及气化飞灰中碱金属(Na、K)含量测定的影响进行了测试分析。结果表明,准东高碱煤中碱金属Na主要以水溶态形式存在,碱金属K主要以水不溶态形式存在;不同的预处理方法对准东高碱煤中碱金属(Na、K)含量的测定结果影响显著,对于准东高碱煤及气化飞灰中碱金属(Na、K)含量测定,建议采用氧弹燃烧法,萃取法也可以相对准确地反映煤中碱金属Na的含量。     

Conductance study of the complexation of substituted and lariat 16-crown-5 derivatives with alkali metal ions in nonaqueous solvents

Formation constants (K _ML) of 1:1 complexes of 15-(2,5-dioxahexyl)-15-methyl-16-crown-5 (L16C5) and 15,15-dimethyl-16-crown-5 (DM16C5) with alkali metal ions were determined in acetonitrile (AN) and propylene carbonate (PC) by conductometry at 25°C. Except for the case of Li⁺-and K⁺-16C5 complexes in PC, the selectivity sequences of L16C5 and DM16C5 are identical with those of the parent crown ether 16-crown-5 (16C5) regardless of the solvent (AN, PC, methanol) (Na¹ > Li⁺ > K⁺ > Rb⁺ > Cs⁺), which show the size-fit correlation. The selectivities of L16C5 and DM16C5 for the alkali metal ions are governed not by the sidearms but by the cavity size. The stability of the crown ether complex is dependent not on the dielectric constant but largely on the donor number of the solvent. TheK _ML(M₁ ⁺)/K _ML(M₂ ⁺) ratio of L16C5 or 16C5 varies very much with the solvent in the cases of M₁=Na, M₂=K and M₁=Na, M₂=Li, but that of DM16C5 is almost constant regardless of the solvent.     

Enhancement of enantioselectivity in chiral capillary electrophoresis using hydroxypropyl‐beta‐cyclodextrin as chiral selector under molecular crowding conditions induced by dextran or dextrin

Molecular crowding is a new approach to enhance the retention properties and selectivity of molecularly imprinted polymers. In this work, this concept was first applied to chiral CE to enhance its enantioselectivity. A model system, enantioseparation of salbutamol using hydroxypropyl‐beta‐cyclodextrin as chiral selector in the presence of dextran or dextrin as crowding‐inducing agents, was chosen to demonstrate its potency. Some parameters, especially the concentration of crowding‐inducing agents and cyclodextrins were investigated intensively. Moreover, based on fluorescence spectroscopy and affinity CE, it was found that the presence of crowding‐inducing agents could promote the association of enantiomers with cyclodextrins and intensify the interacting differences of two enantiomers with cyclodextrins. As a result, the essential concentration of cyclodextrins to make the enantiomers reach baseline separation was significantly decreased with the aid of molecular crowding. This study shows that molecular crowding is an effective strategy to enhance the enantioselectivity of cyclodextrin in chiral CE.