Preparation of high-quality colloidal mask for nanosphere lithography by a combination of air/water interface self-assembly and solvent vapor annealing

Nanosphere lithography (NSL) has been regarded as an inexpensive, inherently parallel, high-throughput, materials-general approach to the fabrication of nanoparticle arrays. However, the order of the resulting nanoparticle array is essentially dependent on the quality of the colloidal monolayer mask. Furthermore, the lateral feature size of the nanoparticles created using NSL is coupled with the diameter of the colloidal spheres, which makes it inconvenient for studying the size-dependent properties of nanoparticles. In this work, we demonstrate a facile approach to the fabrication of a large-area, transferrable, high-quality latex colloidal mask for nanosphere lithography. The approach is based on a combination of the air/water interface self-assembly method and the solvent-vapor-annealing technique. It enables the fabrication of colloidal masks with a higher crystalline integrity compared to those produced by other strategies. By manipulating the diameter of the colloidal spheres and precisely tuning the solvent-vapor-annealing process, flexible control of the size, shape, and spacing of the interstice in a colloidal mask can be realized, which may facilitate the broad use of NSL in studying the size-, shape-, and period-dependent optical, magnetic, electronic, and catalytic properties of nanomaterials.     

Plasmonic films based on colloidal lithography

This paper reviews recent advances in the field of plasmonic films fabricated by colloidal lithography. Compared with conventional lithography techniques such as electron beam lithography and focused ion beam lithography, the unconventional colloidal lithography technique with advantages of low-cost and high-throughput has made the fabrication process more efficient, and moreover brought out novel films that show remarkable surface plasmon features. These plasmonic films include those with nanohole arrays, nanovoid arrays and nanoshell arrays with precisely controlled shapes, sizes, and spacing. Based on these novel nanostructures, optical and sensing performances can be greatly enhanced. The introduction of colloidal lithography provides not only efficient fabrication processes but also plasmonic films with unique nanostructures, which are difficult to be fabricated by conventional lithography techniques.     

Synthesis of hematite (alpha-Fe2O3) nanorods: diameter-size and shape effects on their applications in magnetism, lithium ion battery, and gas sensors

We demonstrated in this paper the shape-controlled synthesis of hematite (alpha-Fe(2)O(3)) nanostructures with a gradient in the diameters (from less than 20 nm to larger than 300 nm) and surface areas (from 5.9 to 52.3 m(2)/g) through an improved synthetic strategy by adopting a high concentration of inorganic salts and high temperature in the synthesis systems to influence the final products of hematite nanostructures. The benefits of the present work also stem from the first report on the <20-nm-diameter and porous hematite nanorods, as well as a new facile strategy to the less-than-20-nm nanorods, because the less-than-20-nm diameter size meets the vital size domain for magnetization properties in hematite. Note that the porous and nonporous hematite one-dimensional nanostructures with diameter gradients give us the first opportunity to investigate the Morin temperature evolution of nanorod diameter and porosity. Evidently, the magnetic properties for nanorods exhibit differences compared with those for the spherical particle counterparts. Hematite nanorods are strongly dependent on their diameter size and porosity, where the magnetization is not sensitive to the size evolution from submicron particles to the 60-90 nm nanorods, while the magnetic properties change significantly in the case of <20 nm. In other words, for the magnetic properties of nanorods, in a comparable size range, the porous existence could also influence the magnetic behavior. Moreover, applications in formaldehyde (HCHO) gas sensors and lithium batteries for the hematite nanostructures with the diameter/surface area gradient reveal that the performance of electrochemical and gas-sensor properties strongly depends on the diameter size and Brunauer-Emmett-Teller (BET) surface areas, which is consistent with the crystalline point of view. Thus, this work not only provides the first example of the fabrication of hematite nanostructure sensors for detecting HCHO gas, but also reveals that the surface area or diameter size of hematite nanorods can also influence the lithium intercalation performances. These results give us a guideline for the study of the size-dependent properties for functional materials as well as further applications for magnetic materials, lithium-ion batteries, and gas sensors.     

Calixarene-encapsulated nanoparticles: self-assembly into functional nanomaterials

Calixarenes are excellent surfactants for enhancing the dispersion and self-assembly of metal nanoparticles into well-defined structures, particularly those with unit length scales in the 10-100 nm size range. Particles within these ensembles are strongly coupled, giving rise to unique collective optical or magnetic properties. The self-assembled nanostructures described in this feature article include 2D arrays of colloidal Au nanoparticles with size-dependent plasmonic responses, and sub-100 nm Co nanoparticle rings with chiral magnetic states. These nanoparticle assemblies may be further developed for applications in chemical sensing based on surface-enhanced Raman scattering (SERS) and as binary elements for nonvolatile memory, respectively.     

大长径比有序多孔阳极氧化铝模板的制备及用于镍纳米线阵列

报道一种恒电流二次氧化制备大长径比(>1000)阳极氧化铝(AAO)模板的方法,研究氧化时间和氧化电流密度分别对制备的AAO模板的表面形貌、孔径大小、厚度等的影响.结果表明,AAO模板的表面形貌及厚度n受m氧、厚化度电约流为密2度00及μ氧m、化长时径间比的为影10响0;-当13氧00化的电高流质密量度A为AO8模m板A·.c采m用-2电时化,氧学化沉1积8方h能法在制制备备出的孔A径A为O模15板0-的20孔0中成功制备了Ni纳米线阵列,分别用扫描电镜(SEM)、高分辨透射电镜(HRTEM)、X射线衍射(XRD)和X射线能量散射光谱(EDS)对其进行了表征;结果显示,制备的Ni纳米线排列整齐有序,每根Ni纳米线直径几乎相同,约150nm,长度约为180-200μm,长径比为1200-1300,与AAO模板的参数一致.研究了Ni纳米线阵列的长径比对其磁性能的影响,发现大长径比的Ni纳米线阵列具有明显的磁各向异性,而长径比约为200的Ni纳米线阵列未表现出明显的磁各向异性.本文结果表明,恒电流二次氧化方法能制备大长径比的AAO模板,并能用于制备大长径比的一维纳米材料阵列,可望在制备具有特殊光学、磁学等性能材料方面得到应用.     

Fabrication of 3D metal dot arrays by geometrically structured dynamic shadowing lithography

Sphere lithography (SL), sometimes erroneously generalized as nanosphere lithography (NSL), stands out as a versatile technique capable of producing 2D periodic micro- and nanostructures with general materials applicability, flexible size and shape control, high throughput, and elegance of simplicity. Many of the fundamental aspects of the features produced by SL have been investigated in a systematic manner, including the optical, magnetic, electronic, and catalytic behaviors with emphasis toward applications in biosensing, ultrasensitive spectroscopy, and nanodevice fabrication. Previous work has primarily focused on two-dimensional patterning, however, with little attention paid to vertical growth of the SL features. In this work, the 3D structural evolution of metal dot arrays at two different length scales was demonstrated by SL-based geometrically structured dynamic shadowing lithography (GSDSL). An empirically derived model of structural growth is also developed to predict the shape and size of the features in this system.     

Macroscopic arrays of magnetic nanostructures from self-assembled nanosphere templates

We have extended the widely used technique of nanosphere lithography to produce nanosphere templates with significantly improved long-range order. Single, ordered domains stretching over areas greater than 1 cm2 have been achieved by assembling spheres with the correct surface chemistry on a water/air interface. Self-assembly over macroscopic areas is facilitated by a combination of electrostatic and capillary forces. The presented technique is easily implemented, and the assembled monolayers can be transferred onto almost any surface, thus making the procedure applicable to a broad range of nanoscale research. We demonstrate this through the fabrication of hexagonally ordered, macroscopic arrays of magnetic nanostructures with modified magnetic properties.     

Fabrication of micro-lens arrays built in photosensitive hybrid films by UV-cured imprinting technique

Photosensitive TiO₂-contained organic–inorganic hybrid films were prepared by combining a low-temperature sol–gel process with a spin-coating technique. Optical properties and photochemical activities of the as-prepared hybrid sol–gel films were characterized by prism coupling technique, thermal gravimetric analysis, UV–Visible spectroscopy, and Fourier transform infrared spectroscopy. Advantages for fabrication of micro-lens arrays based on the as-prepared photosensitive hybrid films were demonstrated by a direct-contact lithography technique and a reflow technique, followed by an UV-cured imprinting technique. Results indicate that the as-prepared photosensitive hybrid materials have great applicability for the fabrication of photonic components. Micro-sphere lens arrays and micro-ellipsoid lens arrays with the diameter from 20 to 100 μm and built in the as-prepared hybrid films were obtained. Morphological and surface profile properties of the as-fabricated micro-lens arrays were characterized by scanning electron microscopy and surface profiler, respectively. Results indicate that the fabrication process of the micro-lens arrays is a simple, cost-effective and mass production process, and the as-prepared photosensitive hybrid materials have great potential applications for the fabrication of the micro-optical elements.     

Directed positioning of single cells in microwells fabricated by scanning probe lithography and wet etching methods

Scanning probe microscopy has emerged as a powerful technique for mapping the surface morphology of biological specimens, including proteins and cells. In addition to providing measurements of topographic images, it enables the fabrication of micro-/nanostructures with a high spatial resolution. Herein, we demonstrate a simple and reliable method for the preparation of single Escherichia coli bacterial cell arrays using pre-fabricated microwell structures. Using a <100>-oriented silicon substrate, microwell arrays with inclined sidewalls were fabricated by scanning probe lithography and sequential chemical wet etching. The trapping efficiency of single cells was optimized by controlling the geometries of the microwells. These data suggest that single-cell arrays may be applicable in a variety of areas, including drug testing and toxicology, as well as basic cell biology.     

Novel patterns by focused ion beam guided anodization

Focused ion beam patterning is a powerful technique for guiding the growth of ordered hexagonal porous anodic alumina. This study shows that, with the guidance of the focused ion beam patterning, hexagonal porous anodic alumina with interpore distances from 200 to 425 nm can be fabricated at 140 V in 0.3 M phosphoric acid. When the interpore distance is increased to 500 nm, alternating diameter nanopore arrays are synthesized with the creation and growth of new small pores at the junctions of three large neighboring pores. Moreover, alternating diameter nanopore arrays in hexagonal arrangement are fabricated by focused ion beam patterning guided anodization. Interpore distance is an important parameter affecting the arrangement of alternating diameter nanopore arrays. Different types of novel patterns are obtained by designing different focused ion beam concave arrays. The fundamental understanding of the process is discussed.     

Redox-transmetalation process as a generalized synthetic strategy for core-shell magnetic nanoparticles

Although multicomponent core-shell type nanomaterials are one of the highly desired structural motifs due to their simultaneous multifunctionalities, the fabrication strategy for such nanostructures is still in a primitive stage. Here, we present a redox-transmetalation process that is effective as a general protocol for the fabrication of high quality and well-defined core-shell type bimetallic nanoparticles on the sub-10 nm scale. Various core-shell type nanomaterials including Co@Au, Co@Pd, Co@Pt, and Co@Cu nanoparticles are fabricated via transmetalation reactions. Compared to conventional sequential reduction strategies, this transmetalation process has several advantages for the fabrication of core-shell type nanoparticles: (i) no additional reducing agent is needed and (ii) spontaneous shell layer deposition occurs on top of the core nanoparticle surface and thus prevents self-nucleation of secondarily added metals. We also demonstrate the versatility of these core-shell structures by transferring Co@Au nanoparticles from an organic phase to an aqueous phase via a surface modification process. The nanostructures, magnetic properties, and reaction byproducts of these core-shell nanoparticles are spectroscopically characterized and identified, in part, to confirm the chemical process that promotes the core-shell structure formation.     

In-depth profile analysis of filled alumina and titania nanostructured templates by radiofrequency glow discharge coupled to optical emission spectrometry

The development of highly ordered and self-assembled magnetic nanostructures such as arrays of Fe or Ni nanowires and their alloys is arousing increasing interest due to the peculiar magnetic properties of such materials at the nanoscale. These nanostructures can be fabricated using nanoporous anodic alumina membranes or self-assembled nanotubular titanium dioxide as templates. The chemical characterization of the nanostructured layers is of great importance to assist the optimization of the filling procedure or to determine their manufacturing quality. Radiofrequency glow discharge (RF-GD) coupled to optical emission spectrometry (OES) is a powerful tool for the direct analysis of either conducting or insulating materials and to carry out depth profile analysis of thin layers by multi-matrix calibration procedures. Thus, the capability of RF-GD-OES is investigated here for the in-depth quantitative analysis of self-aligned titania nanotubes and self-ordered nanoporous alumina filled with arrays of metallic and magnetic nanowires obtained using the template-assisted filling method. The samples analysed in this work consisted of arrays of Ni nanowires with different lengths (from 1.2 up to 5 μm) and multilayer nanowires of alternating layers with different thicknesses (of 1–2 μm) of Ni and Au, or Au and FeNi alloy, deposited inside the alumina and titania membranes. Results, compared with other techniques such as scanning electron microscopy and energy-dispersive X-ray spectroscopy, show that the RF-GD-OES surface analysis technique proves to be adequate and promising for this challenging application.     

Biomimetic antireflective hierarchical arrays

We report a simple method for the fabrication of biomimetic antireflective hierarchical arrays based on the combination of self-assembled polymer spheres and nanoimprint lithography (NIL). The hierarchical structures are fabricated by creating nanopillars on the microscale round protrusion arrays, which are similar to natural mosquito eyes consisting of combined micro- and nanostructures. The hierarchical arrays dramatically suppress the surface reflection from visible to near-infrared regions with an angle of incidence of up to 70°.     

Deep-UV surface-enhanced resonance Raman scattering of adenine on aluminum nanoparticle arrays

We report the ultrasensitive detection of adenine using deep-UV surface-enhanced resonance Raman scattering on aluminum nanostructures. Well-defined Al nanoparticle arrays fabricated over large areas using extreme-UV interference lithography exhibited sharp and tunable plasmon resonances in the UV and deep-UV wavelength ranges. Theoretical modeling based on the finite-difference time-domain method was used to understand the near-field and far-field optical properties of the nanoparticle arrays. Raman measurements were performed on adenine molecules coated uniformly on the Al nanoparticle arrays at a laser excitation wavelength of 257.2 nm. With this technique, less than 10 amol of label-free adenine molecules could be detected reproducibly in real time. Zeptomole (~30,000 molecules) detection sensitivity was readily achieved proving that deep-UV surface-enhanced resonance Raman scattering is an extremely sensitive tool for the detection of biomolecules.     

柔软的球状和长方体状氧化硅中空结构的制备研究

采用自组装形成的芘纳米结构作为模板,成功地制备了柔软的球状和长方体状氧化硅中空结构.当不同量的芘在十六烷基三甲基溴化铵(CTAB)溶液中自组装时,产生的自组装结构展现出明显的从球状到长方体状的形貌变化.这些结构被用作氧化硅前驱体溶胶-凝胶反应的模板,获得了球状和长方体状氧化硅/芘复合结构.通过乙醇除去模板后,生成了柔软的球状(直径约为400nm)和长方体状(长为0.5—2.5μm)的氧化硅中空结构.这些结果展现了采用有机纳米结构作为模板来合成无机中空结构的优势:合成简便、结构多样以及结构形貌的灵活可控.     

Fabrication and optical characterization of imaging fiber-based nanoarrays

In this paper, we present a technique for fabricating arrays containing a density at least 90 times higher than previously published. Specifically, we discuss the fabrication of two imaging fiber-based nanoarrays, one with 700 nm features, another with 300 nm features. With arrays containing up to 4.5 × 10⁶ array elements/mm², these nanoarrays have an ultra-high packing density. A straightforward etching protocol is used to create nanowells into which beads can be deposited. These beads comprise the sensing elements of the nanoarray. Deposition of the nanobeads into the nanowells using two techniques is described. The surface characteristics of the etched arrays are examined with atomic force microscopy and scanning electron microscopy. Fluorescence microscopy was used to observe the arrays. The 300 nm array features and the 500 nm center-to-center distance approach the minimum feature sizes viewable using conventional light microscopy.     

Patterning graphene through the self-assembled templates: toward periodic two-dimensional graphene nanostructures with semiconductor properties

Periodic graphene nanostructures are fabricated via patterning graphene through the self-assembled monolayers of monodisperse colloidal microspheres. The resulting structures exhibit promising electronic properties featuring high conductivities and ON-OFF ratios up to 10. The apparent advantages of the presented method are the possibilities of fabricating periodic graphene nanostructures with different periodicities, ranging from ～100 nm to several μm, and also varying the periodicity and the neck width independently. The use of the presented method yields graphene nanostructures with variable electronic properties.     

Length‐Dependent Charge Generation from Vertical Arrays of High‐Aspect‐Ratio ZnO Nanowires

Aqueous chemical growth of zinc oxide nanowires is a flexible and effective approach to obtain dense arrays of vertically oriented nanostructures with high aspect ratio. Herein we present a systematic study of the different synthesis parameters that influence the ZnO seed layer and thus the resulting morphological features of the free‐standing vertically oriented ZnO nanowires. We obtained a homogeneous coverage of transparent conductive substrates with high‐aspect‐ratio nanowire arrays (length/diameter ratio of up to 52). Such nanostructured vertical arrays were examined to assess their electric and piezoelectric properties, and showed an electric charge generation upon mechanical compressive stress. The principle of energy harvesting with these nanostructured ZnO arrays was demonstrated by connecting them to an electronic charge amplifier and storing the generated charge in a series of capacitors. We found that the generated charge and the electrical behavior of the ZnO nanowires are strictly dependent on the nanowire length. We have shown the importance of controlling the morphological properties of such ZnO nanostructures for optimizing a nanogenerator device.     

Shape-controlled synthesis and self-assembly of hexagonal covellite (CuS) nanoplatelets

Single-crystalline, hexagonal covellite (CuS) nanoplatelets were successfully synthesized through a facile, inexpensive, reproducible, and improved solvothermal process in toluene at 120 degrees C for 24 h with hexadecylamine as a capping agent and copper acetate and carbon disulfide as precursors. These nanoplatelets are about 26+/-1.5 nm in diameter and 8+/-1.2 nm thick, and have a tendency to self-assemble into pillarlike nanostructures with face-to-face stacks, raftlike nanostructures with side-by-side arrays, and stratiform nanostructures with layer-by-layer self-assembly. The crystal shape, morphology, and crystallographic orientation of the covellite obtained were investigated by means of XRD, TEM, and high-resolution TEM, and a potential self-assembly mechanism was proposed.     

Ultrahigh density arrays of toroidal ZnO nanostructures by one-step cooperative self-assembly processes: mechanism of structural evolution and hybridization with Au nanoparticles

A quick protocol for the fabrication of ultrahigh density arrays of toroidal ZnO nanostructures with tailored structures on a substrate surface is presented based on the one-step spin coating of a common solution composed of inverse micelles of polystyrene-block-poly(4-vinyl pyridine) copolymers (PS-b-P4VP) and sol-gel precursors without the need of conventional complex lithographic techniques. ZnO toroids decorated with gold nanoparticles are also obtained by subsequent loading and reduction of metallic precursors. It was elucidated that the diethanolamine moiety in the sol-gel precursors, which induces selective swelling and structural reorganization of the P4VP core blocks, plays a key role in the generation of toroidal nanostructures. Toroidal ZnO nanostructures embedded in a PS-b-P4VP matrix films or arrays of pure wurtzite ZnO nanorings are obtained by calcination under inert atmosphere. The structural parameters of the toroidal nanostructures such as the width, height, diameter of the rims as well as the spacing of their 2D arrays are controlled by employing PS-b-P4VP with different molecular weight and varying the mixing protocols.