Solid–Gas Hydrogenation of Hex-3-yne and 1,4-Cyclohexadiene in the Presence of Ru3(CO)9(μ-H)(μ-PPh2), Ru3(CO)10(μ-H)(μ-PPh2), Ru3(CO)7(μ-PPh2)2(C6H4), and Ru4(CO)11(μ4-PPh)(C6H4) Deposited on Pyrex Glass, Silica, and Alumina

The title complexes were tested in the hydrogenation of hex-3-yne and of 1,3- and 1,4-cyclohexadiene (CHD) under solid–gas conditions. The clusters were deposited on three “standard” supports, that is, pyrex glass, alumina, and silica. All the clusters, particularly (μ-H)Ru₃(CO)₁₀(PPh₂), show hydrogenation activity. However, they are not particularly selective toward the formation of monoenes; “disproportionation” of 1,3- and 1,4-CHD to hydrogenated products and benzene also occurs. The hydrogenation activity of the clusters is dependent on their nature, the type of substrate, and the characteristics of the supporting material; silica and pyrex glass are usually more active than alumina. Attempts at detecting the formation of organometallic intermediates or by-products (through IR spectroscopy) were made. HRTEM was used to check for eventual decomposition on some supports.     

The insertion of acetylene into the formal ruthenium-phosphorus bonds of closo-[Ru4(μ4-PPh)2(μ2-CO)(CO)10. Crystal structure of [Ru4(μ4-PPh){μ4-η3-P(Ph)CHCH}(μ2-CO)(CO)10]

Treatment of closo-[Ru₄(μ₄-PPh)₂(μ₂-CO)(CO)₁₀] with acetylene under ambient conditions leads to the insertion of the acetylene into the skeletal framework of the cluster and the formation of [Ru₄(μ₄-PPh){μ₄-η³-P(Ph)CHCH}(μ₂-CO)(CO)₁₀], the structure of which has been determined X-ray crystallographically.     

Addition of HCl to a Cluster-Bound Vinylidene Ligand: Preparation and Structure of Ru5(μ3-SMe)(μ3-CMe)(μ-Cl)(μ-SMe)(μ-PPh2)2(CO)9·PhMe

Addition of aqueous HCl to Ru₅( ₃-C=CH₂)(-SMe)₂(-PPh₂)₂(CO)₁₀ afforded the structurally characterized carbyne complex Ru₅( ₃-SMe)( ₃-CMe)(-Cl)(-SMe)(-PPh₂)₂(CO)₉, formed by addition of H to the vinylidene ligand; a Cl atom bridges an Ru–Ru bond.     

Synthesis of Platinum-Triruthenium Clusters Using the Zero-Valent Platinum Reagent Pt(nb)3: X-Ray Crystal Structures of Ru3Pt(CO)11(P-iPr3)2, Ru3Pt(μ-H)(μ3-η3-MeCCHCMe)(CO)9(P-iPr3), Ru3Pt(μ3-η2-PhCCPh)(CO)10(P-iPr3), Ru3Pt(μ-H)(μ4-N)(CO)10(P-iPr3) and Ru3Pt(μ-H)(μ4-η2-NO)(CO)10(P-iPr3)

The complexes Pt(nb)_3-n(P-iPr₃)_n (n=1, 2, nb=bicyclo[2.2.1]hept-2-ene), prepared in situ from Pt(nb)₃, are useful reagents for addition of Pt(P-iPr₃)_n fragments to saturated triruthenium clusters. The complexes Ru₃Pt(CO)₁₁(P-iPr₃)₂ (1), Ru₃Pt(-H)(₃-³-MeCCHCMe)(CO)₉(P-iPr₃) (2), Ru₃Pt(₃-²-PhCCPh)(CO)₁₀(P-iPr₃) (3), Ru₃Pt(-H)(₄-N)(CO)₁₀(P-iPr₃) (4) and Ru₃Pt(-H)(₄-²-NO)(CO)₁₀(P-iPr₃) (5) have been prepared in this fashion. All complexes have been characterized spectroscopically and by single crystal X-ray determinations. Clusters 1–3 all have 60 cluster valence electrons (CVE) but exhibit differing metal skeletal geometries. Cluster 1 exhibits a planar-rhomboidal metal skeleton with 5 metal–metal bonds and with minor disorder in the metal atoms. Cluster 2 has a distorted tetrahedral metal arrangement, while cluster 3 has a butterfly framework (butterfly angle=118.93(2)°). Clusters 4 and 5 posseses 62 CVE and spiked triangular metal frameworks. Cluster 4 contains a ₄-nitrido ligand, while cluster 5 has a highly unusual ₄-²-nitrosyl ligand with a very long nitrosyl N–O distance of 1.366(5) Å.     

Co-ordinatively unsaturated metal cluster compounds: Facile reactivity of the phosphinidene-capped phosphido-bridged triruthenium cluster [Ru3(μ3-PPh)(μ2-PPh2)2(CO)7]

The purple, phosphinidene-capped, phosphido-bridged triruthenium cluster [Ru₃(μ₃-PPh)(μ₂-PPh₂)₂(CO)₇] reacts readily with carbon monoxide, trimethylphosphite, sodium borohydride and diphenylacetylene under mild conditions to afford product mixtures from which [Ru₃(μ-PPh)(μ₂-PPh₂)₂(CO)_7+n] (n = 1, 2 or 3), [Ru₃(μ₃-PPh)(μ₂-PPh₂)₂(CO)₆{P(OMe)₃}], [Ru₃(μ₃-η³-PhPCPhCPh)(μ₂-PPh₂)₂(CO)₆], respectively, can be isolated. The structure of [Ru₃(μ₃-PPh)(μ₂-PPh₂)₂(CO)₆{P(OMe)₃}] has been established X-ray crystallographically.     

Synthesis and decarbonylation reactions of the triiron phosphinidene complex [Fe3Cp3(μ-H)(μ3-PPh)(CO)4]: easy cleavage and formation of P-H and Fe-Fe bonds

The binuclear phosphine complex [Fe(2)Cp(2)(μ-CO)(2)(CO)(PH(2)Ph)] (Cp = η(5)-C(5)H(5)) reacted with the acetonitrile adduct [Fe(2)Cp(2)(μ-CO)(2)(CO)(NCMe)] in dichloromethane at 293 K to give the trinuclear hydride-phosphinidene derivative [Fe(3)Cp(3)(μ-H)(μ(3)-PPh)(CO)(4)] as a mixture of cis,anti and trans isomers (Fe-Fe = 2.7217(6) ? for the cis,anti isomer). In contrast, photochemical treatment of the phosphine complex with [Fe(2)Cp(2)(CO)(4)] gave the phosphide-bridged complex trans-[Fe(3)Cp(3)(μ-PHPh)(μ-CO)(2)(CO)(3)] as the major product, along with small amounts of the binuclear hydride-phosphide complexes [Fe(2)Cp(2)(μ-H)(μ-PHPh)(CO)(2)] (cis and trans isomers), which are more selectively prepared from [Fe(2)Cp(2)(CO)(4)] and PH(2)Ph at 388 K. The photochemical decarbonylation of either of the mentioned triiron compounds led reversibly to three different products depending on the reaction conditions: (a) the 48-electron phosphinidene cluster [Fe(3)Cp(3)(μ-H)(μ(3)-PPh)(μ-CO)(2)] (Fe-Fe = 2.592(2)-2.718(2) ?); (b) the 50-electron complex [Fe(3)Cp(3)(μ-H)(μ(3)-PPh)(μ-CO)(CO)(2)], also having carbonyl- and hydride-bridged metal-metal bonds (Fe-Fe = 2.6177(3) and 2.7611(4) ?, respectively); and (c) the 48-electron phosphide cluster [Fe(3)Cp(3)(μ-PHPh)(μ(3)-CO)(μ-CO)(2)], an isomer of the latter phosphinidene complex now having three intermetallic bonds (Fe-Fe = 2.5332(8)-2.6158(8) ?).     

Diphenylphosphine and diphenylphosphido derivatives of [Ru3(μ-H)(μ3-ampy)(CO)9] (Hampy = 2-amino-6-methylpyridine)

The reactions of [Ru₃(μ-H)(μ-ampy)(CO)₉] (1) (Hampy = 2-amino-6-methylpyridine) with one or two equivalents of PPh₂H lead to the complexes [Ru₃(μ-H)(μ₃-ampy)(CO)₈(PPh₂H)] (2) or [Ru₃(μ-H)(μ₃-ampy)(CO)₇(PPh₂H)₂] (3), in which the PPh₂H ligands are cis to the bridging NH fragment and cis to the hydride. Complex 2 can be transformed in refluxing THF into the phosphido-bridged derivative [Ru₃(μ₃-ampy)(μ-PPh₂)(μ-CO)₂(CO)₆] (4), which contains the PPh₂ ligand spanning one of the two RuRu edges unbridged by the amido moiety, and presents an extremely high ³¹P chemical shift of 386.9 ppm. Under similar conditions, complex 3 gives a mixture of two isomers of [Ru₃(μ-H)(μ₃-ampy)(μ-PPh₂)₂(CO)₆] in a 5:1 ratio; the major product (5) has a plane of symmetry, whereas the minor one (6) is asymmetric.     

Electrochemical and Photochemical Conversion of [Ru3Ir(μ 3-H)(CO)13] into [Ru3Ir(μ-H)3(CO)12]

Electrochemical and photochemical properties of the tetrahedral cluster [Ru₃Ir( ₃-H)(CO)₁₃] were studied in order to prove whether the previously established thermal conversion of this cluster into the hydrogenated derivative [Ru₃Ir(-H)₃(CO)₁₂] also occurs by means of redox or photochemical activation. Two-electron reduction of [Ru₃Ir( ₃-H)(CO)₁₃] results in the loss of CO and concomitant formation of the dianion [Ru₃Ir( ₃-H)(CO)₁₂]^2–. The latter reduction product is stable in CH₂Cl₂ at low temperatures but becomes partly protonated above 283K into the anion [Ru₃Ir(-H)₂(CO)₁₂]^– by traces of water. The dianion [Ru₃Ir( ₃-H)(CO)₁₂]^2– is also the product of the electrochemical reduction of [Ru₃Ir(-H)₃(CO)₁₂] accompanied by the loss of H₂. Stepwise deprotonation of [Ru₃Ir(-H)₃(CO)₁₂] with Et₄NOH yields [Ru₃Ir(-H)₂(CO)₁₂]^– and [Ru₃Ir( ₃-H)(CO)₁₂]^2–. Reverse protonation of the anionic clusters can be achieved, e.g., with trifluoromethylsulfonic acid. Thus, the electrochemical conversion of [Ru₃Ir( ₃-H)(CO)₁₃] into [Ru₃Ir(-H)₃(CO)₁₂] is feasible, demanding separate two-electron reduction and protonation steps. Irradiation into the visible absorption band of [Ru₃Ir( ₃-H)(CO)₁₃] in hexane does not induce any significant photochemical conversion. Irradiation of this cluster in the presence of CO with _irr>340nm, however, triggers its efficient photofragmentation into reactive unsaturated ruthenium and iridium carbonyl fragments. These fragments are either stabilised by dissolved CO or undergo reclusterification to give homonuclear clusters. Most importantly, in H₂-saturated hexane, [Ru₃Ir( ₃-H)(CO)₁₃] converts selectively into the [Ru₃Ir(-H)₃(CO)₁₂] photoproduct. This conversion is particularly efficient at _irr >340nm.     

Synthesis and structural characterization of the first transition metal cluster containing a PPh2AuPPh3 ligand,Ir4(CO)8(μ-CO)3(PPh2AuPPh3), and its conversion into Ir4(CO)9(μ-CO)(μ-PPh2)(μ-AuPPh3)

Deprotonation of Ir₄(CO)₁₁PPh₂H (1) in the presence of [AuPPh₃][PF₆] yields the novel species Ir₄(CO)₁₁(PPh₂AuPPh₃) (2), which possesses a tetrahedral framework bearing a terminally bound PPh₂AuPPh₃ ligand. When heated in toluene, 2 is converted into the phosphido species Ir₄(CO)₁₀(μ-PPh₂)(μ-AuPPh₃).     

Synthesis and characterisation of hexanuclear ruthenium clusters containing a μ4-nitrene ligand. Crystal structures of [Ru6(CO)15(μ-CO)2(μ4NH)(μ-OMe)μ3-η2-N(H)C(O)OMe] and [Ru6(CO)16(μ-CO)2(μ4-NH)(μ-OMe)(μ-NCO)]

Two hexaruthenium carbonyl clusters [Ru₆(CO)₁₅(μ-CO)₂(μ₄-NH) (μ-OMe){μ₃-η²-N(H)C(O)OMe}] and [Ru₆(CO)₁₆(μ-CO)₂-(μ₄-NH)(μ-OMe)(μ-NCO)]2 have been isolated from the pyrolysis of H₂Ru₃(CO))₉NOCH₃, and single-crystal X-ray structure analysis shows that both 1 and 2 have a square planar arrangement of four ruthenium atoms capped by a μ₄-nitrene ligand, with two additional ruthenium atoms bridging two opposite RuRu edges of the square base to form a ‘boat’ form metal framework.     

Further studies of the reactions of PtRu5(μ6-C)(CO)16 with alkynes: The preparation and structural characterizations of PtRu5(CO)13(μ-EtC2Et)(μ3-EtC2Et)(μ5-C) and Pt2Ru6(CO)17(μ-η5-Et4C5)(μ3-EtC2Et) (μ6-C)

The reaction of PtRu₅(CO)₁₆(μ₆-C),1 with 3-hexyne in the presence of UV irradiation produced two new electron-rich platinum-ruthenium cluster complexes PtRu₅(CO)₁₃(μ-EtC₂Et)(μ₃-EtC₂Et)(μ₅-C),2 (20% yield) and Pt₂Ru₆(CO)₁₇(μ-η⁵-Et₄C₅)(μ₃-EtC₂Et) (μ₆-C),3 (7% yield). Both compounds were characterized by single-crystal X-ray diffraction analyses. Compound2 contains of a platinum capped square pyramidal cluster of five ruthenium atoms with the carbido ligand located in the center of the square pyramid. A EtC₂Et ligand bridges one of the PtRu₂ triangles and the Ru-Pt bond between the apical ruthenium atom and the platinum cap. The structure of compound3 consists of an octahedral PtRu₅ cluster with an interstitial carbido ligand and a platinum atom capping one of the PtRu₂ triangles. There is an additional Ru(CO)₂ group extending from the platinum atom in the PtRu₅ cluster that contains a metallated tetraethylcyclopentadienyl ligand that bridges to the platinum capping group. There is also a EtC₂Et ligand bridging one of the PtRu₂ triangular faces to the capping platinum atom. Compounds2 and3 both contain two valence electrons more than the number predicted by conventional electron counting theories, and both also possess unusually long metal-metal bonds that may be related to these anomalous electron configurations. Crystal data for2, space group Pna2₁,a=19.951(3) Å,b=9.905(2) Å,c=17.180(2) Å,Z=2, 1844 reflections,R=0.036; for3, space group Pna2₁,α=13.339(1) Å,b=14.671(2) Å,c=11.748(2) Å, α=100.18(1)°, β=95.79(1)°, γ=83.671(9)°,Z=2, 3127 reflections,R=0.026.     

Easy Access to Phosphido-Selenido Clusters. Reaction of [Ru3(CO)12] with Ph2(pyth)PSe {pyth=5-(2-Pyridyl)-2-Thienyl} and Crystal Structure of [Ru3(μ3-Se)(μ-PPh2)(μ-pyth)(CO)6{P(pyth)Ph2}]

The reaction of [Ru₃(CO)₁₂] with Ph₂(pyth)PSe (pyth=5-(2-pyridyl)-2-thienyl) allows to obtain two novel clusters [Ru₃(₃-Se)₂(CO)₇{P(pyth)Ph₂}₂] 1 and [Ru₃(₃-Se)(-PPh₂)(-pyth)(CO)₆{P(pyth)Ph₂}] 2 in satisfactory yields. The first one exhibits the well-known bicapped, open triangular, 50-electron nido-core, whereas 2, whose crystal structure has been determined, shows the rather rare Ru₃Se tetrahedron with the Ph₂P and pyth fragments as side-bridging ligands. Morever cluster 2 belongs to the exiguous family of selenido-phosphido clusters not easily achievable by other routes.     

Cleavage of 1,4-diphenylbuta-1,3-diyne on a ruthenium-cobalt cluster: Synthesis and molecular structure of Co2Ru3(μ4−C2Ph)(μ3−C2Ph)(μ-dppm)(μ-CO)2(CO)9

The reaction between Ru₃(₃-²-PhC₂C=CPh)(-dppm)(CO)₈ and Co₂(CO)₈ afforded dark red Co₂Ru₃(₄-C₂Ph)(₃-C₂Ph)(-dppm)(-CO)₂(CO)₉, shown by an X-ray structure determination to contain a strongly twisted Co₂Ru₃ bow-tie cluster (central Co), to which two PhC₂ units derived from cleavage of the original diyne are attached. One a these is strongly interacting with four metal atoms, the other being attached in the familiar ¹,2²-mode. The dppm ligand remains bridging two of the Ru atoms.     

Microwave Promoted Oxidative Addition Reactions of Os3(CO)12: Efficient Syntheses of Triosmium Clusters of the Type Os3(μ-X)2(CO)10 and Os3(μ-H)(μ-OR)(CO)10

Microwave heating allows for the high-yield, one-step synthesis of the known triosmium complexes Os₃(μ-Br)₂(CO)₁₀ (1), Os₃(μ-I)₂(CO)₁₀ (2), and Os₃(μ-H)(μ-OR)(CO)₁₀ with R = methyl (3), ethyl (4), isopropyl (5), n-butyl (6), and phenyl (7). In addition, the new clusters Os₃(μ-H)(μ-OR)(CO)₁₀ with R = n-propyl (8), sec-butyl (9), isobutyl (10), and tert-butyl (11) are synthesized in a microwave reactor. The preparation of these complexes is easily accomplished without the need to first prepare an activated derivative of Os₃(CO)₁₂, and without the need to exclude air from the reaction vessel. The syntheses of complexes 1 and 2 are carried out in less than 15 min by heating stoichiometric mixtures of Os₃(CO)₁₂ and the appropriate halogen in cyclohexane. Clusters 3–6 and 8–10 are prepared by the microwave irradiation of Os₃(CO)₁₂ in neat alcohols, while clusters 7 and 11 are prepared from mixtures of Os₃(CO)₁₂, alcohol and 1,2-dichlorobenzene. Structural characterization of clusters 2, 4, and 5 was carried out by X-ray crystallographic analysis. High resolution X-ray crystal structures of two other oxidative addition products, Os₃(CO)₁₂I₂ (12) and Os₃(μ-H)(μ-O₂CC₆H₅)(CO)₁₀ (13), are also presented.     

New electron-deficient alkene and alkyne derivatives of Ru5(μ5-C)(CO)15: The syntheses and crystal structure analyses of Ru5(μ5-C)(CO)13 [C2H2(CO2Me)2] and Ru5(μ5-C)(CO)15 [C2(CO2Me)2]

Treatment of carbido cluster Ru₅(μ ₅-C)(CO)₁₅ with Me₃NO in acetonitrile solution followed by addition of dimethyl maleate or dimethyl acetylene dicarboxylate affords new clusters Ru₅(μ ₅-C)(CO)₁₃[C₂H₂(CO₂Me)₂] (1) and Ru₅(μ ₅-C)(CO)₁₅[C₂(CO₂Me)₂] (2), respectively. Single crystal X-ray structural studies reveal that both complexes contain a wingtip-bridged butterfly pentametallic skeleton. In complex1 the maleate fragment is coordinated to one wingtip Ru atom through its carbon-carbon double bond and to the adjacent Ru atom by the formation of two O → Ru dative bonding interactions, while the acetylene dicarboxylate fragment in2 is best considered as acis-dimetallated alkene, linking one hinge Ru atom and the nearby Ru atom at the bridged position. Crystal data for1: space group P 4₂/n;a=20.199(6),c=13.941(3) Å,Z=8; finalR _F=0.025,R _w=0.026 for 3963 reflections withI>2σ(I). Crystal data for2: space group P2₁/n;a=9.634(3),b=20.062(6),c=17.372(5) Å,β=90.62(2)°,Z=4; finalR _F=0 033,R _w=0.036 for 4683 reflections withI>3σ(I).     

Synthesis and characterisation of novel selenium-containing clusters; crystal structures of [Ru4(μ4-Se)2(CO)8(μ-CO)3] and [Ru3(μ3-Se)2(CO)7(Ph2P(CH2)3PPh2)]

The compound [Ru₄(μ-Se)₂(CO)₈(μ3-CO)₃] (1), has been obtained in good yield by vacuum pyrolysis of [RU₃(CO)₁₂] with [Ph₂Se₂] at 185°C. Reaction of 1 with 1,3-bis(diphenylphosphino)propane at room temperature affords the novel cluster [RU₃(μ₃-Se)₂(CO)₇(Ph₂P(CH₂)₃PPh₂)] (2). The structures of 1 and 2 have been determined by an X-ray diffraction study.     

A New Preparation of Mo2(CO)8(μ-PPh2)2 and W2(CO)8(μ-PPh2)2 by a Phosphorus-Carbon Bond Cleavage Reaction. Crystal Structure of a New Polymorph of Mo2(CO)8(μ-PPh2)2

A new synthesis of Mo₂(CO)₈(-PPh₂)₂ and W₂(CO)₈(-PPh₂)₂ by the reaction of molybdenum and tungsten hexacarbonyls with a tetraazamacrocyclic ligand containing —CH₂PPh₂ side chains, comprising cleavage of the phosphorus-methylene bond has been performed. The complexes have been investigated by magnetic and spectroscopic measurements and by single-crystal structure analyses. The structural characterization of a new polymorph of Mo₂(CO)₈(-PPh₂)₂ has been described.     

Cluster chemistry: L. Trapping of arylnitrenes formed by cleavage of azoarenes in reactions with M3(CO)12 (M = Fe or Ru): X-ray structure of Ru3(μ3-NPh)2(μ-dppm)(CO)7

Trinuclear products obtained from reactions between M₃(CO)₁₂ (M = Fe or Ru) and azobenzenes are shown to have the structure M₃(μ₃-NAr)₂(CO)₉, rather than the o-semidine formulation proposed earlier. ETC CO-substitution reactions are similar to those of Ru₃(CO)₁₂, with isocyanides occupying axial sites and tertiary phosphines and phosphites occupying equatorial sites on the Ru₃(μ₃-NPh)₂(μ-dppm)(CO)₇, in which the dppm ligand spans the non-bonded Ru … Ru vector.     

KINETICS AND MECHANISM FOR INTRAMOLECULAR ISOMERIZATION OF HRu3 (μ3-η3-EtSCCMeCMe)(CO)9 TO Ru3(μ-SEt) (μ3-η3-CCMeCHMe)(CO)9

Abstract

The kinetics for isomerization of HRu₃ (μ₃-η³-EtSCCMeCMe)(CO)₉ TO Ru₃(μ-SEt) (μ₃-η³-CCMeCHMe)(CO)₉, were determined. The overall process involves C[sbnd]H elimination, C[sbnd]S and Ru[sbnd]Ru bond cleavage and Ru₂(μ-S) bond formation. Activation parameters were determined from the temperature dependence (ΔH^? = 127(3) kJ/mol, ΔS^?= 56(11) J/mol-K) and from the pressure dependence (0[sbnd]207 MPa, ΔV^? ₀ +12.7(1.1) cm³/mol, Δβ^? = +0.037(0.012) cm³/(mol-MPa)) of the rate constant. The data are consistent with an intramolecular reaction involving significant metal-metal or carbon-sulfur bond cleavage in the transition state. The activation volume is too large to be accommodated by C[sbnd]H elimination alone and CO dissociation is not involved.     

Cluster chemistry. 85. Addition of a gold acetylide to an Ru5 cluster. X-ray structure of AuRu5(μ5-C2PPh2)(μ-C2Ph)(μ-PPh2)(CO)13(PPh3)

The reaction between Ru₅(₅-C₂PPh₂)(-PPh₂)(CO)₁₃ and Au(C₂Ph)(PPh₃) afforded AuRu₅(₅-C₂PPh₂)(-C₂Ph)(-PPh₂)(CO)₁₃ (PPh₃), in which the Ru₅ cluster has a scorpion geometry; the Au(PPh₃) group bridges one of the Ru-Ru bonds of the Ru₃ triangle, while the C₂Ph group bridges one of the tail Ru-Ru vectors.For Part 84, see Ref. 1.