Synthesis and luminescent properties of hexagonal BaZnSiO4:Eu2+ phosphor

A green-emitting phosphor of hexagonal BaZnSiO₄:Eu²⁺ was prepared by a combustion-assisted synthesis method and an efficient green emission from ultraviolet to visible light was observed. The luminescence and crystallinity were investigated by using luminescence spectrometry and X-ray diffractometry. In the hexagonal structure of BaZnSiO₄:Eu²⁺ phosphor, Eu²⁺ ions occupy three different lattice sites by substitution for Ba²⁺ ions. Eu²⁺ ions on Ba (1) and Ba (2) sites gave emissions at about 505 nm while Eu²⁺ ions on Ba (3) sites showed an emission band at 403 nm. The excitation spectrum is a broad band extending from 260 to 465 nm, which matches the emission of ultraviolet light-emitting diodes. The critical quenching concentration of Eu²⁺ in BaZnSiO₄:Eu²⁺ phosphor is about 0.05 mol. The value of the critical transfer distance is calculated as 10.97 Å. The corresponding concentration quenching mechanism is verified to be the electric multipole–multipole interaction. The CIE coordinates of the optimized sample $\mathrm{Ba}_{0.95}\mathrm{ZnSiO}_{4}{:}\mathrm{Eu}_{0.05}^{2+}$ were calculated as (x,y)=(0.172,0.463).     

Synthesis and luminescence investigation of RE (Eu, Tb and Ce)-doped lithium silicate (Li2SiO3)

Synthesis and photoluminescence (PL) investigations of lithium metasilicate doped with Eu³⁺, Tb³⁺ and Ce³⁺ were carried out. PL spectra of Eu-doped sample showed peaks corresponding to the ⁵D₀→⁷F_j (j=1, 2, 3 and 4) transitions under ultraviolet excitation. Strong red emission coming from the hypersensitive ⁵D₀→⁷F₂ transition of Eu³⁺ ion suggested the presence of the dopant ion in structurally disordered environment. Tb³⁺-doped silicate sample showed blue-green emission corresponding to the ⁵D₄→⁷F_j (j=6, 5 and 4) transitions. Ce-doped sample under excitation from UV, showed a broad emission band in the region 350-370 nm with shoulders around 410 nm. The fluorescence lifetimes of Eu³⁺ and Tb³⁺ ions were found out to be 790 and 600 μs, respectively. For Ce³⁺, the lifetime was of the order of 45 ns. PL spectra of the europium- and terbium-doped samples were compared with commercial red (Y₂O₃:Eu³⁺) and green (LaPO₄:Tb³⁺) phosphors, respectively. It was found that the emission from the doped silicate sample was 37% of the commercial phosphor in case of the Tb-doped sample and 8% of the commercial phosphor in case of the Eu-doped sample.     

Concentration quenching of Eu<Superscript>2+</Superscript> in a novel blue–green emitting phosphor: Ba<Subscript>2</Subscript>ZnSi<Subscript>2</Subscript>O<Subscript>7</Subscript>:Eu<Superscript>2+</Superscript>

A novel blue–green emitting phosphor Ba₂ZnSi₂O₇: Eu²⁺ was prepared by a combustion synthesis (CS) method. An efficient green emission under conditions ranging from ultraviolet to visible light was observed. The emission spectrum shows a single intensive band centered at 503 nm, which corresponds to the 4f ⁶5d ¹→4f ⁷ transition of Eu²⁺. The excitation spectrum is a broad band extending from 260 to 465 nm, which matches the emission of ultraviolet light-emitting diodes (UV-LEDs). The critical quenching concentration of Eu²⁺ in Ba₂ZnSi₂O₇:Eu²⁺ phosphor is about 0.05 mol. The corresponding concentration quenching mechanism is verified to be a dipole–dipole interaction. The value of the critical transfer distance is calculated as 19 Å, which is in good agreement with the value (20 Å) derived from the experimental data.     

Synthesis and Optical Properties of Novel Red-Emitting PbNb<Subscript>2</Subscript>O<Subscript>6</Subscript>: Eu<Superscript>3+</Superscript> Phosphors

Undoped and PbNb₂O_6:Eu³⁺ (1.0 ≤ x ≤ 6.0 mol%) phosphors were synthesized at 1100 °C for 3.5 h by the conventional solid state reaction method. Synthesized PbNb₂O₆:Eu³⁺ phosphors were characterized by X-ray diffraction (XRD), Scanning electron microscopy (SEM), Energy dispersive spectroscopy (EDS) and Photoluminescence (PL) analyses. The PL spectra showed series of excitation peaks between 350 and 430 nm due to the 4f–4f transitions of Eu³⁺. For 395.0 nm excitation, emission spectra of Eu³⁺ doped samples were observed at 591 nm (orange) and 614 nm (red) due to the ⁵D₀ → ⁷F₁ transitions and ⁵D₀ → ⁷F₂ transitions, respectively. PL analysis results also showed that the emission intensity increased by increasing Eu³⁺ ion content. No concentration quenching effect was observed. The CIE chromaticity color coordinates (x,y) of the PbNb₂O₆:Eu³⁺ phosphors were found to be in the red region of the chromaticity diagram.     

Synthesis and Optical Characterization of Red-Emitting BaTa<Subscript>2</Subscript>O<Subscript>6</Subscript>:Eu<Superscript>3+</Superscript> Phosphors

Undoped and Eu³⁺ doped BaTa₂O₆ phosphors were synthesized via solid state reaction method and characterized by using XRD, SEM-EDS and photoluminescence (PL) analyses. The XRD results revealed that the crystal structure of BaTa₂O₆ allowed up to 10 mol% levels of Eu³⁺ ions due to the TTB characteristic network of adjacent octahedrals. SEM-EDS analyses confirmed the formation of BaTa₂O₆ structure and EuTaO₄ secondary phase. BaTa₂O_6:Eu³⁺ phosphors exhibited orange and red emissions at 592.2 nm and 615.7 nm in the visible region respectively. The Commission Internationale d’Eclairage (CIE) chromaticity coordinates of the BaTa₂O_6:Eu³⁺ phosphors that excited at λ _ex = 400 nm ranged from orangish-red to pinkish-red depending on increasing Eu³⁺ concentration.     

Synthesis and photoluminescence of CeO2:Eu phosphor powders

The crystalline structure and photoluminescence (PL) properties of europium-doped cerium dioxide synthesized by the solid-state reaction method were analyzed. CeO₂:Eu³⁺ phosphor powders exhibit the pure cubic fluorite phase up to 10 mol% doping concentration of Eu³⁺. With indirect excitation of CeO₂ host at 373 nm, the PL intensity quickly increases with increasing Eu³⁺ concentration, up to about 1 mol%, and then decreases indicating the concentration quenching. While with direct excitation (467 nm), much more stronger PL emissions, especially the electric dipole emission ⁵D₀-⁷F₂ at 612 nm, are observed and no concentration quenching occurs up to 10 mol% doping concentration of Eu³⁺. The nature of this behavior and the cause of the concentration quenching were discussed.     

UV-induced photoluminescence and thermally stimulated luminescence of CaSO4:Eu and CaF2:Tb3+ phosphors

Ultraviolet radiation induced changes in photoluminescence (PL) and thermally stimulated luminescence (TSL) of europium activated calcium sulphate (CaSO₄:Eu³⁺, Eu²⁺) and terbium doped calcium fluoride (CaF₂:Tb³⁺) phosphors have been studied. PL measurements suggest conversion of Eu³⁺ to Eu²⁺ on 254 nm irradiation corresponding to charge transfer band of Eu³⁺ ions and reduction of Eu²⁺ ions with 365 nm illumination representing a f–d transition of Eu²⁺ ions. Similar studies carried out on CaF₂:Tb³⁺ phosphor, however, do not show any significant wavelength specific changes. The integrated TSL output appears to be rate-dependent for both phosphors. The wavelength dependent changes in TSL output observed for CaSO₄:Eu phosphor have been correlated with those obtained in PL studies. The changes in TSL and PL characteristics of CaF₂:Tb³⁺ phosphor have been explained on the basis of stabilisation of traps based on matrix specific charge similarities.     

蓝色荧光粉Sr2B5O9Cl:Eu2+发光特性的研究

采用高温固相法合成了近紫外光激发的蓝色荧光粉Sr₂B₅O₉Cl:Eu²⁺,研究了SrCl₂ ·6H₂O用量和Eu²⁺浓度对其结构和发光性能的影响.随着Eu²⁺浓度的增加,其结构无明显变化,发光强度先增强后减弱,当其浓度为8mol%时,荧光粉的发光强度最大;当用Ca取代Sr时,荧光粉的发射峰从425 nm红移到453 nm. 适当过量 关键词： 氯硼酸盐 蓝色荧光粉 LED     

A potential red phosphor LiGd(MoO4)2:Eu for light-emitting diode application

Eu³⁺-doped LiGd(MoO₄)₂ red phosphor was synthesized by solid-state reaction, and its photoluminescent properties were measured. The effect of Eu³⁺ doping concentration on PL intensity was investigated, and the optimum concentration of Eu³⁺ doped in LiGd(MoO₄)₂ was found to be 30 mol%. Compared with Y₂O₂S:0.05Eu³⁺, Na_0.5Gd_0.5MoO₄:Eu³⁺ and KGd(MoO₄)₂:Eu³⁺, the LiGd(MoO₄)₂:Eu³⁺ phosphor showed a stronger excitation band around 395 nm and a higher intensity red emission of Eu³⁺ under 395 nm light excitation. For the first time, intensive red light-emitting diodes (LEDs) were fabricated by combining phosphor and a 395 nm InGaN chip, confirming that the LiGd(MoO₄)₂:Eu³⁺ phosphor is a good candidate for LED applications.     

Novel red phosphor of double perovskite compound La2MgTiO6:xEu3+

A novel red phosphor La₂MgTiO₆:xEu³⁺ was successfully synthesized by the conventional solid state method. Excited by ultraviolet (395 nm) and blue (465 nm) light, La₂MgTiO₆:xEu³⁺ exhibits intense red emission. Due to the lack of inversion symmetry at the doping sites, the dominant emission peak is from the transition ⁵D₀→⁷F₂. Non-radiative transitions were demonstrated to be from dipole–dipole interactions and the critical distance was estimated to be ～9.19 Å. When Eu³⁺ ions' concentration reaches 15%, the emission intensity is about three times higher than that of the conventional phosphor Y₂O₃:Eu³⁺. The Commission International de L'Eclairage chromaticity coordinate was calculated to be x=0.657 and y=0.343. All the results indicate that La₂MgTiO₆:xEu³⁺ has superior luminescence properties.     

Hydrothermal synthesis,characterization, and luminescence of Ca<Subscript>2</Subscript>B<Subscript>2</Subscript>O<Subscript>5</Subscript>:RE (RE = Eu<Superscript>3+</Superscript>, Tb<Superscript>3+</Superscript>, Dy<Superscript>3+</Superscript>) nanofibers

Ca₂B₂O₅:RE (RE = Eu³⁺, Tb³⁺, Dy³⁺) nanofibers were synthesized by the hydrothermal reaction method. The structural refinement was conducted on the base of the X-ray powder diffraction (XRD) measurements. The surface properties of the Ca₂B₂O₅:RE (RE = Eu³⁺, Tb³⁺, Dy³⁺) nanofibers were investigated by the measurements such as the scanning electron microscope (SEM), transmission electron microscope (TEM), and the energy dispersive spectrum (EDS). The nanofiber has a diameter of about 100 nm and a length of several micrometers. The luminescence properties such as photoluminescence excitation (PLE) and emission spectra (PL), decay lifetime, color coordinates, and the absolute internal quantum efficiency (QE) were reported. Ca₂B₂O₅:Eu³⁺ nanofibers show the red luminescence with CIE coordinates of (x = 0.41, y = 0.51) and the luminescence lifetime of 0.63 ms. The luminescence of Ca₂B₂O₅:Tb³⁺ nanofibers is green color (x = 0.29, y = 0.53) with the lifetime of 2.13 ms. However, Dy³⁺-doped Ca₂B₂O₅ nanofibers present a single-phase white-color phosphor with the fluorescence decay of 3.05 ms. Upon near-UV excitation, the absolute quantum efficiency is measured to be 65, 35, and 37 % for Eu³⁺-, Tb³⁺-, Dy³⁺-doped Ca₂B₂O₅ nanofibers, respectively. It is suggested that Ca₂B₂O₅:RE (RE = Eu³⁺, Tb³⁺, Dy³⁺) nanofibers could be an efficient phosphor for lighting and display.     

Synthesis, characterization, thermo- and photoluminescence properties of Bi3+ co-doped Gd2O3:Eu3+ nanophosphors

Gd₂O₃:Eu³⁺ (4 mol%) co-doped with Bi³⁺ (Bi = 0, 1, 3, 5, 7, 9 and 11 mol%) ions were synthesized by a low-temperature solution combustion method. The powders were calcined at 800°C and were characterized by powder X-ray diffraction (PXRD), transmission electron microscopy (TEM), Fourier transform infrared and UV–Vis spectroscopy. The PXRD profiles confirm that the calcined products were in monoclinic with little cubic phases. The particle sizes were estimated using Scherrer’s method and Williamson–Hall plots and are found to be in the ranges 40–60 nm and 30–80 nm, respectively. The results are in good agreement with TEM results. The photoluminescence spectra of the synthesized phosphors excited with 230 nm show emission peaks at ～590, 612 and 625 nm, which are due to the transitions ⁵D₀→⁷F₀, ⁵D₀→⁷F₂ and ⁵D₀→⁷F₃ of Eu³⁺, respectively. It is observed that a significant quenching of Eu³⁺ emission was observed under 230 nm excitation when Bi³⁺ was co-doped. On the other hand, upon 350 nm excitation, the luminescent intensity of Eu³⁺ ions was enhanced by incorporation of Bi³⁺ (5 mol%) ions. The introduction of Bi³⁺ ions broadened the excitation band of Eu³⁺ of which a new strong band occurred ranging from 320 to 380 nm. This has been attributed to the 6s²→6s6p transition of Bi³⁺ ions, implying a very efficient energy transfer from Bi³⁺ ions to Eu³⁺ ions. The gamma radiation response of Gd₂O₃:Eu³⁺ exhibited a dosimetrically useful glow peak at 380°C. Using thermoluminescence glow peaks, the trap parameters have been evaluated and discussed. The observed emission characteristics and energy transfer indicate that Gd₂O₃:Eu³⁺, Bi³⁺ phosphors have promising applications in solid-state lighting.     

Photoluminescence of Y2O3:Eu thin film phosphors by sol-gel deposition and rapid thermal annealing

Y₂O₃:Eu³⁺ phosphor films have been developed by using the sol-gel process. Comprehensive characterization methods such as Photoluminescent (PL) spectroscopy, X-ray diffraction (XRD) and Fourier Transform Infrared (FTIR) spectroscopy were used to characterize the Y₂O₃:Eu³⁺ phosphor films. In this experiment, the XRD profiles show that the Y₂O₃:Eu³⁺ phosphor films crystallization temperature and optimum annealing temperature occur at about 650 and 750 °C, respectively. The optimum dopant concentration is 12 mol% Eu³⁺ and the critical transfer distance (R_c) among Eu³⁺ ions is calculated to be about 0.84 nm. Vacuum environment is more efficient than oxygen and nitrogen to eliminate the OH content and hence yields higher luminescent phosphor films. The PL emission intensity of Y₂O₃:Eu³⁺ phosphor films is also dependent on the annealing time. It was found that the H₂O impurities were effectively eliminated after annealing time of 25 s at 750 °C in vacuum environment. From the experiment results, the schematic energy band diagram of Y₂O₃:Eu³⁺ phosphor films is constructed.     

Thermo-luminescence kinetic parameters of γ-irradiated Sr4Al14O25:Eu2+, Dy3+ phosphors

In this paper, we present a detailed investigation of the thermo-luminescence (TL) kinetics of the long afterglow phosphor, Sr₄Al₁₄O₂₅:Eu²⁺,Dy³⁺, synthesized by the combustion method. Kinetic parameters such as the activation energy (E_α), the frequency factor (s) and the order of kinetics (b) were calculated using Chen's formulism. The crystalline structure of the phosphor was examined using X-ray powder diffraction and transmission electron microscopy. The average particle size was found to be in the range of 45–52 nm. The optimum dopant concentrations were Eu (1 mol%) and that of Dy (2 mol%). The TL response of the phosphor was monitored after the samples were irradiated with a γ-dose using a ⁶⁰Co source in the 20-800 Gy range. A broad TL peak, (stretching from 328 to 410 K) with a maximum at 368 K was observed. With increasing irradiation dose, the main peak shifts toward higher temperatures. Symmetry factor calculations show that the main TL glow peak obeys second-order kinetics, which could be attributed to the creation of deep level traps. This means that γ-ray irradiation greatly affects the distribution of traps in the Sr₄Al₁₄O₂₅:Eu²⁺,Dy³⁺ phosphor. The phosphor showed a linear response with γ-dose.     

Novel EGCG assisted ultrasound synthesis of self-assembled Ca2SiO4:Eu3+ hierarchical superstructures: Photometric characteristics and LED applications

This paper reports for the first time ultrasound, EGCG assisted synthesis of pure and Eu³⁺ (1–5 mol%) activated Ca₂SiO₄ nanophosphors having self-assembled superstructures with high purity. The shape, size and morphology of the product were tuned by controlling influential parameters. It was found that morphology was highly dependent on EGCG concentration, sonication time, pH and sonication power. The probable formation mechanism for various hierarchical superstructures was proposed. The PL studies of Ca₂SiO₄:Eu³⁺ phosphors can be effectively excited by the near ultraviolet (UV) (396 nm) light and exhibited strong red emission around 613 nm, which was attributed to the Eu³⁺ (⁵D₀ → ⁷F₂) transition. The concentration quenching phenomenon was explained based on energy transfer between defect and Eu³⁺ ions, electron–phonon coupling and Eu³⁺–Eu³⁺ interaction. The Judd–Ofelt intensity parameters and radiative properties were estimated by using PL emission spectra. The photometric studies indicate that the obtained phosphors could be a promising red component for possible applications in the field of white light emitting diodes.     

Synthesis and luminescence properties of red long-lasting phosphor Y2O2S:Eu3+, Zn2+, Ti4+ nanotubes via hydrothermal method

Red long-lasting phosphor Y₂O₂S:Eu³⁺, Zn²⁺, Ti⁴⁺ nanotubes were prepared by hydrothermal method. Powder X-ray diffraction (XRD), scanning electron microscopy (SEM), photoluminescence and thermoluminescence spectra (TL) were used to characterize the long-lasting phosphor. XRD investigation revealed that the product synthesised under 750 °C for 6 h was a pure phase of Y₂O₂S. SEM observation showed that the sulfuretted phosphor inherited the tube-like shape from the precursor. Under 325 nm UV excitation, the result indicated the strongest red-emission lines at 627 nm, corresponded to the transition from ⁵D₀ to ⁷F₂ level of Eu³⁺ ion. Both the afterglow decay curves and TL curves revealed that the phosphor had efficient luminescent and excellent long-lasting properties.     

Low-voltage cathodoluminescence property of Li-doped Gd2−xYxO3:Eu

Cathodoluminescent (CL) spectra of Li-doped Gd_2−xY_xO₃:Eu³⁺ solid-solution (0.0?x?0.8) were investigated at low voltages (300 V-1 kV). The CL intensity is maximum for the composition of x=0.2 and gradually reduces with increasing the amount of substituted Y content. In particular, small (∼100 nm) particles of Li-doped Gd_1.8Y_0.2O₃:Eu³⁺ are obtained by firing the citrate precursors at only 650°C for 18 h. Relative red-emission intensity at 300 V of this phosphor is close to 180% in comparison with that of commercial red phosphor Y₂O₃:Eu³⁺. An increase of firing temperature to 900°C results in 400-600 nm sized spherical particles. At low voltages (300-800 V), the CL emission of 100 nm sized particles is much stronger than that of 400-600 nm sized ones. In contrast, the larger particles exhibit the higher CL emission intensity at high voltages (1-10 kV). Taking into consideration small spherical morphology and effective CL emission, Li-doped Gd_1.8Y_0.2O₃:Eu³⁺ appears to be an efficient phosphor material for low voltage field emission display.     

Photoluminescence characterization of a novel red-emitting phosphor In2(MoO4)3:Eu3+ for white light emitting diodes

The red-emitting phosphor In₂(MoO₄)₃:Eu³⁺ with cubic crystal structure was synthesized by a conventional solid-state reaction technique and its photoluminescence properties were investigated. The prepared phosphor can be efficiently excited by ultraviolet (395 nm) and blue (466 nm) light. The emission spectra of the phosphor manifest intensive red-emitting lines at 612 nm due to the electric dipole ⁵D₀→⁷F₂ transitions of Eu³⁺. The chromaticity coordinates of x=0.63, y=0.35 (λ_ex=395 nm) and x=0.60, y=0.38 (λ_ex=466 nm) are close to the standard of National Television Standard Committee values (NTSC) values. The concentration quenching of In₂(MoO₄)₃:Eu³⁺ is 40 mol% and the concentration self-quenching mechanism under 466 nm excitation was the dd intereaction. As a result of the strong emission intensity and good excitation, the phosphor In₂(MoO₄)₃:Eu³⁺ is regarded as a promising red-emitting conversion material for white LEDs.     

Synthesis and luminescent properties of BaGd2O4:Dy3+, an novel scintillating phosphor

The BaGd_2?x O₄:xDy³⁺ (0 ≤ x ≤ 0.08) phosphors were synthesized at 1,300 °C in air by the solid-state reaction route. The as-synthesized phosphors were characterized by X-ray powder diffraction, photoluminescence excitation spectra, photoluminescence (PL) spectra, X-ray excited luminescence (XEL) spectra, and thermoluminescence (TL) spectra. It is found that the quenching concentration of Dy³⁺ ions in BaGd₂O₄ host is dependent on the selected excitation wavelength. The optimal PL intensity for the investigated BaGd_2?x O₄:xDy³⁺ phosphors is found to be x = 0.01, 0.02, and 0.04, upon excitation by 234, 277, and 350 nm ultraviolet light, respectively. The energy transfer among Dy³⁺ ions upon excitation by 350 nm is confirmed to be an electric dipole–dipole interaction mechanism based on the fitting of Huang’s rule. In addition, the intensive XEL from BaGd₂O₄:Dy³⁺ phosphor is observed by the naked eyes at room temperature, and TL properties of the investigated phosphors are analyzed and discussed. All the results imply that the investigated phosphors could be a promising scintillating phosphor.     

Synthesis and luminescence properties of Na2Ba2Si2O7:Eu2+ phosphor

Green-emitting phosphor Na₂Ba₂Si₂O₇:Eu²⁺ has been synthesized by a conventional high-temperature solid-state reaction. The phase structure and luminescence properties are characterized by the X-ray powder diffraction, diffuse reflectance spectra, photoluminescence excitation and emission spectra, temperature-dependent emission spectra, respectively. It can be efficiently excited in the wavelength range of 325–400 nm and consists of a strong broad green band centered at about 501 nm, which is ascribed to 4f⁶6s⁰5d¹ → 4f⁷6s²5d⁰ transition of Eu²⁺. The critical quenching concentration of Eu²⁺ in the Na₂Ba₂Si₂O₇ host is about 0.8 mol % and corresponding quenching behavior is ascribed to be electric dipole–dipole interaction. Furthermore, the phosphor has good thermal stability property, and the activation energy for thermal quenching is calculated as 0.34 eV.