Synthesis and characterization of oxidized W(6)S(8)L(6) clusters

Cationic [W(6)S(8)L(6)]PF(6) (L = PEt(3) (3), 4-tert-butylpyridine (4)) clusters were successfully synthesized and isolated for the first time by reacting the corresponding neutral W(6)S(8)L(6) (L = PEt(3) (1), 4-tert-butylpyridine (2)) clusters with [Cp(2)Fe]PF(6) as the oxidant. The products 3 and 4 were characterized by NMR spectroscopy, mass spectroscopy, and X-ray crystallography (only for 3) and shown to be the desired oxidized W(6)S(8) clusters with a metal electron count of 19. Magnetic property studies showed that they are paramagnetic compounds with S = (1)/(2). Their chemical properties and stability are also reported. Crystal data for 3.2 THF: space group, R3 (No. 148); a = 13.91170(10) A; c = 32.4106(2) A; Z = 3.     

Synthesis, characterization, and ligand exchange studies of W(6)S(8)L(6) cluster compounds

Eleven organic Lewis bases were investigated as potential ligands (L) on W(6)S(8)L'(6) clusters by exploring ligand exchange reactions to form W(6)S(8)L(6) clusters. Six new homoleptic W(6)S(8)L(6) cluster complexes were prepared and characterized with L = tri-n-butylphosphine (P(n)Bu(3)), triphenylphosphine (PPh(3)), tert-butylisocyanide ((t)BuNC), morpholine, methylamine (MeNH(2)), and tert-butylamine ((t)BuNH(2)). While partial replacement of ligands occurred with diethylamine (Et(2)NH) and dibutylamine (Bu(2)NH), homoleptic clusters could not be prepared by these exchange reactions. When aniline, tribenzylamine, and tri-tert-butylphosphine were the potential ligands, no exchange was observed. From ligand exchange studies of these ligands and others previously studied, a thermodynamic series of binding free energies for ligands on W(6)S(8)L(6) clusters was established as the following: non-Lewis base solvents, aniline, P(t)()Bu(3), etc. < Et(2)NH, Bu(2)NH < (t)BuNH(2) < morpholine, piperidine < or = (n)BuNH(2), MeNH(2) < or = 4-tert-butylpyridine, pyridine < (t)BuNC < tricyclohexylphosphine (PCy(3)) < PPh(3), P(n)Bu(3) < or = triethylphosphine (PEt(3)). Structures of the new cluster complexes were determined by X-ray crystallography. The new compounds were also characterized by NMR spectroscopy and thermogravimetric analyses (TGA). The W-L bond orders and TGA data qualitatively agree with the thermodynamic series above.     

Synthesis of metal-hydrazone complexes and vapochromic behavior of their hydrogen-bonded proton-transfer assemblies

We synthesized and investigated a new series of metal-hydrazone complexes, including deprotonated [MX(mtbhp)] and protonated forms [MX(Hmtbhp)](ClO(4)) (M = Pd(2+), Pt(2+); X = Cl(-), Br(-); Hmtbhp = 2-(2-(2-(methylthio)benzylidene)hydrazinyl)pyridine) and hydrogen-bonded proton-transfer (HBPT) assemblies containing [PdBr(mtbhp)] and bromanilic acid (H(2)BA). The mtbhp hydrazone ligand acts as a tridentate SNN ligand and provides a high proton affinity. UV-vis spectroscopy revealed that these metal-hydrazone complexes follow a reversible protonation-deprotonation reaction ([MX(mtbhp)] + H(+) ? [MX(Hmtbhp)](+)), resulting in a remarkable color change from red to yellow. Reactions between proton acceptor [PdBr(mtbhp)] (A) and proton donor H(2)BA (D) afforded four types of HBPT assemblies with different D/A ratios: for D/A = 1:1, {[PdBr(Hmtbhp)](HBA)·Acetone} and {[PdBr(Hmtbhp)](HBA)·2(1,4-dioxane)}; for D/A = 1:2, [PdBr(Hmtbhp)](2)(BA); and for D/A = 3:2, {[PdBr(Hmtbhp)](2)(HBA)(2)(H(2)BA)·2Acetonitrile}. The proton donor gave at least one proton to the acceptor to form the hydrogen bonded A···D pair of [PdBr(Hmtbhp)](+)···HBA(-). The strength of the hydrogen bond in the pair depends on the kind of molecule bound to the free monoanionic bromanilate OH group. Low-temperature IR spectra (T < 150 K) showed that the hydrogen bond distance between [PdBr(Hmtbhp)](+) and bromanilate was short enough (ca. 2.58 ?) to induce proton migration in the [PdBr(Hmtbhp)](2)(BA) assembly in the solid state. The hydrogen bonds formed not only between [PdBr(Hmtbhp)](+) and HBA(-) but also between HBA(-) and neutral H(2)BA molecules in the {[PdBr(Hmtbhp)](2)(HBA)(2)(H(2)BA)·2Acetonitrile} assembly. The H(2)BA-based flexible hydrogen bond network and strong acidic host structure result in an interesting vapor adsorption ability and vapochromic behavior in this assembly because the vapor-induced rearrangement of the hydrogen bond network, accompanied by changes in π-π stacking interactions, provides a recognition ability of proton donating and accepting properties of the vapor molecule.     

W6S8] octahedral tungsten clusters functionalized with thiophene derivatives: toward polymerizable building blocks

The functionalization of octahedral [W(6)S(8)] clusters with a family of phosphino-thiophene ligands has been investigated with the goal of synthesizing extended networks of [W(6)S(8)] units covalently linked to one another through thiophene-conjugated bridges. In addition to new phosphino-thiophene ligands, eight clusters were synthesized and characterized by (1)H and (31)P NMR spectroscopies, elemental analysis, and UV-vis absorption. These clusters are formulated [W(6)S(8)(T-PPh(2))6] (1a), [W(6)S(8)(T-PEt(2))(6)] (1b), [W(6)S(8)(2T-PPh(2))(6)] (2a), [W(6)S(8)(2T-PEt(2))(6)] (2b), [W(6)S(8)(3T-PPh(2))(6)] (3a), [W(6)S(8)(3T-PEt(2))(6)] (3b), [W(6)S(8)((2T)(3)P)(6)] (4), and [W(6)S(8)(2EDOT-PEt(2))(6)] (5) (T = thiophene and EDOT = 3,4-ethylenedioxythiophene). The molecular structure of six of them has been obtained by single-crystal X-ray diffraction analysis. All of them crystallize in the P1 triclinic space group except 3b, which has the P2(1)/c monoclinic symmetry. The redox behavior of both the ligands and the corresponding functionalized clusters has been investigated by cyclic voltammetry. An attempt to electropolymerize these species is also reported.     

Diastereoselective noncovalent synthesis of hydrogen-bonded double-rosette assemblies

Chiral centers present either in the dimelamine components of calix[4]arene 1 or in the cyanurate components CA quantitatively induce one handedness (P or M) in the corresponding hydrogen-bonded assemblies 1(3).(CA)(6) (de>98 %). The high degree of chiral induction results from the presence of six chiral centers in close proximity (C(alpha)) to the core of the assembly. A much lower level of chiral induction is observed for assemblies with chiral centers that are more remote (C(beta)). All diastereomerically pure assemblies 1(3).(CA)(6) exhibit very high CD activities (deltavarepsilon(max) approximately 100 L mol(-1) cm(-1)), in sharp contrast to the low CD activities (deltavarepsilon(max)相似文献   

Synthesis, characterization, and substitution chemistry of [Bu4N]2[W6Cl8(OSO2CF3)6]. A versatile precursor for axially substituted clusters containing the (W6Cl8)4+ core

The new cluster [Bu4N]2[W6Cl8(OSO2CF3)6] (1) has been prepared and structurally characterized. This material is an effective precursor for the generation of cluster ions with the general formula [W6C18L6]n (L = Cl-, Br-, I-, NCS-, NCO-, NCSe-, and O=PPh3; n = 2- or 4+). The last three clusters are new. The products have been characterized by IR spectroscopy, NMR spectroscopy, and FAB mass spectrometry. In addition to 1, the products [Bu4N]2[W6C18(NCS)6] (5) and [Bu4N]2[W6C18(NCO)6] (7) were structurally characterized. Crystal data for 1: space group, P2(1/c) (No. 14); a = 11.116(5) A; b = 27.952(1) A; c = 24.516(1) A; beta = 95.182(9) degrees; V = 7586.3(5) A3; Z = 4. Crystal data for 5: space group, P2(1/n) (No. 14); a = 11.3323(9) A; b = 12.3404(9) A; c = 44.583(3) A; beta = 97.089(1) degrees ; V = 6187.1(7) A3; Z = 4. Crystal data for 7: space group, P1 (No. 2); a = 11.8009(8) A; b = 11.9332(8) A; c = 11.9522(8) A; alpha = 77.904(1) degrees; beta = 95.182(9) degrees; gamma = 62.574(1) degrees V = 1450.5(2) A3; Z = 1.     

Enantioselective noncovalent synthesis of hydrogen-bonded double-rosette assemblies

The noncovalent synthesis of enantiomerically pure hydrogen-bonded assemblies (M)- and (P)-1(3).(CA)(6) is described. These dynamic assemblies are of one single handedness (M or P), but do not contain any chiral components. They are prepared by using the "chiral memory" concept: the induction of supramolecular chirality is achieved through initial assembly with chiral barbiturates, which are subsequently replaced by achiral cyanurates. This exchange process occurs quantitatively and without loss of the M or P handedness of the assemblies. Racemization studies have been used to determine an activation energy for racemization of 105.9+/-6.4 kJ mol(-1) and a half-life time to racemization of 4.5 days in benzene at 18 degrees C. Kinetic studies have provided strong evidence that the rate-determining step in the racemization process is the dissociation of the first dimelamine component 1 from the assembly 1(3).(CA)(6). In addition to this, it was found that the expelled chiral barbiturate (RBAR or SBAR) acts as a catalyst in the racemization process. Blocking the dissociation process of dimelamines 1 from assembly 1(3).(CA)(6) by covalent capture through a ring-closing metathesis (RCM) reaction produces an increase of more than two orders of magnitude in the half-life time to racemization.     

Dendrimer-based hydrogen-bonded liquid crystalline complexes: Synthesis and characterization

Three generations of dendritic polyester macromolecules based on 5-hydroxyisophthalic acid were synthesized by the divergent growth approach. The characterization of dendritic fragments was performed using a combination of ¹H NMR, ¹³C NMR spectroscopy and elemental analysis. The dendritic hydrogen-bonded supramolecular liquid crystalline complexes were prepared from different generation of dendritic acids and stilbazole derivative containing pyridyl units. The polarizing optical microscopy (POM) and differential scanning calorimetry (DSC) were used for investigation of the liquid crystalline properties of the hydrogen-bonded dendritic supramolecular complexes.     

Synthesis and characterization of A4[Re6Q8L6]@SiO2 red-emitting silica nanoparticles based on Re6 metal atom clusters (A = Cs or K, Q = S or Se, and L = OH or CN)

Metal atom clusters constitute very promising candidates as luminophores for applications in biotechnology because they are nanosized entities offering robust luminescence in the near-infrared field (NIR). However, they cannot be used as prepared for biological applications because of potential toxic effects and quenching of the clusters' luminescence in aqueous media, and they therefore need to be dispersed in a biocompatible matrix. We describe herein the encapsulation of octahedral rhenium clusters, denoted as A(4)[Re(6)Q(8)L(6)] (A = Cs or K, Q = S or Se, and L = OH or CN), in silica nanoparticles by a water-in-oil microemulsion process, paying particular attention to the clusters' stability. The obtained A(4)[Re(6)Q(8)L(6)]@SiO(2) nanoparticles are 30 nm in size with good monodispersity and a perfectly spherical shape, as shown by scanning electron microscopy (SEM). The presence of cluster units inside the silica matrix was evidenced by scanning transmission electron microscopy in annular dark-field mode (ADF-STEM). From the point of view of their optical properties, the A(4)[Re(6)Q(8)L(6)]@SiO(2) nanoparticles show red and NIR emission under UV excitation, even when dispersed in water. The evolution of the structural and luminescence properties of clusters before and after encapsulation was followed by Raman and photoluminescence spectroscopy.     

Organized assemblies of magnetic clusters

In this work we have explored the possibilities to create layered organizations of the Mn₁₂ single-molecule magnets using the Langmuir–Blodgett technique or attaching these clusters onto a metal surface by preparing self-assembled monolayers (SAMs). In the first part we discuss the use of the Langmuir–Blodgett (LB) technique in order to obtain organized magnetic films formed by monolayers of these clusters. Two strategies have been used with this aim. The first one consists of mixing Mn₁₂ acetate or benzoate derivatives with an amphiphile, while the second procedure is based on the use of Mn₁₂ derivatives specifically designed to form LB films. An alternative method is that of preparing self-assembled monolayers (SAMs). Some preliminary results obtained with this method are reported in the second part of the work. To cite this article: M. Clemente-León et al., C. R. Chimie 6 (2003).     

Ligand substitution reactions of W6S8L6 with tricyclohexylphosphine (L = 4-tert-butylpyridine or n-butylamine): 31P NMR and structural studies of W6S8(PCy3)n(4-tert-butylpyridine)6-n (0 < n < or = 6) complexes

The substitution reactions by bulky tricyclohexylphosphine (PCy3) ligands on W6S8L6 (L = 4-tert-butylpyridine or n-butylamine) clusters were investigated to prepare clusters with mixed axial ligands for low-dimensional cluster linking. When 4-6 equiv of PCy3 are used to react with W6S8(4-tert-butylpyridine)6 (4) in THF, cis-W6S8(PCy3)4(4-tert-butylpyridine)2 (1) is preferentially formed. But when starting with W6S8(n-butylamine)6 (2), only W6S8(PCy3)6 (3) is produced with 6 equiv of PCy3. Other conditions with fewer equivalents of PCy3 led to mixtures of partially substituted complexes in the W6S8L6-n(PCy3)n (0 < or = n < or = 6, L = 4-tert-butylpyridine or n-butylamine) series. A significantly distorted structure for 1 helps to explain its preferential formation. 1H NMR spectra were collected for clusters 1 and 2 and 31P NMR spectra for 1 and W6S8(4-tert-butylpyridine)6-n(PCy3)n complexes. P-P coupling through P-W-W-P is reported for the first time in octahedral metal clusters and shown to be very useful in identifying nearly all the W6S8L6-n(PR3)n complexes and their stereoisomers in the mixtures even before individual species are isolated.     

Preparation and physical properties of BiMo6S8 and SbMo6S8

The compounds Me₁Mo₆S₈ (Me = Bi, Sb) were prepared by low-temperature diffusion of Bi and Sb into the binary phase Mo₆S₈. The homogeneity range of the ternary elements is very narrow and centered about Me = 1.0, implying that the ternary metal is located at the origin position of the rhombohedral unit cell. The observed lattice parameters (BiMo₆S₈, a_h = 9.194, c_h = 11.325; SbMo₆S₈, a_h = 9.122, c_h = 11.282) are consistent with this hypothesis and suggest that these atoms enter the structure as trivalent cations. No superconducting transition is observed for these materials above 2 K. A small temperature-independent paramagnetism is present in the magnetic susceptibility of these compounds. The magnitude of this paramagnetism is less than that found in other ternary molybdenum chalcogenides with trivalent cations, suggesting that a reduced density of states is responsible for the observed lack of superconductivity. Attempts to prepare MeMo₆(S_1−xSe_x)₈ (Me = Sb and Bi) with x > 0 failed to yield ternary phases, instead producing mixtures of the unreacted ternary metal and the corresponding binary phase.     

Self-organization of gold-containing hydrogen-bonded rosette assemblies on graphite surface

The self-organization of supramolecular structures, in particular gold-containing hydrogen-bonded rosettes, on highly oriented pyrolytic graphite (HOPG) surfaces was investigated by tapping-mode atomic force microscopy (TM-AFM) and scanning tunneling microscopy (STM). TM-AFM and high-resolution STM results show that these hydrogen-bonded assemblies self-organize to form highly ordered domains on HOPG surfaces. We find that a subtle change in one of the building blocks induces two different orientations of the assembly with respect to the surface. These results provide information on the control over the construction of supramolecular nanoarchitectures in 2D with the potential for the manufacturing of functional materials based on structural manipulation of molecular components.     

Synthesis and characterization of oligoproline-based molecular assemblies for light harvesting

Helical oligoproline arrays provide a structurally well-defined environment for building photochemical energy conversion assemblies. The use of solid-phase peptide synthesis (SPPS) to prepare four such arrays, consisting of 16, 17, 18, and 19 amino acid residues, is described here. Each array contains the chromophore [Rub'(2)m](PF(6))(2) (b' = 4,4'-diethylamidocarbonyl-2,2'-bipyridine; m = 4-methyl-2,2'-dipyridine-4'-carboxylic acid) and the electron transfer donor PTZ (phenothiazine). The arrays differ systematically in the distance between the redox-active metal complex and PTZ sites. They have been used in photophysical studies to provide insight into the distance dependence of electron transfer. (J. Am. Chem. Soc. 2004, 126, 14506-14514). This work describes the synthesis, purification, and characterization of the oligoproline arrays, including a general procedure for the synthesis of related arrays.