PC/ABS共混物的PGC-MS定量分析

采用裂解/气相色谱-质谱联用方法(PGC-MS)对制备的一系列已知配比的PC/ABS共混物进行分析。实验比较了650、750℃裂解温度下共混物的裂解质谱总离子流图,选择PC/ABS共混物的快速鉴定的裂解温度为750℃;通过对已知PC/ABS配比的共混物的特征裂解碎片进行定量分析,发现当共混物中ABS和PC的质量比不大于20∶100时,特征裂解碎片苯乙烯与苯酚的峰面积之比与共混物中ABS/PC的配比呈线性关系,该现象可作为PC/ABS共混物定量分析的依据。     

热解析-裂解-气相色谱/质谱联用法测定电子电气产品中的多溴二苯醚

建立了热解析-裂解-气相色谱/质谱法测定电子电气中多溴二苯醚(PBDEs)的方法。采用气相色谱-质谱总离子流和选择离子流对PBDEs进行定性和定量测定。对热解析温度,热解析时间,热解析升温速率和附件初始温度进行了优化,并进行了线性关系、精密度等试验。本方法线性范围200~1000 mg/kg,相关系数为0.995,检出限为50 mg/kg,相对标准偏差小于15%。本方法可直接固体进样,简化了前处理步骤,适用于电子电气产品中PBDEs的测定,满足欧盟Ro HS指令限量的检测要求。     

高分辨热裂解气相色谱/质谱法快速定性检测农产品中的单增李斯特菌

要在高分辨率热裂解气相色谱/质谱(HRPGC/MS)系统中采用选择离子检测法(SIM),建立了准确可靠、灵敏度高、快速简便的检测农产品中单增李斯特菌的方法.裂解条件:起始温度50℃;升温速率20℃/min,裂解室温度230℃;裂解温度650℃;裂解时间为10 s.气相色谱条件:载气为氦气;恒定流速0.9 mL/min;DB-WAXTER毛细管色谱柱;起始温度45℃;保持4min,以6℃/min的速率上升到100℃,然后以10℃/min上升到200℃,接着以12℃/min上升至250℃,并保持25 min.分流比为50∶1.EI离子源.选择色谱保留时间19.056 min,鉴别离子m/z 54,98,用于SIM检测.通过对单增李斯特菌、2种空白农产品和2种不同农产品污染单增李斯特菌的样品检测结果表明,HRPGC/MS方法检测不同黄瓜、牛肉农产品中单增李斯特菌,均能得到很好的反映.本方法分析时间缩短,用保留时间、质谱同时定性,消除了不同种类农产品杂质的干扰,结果准确可靠,选择性和重复性好,适于快速检测农产品中的单增李斯特菌.     

裂解气相色谱-质谱联用法分析聚醚酰亚胺的裂解产物

应用裂解气相色谱及质谱联用法研究了3种聚醚酰亚胺(PEIM′s)的裂解行为,并根据裂解产物的结构及其相对产率推断了裂解的机理。取3种PEIM样品置于石英裂解管中,分别在550℃,650℃,750℃条件下裂解,所得产物用气相色谱-质谱联用法分析。分析中采用DB-5毛细管色谱柱,电子轰击离子源(200℃,70eV)及在m/z 29～500范围内全扫描方式,并用NIST谱库进行检索和用归一化法计算峰面积进行定量。由试验结果可知:选择在750℃进行裂解较好,在此条件下获得主要裂解产物存在的更明显的信息,有利于对产物进行详细分析和鉴定。     

新型潜香化合物3,6-二甲基-2,5-吡嗪二甲酸二薄荷醇酯的热裂解产物

为开发新型高温释放型烟用香料,以2,3,5,6-四甲基吡嗪和薄荷醇为原料,经过酯化反应制备了3,6-二甲基-2,5-吡嗪二甲酸二薄荷醇酯(DPAME).采用在线热裂解-气相色谱-质谱联用技术(Py-GC-MS)在空气氛围和不同的温度(300、600和900 ℃)下,对DPAME进行热裂解研究,裂解产物经GC-MS进行了定性和半定量分析.结果表明,DPAME在300 ℃下裂解产生了多种有致香效果的醛类、薄荷烯和薄荷醇等;在600 ℃和900 ℃下裂解产生了烯烃类、烷基吡嗪、薄荷醇和薄荷烯等香味物质,并且吡嗪类的种类和相对含量在这两个温度下明显增加.结合DPAME的热裂解产物分析和卷烟感官评吸结果,初步推测了其可能的裂解机理.采用该方法可以方便、快速地分离鉴定物质的热裂解产物,为该物质在烟草中的加香应用提供理论依据.     

应用裂解气相色谱对生物质快速裂解反应条件的研究

采用现代化学分析领域中重要的分析方法 -裂解气相色谱法 ,对生物质的快速裂解进行了探索性研究。以杨木木屑为研究对象 ,在裂解温度 40 0～ 80 0℃ ,升温速率 1 0 0℃ s、2 50℃ s、50 0℃ s,挥发性产物停留时间 0 6～4 0s的裂解条件下 ,考察了杨木木屑快速裂解气、液、固三种产物及气相组分的分布规律。实验结果表明 ,气、液、固三种产物所占比例及其组分含量取决于裂解条件 -裂解温度、挥发份停留时间和升温速率 ,杨木在升温速率50 0℃ s、挥发性产物停留时间 0 6s、裂解温度 50 0℃下快速裂解 ,可获得最大的产液率 80 % (含水 )。物料平衡的结果证明了裂解色谱研究方法的有效性和可行性。     

裂解气相色谱-质谱法研究壬酸香草酰胺的热裂解

采用在线热裂解/气相色谱-质谱联用技术(Py/GC-MS)对壬酸香草酰胺(PAVA)的热裂解行为进行了研究,在氦气氛围中考察了不同裂解温度和裂解时间对PAVA裂解的影响,通过GC-MS对裂解产物进行定性和半定量分析。结果表明,随着裂解温度的升高,PAVA裂解率快速提高,裂解产物也进一步增多,当裂解温度达到700℃以上时,可裂解出壬酰胺、2-甲氧基-4-甲基苯酚、1-己烯、壬基腈、壬醛等14种产物。同一温度下随着裂解时间的延长,PAVA的裂解率逐步升高,裂解产物发生了进一步的裂解。根据热裂解产物及主要裂解产物的含量变化,初步推断了PAVA的裂解规律。     

烤烟烟叶和烟梗的热裂解产物的研究

为了加深理解梗丝在卷烟叶组配方中的作用,对比研究了烤烟叶片和烟梗的化学组成以及它们在不同温度下的热裂解产物。一个改进后的热裂解装置被用来模拟卷烟的燃烧行为。采用热裂解仪研究了烤烟叶片和烟梗在大气环境中于300 ℃、600 ℃和900 ℃下的热裂解行为,并采用气相色谱-质谱联用仪对它们的热裂解产物进行分析。结果表明,烤烟烟叶和烟梗的热裂解产物种类随着热裂解温度的增加而增多;在相同热裂解温度条件下,烟叶的热裂解产物种类明显多于烟梗的热裂解产物。     

一些交联聚甲基丙烯酸甲酯材料的热裂—解色—谱质谱分析

本文对５个交联的聚甲基丙烯酸甲酯进行热裂解－色谱－质谱分析研究。裂解温度３７０℃，用ＯＶ－１石英毛细管柱分离，鉴定了交联聚甲基丙烯酸甲酯中少量的共聚单体和助交联剂：甲基丙烯酰胺、氰脲酸三烯丙酯、二甲基丙烯酸－缩二乙二醇酯和二甲基丙烯酸新戊二醇酯。     

在线裂解气相色谱-质谱法研究单琥珀酸薄荷酯的裂解行为

采用在线裂解气相色谱-质谱联用技术对单琥珀酸薄荷酯的裂解行为进行了研究。在氦气氛围中,分别在300、400、500、600、700、800和900℃下对单琥珀酸薄荷酯进行热裂解,并通过毛细管气相色谱-质谱对裂解产物进行了定性和半定量分析。共鉴定出薄荷醇、p-薄荷-3-烯和琥珀酸等75种裂解产物。结果表明,单琥珀酸薄荷酯在700℃以下裂解出薄荷醇、p-薄荷-3-烯和3-甲基-6-异丙基环己烯等具有致香和清凉作用的物质;而700℃以上没有释放出致香物质。随着裂解温度的升高,裂解产物越来越复杂,有害物质如苯、甲苯、蒽和荧蒽等的含量也逐渐增加。此方法可直接进样,重现性好(相对标准偏差≤2.01%)。根据裂解产物的种类及相对含量变化规律,探讨了裂解成分的形成机理。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.