Gradients at a curved shock in reacting flow

The inviscid equations of motion for the flow at the downstream side of a curved shock are solved for the shock–normal derivatives. Combining them with the shock–parallel derivatives yields gradients and substantial derivatives. In general these consist of two terms, one proportional to the rate of removal of specific enthalpy by the reaction, and one proportional to the shock curvature. Results about the streamline curvature show that, for sufficiently fast exothermic reaction, no Crocco point exists. This leads to a stability argument for sinusoidally perturbed normal shocks that relates to the formation of the structure of a detonation wave. Application to the deflection–pressure map of a streamline emerging from a triple shock point leads to the conclusion that, for non–reacting flow, the curvature of the Mach stem and reflected shock must be zero at the triple point, if the incident shock is straight. The direction and magnitude of the gradient at the shock of any flow quantity may be written down using the results. The sonic line slope in reacting flow serves as an example. Extension of the results – derived in the first place for plane flow – to three dimensions is straightforward. Received 12 February 1997 / Accepted 10 June 1997     

Numerical modeling the dynamics of flow in explosion above a surface

The hydrodynamics of processes occurring in explosion of condensed explosives in air is considered. The physical model, computation technique, and results of simulation of a two-dimensional hydrodynamic flow arising in explosion of cylindrical charges are discussed. In this case, the explosions are considered at some distance above the ground. To close the gas-dynamics equations, the Jones–Wilkins–Lee equation of state is used. The results of calculation allow one to obtain a detailed space–time pattern of the arising flow and to study the origination, propagation, and subsequent attenuation of shock waves. Cylindrical charges of the same mass but with different diameter-to-length ratios are considered. It is shown that the charge shape can render essential influence on dynamics of flow and the parameters of shock waves (in the near and medium fields of explosion).     

The flow field near the triple point in steady shock reflection

This paper investigates the flow field near three intersecting shock waves appearing in steady Mach reflection. Results of numerical computations reveal a “von Neumann Paradox”—like feature for weak shock waves, in which the flow field between the reflected and the Mach stem is smooth with no distinct slip flow region and changes rather smoothly. An analytical solution of the Navier–Stokes equations constructed using a polar–coordinate system gives a flow field with the same properties as the numerical simulation.     

Numerical simulation of shock wave propagation in microchannels using continuum and kinetic approaches

Numerical simulations of shock wave propagation in microchannels and microtubes (viscous shock tube problem) have been performed using three different approaches: the Navier–Stokes equations with the velocity slip and temperature jump boundary conditions, the statistical Direct Simulation Monte Carlo method for the Boltzmann equation, and the model kinetic Bhatnagar–Gross–Krook equation with the Shakhov equilibrium distribution function. Effects of flow rarefaction and dissipation are investigated and the results obtained with different approaches are compared. A parametric study of the problem for different Knudsen numbers and initial shock strengths is carried out using the Navier–Stokes computations.      

Numerical analysis of pressure oscillations over axisymmetric spiked blunt bodies at Mach 6.80

The pressure oscillations over a forward facing spike attached to an axisymmetric blunt body are simulated by solving time-dependent compressible Navier–Stokes equations. The governing fluid flow equations are discretized in spatial coordinates employing a finite volume approach which reduces the equations to semidiscretized ordinary differential equations. Temporal integration is performed using the two-stage Runge–Kutta time stepping scheme. A global time step is used to obtain a time-accurate numerical solution. The numerical computation is carried out for a freestream Mach number of 6.80 and for spike length to hemispherical diameter ratios of 0.5, 1.0 and 2.0. The flow features around the spiked blunt body are characterized by a conical shock wave emanating from the spike tip, a region of separated flow in front of the hemispherical cap, and the resulting reattachment shock wave. Comparisons of the numerical results are made with the available experimental results, such as schlieren pictures and the surface pressure distribution along the spiked blunt body. They are found to be in good agreement. Spectral analysis of the computed pressure oscillations are performed employing fast Fourier transforms. The surface pressure oscillations over the spike and phase plots exhibit a behaviour analogous to that of the Van der Pol equation for a self-sustained oscillatory flow. Received 28 February 2001 / Accepted 17 January 2002     

Approximate analytical calculation of the mach configuration of steady shock waves in a plane constricting channel

An approximate analytical model for calculation of the parameters of a steady gas flow inside a plane constricting channel formed by two symmetrically positioned wedges is suggested. A Mach configuration of shock waves (triple point) is formed in the channel when the wedge angles are larger than some critical value. The flow calculation in a constricting channel reduces to the solution of the iterative problem for a system of nonlinear algebraic equations. The configurations of shock waves, the slipstream, and the sonic line are described by the proposed model of a gas flow. A comparison of the results obtained using this model allows a fairly accurate calculation of the Mach stem and the length of the subsonic-flow region. Institute of Theoretical and Applied Mechanics, Siberian Division, Russian Academy of Sciences, Novosibirsk 630090. Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 39, No. 3, pp. 52–58, May–June, 1998.     

Transonic Shocks in Compressible Flow Passing a Duct for Three-Dimensional Euler Systems

In this paper we study the transonic shock in steady compressible flow passing a duct. The flow is a given supersonic one at the entrance of the duct and becomes subsonic across a shock front, which passes through a given point on the wall of the duct. The flow is governed by the three-dimensional steady full Euler system, which is purely hyperbolic ahead of the shock and is of elliptic–hyperbolic composed type behind the shock. The upstream flow is a uniform supersonic one with the addition of a three-dimensional perturbation, while the pressure of the downstream flow at the exit of the duct is assigned apart from a constant difference. The problem of determining the transonic shock and the flow behind the shock is reduced to a free-boundary value problem. In order to solve the free-boundary problem of the elliptic–hyperbolic system one crucial point is to decompose the whole system to a canonical form, in which the elliptic part and the hyperbolic part are separated at the level of the principal part. Due to the complexity of the characteristic varieties for the three-dimensional Euler system the calculus of symbols is employed to complete the decomposition. The new ingredient of our analysis also contains the process of determining the shock front governed by a pair of partial differential equations, which are coupled with the three-dimensional Euler system. The paper is partially supported by National Natural Science Foundation of China 10531020, the National Basic Research Program of China 2006CB805902, and the Doctorial Foundation of National Educational Ministry 20050246001.     

Numerical analysis of supersonic viscous gas flow past axisymmetric nonpointed bodies

Supersonic viscous homogeneous gas flow past axisymmetric smooth nonpointed bodies is analyzed numerically for widely varying Mach and Reynolds numbers and flow geometry. The initial equations of a viscous shock layer are solved by the stabilization method. The effect of the determining parameters on the flow character and the heat transfer distribution along the surface is analyzed. The accuracy and domain of applicability of several approximate approaches to the solution of the problem are estimated. Tomsk. Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No. 1, pp. 107–117, January–February, 1999. This research was carried out with financial support from the Russian Foundation for Basic Research (project No. 98-01-00298).     

Characteristics of unsteady type IV shock/shock interaction

Characteristics of the unsteady type IV shock/shock interaction of hypersonic blunt body flows are investigated by solving the Navier–Stokes equations with high-order numerical methods. The intrinsic relations of flow structures to shear, compression, and heating processes are studied and the physical mechanisms of the unsteady flow evolution are revealed. It is found that the instantaneous surface-heating peak is caused by the fluid in the “hot spot” generated by an oscillating and deforming jet bow shock (JBS) just ahead of the body surface. The features of local shock/boundary layer interaction and vortex/boundary layer interaction are clarified. Based on the analysis of flow evolution, it is identified that the upstream-propagating compression waves are associated with the interaction of the JBS and the shear layers formed by a supersonic impinging jet, and then the interaction of the freestream bow shocks and the compression waves results in entropy and vortical waves propagating to the body surface. Further, the feedback mechanism of the inherent unsteadiness of the flow field is revealed to be related to the impinging jet. A feedback model is proposed to reliably predict the dominant frequency of flow evolution. The results obtained in this study provide physical insight into the understanding of the mechanisms relevant to this complex flow.     

On the applicability of some approximate similitude laws in hypersonic aerodynamics

The range of applicability of some similitude laws for heat transfer, friction and drag coefficients is discussed on the basis of numerical solutions of the complete viscous shock layer equations describing hypersonic flow past blunt bodies. Moscow. Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No.2, pp. 121–130, March–April, 1994.     

Numerical simulation of supersonic flow past reentry capsules

The flow fields over ARD (ESA's atmospheric reentry demonstrator), OREX (orbital reentry experiments) and spherically blunted cone-flare reentry configurations are numerically obtained by solving time-dependent, axisymmetric, compressible Navier–Stokes equations for freestream Mach numbers range of 1.2–6.0. The fluid dynamics are discretized in spatial coordinates employing a finite volume approach which reduces the governing equations to semi discretized ordinary differential equations. Temporal integration is performed using the multistage Runge–Kutta time-stepping scheme. A local time step is used to achieve steady-state solution. The numerical simulation is carried out on a structured grid. The flow-field features around the reentry capsule, such as bow shock wave, sonic line, expansion fan and recirculating flow in the base region are obtained. A good agreement is found between the calculated value of aerodynamic drag coefficient of the spherically blunted cone/fare reentry configuration with the experimental data. The effects of geometrical parameters, such as radius of the spherical cap, half cone angle, with sharp shoulder edge and with smooth shoulder edge on the flow-field have been numerically investigated for various reentry configuration which will be useful for optimization of the reentry capsule. PACS 47.11.Df, 47.40.Ki     

The blunt-body problem in a nonuniform hypersonic viscous gas flow

The laws of heat transfer associated with the interaction of underexpanded supersonic gas jets and obstacles or blunt bodies have been investigated, for example, in [1–3]. Similar problems of nonuniform flow occur when bodies move in the wake behind other bodies; however, in this case the laws of heat transfer have so far received little attention [4–8]. It has been established that for a certain Reynolds number and flow nonuniformity parameters a zone of reverse-circulatory flow develops near the front of the blunt body. However, the conditions of transition to separated flow have not been determined. This paper presents a self-similar solution of the equations of the viscous shock layer near the stagnation line in supersonic flow past an axisymmetric blunt body located behind another body. On the basis of this solution a separationless flow criterion is proposed. The effect of the nonuniformity and the Reynolds number on the shock standoff distance, the convective heat flux and the friction drag of the blunt body is investigated. Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 120–125, November–December, 1986. In conclusion the authors wish to thank I. G. Eremeitsev for useful suggestions and G. A. Tirskii for discussing their work.     

The shock–vortex interaction patterns affected by vortex flow regime and vortex models

We have used a third-order essentially non-oscillatory method to obtain numerical shadowgraphs for investigation of shock–vortex interaction patterns. To search different interaction patterns, we have tested two vortex models (the composite vortex model and the Taylor vortex model) and as many as 47 parametric data sets. By shock–vortex interaction, the impinging shock is deformed to a S-shape with leading and lagging parts of the shock. The vortex flow is locally accelerated by the leading shock and locally decelerated by the lagging shock, having a severely elongated vortex core with two vertices. When the leading shock escapes the vortex, implosion effect creates a high pressure in the vertex area where the flow had been most expanded. This compressed region spreads in time with two frontal waves, an induced expansion wave and an induced compression wave. They are subsonic waves when the shock–vortex interaction is weak but become supersonic waves for strong interactions. Under a intermediate interaction, however, an induced shock wave is first developed where flow speed is supersonic but is dissipated where the incoming flow is subsonic. We have identified three different interaction patterns that depend on the vortex flow regime characterized by the shock–vortex interaction.      

Vanishing Viscosity Limit of the Compressible Navier–Stokes Equations for Solutions to a Riemann Problem

We study the vanishing viscosity limit of the compressible Navier–Stokes equations to the Riemann solution of the Euler equations that consists of the superposition of a shock wave and a rarefaction wave. In particular, it is shown that there exists a family of smooth solutions to the compressible Navier–Stokes equations that converges to the Riemann solution away from the initial and shock layers at a rate in terms of the viscosity and the heat conductivity coefficients. This gives the first mathematical justification of this limit for the Navier–Stokes equations to the Riemann solution that contains these two typical nonlinear hyperbolic waves.     

Near-resonance highly nonlinear gas oscillations in tubes

Near-resonance highly nonlinear ideal perfect gas oscillations in tubes are studied numerically for boundary conditions of various types. The oscillations are initiated by weak periodic perturbations at one end of the tube. As distinct from earlier studies [1–10], the oscillation amplitudes were not assumed to be small and the entropy increase at the shock waves formed was taken into account. Periodic flow regimes result as a limit of the solution of a Cauchy problem for one-dimensional time-dependent gasdynamic equations. The frequency responses of the oscillations under consideration are determined for boundary conditions of various types. It is shown that in specific cases the attainment of a periodic regime is accompanied by the appearance of long-wave modulations. The “repeated resonance” effect is revealed. This is due to the change in the tube's natural acoustic frequency, which takes place during the heating of the gas in the tube by the shock waves traveling in it. Moscow. Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No. 4, pp. 150–157, July–August, 1994.     

Comparison of different models for non-equilibrium CO2 flows in a shock layer near a blunt body

The paper presents results of a numerical simulation of a supersonic two-dimensional (2D) viscous flow containing CO₂ molecules near a spacecraft entering the Mars atmosphere. The gas–dynamic equations in the shock layer are coupled to the equations of non-equilibrium vibrational and chemical kinetics in the five-component mixture CO₂/CO/O₂/C/O. Transport and relaxation processes in the flow are studied on the basis of the rigorous kinetic theory methods; the developed transport algorithms are incorporated in the numerical scheme. The influence of the vibrational excitation of CO₂ and chemical reactions on the gas flow parameters and heat transfer is analyzed. The obtained results are compared with those found using two simplified models based on the two-temperature and one-temperature vibrational distributions in CO₂. The accuracy of the simplified models and the limits of their validity within the shock layer are evaluated. The effect of bulk viscosity in a flow near a re-entry body is discussed. The role of different diffusion processes, chemical reactions, and surface catalytic properties in a flow of the considered mixture in the shock layer is estimated.     

Modelling gas dynamics in 1D ducts with abrupt area change

Most gas dynamic computations in industrial ducts are done in one dimension with cross-section-averaged Euler equations. This poses a fundamental difficulty as soon as geometrical discontinuities are present. The momentum equation contains a non-conservative term involving a surface pressure integral, responsible for momentum loss. Definition of this integral is very difficult from a mathematical standpoint as the flow may contain other discontinuities (shocks, contact discontinuities). From a physical standpoint, geometrical discontinuities induce multidimensional vortices that modify the surface pressure integral. In the present paper, an improved 1D flow model is proposed. An extra energy (or entropy) equation is added to the Euler equations expressing the energy and turbulent pressure stored in the vortices generated by the abrupt area variation. The turbulent energy created by the flow–area change interaction is determined by a specific estimate of the surface pressure integral. Model’s predictions are compared with 2D-averaged results from numerical solution of the Euler equations. Comparison with shock tube experiments is also presented. The new 1D-averaged model improves the conventional cross-section-averaged Euler equations and is able to reproduce the main flow features.     

Modelling detonation waves in condensed energetic materials: multiphase CJ conditions and multidimensional computations

A hyperbolic multiphase flow model with a single pressure and a single velocity but several temperatures is proposed to deal with the detonation dynamics of condensed energetic materials. Temperature non-equilibrium effects are mandatory in order to deal with wave propagation (shocks, detonations) in heterogeneous mixtures. The model is obtained as the asymptotic limit of a total non-equilibrium multiphase flow model in the limit of stiff mechanical relaxation only (Kapila et al. in Phys Fluids 13:3002–3024, 2001). Special attention is given to mass transfer modelling, that is obtained on the basis of entropy production analysis in each phase and in the system (Saurel et al. in J Fluid Mech 607:313–350, 2008). With the help of the shock relations given in Saurel et al. (Shock Waves 16:209–232, 2007) the model is closed and provides a generalized ZND formulation for condensed energetic materials. In particular, generalized CJ conditions are obtained. They are based on a balance between the chemical reaction energy release and internal heat exchanges among phases. Moreover, the sound speed that appears at sonic surface corresponds to the one of Wood (A textbook of sound, G. Bell and Sons LTD, London, 1930) that presents a non-monotonic behaviour versus volume fraction. Therefore, non-conventional reaction zone structure is observed. When heat exchanges are absent, the conventional ZND model with conventional CJ conditions is recovered. When heat exchanges are involved interesting features are observed. The flow behaviour presents similarities with non ideal detonations (Wood and Kirkwood in J Chem Phys 22:1920–1924, 1950) and pathological detonations (Von Neuman in Theory of detonation waves, 1942; Guenoche et al. in AIAA Prog Astron Aeronaut 75: 387–407, 1981). It also present non-conventional behaviour with detonation velocity eventually greater than the CJ one. Multidimensional resolution of the corresponding model is then addressed. This poses serious difficulties related to the presence of material interfaces and shock propagation in multiphase mixtures. The first issue is solved by an extension of the method derived in Saurel et al. (J Comput Phys 228(5):1678–1712, 2009) in the presence of heat and mass transfers. The second issue poses the difficult mathematical question of numerical approximation of non-conservative systems in the presence of shocks associated to the physical question of energy partition among phases for a multiphase shock. A novel approach is used, based on extra evolution equations used to retain the information of the material initial state. This method insures convergence in the post-shock state. Thanks to these various theoretical and numerical ingredients, one-dimensional and multidimensional unsteady detonation waves computations are done, eventually in the presence of material interfaces. Convergence of the numerical hyperbolic solver against ZND multiphase solution is reached. Material interfaces, shocks, detonations are solved with a unified formulation where the same equations are solved everywhere with the same numerical scheme.     

Shock wave standoff distance for a sphere slightly above Mach one

This paper describes a numerical simulation of bow shock formation ahead of a sphere at steady supersonic flow in the Mach number range of 1.025–1.20. Turbulent viscous flow results are presented using the Spalart–Allmaras turbulence model. The purpose of this study is to determine the shock standoff distance for a spherical projectile at slightly supersonic free flight speeds. Results are compared to experimental data, including double exposure holographic interferograms obtained from a 40 mm polycarbonate sphere launched by a light gas gun. The shock standoff distance was determined from the interferograms. The present numerical simulations were found to agree with previously published data, and reached down to M = 1.025—a range where almost no previously published data exists. The computed flow structure and shock wave locations agree well with recently obtained free-flight interferograms.