Synthesis and characterization of a new monophosphate (C<Subscript>6</Subscript>H<Subscript>16</Subscript>N<Subscript>2</Subscript>)(H<Subscript>2</Subscript>PO<Subscript>4</Subscript>)<Subscript>2</Subscript>

Chemical preparation, crystal structure, and NMR spectroscopy of a new trans-2,5-dimethylpiperazinium monophosphate are given. This new compound crystallizes in the triclinic system, with the space group P-1 and the following parameters: a = 6.5033(3), b = 7.6942(4), c = 8.1473(5) Å, α = 114.997(3), β = 92.341(3), γ = 113.136(3), V = 329.14(3) ų, Z = 1, and D_x = 1.565 g cm^?3. The crystal structure has been determined and refined to R = 0.030 and R _w(F ²) = 0.032 using 1558 independent reflections. The structure can be described as infinite [H₂PO₄] _n ^n? chains with (C₆H₁₆N₂)²⁺ organic cations anchored between adjacent polyanions to form columns of anions and cations running along the b axis. This compound has also been investigated by IR, thermal, and solid-state, ¹³C and ³¹P MAS NMR spectroscopies and Ab initio calculations.     

Possible role of hydrolytic enzymes (Sap,Kex2) in <Emphasis Type="Italic">Candida albicans</Emphasis> response to aromatic compounds bearing a sulfone moiety

Hydrolytic enzymes e.g., Saps and Kex2 are, due to their role in Candida virulence, considered important targets for new synthetic inhibitors. MICTI and MICPI values indicate that disruption of SAP1-3 significantly increases the resistance of Candida mutants to β-ketosulfone (1). Contrariwise, sap123Δ showed sensitive phenotype to halogenated methylphenyl sulfone (2). Anticandidal potency of 2 differed in the Candida cells of kex2Δ. Sulfone is the most effective agent against the Candida albicans kex2Δ double mutant (MICTI of 0.5 µg mL^?1). Up-regulation of KEX2 mediated the resistance of sap4-6Δ towards 2. Both sulfones tested reduced the adhesion of the wild type cells significantly (P ≤ 0.05). Contrariwise, sap123Δ showed significantly enhanced adhesion capability when 1 was used (P ≤ 0.05). Both sulfones had weak fungicidal effect on mature C. albicans biofilms. It was shown that the uptake of IP correlates with the membrane perturbations caused by 1 in the blastoconidial cells. Sulfones were found to disturb the basic developmental phases of biofilm growth: adhesion and morphogenesis. Altered KEX2 levels for 1 can be caused by the compensatory mechanism for the maintenance of cell wall integrity and morphogenesis. KEX2 decreases the antifungal activity of sulfones. Sulfones affecting the crucial virulence factors of Candida can even eliminate these fungal infections.     

Synthesis,structural, spectral,thermal and comparative biological activity studies of [V<Subscript>2</Subscript>O<Subscript>2</Subscript>(SO<Subscript>4</Subscript>)<Subscript>2</Subscript>(H<Subscript>2</Subscript>O)<Subscript>6</Subscript>]

The hydrothermal reaction of a mixture of V₂O₅, VCl₃, 2,5-pyridinedicarboxylic acid and diluted H₂SO₄ for 68 h at 180°C gives a blue colored solution which yields prismatic blue crystals of IV ₂ ^IV O₂(SO₄)₂(H₂O)₆] (1) in 32% yield (based on V). Complex 1 was investigated by means of elemental analysis (C, H and S), TGA, FT-IR, manganometric titration, Single Crystal X-ray Diffraction Methods and also comparative antimicrobial activities. Crystal data for the compound: monoclinic space group P2₁/c and unit cell parameters are a = 7.3850(12) Å, b = 7.3990(7) Å, c = 12.229(2) Å, β = 108.976(12)° and Z = 2. Although structure of 1 as a natural mineral has been previously determined, this work covers new preparation method and full characterization of 1 along with comparison of antibacterial activity between 1 and the commercial vanadium(IV) oxide sulfate hydrate compounds, VOSO₄ · xH₂O (Riedel-de Haën and Alfa Aesar brand names). 1 was evaluated for the antimicrobial activity against gram-positive, gram-negative bacteria, yeasts and mould compared with the commercial VOSO₄ · xH₂O compounds. 1 showed weak activity against bacteria Bacillus cereus, Nocardia asteroides and yeast Candida albicans. A good antimicrobial activity was recorded against Cirtobacter freundii (15 mm). There are only a few reproducible well-defined vanadium(IV) starting materials to use for exploring the synthesis of new materials. VCl₄, VO(acac)₂, VOSO₄ · xH₂O and [V(IV)OSO₄(H₂O)₄] · SO₄ · [H₂N(C₂H₄)₂NH₂] are common starting materials for such applications. In addition to these compounds, 1 can be used as an oxovanadium precursor.     

Synthesis,crystal structure of a new tetranuclear Ni<Stack><Subscript>2</Subscript><Superscript>II</Superscript></Stack>Cu<Stack><Subscript>2</Subscript><Superscript>II</Superscript></Stack> complex containing a macrocyclic ligand

The first inorg/organic hybrid complex incorporating the macrocyclic oxamide, of formula [(NiL)₂Cu₂(μ-NSC)₂(NSC)₂] (1), (NiL, H₂L = 2, 3-dioxo-5,6,14,15-dibenzo-1,4,8,12-tetraazacyclo-pentadeca-7,13-dien), have been synthesized and structurally characterized. The crystals crystallize in the triclinic system, space group P-1, for (1) a = 8.319(3) Å, b = 10.434(4) Å, c = 14.166(5) Å, a = 107.030(5)°, β  =  91.257(5)°, γ = 107.623(5)°. The complex involved both bridging N, S-ligand, and oxamide ligand, C–H?S interactions and NCS → Ni weak coordination interactions making the complex superamolecular.     

Non-isothermal crystallization kinetics of Ti<Subscript>20</Subscript>Zr<Subscript>20</Subscript>Hf<Subscript>20</Subscript>Be<Subscript>20</Subscript>(Cu<Subscript>50</Subscript>Ni<Subscript>50</Subscript>)<Subscript>20</Subscript> high-entropy bulk metallic glass

The crystallization transformation kinetics of Ti₂₀Zr₂₀Hf₂₀Be₂₀(Cu₅₀Ni₅₀)₂₀ high-entropy bulk metallic glass under non-isothermal conditions are investigated using differential scanning calorimetry. The alloy shows two distinct crystallization events. The activation energies of the crystallization events are determined using Kissinger, Ozawa and Augis–Bennett methodologies. Further, we observe that similar values are obtained using the three equations. The activation energy of the initial crystallization event is observed to be slightly small as compared to that of the second event. This implies that the initial crystallization event may have been easier to be occurred. The local activation energy (E(x)) maximizes in the initial stage of crystallization and keeps dropping in subsequent crystallization process. The non-isothermal crystallization kinetics are further analyzed using the modified Johnson–Mehl–Avrami (JMA) equation. Further, the Avrami exponent values are observed to be 1.5 < n(x) < 2.5 for approximately the entire period of the initial crystallization event and for most instances (0.1 < x < 0.6) of the second crystallization event, which implies that the mechanism of crystallization is significantly controlled by diffusion-controlled two- and three-dimensional growth along with a decreasing nucleation rate.     

Synthesis,structural, and electrochemical properties of NaCo(PO<Subscript>3</Subscript>)<Subscript>3</Subscript> cathode for sodium-ion batteries

A new Co-base sodium metaphosphate compound, NaCo(PO₃)₃, has been synthesized here by solid-state method. The crystal structure is refined by the Rietveld method, and the results reveal that NaCo(PO₃)₃ has an orthorhombic structure with the space group of P2 ₁ 2 ₁ 2 ₁ and lattice parameters of a = 14.2453(2) Å, b = 14.2306(1) Å, and c = 14.2603(2) Å. Its typical morphology and chemical composition are confirmed by scanning electron microscopy (SEM) and energy-dispersive spectrometry (EDS). The valence states of all elements and the internal/external vibrational modes of NaCoP₃O₉ compound are measured by X-ray photoelectron and vibrational spectrum, where a typical feature of the (PO₃)^? polyanion group is observed. Meanwhile, the electrochemical properties of NaCo(PO₃)₃ cathode for sodium-ion batteries are also elevated and an initial discharge capacity of 33.8 mAh/g can be obtained at 0.05 C within 1.5–4.2 V. After 20 cycles, a discharge capacity of 26.7 mAh/g can be obtained and a well-kept oxidation–reduction plateau is still observed for NaCo(PO₃)₃ cathode, indicating the good reversibility of this metaphosphate electrode.     

Design,synthesis and therapeutic potential of 3-(2-(1<Emphasis Type="Italic">H</Emphasis>-benzo[<Emphasis Type="Italic">d</Emphasis>]imidazol-2-ylthio)acetamido)-<Emphasis Type="Italic">N</Emphasis>-(substituted phenyl)benzamide analogues

Background

The emergence of bacterial resistance is a major public health problem. It is essential to develop and synthesize new therapeutic agents with better activity. The mode of actions of certain newly developed antimicrobial agents, however, exhibited very limited effect in treating life threatening systemic infections. Therefore, the advancement of multi-potent and efficient antimicrobial agents is crucial to overcome the increased multi-drug resistance of bacteria and fungi. Cancer, which remains as one of the primary causes of deaths and is commonly treated by chemotherapeutic agents, is also in need of novel and efficacious agents to treat resistant cases. As such, a sequence of novel substituted benzamides was designed, synthesized and evaluated for their antimicrobial and anticancer activities.

Methodology

All synthesized compounds were characterized by IR, NMR, Mass and elemental analysis followed by in vitro antimicrobial studies against Gram-positive (Staphylococcus aureus), Gram-negative (Salmonella typhi and Klebsiella pneumoniae) bacterial and fungal (Candida albicans and Aspergillus niger) strains by the tube dilution method. The in vitro anticancer evaluation was carried out against the human colorectal carcinoma cell line (HCT116), using the Sulforhodamine B assay.

Results, discussion and conclusion

Compound W6 (MIC_{sa, st, kp}?=?5.19 µM) emerged as a significant antibacterial agent against all tested bacterial strains i.e. Gram-positive (S. aureus), Gram-negative (S. typhi, K. pneumoniae) while compound W1 (MIC_{ca, an}?=?5.08 µM) was most potent against fungal strains (A. niger and C. albicans) and comparable to fluconazole (MIC?=?8.16 µM). The anticancer screening demonstrated that compound W17 (IC₅₀?=?4.12 µM) was most potent amongst the synthesized  compounds and also more potent than the standard drug 5-FU (IC₅₀?=?7.69 µM).

Open image in new window

     

Crystal structure of KPb<Subscript>2</Subscript>Cl<Subscript>5</Subscript> and KPb<Subscript>2</Subscript>Br<Subscript>5</Subscript>

The KPb₂Cl₅ and KPb₂Br₅ crystals are monoclinic (P2₁/c) with a microtwinned structure. X-ray analysis of chloride resulted in the parameters a = 8.854(2) Å, b = 7.927(2) Å, c = 12.485(3) Å; β = 90.05(3)°, d_calc = 4.78(1) g/cm³ (STOE STADI4, MoK_α, 2θ_max = 80°), R₁ = 0.0702 for 4094 F ≥ 4 σ(F) reflections. For bromide, a = 9.256(2) Å, b = 8.365(2) Å, c = 13.025(3) Å; β = 90.00(3)°, d_calc = 5.62(1) g/cm³ (Bruker P4, MoK_α, 2θ_max = 70°), R₁ = 0.0692 for 3076 F ≥ 4 (F) reflections.     

Thermochemical Properties of Dissolution of Nicotinic Acid C<Subscript>6</Subscript>H<Subscript>5</Subscript>NO<Subscript>2</Subscript>(s) in Aqueous Solution

Nicotinic acid (also known as niacin) was recrystallized from anhydrous ethanol. X-ray crystallography was applied to characterize its crystal structure. The crystal belongs to the monoclinic system, space group P2₍₁₎/c. The crystal cell parameters are a = 0.71401(4) nm, b = 1.16195(7) nm, c = 0.71974(6) nm, α = 90°, β = 113.514(3)°, γ = 90° and Z = 4. Molar enthalpies of dissolution of the compound, at different molalities m/(mol·kg^?1) were measured with an isoperibol solution–reaction calorimeter at T = 298.15 K. The molar enthalpy of solution at infinite dilution was calculated, according to Pitzer’s electrolyte solution model and found to be \( \Delta_{\text{sol}} H_{m}^{\infty } = ( 2 7. 3 \pm 0. 2) \) kJ·mol^?1 and Pitzer’s parameters (\( \beta_{{\text{MX}}}^{{\text{(0)}L}} \), \( \beta_{{\text{MX}}}^{{\text{(1)}L}} \) and \( C_{{\text{MX}}}^{\phi L} \)) were obtained. The values of apparent relative molar enthalpies (\( {}^{\phi }L \)) and relative partial molar enthalpies (\( \overline{{L_{2} }} \) and \( \overline{{L_{1} }} \)) of the solute and the solvent at different molalities were derived from the experimental enthalpy of dissolution values of the compound. Also, the standard molar enthalpy of formation of the anion \( {\text{C}}_{ 6} {\text{H}}_{ 4} \text{NO}_{2}^{-} \) in aqueous solution was calculated to be \( {\Delta_{\text{f}}^{} H}_{\text{m}}^{\text{o}} ({\text{C}}_{ 6} {\text{H}}_{ 4} {\text{NO}}_{2}^{-} \text{,aq}) = - \left( {603.2 \pm 1.2} \right)\;{\text{kJ}}{\cdot}{\text{mol}}^{-1} \).     

<Emphasis Type="Italic">cis</Emphasis>-Dioxomolybdenum(VI) complexes of sterically encumbered phenol-based tetradentate N<Subscript>2</Subscript>O<Subscript>2</Subscript> ligands: Structural,spectroscopic, and electrochemical studies

Two cis-dioxomolybdenum(VI) complexes [MoO₂L] (L: L ¹, 2 and L: L ², 3) in a phenol-based sterically encumbered N₂O₂ ligand environment have been synthesized, and their crystallographic characterizations are reported. The orange crystals of 2 are monoclinic, space group P2₁/a with unit cell dimensions as a=16.2407(17) Å, b=7.2857(8) Å, c=18.400(2) Å, β=98.002(9)°, Z=4, and d _cal=1.486 g cm^?3. The light orange crystals of 3, however, are orthorhombic, space group, Pbcn, with unit cell dimensions a=8.3110(12) Å, b=12.637(3) Å, c=34.673(5) Å, Z=4, and d _cal=1.187 g cm^?3. The structures were refined by a full-matrix least-squares procedure on F ² to a final R=0.046 (0.055 for 3) using 4944 (3677) all independent data. In both the cases, the Mo atom exists in a distorted octahedral geometry defined by a N₂O₄ donor set, which features a cis-Mo(–O)₂ and a trans-Mo(OPh)₂ arrangement. Compound 2 undergoes a quasireversible one-electron reduction at ?1.3 V vs Ag/AgCl reference due to Mo^VIO₂/Mo^VO₂ electron transfer and thus providing a rare example of steric solution to the comproportionation–dimerization problem encountered frequently in the development of valid biomimetic models for the active sites of oxomolybdenum enzymes.     

Thermal properties,phase transitions,vibrational and reorientational dynamics of [Mn(NH<Subscript>3</Subscript>)<Subscript>6</Subscript>](NO<Subscript>3</Subscript>)<Subscript>2</Subscript>

[Mn(NH₃)₆](NO₃)₂ crystallizes in the cubic, fluorite (C1) type crystal lattice structure (Fm \( \overline{3} \) m) with a = 11.0056 Å and Z = 4. Two phase transitions of the first-order type were detected. The first registered on DSC curves as a large anomaly at T _C1 ^h  = 207.8 K and T _C1 ^c  = 207.2 K, and the second registered as a smaller anomaly at T _C2 ^h  = 184.4 K and T _C2 ^c  = 160.8 K (where the upper indexes h and c denote heating and cooling of the sample, respectively). The temperature dependence of the full width at half maximum of the band associated with the δ_s(HNH)F_1u mode suggests that the NH₃ ligands in the high temperature and intermediate phase reorientate quickly with correlation times in the order of several picoseconds and with activation energy of 9.9 kJ mol^?1. In the phase transition at T _C2 ^c probably only a some of the NH₃ ligands stop their reorientation, while the remainders continue to reorientate quickly with activation energy of 7.7 kJ mol^?1. Thermal decomposition of the investigated compound starts at 305 K and continues up to 525 K in four main stages (I–IV). In stage I, ²/₆ of all NH₃ ligands were seceded. Stages II and III are connected with an abruption of the next ²/₆ and ¹/₆ of total NH₃, respectively, and [Mn(NH₃)](NO₃)₂ is formed. The last molecule of NH₃ per formula unit is freed at stage IV together with the simultaneous thermal decomposition of the resulting Mn(NO₃)₂ leading to the formation of gaseous products (O₂, H₂O, N₂ and nitrogen oxides) and solid MnO₂.     

Hydrogen bonding and structural complexity in the Cu<Subscript>5</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>(OH)<Subscript>4</Subscript> polymorphs (pseudomalachite,ludjibaite, reichenbachite): combined experimental and theoretical study

Hydrogen bonding in the Cu₅(PO₄)₂(OH)₄ polymorphs pseudomalachite, ludjibaite and reichenbachite has been studied by low-temperature single-crystal X-ray diffraction (XRD; pseudomalachite) and solid-state density functional theory (DFT; pseudomalachite, ludjibaite, reichenbachite) calculations. Pseudomalachite at 100 K is monoclinic, P2₁/c, a = 4.4436(4), b = 5.7320(5), c = 16.9300(15) Å, β = 91.008(8)°, V = 431.15(7) ų and Z = 2. The structure has been refined to R ₁ = 0.025 for 1383 unique observed reflections with |F _o| ≥ 4σ_F. DFT calculations were done with the CRYSTAL14 software package. For pseudomalachite, the difference between the calculated and experimental H sites does not exceed 0.152 Å. Structural configurations around hydroxyl groups in all three polymorphs show many similarities. Each OH5 group is involved in a three-center (bifurcated) hydrogen bond with the H···A distances in the range of 2.141–2.460 Å and the D–H···A angles in the range of 122.41°–139.30°, whereas each OH6 group forms a four-center (trifurcated) bond (H···A = 2.093–2.593 Å; D–H···A = 122.79°–137.71°). The crystal structures of the Cu₅(PO₄)₂(OH)₄ polymorphs are based on three-dimensional frameworks of Cu and P polyhedra. The copper-centered octahedra share edges to form two-dimensional layers parallel to (100) in all three structures. The layers have square voids above and beneath PO₄ tetrahedra that link adjacent layers by sharing O atoms with two CuO₆ octahedra each. From the topological point of view, none of the polymorphs can be obtained from another by a displacive transformation, and therefore pseudomalachite, ludjibaite and reichenbachite can be viewed as combinatorial polymorphs. According to information-based structural complexity considerations, the three phases are very similar in their configurational entropies and preferential crystallization of one phase over another cannot be entropy driven and is probably governed by other mechanisms that may involve such factors as structures of prenucleation clusters, chemical admixtures, etc.     

Structural investigation of [Au(en)<Subscript>2</Subscript>]Cl(ReO<Subscript>4</Subscript>)<Subscript>2</Subscript> and [Au(en)<Subscript>2</Subscript>](ReO<Subscript>4</Subscript>)<Subscript>3</Subscript> complexes

Novel complex salts [Au(en)₂]Cl(ReO₄)₂ (I) and [Au(en)₂](ReO₄)₃ (II), en = ethylenediamine, are obtained. Their crystal structures are determined by single crystal X-ray diffraction. Complex I crystallizes in the triclinic crystal system: a = 6.2172(7) Å, b = 7.1644(8) Å, c = 8.8829(8) Å, α = 96.605(4)°, β = 110.000(4)°, γ = 97.802(4)°, P-1 space group, Z = 1, d _x = 3.905 g/cm³; complex II crystallizes in the monoclinic crystal system: a = 15.244(2) Å, b = 7.6809(8) Å, c = 9.3476(12) Å, β = 127.004(3)°, C2 space group, Z = 4, d _x = 4.057 g/cm³.     

Study of variation in thermophysical properties of RE<Subscript>6</Subscript>UO<Subscript>12</Subscript>(s) along the lanthanide series

The novel ligand N,N,N′′′′,N′′′′-tetrabutyl-N′′′,N′′′-(N″,N″-diethyl)-ethidene bisdiglycolamide (TBEE-BisDGA) and other eight analogous extractants have been synthesized and characterized by NMR and HRMS. The solvent extraction of Th⁴⁺, UO₂ ²⁺ and Eu³⁺ from nitric acid solution using the above BisDGA extractants was investigated in 1-dodecanol at 30 ± 1 °C. The extractants exhibited higher affinity toward Th⁴⁺ than UO₂ ²⁺ and Eu³⁺ in the present system. The maximum value of separation factor SF _Th(IV)/U(VI) and SF _{Th(IV)/Eu(III)} is 78.5 and 53.3 respectively for TBEE-BisDGA, 88.1 and 69.5 respectively in the case of TB ^i-PE-BisDGA at 3 M HNO₃ solution.     

High-temperature heat capacity and thermodynamic properties of pyrovanadate Pb<Subscript>2</Subscript>V<Subscript>2</Subscript>O<Subscript>7</Subscript> and orthovanadate Pb<Subscript>3</Subscript>(VO<Subscript>4</Subscript>)<Subscript>2</Subscript>

The heat capacities of Pb₂V₂O₇ and Pb₃(VO₄)₂ as a function of temperature in the range 350–965 K have been studied by the differential scanning calorimetry method. The C_P = f(T) curve for Pb₂V₂O₇ is described by the equation C_p = (230.76 ± 0.51) + (73.60 ± 0.50)×10^-3T ? (18.38 ± 0.54)×10⁵T^-2 in the entire temperature range. For Pb₃(VO₄)₂, there is a well-pronounced extreme point in the C_P = f(T) curve at T = 371.5 K, which is caused by the existence of a structural phase transition. The thermodynamic properties of the oxide compounds have been calculated.     

Phase formation in the Ag<Subscript>2</Subscript>MoO<Subscript>4</Subscript>-MgMoO<Subscript>4</Subscript>-Al<Subscript>2</Subscript>(MoO<Subscript>4</Subscript>)<Subscript>3</Subscript> system

The subsolidus region of the Ag₂MoO₄-MgMoO₄-Al₂(MoO₄)₃ ternary salt system has been studied by X-ray phase analysis. The formation of new compounds Ag_{1 ? x} Mg_{1 ? x} Al_{1 + x} (MoO₄)₃ (0 ≤ x ≤ 0.4) and AgMg₃Al(MoO₄)₅ has been determined. The Ag_{1 ? x} Mg_{1 ? x} Al_{1 + x} (MoO₄)₃ variable-composition phase is related to the NASICON type structure (space group R \(\bar 3\) c). AgMg₃Al(MoO₄)₅ is isostructural to sodium magnesium indium molybdate of the same formula unit and crystallizes in triclinic system (space group P \(\bar 1\), Z = 2) with the following unit cell parameters: a = 9.295(7) Å, b = 17.619(2) Å, c = 6.8570(7) Å, α = 87.420(9)°, β = 101.109(9)°, γ = 91.847(9)°. The compounds Ag_{1 ? x} Mg_{1 ? x} Al_{1 + x} (MoO₄)₃ and AgMg₃Al(MoO₄)₅ are thermally stable up to 790 and 820°C, respectively.     

Synthesis and X-ray investigation of Rb<Subscript>2</Subscript>[Pd(NO<Subscript>3</Subscript>)<Subscript>4</Subscript>] and Cs<Subscript>2</Subscript>[Pd(NO<Subscript>3</Subscript>)<Subscript>4</Subscript>]

Powder and single crystal X-ray diffraction studies have been performed for anhydrous nitrate complexes Rb₂[Pd(NO₃)₄] (I) and Cs₂[Pd(NO₃)₄] (II). Crystal data for I: a = 7.843(1) Å, b = 7.970(1) Å, c = 9.725(1) Å; β = 100.39(1)°, V = 597.9(1) Å ³, space group P2₁/c, Z = 2, d _calc = 2.918 g/cm³; for II: a = 10.309(2) Å, b = 10.426(2) Å, c = 11.839(2) Å; β = 108.17(3)°, V = 1209.0(4) ų, space group P2₁/c, Z = 4, d ^calc = 3.408 g/cm³. The structures are formed by isolated [Pd(NO₃)₄]^2? complex anions and alkali metal cations. The plane-square environment of the Pd atom is formed from the oxygen atoms of the monodentate nitrate groups. The geometrical characteristics of the complex anions are analyzed. Compound II has a short contact Pd...Cs 3.252 Å.     

Synthesis,structure, and physicochemical properties of the Cr(<Emphasis Type="Italic">iso</Emphasis>-Bu<Subscript>2</Subscript>PS<Subscript>2</Subscript>)<Subscript>3</Subscript> chelate compound

A paramagnetic (μ_ef = 3.86 BM) complex Cr(i-Bu₂PS₂)₃ (I) has been synthesized. Single crystals I were grown, and the crystal structure of the compound was determined from X-ray diffraction data (X8 APEX diffractometer, MoK _α radiation, 4516 F _hkl , R = 0.0604). Monoclinic crystals, space group P2₁/n, unit cell parameters a = 14.2665(5) Å, b = 11.4400(4) Å, c = 23.1299(8) Å, β = 90.245(1)°, V = 3775.0(2) ų, Z = 4, d _calc = 1.196 g/cm³. The structure is based on discrete mononuclear molecules. The coordination polyhedron of the Cr atom is a distorted S₆ octahedron formed from the S atoms of three cyclic bidentate ligands — i-Bu₂PS ₂ ⁻ ions. Electron spectroscopy data correspond to the octahedral structure of the CrS₆ chromophore. Original Russian Text Copyright ? 2007 by E. A. Sankova, L. A. Glinskaya, T. E. Kokina, R. F. Klevstova, and S. V. Larionov __________ Translated from Zhurnal Strukturnoi Khimii, Vol. 48, No. 2, pp. 374–378, March–April, 2007.     

Crystal structure of bis(semicarbazido)copper(II) nitrate [Cu(NH<Subscript>2</Subscript>NHC(O)NH<Subscript>2</Subscript>)<Subscript>2</Subscript>](NO<Subscript>3</Subscript>)<Subscript>2</Subscript>

The crystal structure of bis(semicarbazido)copper(II) nitrate [Cu(NH₂NHC(O)NH₂)₂](NO₃)₂ has been studied by X-ray diffraction. Monoclinic crystals, a = 6.835(2) Å, b = 7.733(2) Å, c = 10.320(3) Å, β = 105.701(3)°, V = 525.1(2) ų, space group P2₁/c, Z = 2, d _msd = 2.136 g/cm³, μ(MoK _α) = 2.143 mm⁻¹. The structure was solved with the program for automatic analysis of Patterson’s function and refined by full-matrix least squares in an anisotropic approximation for all non-hydrogen atoms using 753 independent reflections; R ₁ = 0.0203. The square environment of the Cu atom is formed from the amino nitrogen atoms of the hydrazine fragments and the C=O oxygen atoms of the two semicarbazide bidentate molecules (Cu-N 1.928 Å, Cu-O 1.999 Å). The axial positions are occupied by the O atoms of the NO ₃ ⁻ outer-spheric anions (Cu-O 2.505 Å). In the structure, the complex cations and the NO ₃ ⁻ anions are linked into a framework by N-H...O type hydrogen bonds. Original Russian Text Copyright ? 2007 by G. V. Romanenko, Z. A. Savelieva, and S. V. Larionov __________ Translated from Zhurnal Strukturnoi Khimii, Vol. 48, No. 2, pp. 370–373, March–April, 2007.     

Palladium clusters Pd<Subscript>4</Subscript>(SR)<Subscript>4</Subscript>(OAc)<Subscript>4</Subscript> and Pd<Subscript>6</Subscript>(SR)<Subscript>12</Subscript> (R = Bu,Ph): Structure and properties

The structures of the Pd₄(SBu)₄(OAc)₄ (I) and Pd₆ (SBu)₁₂ (II) palladium clusters are determined by the X-ray diffraction method. For cluster I: a = 8.650(2), b = 12.314(2), c = 17.659(4) Å, α = 78.03(3)°, β = 86.71(2)°, γ = 78.13(3)°, V = 1800.8(7) ų, ρcalcd = 1.878 g/cm³, space group P \(\bar 1\), Z = 4, N = 3403, R = 0.0468; for structure II: a = 10.748(2), b = 12.840(3), c = 15.233(3) Å, α = 65.31(3)°, β = 70.10(3)°, γ = 72.91(3)°, V = 1767.4(6) ų, ρ calcd = 1.605 g/cm³, space group P \(\bar 1\), Z = 1, N = 3498, R = 0.0729. In cluster I, four Pd atoms form a planar cycle. The neighboring Pd atoms are bound by two acetate or two mercaptide bridges (Pd…Pd 2.95–3.23 Å, Pd…Pd angles 87.15°–92.85°). In cluster II, the Pd atoms form a planar six-membered cycle with Pd···Pd distances of 3.09–3.14 Å, the PdPdPd angles being 118.95°–120.80°. The Pd atoms are linked in pairs by two mercaptide bridges. The formation of clusters I and II in solution is proved by IR spectroscopy and calorimetry. Analogous clusters are formed in solution upon the reaction of palladium(II) diacetate with thiophenol.