Star-shaped polymers with the fullerene C60 branching center

The anionic methods for the synthesis of homo- and heteroarm (hybrid) star-shaped polymers using fullerene C₆₀ aPre considered. The possibilities of fullerene C₆₀ as an agent of combination of living polymer chains and the procedures of transformation of polymer derivatives of C₆₀ (hexaadducts) into polyfunctional macroinitiators of anionic polymerization of vinyl monomers are shown. The methods for functionalization of polymer fullerene derivatives and their combinations into structures of complex controlled architecture are presented. The structural features and initiating properties of the living polymer fullerene derivatives and their role in the formation of heteroarm star-shaped macromolecules with the controlled number of branches and predetermined molecular weight characteristics of the arms are discussed. The hydrodynamic properties of the star-shaped fullerene-containing polymers are considered. The data on the small-angle neutron scattering study of self-organization of the stars in solutions are presented.     

Photodynamic Activity of Fullerene Derivatives Solubilized in Water by Natural-Product-Based Solubilizing Agents

Water-soluble fullerenes prepared by using solubilizing agents based on natural products are promising photosensitizers for photodynamic therapy. Cyclodextrin, β-1,3-glucan, lysozyme, and liposomes can stably solubilize not only C₆₀ and C₇₀, but also some C₆₀ derivatives in water. To improve the solubilities of fullerenes, specific methods have been developed for each solubilizing agent. Water-soluble C₆₀ and C₇₀ exhibit photoinduced cytotoxicity under near-ultraviolet irradiation, but not at wavelengths over 600 nm, which are the appropriate wavelengths for photodynamic therapy. However, dyad complexes of solubilized C₆₀ derivatives combined with light-harvesting antenna molecules improve the photoinduced cytotoxicities at wavelengths over 600 nm. Furthermore, controlling the fullerene and antenna molecule positions within the solubilizing agents affects the performance of the photosensitizer.     

Synthesis and properties of star polymers with a C5‐symmetric bowl‐shaped aromatic core

We report the synthesis and properties of star polymers with a C₅‐symmetric aromatic core. For this, corannulene‐based penta‐substituted polymerization initiators were synthesized. These initiators were then used to polymerize cyclic ester and styrenic monomers via ring opening polymerization and free radical polymerization methods, respectively. Preliminary results suggest that these novel polymers can interact with fullerene, C₆₀, and the degree of interaction can be tuned by the chemical nature of the solvent. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Star-shaped polymers with a doubled fullerene (C60) branching center

Star-shaped regular homopolystyrenes with 22 arms and heteroarm polymers with 12 PS arms and 10 poly(2-vinypyridine) arms have been synthesized by consecutive coupling-functionalization-coupling reactions. The synthesis includes the following stages: the exhaustive grafting of fullerene C₆₀ by polystyryllithium chains (living hexaadducts); the coupling of hexaadducts with the use of dimethyldichlorosilane or 1,4-dibromobutane into twelve-arm macromolecules, where the branching center is composed of two covalently bonded fullerene C₆₀ molecules; functionalization of twelve-arm double-core PS stars during the action of excess dihalides (the replacement of lithium atoms with groups containing chlorine or bromine atoms); and the coupling of living chains of PS or poly(2-vinylpyridine) via reactions with halogen-containing groups at the branching center of double-core PS stars. Linear living polymers used as arms have been prepared by anionic polymerization. Exclusion chromatography has been used to control the individual stages of synthesis. The molecular characteristics of the PS precursor and of star-shaped polymers have been studied in terms of hydrodynamics and light scattering.     

Regioselective synthesis of tetra(aryl)-mono(silylmethyl)[60]fullerenes and derivatization to methanofullerene compound

A method for the facile synthesis of tetraaryl-trimethylsilylmethyl-hydro[60]fullerenes, C₆₀Ar₄(CH₂SiMeR)H, has been developed in which readily prepared anionic mono(silylmethyl) fullerene is subjected to reaction conditions for organocopper-mediated multiple addition. Penta(organo)fullerene derivatives bearing different substituents and diverse functionality were synthesized in moderate to good yield under simple and mild reaction conditions. Further organic and organometallic transformations of these fullerenes allowed us to synthesize transition-metal complexes and a new methanofullerene derivative, 1,9-methano-6,12,15,18-tetraphenyl[60]fullerene, C₆₀Ph₄(CH₂).     

Synthesis and stability of linear and star polymers containing [C60] fullerene

Linear and symmetric star block copolymers of styrene and isoprene containing [C₆₀] fullerene were synthesized by anionic polymerization and appropriate linking postpolymerization chemistry. In all block copolymers, the C₆₀ was connected to the terminal polyisoprene (PI) block. The composition of the copolymers was kept constant (～30% wt PI), whereas the molecular weight of the diblock chains was varied. The polymers were characterized with a number of techniques, including size exclusion chromatography, membrane osmometry, and ¹H NMR spectroscopy. The combined characterization results showed that the synthetic procedures followed led to well‐defined materials. However, degradation of the fractionated star‐shaped copolymers was observed after storage for 2 months at 4 °C, whereas the nonfractionated material was stable. To further elucidate the reasons for this degradation, we prepared and studied a four‐arm star copolymer with the polystyrene part connected to C₆₀ and a six‐arm star homopolymer of styrene. These polymers as well as linear copolymers end‐capped, through ? N<, with C₆₀ were stable. Possible reasons are discussed. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2494–2507, 2001     

Comparison of electrochemical properties of two-component C60-Pd polymers formed under electrochemical conditions and by chemical synthesis

The electrochemical behavior of C₆₀-Pd polymer formed under electrochemical conditions and by the chemical synthesis was examined. In these polymers, fullerene moieties are covalently bonded to palladium atoms to form a polymeric network. Both materials deposited at the electrode surface show electrochemical activity at negative potentials due to the reduction of fullerene cage. Electrochemically formed thin polymeric films exhibit much more reversible voltammetric response in comparison to chemically synthesized polymers. The morphology and electrochemical behavior of chemically synthesized C₆₀-Pd polymer depend on the composition of grown solution. Chemical polymerization results in formation of large, ca. 50 μm, crystallic superficial structures that are composed of regular spherical particles with a diameter of 150 nm. The capacitance properties of C₆₀-Pd films were investigated by cyclic voltammetry and faradaic impedance spectroscopy. Specific capacitance of chemically formed films depends on the conditions of film formation. The best capacitance properties was obtained for films containing 1:3 fullerene to Pd molar ratio. For these films, specific capacitance of 35 Fg^?1 was obtained in acetonitrile containing (n-C₄H₉)₄NClO₄. This value is much lower in comparison to the specific capacitance of electrochemically formed C₆₀-Pd film.     

Anionic copolymerization of [60]fullerene with styrene initiated by sodium naphthalene

The novel C₆₀–styrene copolymers with different C₆₀ contents were prepared in sodium naphthalene-initiated anionic polymerization reactions. Like the pure polystyrene, these copolymers exhibited the high solvency in many common organic solvents, even for the copolymer with high C₆₀ content. In the polymerization process of C₆₀ with styrene an important side reaction, i.e., reaction of C₆₀ with sodium naphthalene, would occur simultaneously, whereas crosslinking reaction may be negligible. ¹³C-NMR results provided an evidence that C₆₀ was incorporated covalently into the polystyrene backbone. In contrast to pure polystyrene, the TGA spectrum of copolymer containing ∼ 13% of C₆₀ shows two plateaus. The polystyrene chain segment in copolymer decomposed first at 300–400°C. Then the fullerene units reptured from the corresponding polystyrene fragments attached directly to the C₆₀ cores at 500–638°C. XRD evidence indicates that the degree of order of polymers increases with the fullerene content increased in terms of crystallography. Incorporation of C₆₀ into polystyrene results in the formation of new crystal gratings or crystallization phases. In addition, it was also found that [60]fullerene and its polyanion salts [C₆₀ⁿ⁻(M⁺)_n, M = Li, Na] cannot be used to initiate the anionic polymerization of some monomers such as acrylonitrile and styrene, etc.© 1998 John Wiley & Sons, Inc. J. Polym. Sci. B Polym. Phys. 36: 2653–2663, 1998     

Electrochemically formed fullerene-based polymeric films

The recent results of investigations involving the electrochemical formation of polymers containing fullerenes and studies of their properties and applications are critically reviewed. From a structural point of view, these polymers can be divided into four main categories including (1) polymers with fullerenes physically incorporated into the foreign polymeric network without forming covalent bonds, (2) fullerene homopolymers formed via [2+2] cycloaddition, (3) “pearl necklace” polymers with fullerenes mutually linked covalently to form polymer chains, and (4) “charm bracelet” polymers containing pendant fullerene substituents. The methods of electrochemical polymerization of these systems are described and assessed. The structural features and properties of the electrochemically prepared polymers and their chemically synthesized analogs are compared. Polymer films containing fullerenes are electroactive in the negative potential range due to electroreduction of the fullerene moieties. Related films made with fullerenes derivatized with electron-donating moieties as building blocks are electroactive in both the negative and positive potential range. These can be regarded as “double cables” as they exhibit both p- and n-doping properties. Fullerene-based polymers may find numerous applications. For instance, they can be used as charge-storage and energy-converting materials for batteries and photoactive units of photovoltaic cell devices, respectively. They can be also used as substrates for electrochemical sensors and biosensors. Films of the C₆₀/Pt and C₆₀/Pd polymers containing metallic nano-particles of platinum and palladium, respectively, effectively catalyze the hydrogenation of olefins and acetylenes. Laser ablation of electrochemically formed C₆₀/M and C₇₀/M polymer films (M=Pt or Ir) results in fragmentation of the fullerenes leading to the formation of hetero-fullerenes, such as [C₅₉M]⁺ and [C₆₉M]⁺.Dedicated to Professor Dr. Alan M. Bond on the occasion of his 60th birthday.     

Classical Valence Similarity in Fullerene Derivatives

Summary.  The generalized Pauling bond order was enumerated in the C₆₀ fullerene cage molecule (truncated icosahedral symmetry). This index measures chemical similarity in fullerene derivatives such as dihydrofullerene (C₆₀H₂), anionized monohydrofullerene (C₆₀H⁻), N-substituted monohydrofullerene (C₅₉NH), the fullerene dimer ((C₆₀)₂), and the dianionic fullerene dimer ((C₆₀)₂ ²⁻). It is also useful in judging the chemical stability of isomers. Received October 9, 2001. Accepted November 9, 2001     

Synthesis of [60]fullerene-glycopyranosylaminopyrimidin-4-one conjugates

The synthesis of several C₆₀ derivatives containing a 6-(β-d-glycopyranosylamino)pyrimidin-4-one unit and a C₆₀-uridine conjugate is described. The fullerene derivatives bearing a 4-(β-d-glycopyranosylamino)pyrimidin-4-one moiety were synthesised by 1,3-dipolar cycloaddition reactions of C₆₀ with azomethine ylides generated in situ from the corresponding 5-formylpyrimidin-4-one derivatives and N-methylglycine. The synthesis of the C₆₀-uridine conjugate involved the selective protection of the 2′- and 3′-hydroxyl groups of uridine, esterification, cyclopropanation of C₆₀ and, finally, the deprotection of the hydroxyl groups. One of the fullerene-glycopyranosylaminopyrimidin-4-one conjugates was characterised by single-crystal X-ray crystallography. Differentiation between pairs of diastereoisomers, for several fullerene derivatives, was achieved through the study of their gas-phase fragmentations.     

Metal complexes with polymeric ligands: Chelation and metalloinitiation approaches to metal tris(bipyridine)‐containing materials

Synthetic approaches to metal complexes with polymeric ligands are described. The development of efficient methods for preparing simple bipyridine (bpy) derivatives and their corresponding metal complexes has facilitated their use as initiators and coupling agents in polymer syntheses. Ligand reagents were utilized as initiators in controlled polymerization reactions to form poly(2‐R‐2‐oxazolines) (R = methyl, ethyl, phenyl, undecyl), polystyrenes, poly(methyl methacrylates) (PMMA)s, poly(ϵ‐caprolactone)s, and poly(lactic acid)s with bipyridine chelates at the end or centers of the chains. Poly(ethylene glycol) macroligands were formed by a chain‐coupling method. Detailed studies of reaction kinetics were performed to determine the scope and limitations of each reaction type with different catalysts and reaction conditions. These results are illustrated for bpyPMMA_n (n = 1 or 2), which was prepared by atom transfer radical polymerization with a CuBr/1,4,4,7,7,10‐hexamethyltriethylenetetraamine catalyst system. Results of the kinetics investigations performed with other ligands and metalloinitiators are summarized. Macroligands thus prepared were coordinated to a labile metal ion, Fe(II), with standard protocols. Ultraviolet–visible spectral data for selected Fe‐centered polymers are provided that confirm the production of the targeted polymeric iron complex products. An inert metal, Ru(II), was used as a template for generating architectural diversity; polymeric complexes with one to six chains emanating from the central core, as well as different heteroarm star products, were prepared. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4704–4716, 2000     

Synthesis and photophysical properties of heptamethine cyanine–fullerene C60 dyads with non-quenched fluorescence

Two new heptamethine cyanine dye–fullerene C₆₀ covalently- linked dyads, which absorb in far-red and NIR spectral regions, have been synthesized by esterification click reaction and characterized by physicochemical methods. No significant fluorescence quenching was found due to weak electronic coupling between heptamethine moiety and fullerene core, which was confirmed by photophysical and electrochemical methods. Such dyads can be useful for cell imaging and fluorescence diagnostics of various fullerene derivatives.     

Oligo‐ and poly(fullerene)s for photovoltaic applications: Modeled electronic behaviors and synthesis

The atom transfer radical addition polymerization (ATRAP) of fullerene to give poly(fullerene)s (PFs) for organic electronics is explored. Quantum chemistry maps the expected electronic behavior of PFs with respect to common electron acceptors, namely fullerene, phenyl‐C₆₁‐butyric acid methyl ester and its bis‐adduct, and mono‐ and bis‐indine‐fullerene derivatives. Surprisingly, it is found that PFs should demonstrate electron affinities and LUMO energy levels closer to the bis‐derivatives than the mono‐adducts, even though only one C₆₀ double‐bond is used in PF chain formation. A self‐consistent library of PFs is synthesized and a correlation between structural characteristics and molecular weights is found. While comonomers with –OC₁₆H₃₃ linear side‐chains lead to the highest known ATRAP molecular weights of 21000 g mol ^{? 1}, like‐for‐like, branched side‐chains permit syntheses of higher molecular weights and more soluble polymers. Of the series, however, PFs with ‐OC₁₂ side‐chains are expected to be of the greatest interest for opto‐electronic applications due to their ease of handling and highest regioregularity. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1345–1355     

Electrochemical formation and properties of two-component films of transition metal complexes and C60 or C70

The electrochemically active polymers have been formed during electro-reduction carried out in solution containing fullerenes, C₆₀ or C₇₀, and transition metal complexes of Pd(II), Pt(II), Rh(III), and Ir(I). In these films, fullerene moieties are covalently bounded to transition metal atoms (Pd and Pt) or their complexes (Rh and Ir) to form a polymeric network. All films exhibit electrochemical activity at negative potentials due to the fullerene cages reduction process. For all studied metal complexes, yields of formation of films containing C₇₀ are higher than yields of electrodeposition of their C₆₀ analogs. C₇₀ /M films also exhibit higher porosity in comparison to C₆₀/M layers. The differences in film morphology and efficiency of polymer formation are responsible for differences in electrochemical responses of these films in acetonitrile containing supporting electrolyte only. C₇₀/M films shows more reversible voltammeric behavior in negative potential range. They also show higher potential range of electrochemical stability. Processes of film formation and electrochemical properties of polymers depend on the transition metal ions or atoms bonding fullerene cages into polymeric network. The highest efficiency of polymerization was observed for fullerene/Pd and fullerene/Rh films. In the case of fullerene/Pd films, the charge transfer processes related to the fullerene moieties reduction in negative potential range exhibit the best reversibility among all of the studied systems. Capacitance performances of C₆₀/Pd and C₇₀/Pd films deposited on the porous Au/quartz electrode were also compared. Capacitance properties of both films are significantly affected by the conditions of electropolymerization. Only a fraction of the film having a direct contact with solution contributes to pseudocapacitance. Capacitance properties of these films also depend on the size of cations of supporting electrolyte. The C₇₀/Pd film exhibits much better capacitance performance comparison to C₆₀/Pd polymer.     

Unique Separation Behavior of a C60 Fullerene‐Bonded Silica Monolith Prepared by an Effective Thermal Coupling Agent

Herein, we report a newly developed C₆₀ fullerene‐bonded silica monolith in a capillary with unique retention behavior due to the structure of C₆₀ fullerene. N‐Hydroxysuccinimide (NHS)‐conjugated C₆₀ fullerene was successfully synthesized by a thermal coupling agent, perfluorophenyl azide (PFPA), and assigned by spectroscopic analyses. Then, NHS‐PFPA‐C₆₀ fullerene was attached onto the surface of a silica monolith in a capillary. The capillary provided specific separation ability for polycyclic aromatic hydrocarbons in liquid chromatography by an effective π–π interaction. Furthermore, corannulene, which has a hemispherical structure, was selectively retained in the capillary based on the specific structural recognition due to the spherical C₆₀ fullerene. This is the first report revealing the spherical recognition ability by C₆₀ fullerene in liquid chromatographic separation.     

Dilatometric Characteristics of Polyacrylonitrile in a Mixture with Fullerene C60

Thermal cyclization of polyacrylonitrile, synthesized by anionic and radical polymerization, in films containing 0.5 wt % fullerene C₆₀ and without it was studied dilatometrically in the range 20-400°C.     

Electrochemical polymerization of fullerene C60

Cyclic voltammetry data show that fullerene C₆₀ films on the Pt electrode surface in MeCN are electropolymerized to form polymeric C₆₀. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 863–865, April, 1997.     

Polymerization of [60]fullerene activated with butyllithium

Fullerene polymerization caused by addition of an alkylating agent was discovered. Alkylation of fullerene with primary or secondary butyllithium gave both mono- and polynuclear products (polyfullerenes). The polymerization rate of the intermediates Bu _n C₆₀Li _n (n < 6) is nearly the same as the rate of the addition of BuLi to fullerene. Molecules C₆₀ can polymerize as well; however, the rate of this reaction is much lower than the polymerization rate of the reactive intermediate species.     

Fullerene Sugar Balls: A New Class of Biologically Active Fullerene Derivatives

Among the large variety of bioactive C₆₀ derivatives, fullerene derivatives substituted with sugar residues, that is, glycofullerenes, are of particular interest. The sugar residues are not only solubilizing groups; their intrinsic biological properties also provide additional appealing features to the conjugates. The most recent advances in the synthesis and the biological applications of glycofullerenes are summarized in the present review article with special emphasis on globular glycofullerenes, that is, fullerene sugar balls, constructed on a hexa‐substituted fullerene scaffold. The high local concentration of carbohydrates around the C₆₀ core in fullerene sugar balls is perfectly suited to the binding of lectins through the “glycoside cluster effect”, and these compounds are potential anti‐adhesive agents against bacterial infection. Moreover, mannosylated fullerene sugar balls have shown antiviral activity in an Ebola pseudotyped infection model. Finally, when substituted with peripheral iminosugars, dramatic multivalent effects have been observed for glycosidase inhibition. These unexpected observations have been rationalized by the interplay of interactions involving the catalytic site of the enzyme and non‐glycone binding sites with lectin‐like abilities.