Reactions of diazoalkanes with unsaturated compounds 16. Catalytic reactions of diazomethane with 2-alkenyl-1,3-oxazolidines and 2-alkenyl-1,3-oxathiolanes

The influence of 1,3-oxazolidine and 1,3-oxathiolane fragments in substituted alkenes on the direction of their catalytic reaction with diazomethane has been investigated. The olefins bearing an oxazolidine substituent in the α- or γ-position and an oxathiolane substituent in the γ-position relative to the C=C bond react with diazomethane in the presence of Pd(acac)₂ selectively resulting in cyclopropanation products. The use of Cu(OTf)₂ does not result in cyclopropanation; however Cu(OTf)₂ catalyzes the reaction of diazomethane with 2-(alk-1-enyl)-1,3-oxathiolanes yielding 2,3,5,6-tetrahydro-1,4-oxathiocines formed through the [2,3]-sigmatropic rearrangement of the intermediate sulfonium ylides. For Part 15 see Ref. 1. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 604–608, March, 2008.     

Synthesis of positively charged lipids containing a 1,3-oxathiolane cycle

Positively charged lipids of the 1,3-oxathiolane series were synthesized by interaction of 2-pentadecyl-5-tosyloxymethyl- or -5-iodomethyl-1,3-oxathiolane with 2-(N,N-dimcthyl-amino)ethanol.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 2347–2349, September, 1996.     

Cationic polymerizations of substituted 2-methylene-1,3-dioxocyclic acetals, 2-methylene-1,3-dithiolane and copolymerization of 2-methylene-1,3-dithiolane with 4-(t-butyl)-2-methylene-1,3-dioxolane1

Carbon black-supported sulfuric acid or BF₃·Et₂O-initiated polymerizations of 2-methylene-4,4,5,5-tetramethyl-1,3-dioxolane (1), 2-methylene-4-phenyl-1,3-dioxolane (2), and 2-methylene-4-isopropyl-5,5-dimethyl-1,3-dioxane (3) were performed. 1,2-Vinyl addition homopolymers of 1–3 were produced using carbon black-supported H₂SO₄ initiation at temperatures from 0°C to 60°C whereas both ring-opened and 1,2-vinyl structural units were present in the polymers using BF₃·Et₂O as an initiator. Cationic polymerizations of 2-methylene-1,3-dithiolane (4) and copolymerization of 4 with 2-methylene-4-(t-butyl)-1,3-dioxolane (5) were initiated with either carbon black-sulfuric acid or BF₃·Et₂O. Insoluble 1,2-vinyl addition homopolymers of 4 were obtained upon initiation with the supported acid or BF₃·Et₂O. A soluble copolymer of 2-methylene-1,3-dithiolane (4) and 4-(t-butyl)-2-methylene-1,3-dioxolane (5) was obtained upon BF₃·Et₂O initiation. This copolymer is composed of three structural units: a ring-opened dithioester unit, a 1,2-vinyl-polymerized 1,3-dithiolane unit, and a 1,2-vinyl polymerized 4-(t-butyl)-1,3-dioxolane unit. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2823–2840, 1999     

Regioselectivity of the hydrolysis of 2-(1-alkoxyvinyl)-substituted imidazolidines, 1,3-thiazolidines,and 1,3-oxazolidines

2-(1-Alkoxyvinyl)-1,3-thiazolidines reacted with H₂O or D₂O in the presence of 105 mol % of p-toluenesulfonic acid or trifluoroacetic acid (20°C, 1 h) to give 2-acetyl-1,3-thiazolidine in quantitative yield. 2-(1-Alkoxyvinyl)-3,5-diphenylimidazolidines underwent hydrolysis in the presence of 20 mol % of an acid (20°C, 24 h) at the vinyloxy group with high regioselectivity yielding 2-acetylimidazolidines. Hydrolysis of 2-(1-alkoxyvinyl)-3-phenyl-1,3-oxazolidines in the presence of 10 mol % of p-toluenesulfonic acid (20°C, 5 days) takes two pathways, one of which involves the endocyclic C-O bond with ring opening and the other involves the vinyloxy group to produce 2-acetyl-3-phenyl-1,3-oxazolidine. Unlike phenyl-substituted 1,3-thiazolidines and imidazolidines, hydrolysis of their 3-methyl- and 3,5-dimethyl-substituted analogs in acid medium occurs mainly via ring opening. The observed hydrolysis pathways were interpreted in terms of B3PW91/6-311G(d,p) quantum-chemical calculations.     

Synthesis and structures of ethoxymethylene derivatives of 1,3-diethoxycyclohexenylium perchlorate

1,3-Diethoxy-4,6-di(ethoxymethylene)-5,5-dimethylcyclohexenylium perchlorate (6a) was synthesized from 1,3-diethoxy-5,5-dimethylcyclohexenylium perchlorate by successive introduction of ethoxymethylene groups. Perchlorate6a was also obtained from dimedone in one preparative step. Compound6a was studied by X-ray diffraction analysis. The bond lengths in the fragment containing the C(1)–C(4) and C(6) atoms of the six-membered ring of the cation are substantially equalized and close to the C_arom-C_arom bond length. Apparently, this fact indicates that the positive charge is primarily delocalized over the aromatic system. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2300–2304, November, 1998.     

1,3-Dipolare Cycloadditionen eines Carbonyl-ylids mit 1,3-Thiazol-5(4H)-thionen und Thioketonen

1,3-Dipolar Cycloadditions of a Carhonyl-ylide with 1,3-Thiazole-5(4H)-thiones and Thioketones Inp-xylene at 150°, 3-phenyloxirane-2,2-dicarbonitrile ( 4b ) and 2-phenyl-3-thia-1-azaspiro[4.4]non-1-ene-4-thione ( 1a ) gave the three 1:1 adduets trans- 3a , cis- 3a , and 13a in 61, 21, and 3% yield, respectively (Scheme 3). The stereoisomers trans- 3a and cis- 3a are the products of a regioselective 1,3-dipolar cycloaddition of carbonylylide 2b , generated thermally by an electrocyclic ring opening of 4b (Scheme 6), and the C?S group of 1a . Surprisingly, 13a proved not to be a regioisomeric cycloadduct of 1a and 2b , but an isomer formed via cleavage of the O? C(3) bond of the oxirane 4b . A reaction mechanism rationalizing the formation of 13a is proposed in Scheme 6. Analogous results were obtained from the reaction of 4b and 4,4-dimethyl-2-phenyl-1,3-thiazole-5 (4H)-thione ( 1b , Scheme 3). The thermolysis of 4b in p-xylene at 130° in the presence of adamantine–thione ( 10 ) led to two isomeric 1:1 adducts 15 and 16 in a ratio of ca. 2:1, however, in low yield (Scheme 4). Most likely the products are again formed viathe two competing reaction mechanisms depicted in Scheme 6. The analogous reactions of 4b with 2,2,4,4-tetramethylcyclobutane-1,3-thione ( 11 ) and 9H-xanthene-9-thione ( 12 ) yielded a single 1:1 adduct in each case (Schemes). In the former case, spirocyclic 1,3-oxathiolane 17 , the product of the 1,3-dipolar cycloaddition with 2a corresponding to 3a , was isolated in only 11 % yield. It is remarkable that no 2:1 adduct was formed even in the presence of an excess of 4b. In contrast, 4b and 12 reacted smoothly to give 18 in 81 % yield; no cycloadduct of the carbonylylide 2a could be detected. The structures of cis- 3a , 13a , 15 , and 18 , as well as the structure of 14 , which is a derivative of trans- 3a , have been established by X-ray crystallography (Figs. 1–3, Table).     

Water mediated synthesis of various [1,3]oxazine compounds using alum as a catalyst

Abstract

A simple, efficient, and practical procedure for the synthesis of various substituted 2,3-dihydro-2-phenyl-1H-naphtho[1,2-e][1,3]oxazines and 3,4-dihydro-3-phenyl-2H-naphtho[2,1-e][1,3]oxazines using KAl(SO₄)₂ 12H₂O (alum) as a non-toxic, reusable, inexpensive, and easily available catalyst is described using water as a solvent. These improved reaction conditions allow the preparation of a wide variety of substituted [1,3]oxazines in high yields and purity under mild reaction conditions.     

Rh2(OAc)4-catalyzed reaction of 1,3-dioxanes with methyl diazoacetate

The reactions of methyl diazoacetate with 1,3-dioxanes in the presence of Rh₂(OAc)₄ afford 1,4-dioxepanes in up to 46% yields. The insertion of methoxycarbonylcarbene into the C—O bond occurs only in the case of 2-phenyl-1,3-dioxanes.     

Electron ionization and methane chemical ionization mass spectrometry study of some 2,2-disubstituted 1,3-dioxolanes, 1,3-dithiolanes, 1,3-oxathiolanes and 1,3-dioxanes. Gas-phase lactone and thiolactone formation

The electron ionization and methane chemical ionization mass spectra of some 2,2-disubstituted 1,3-dioxolanes, 1,3-dithiolanes and 1,3-oxathiolanes were studied. Especially, the effect of the length of the side chain in ring position 2 of these compounds and the ease of formation of possible lactone/thiolactone ion as a fragmentation product were examined. In addition, two 2,2-disubstituted 1,3-dioxanes were studied to see the effect of the bigger ring size. The formation of lactone ions was more favorable under methane chemical ionization than under electron ionization conditions. The structures of fragment ions and the ions generated from model compounds were carefully studied using both high- and low-energy collision-induced dissociation. Also ab initio molecular orbital calculations up to the HF/6–31G** level of theory for protonated 2-methyl-2-propanoic acid ethyl ester of 1,3-dioxolane, 1,3-oxathiolane and 1,3-dithiolane and for two isomeric bicyclic ions were carried out. The theoretical results obtained favor the formation of the lactone ion. Copyright © 2005 John Wiley & Sons, Ltd.     

Structures and thermal properties of strontium and barium 1,3-propanediaminetetraacetates

In neutral and acidic solution, homonuclear s-block metal complexes [Sr₂(1,3-pdta)(H₂O)_3.5] _n (1), {[Ba₂(1,3-pdta)(H₂O)₆]·H₂O} _n (2), {[Sr(1,3-H₂pdta)]·(H₂O)} _n (3), and [Ba(1,3-H₂pdta)(H₂O)₃] _n (4) {1,3-H₄pdta=1,3-propanediamine-N,N,N′,N′-tetraacetic acid, CH₂[CH₂N(CH₂CO₂H)₂]₂} were isolated. In 1 and 2, hexadentate 1,3-pdta joins two metal ions via the diamine chain. In 3 and 4, the nitrogens of 1,3-H₂pdta were protonated and show no coordination. There is no coordinated water in 3, unusual coordination for strontium. In 4, the coordination number is nine and there are three coordinated waters for each barium. One carboxy group of pdta is free without coordination. Thermal decomposition shows that temperatures of ligand elimination start at 408, 423, 298, and 250?°C for 1–4, respectively. Acidic condition is favorable for preparation of metal oxide at low temperature.     

1,3-Thiazepines. 5. Study of 2-Phenyl(benzyl)iminohexahydro-1,3-thiazepines and Their Derivatives by 13C Spectroscopy

We have studied the ¹³C NMR spectra of 2-phenyl- and 2-benzyliminohexahydro-1,3-thiazepines, and also their alkyl, acyl, carbamoyl, and thiocarbamoyl derivatives. We have shown that introducing substiuents both into the 2 position and into the 3 position of the thiazepine ring mainly affects the chemical shifts for the C(4) of the heterocycle.     

Synthesis of 3-thienyl substituted 2-pyrazolines by 1,3-dipolar cycloaddition

1,3,5-Trisubstituted 3-thienylpyrazolines have been prepared in high yields by the reaction of substituted,N-(P;-nitrophenyl)-3-thiophenecarbohydrazonoyl chlorides with Et₃N in CH₂Cl₂ in the presence of an excess of a monosubstituted olefin. The reaction probably occurs as 1,3-dipolar cycloaddition of the corresponding 3-thiophenecarbonitrile imines formedin situ at the double bond of the olefin.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 114–117, January, 1994.     

Zum Mechanismus der Reduktion von 1,3-Benzodithiol-2-thionen

Carbophilic reaction of 1,3-benzodithiole-2-thione (1) with trideuteroborane · dimethylsulfide, synthesized from NaBD₄ and BF₃ ·Me ₂S inTHF, gave 2,2-dideutero-1,3-benzodithiole (5 b) as well as the minor side-products7 b,8 and9 b.

     

A four-step tandem synthesis of 3,5-diaroyl-4-arylpyrazoles from 1,3-diaryl-propane-1,3-diketones

A novel four-step tandem procedure was developed for efficient synthesis of 3,5-diaroyl-4-arylpyrazoles by simply stirring the mixture of 1,3-diarylpropane-1,3-diketones, TsN₃, aqueous MeNH₂ and Na₂CO₃ in DMF at 85 °C for 3 h.     

The methoxycarbonylcarbene insertion into 1,3-dithiolane and 1,3-oxathiolane rings

Treatment of substituted 1,3-dithiolanes and 1,3-oxathiolanes with methyl diazoacetate in the presence of Rh₂(OAc)₄ effects ring expansion to the corresponding substituted 1,4-dithiane-2-carboxylates and 1,4-oxathiane-3-carboxylates. The sulfur ylides initially generated in these reactions undergo Stevens rearrangement in competition with both [2,3]-C-C-sigmatropic rearrangement and intramolecular fragmentation. In the case of 2-styryl-substituted 1,3-oxathiolane and 1,3-dithiolane, ring expansion on one-, three- and four-carbons subsequently takes place.     

Synthesis of 2-substituted benzo-1,3-ditelluroles

A method for the synthesis of 2-phenylbenzo-1,3-ditellurole by the reaction of disodiumo-benzeneditellurolate with benzylidene chloride was proposed. 2-Methylbenzo-1,3-ditellurole and benzo-1,3-ditellurole-2-carboxylic acid were prepared by the reaction of 2-lithiobenzo-1,3-ditellurole with MeI and CO₂, respectively. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1132–1134, June, 2000.     

Synthesis of Substituted 2‐Amino‐1,3‐oxazoles via Copper‐Catalyzed Oxidative Cyclization of Enamines and N,N‐Dialkyl Formamides

A facile synthesis of 2‐amino‐1,3‐oxazoles via Cu^I‐catalyzed oxidative cyclization of enamines and N ,N ‐dialkyl formamides has been developed. The reaction proceeds through an oxidative C−N bond formation, followed by an intramolecular C(sp²)−H bond functionalization/C−O cyclization in one pot. This protocol provides direct access to useful 2‐amino‐1,3‐oxazoles and features protecting‐group‐free nitrogen sources, readily available starting materials, a broad substrate scope and mild reaction conditions.     

N-(1,3-Thiazol-5(4H)-yliden)amine aus 1,3-dipolaren Cycloadditionen von Aziden mit 1,3-Thiazol-5(4H)-thionen

N-(1,3-Thiazol-5(4H)-ylidene)amines via 1,3-Dipolar Cycloaddition of Azides and 1,3-Thiazol-5(4H)-thiones Organic azides 5 and 4,4-dimethyl-2-phenyl-1,3-thiazol-5(4H)-thione ( 2 ) in toluene at 90° react to give the corresponding N-(1,3-thiazol-5(4H)-ylidene)amines (= 1,3-thiazol-5(4H)-imines) 6 in good yield (Table). A reaction mechanism for the formation of these scarcely investigated thiazole derivatives is formulated in Scheme 3: 1,3-Dipolar azide cycloaddition onto the C?S group of 2 leads to the 1:1 adduct C . Successive elimination of N₂ and S yields 6 , probably via an intermediate thiaziridine E .     

Interaction of fluorine-containing 1,3-dicarbonyl compounds with polyamines

In the reaction of fluorinated copper(II) 1,3-diketonates with diethylenetriamine (or triethylenetetramine) in CHCl₃, N,N-bis(1,3-aminovinylketones) are formed in 21–35% yields. Fluorine-containing 1,3-diketones and 1,3-ketoesters, upon interaction with polyamines without solvent, undergo acid cleavage, forming the corresponding amides. The copper(II) 1,3-ketoesterates are readily cleaved in CHCl₃ at 25°C in excess triethylenetetramine or ethylenediamine.Department of Fine Organic Synthesis, Institute of Organic Chemistry, Ural Branch, Russian Academy of Sciences, 620219 Ekaterinburg. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 11, pp. 2591–2596, November, 1992.     

Regio- and Stereoselective Formation of 1,3-Oxathiolanes by Reactions of Thiocarbonyl Compounds with Oxiranes

Abstract

Lewis acid-catalyzed reactions of oxiranes with a variety of C═S compounds yield 1,3-oxathiolanes. The ring enlargement of monosubstituted oxiranes occurs regioselectively via cleavage of the O,C(3) bond of alkyl substituted oxiranes and the O,C(2) bond of phenyl oxirane. Furthermore, the reaction proceeds with inversion of the configuration at the center of the nucleophilic attack by the S-atom. The formation of thiocarbonylium ions as intermediates is supported by Wagner–Meerwein-type rearrangements. Enolized thioketones react with oxiranes to give enesulfanyl alcohols, which undergo an acid-catalyzed cyclization to yield 1,3-oxathiolanes.