Application of silica-supported Fe–Cu nanoparticles in the selective hydrogenation of <Emphasis Type="Italic">p</Emphasis>-dinitrobenzene to <Emphasis Type="Italic">p</Emphasis>-phenylenediamine

Supported bimetallic Fe–Cu/SiO₂ materials are synthesized, and their catalytic activity in hydrogenation of dinitrobenzene to phenylenediamine at 145–180°С and 1.3 MPa hydrogen pressure is studied for the first time. The best results (89% selectivity toward _p-phenylenediamine at complete conversion of _p-dinitrobenzene) are obtained for the sample synthesized via co-deposition with subsequent calcination at 300°С. The sample contains 7% iron and 3% copper. The formation of separate phases of metal oxides (for the catalysts prepared by impregnation) and mixed bimetallic oxide phases (in case of co-deposition procedure) in calcined samples is revealed via thermoprogrammed reduction with hydrogen.     

Oxidation of reaction products of <Emphasis Type="Italic">p</Emphasis>-aryl-<Emphasis Type="Italic">С</Emphasis>,<Emphasis Type="Italic">С</Emphasis>-disubstituted nitrones and dimethyl 3-methylenecyclopropane-1,2-dicarboxylate

Oxidation with 2,3-dichloro-4,5-dicyanobenzoquinone of 2,4-dihydro-1Н-azeto[1,2-a]quinoline-3,4 -dicarboxylates obtained in the reaction of N-aryl-С,С-disubstituted nitrones with Feist’s acid ester resulted in the formation of 2-vinylquinoline-3,4-dicarboxylates in good yields.     

<Emphasis Type="Italic">N</Emphasis>′-tetrazolylmethoxyl derivatives of <Emphasis Type="Italic">N</Emphasis>-methyldiazene <Emphasis Type="Italic">N</Emphasis>-oxides

A preparation method was developed for previously unknown tetrazole derivatives containing in the 1, 2, and/or 5 positions of the tetrazole ring N-methyldiazene-N-oxide-N′-oxymethyl groups.     

Directed Aminomethylation of Pyrrole,Indole, and Carbazole with <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N′</Emphasis>,<Emphasis Type="Italic">N′</Emphasis>-Tetramethylmethanediamine

Catalytic aminomethylation of pyrrole and indole with N,N,N′,N′-tetramethylmethanediamine in the presence of 5 mol % of ZrOCl₂·8H₂O proceeds selectively at the positions 2, 5 of pyrrole and 1, 3 of indole. Carbazole under the same conditions affords 3-formyl-9-aminomethyl derivative. The reaction in the presence of 5 mol % of K₂CO₃ occurs as monoaminomethylation: for pyrrole at the position 2, for indole at the position 3, and for carbazole at the nitrogen atom of the substrate. Water-soluble 1,1′-(1H-pyrrole-2,5-diyl)bis(N,N-dimethylmethanamine) exhibits a fungistatic activity with respect to phytopathogenic fungi Rhizoctonia solani.     

10<Emphasis Type="Italic">α</Emphasis>-Hydroxy-<Emphasis Type="Italic">β</Emphasis>-isomorphine,a by-product of the synthesis of 10<Emphasis Type="Italic">α</Emphasis>-hydroxymorphine

Abstract  A new compound was isolated from the reaction mixture after O-demethylation of 6-O-acetyl-10α-acetoxycodeine with boron tribromide. The structure of this compound, 10α-hydroxy-β-isomorphine, was elucidated by spectral data, and its spatial arrangement was deduced from an NOE experiment. Capillary zone electrophoresis was used for separation of morphine and its 10-hydroxy analogues. Graphical abstract        

Study of<Emphasis Type="Italic"> β</Emphasis>–<Emphasis Type="Italic">α</Emphasis> recrystallization of the polypropylene

The crystalline modifications and of polypropylene (PP) were studied by using polarized light microscopy (PLM), wide-angle X-ray diffraction (WAXD), and differential scanning calorimetry (DSC). Typically crystals surrounded by spherulites were observed at low temperature. With increasing temperature the crystals melted and a new crystal appeared. More interestingly, the melting temperature of the new crystal was about 5 ° higher than that of spherulites originally present in the sample formed isothermally. It was assumed that this new crystal was the recrystalline crystal. This assumption was supported by the DSC results. Furthermore, the crystallization kinetics of the PP used was studied on the basis of the traditional Avrami analysis. As a result, the Avrami exponents of crystallization temperature from 120 to 130 °C ranged between 4.21 and 3.60, indicating that the crystallization mechanism of PP order melt was spherulitic growth and random nucleation.     

Theoretical and experimental NMR studies of the Swern oxidation of methyl 6<Emphasis Type="Italic">α</Emphasis>,7<Emphasis Type="Italic">β</Emphasis>-dihydroxyvouacapan-17<Emphasis Type="Italic">β</Emphasis>-oate

This work describes the synthesis of new derivatives of 6α,7β-dihydroxyvouacapan-17β-oic acid (1) employing the Swern method for the oxidation of C-6 and C-7 of methyl 6α,7β-di-hydroxyvouacapan-17β-oate (2) and the formation of methyl 6,7-dioxovouacapan-17β-oate (3). NMR structural studies associated with theoretical calculations of reaction intermediates and products are also reported. The mixture of methyl 7β-hydroxy-6-oxovouacapan-17β-oate (4; 21%) and methyl 6α-hydroxy-7-oxovouacapan-17β-oate (5; 79%) was the product from the first step of the oxidation of 2. The lower energy of 5, calculated by HF/6-31G* and DFT/BLYP/6-31G* methods, reinforces the thermodynamic control proposed for the reaction. After further Swern oxidation of the mixture of 4 and 5, the isomeric form methyl 6-hydroxy-7-oxovouacap-5-en-17β-oate (6) was obtained. Theoretical calculations indicate a lower energy for the mono-enol 6 than the 1,2-diketo 3 and the other mono-enol methyl 7-hydroxy-6-oxovouacap-7-en-17β-oate (7).     

Synthesis of 20<Emphasis Type="Italic">S</Emphasis>-protopanaxadiol <Emphasis Type="Italic">β</Emphasis>-D-galactopyranosides

20S-Protopanaxadiol (3β,12β,20S-trihydroxydammar-24-ene) 3-, 12-, and 20-O-β-D-galactopyranosides were synthesized for the first time. Condensation of 12β-acetoxy-3β,20S-dihydroxydammar-24-ene (1) and 2,3,4,6-tetra-O-acetyl-α-D-galactopyranosylbromide (α-acetobromogalactose) (2) under Koenigs–Knorr conditions with subsequent removal of the protecting groups resulted in regio- and stereoselective formation of 20S-protopanaxadiol 3-O-β-D-galactopyranoside, an analog of the natural ginsenoside Rh₂. Glycosylation of 12β,20S-dihydroxydammar-24-en-3-one (5) by 2 with subsequent treatment of the reaction products with NaBH₄ in isopropanol and deacetylation with NaOMe gave 20S-protopanaxadiol 12- and 20-O-β-Dgalactopyranosides.     

Controlled radical copolymerization of styrene and <Emphasis Type="Italic">tert</Emphasis>-butyl acrylate in the presence of tri-<Emphasis Type="Italic">n</Emphasis>-butylborane–<Emphasis Type="Italic">p</Emphasis>-quinone catalytic system

Radical copolymerization of styrene with tert-butyl acrylate is studied under different conditions. It is found that the addition of tri-n-butylborane or tri-n-butylborane along with p-quinones (2,3-dimethylbenzoquinone, 2,5-di-tert-butylbenzoquinone) results in changes in the relative activities of monomers. Copolymerization in the presence of tri-n-butylborane and p-quinones proceeds via the mechanism of reversible inhibition and is characterized by the linear increase in number-average molecular weight with conversion and by the capacity of copolymers of reinitiation. The hydrolyzed copolymer samples form more stable films compared to copolymers prepared via conventional radical copolymerization.     

Crystallization and Simulation Studies in <Emphasis Type="Italic">m</Emphasis>-Dinitrobenzene–<Emphasis Type="Italic">p</Emphasis>-Chloroaniline Eutectic System

Thaw-melt method showed that the phase diagram of m-dinitrobenzene (m-DNB)–p-chloroaniline (p-CA) system belongs to simple eutectic type. The kinetics of solidification followed Hillig and Turnbull’s equation. Excess thermodynamic functions and FT-IR spectral studies indicated some weak interaction between the component molecules in the eutectic. The mechanical strength of the eutectic was found to be higher than those of its components. Molecular stability was predicted on the basis of frontier molecular orbital analysis. The value was found to be 0.06073 a.u. for eutectic, indicating. the possibility of charge transfer interaction during the eutectic formation. Results showed that the eutectic is stabilized by hydrogen-bond formation. Calculated interaction energy of reactants and eutectic was found to be–17.4 kJ mol^–1.     

1,3-Diamino-2-Hydroxypropane-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>′,<Emphasis Type="Italic">N</Emphasis>′-Tetraacetic Acid: Crystal and Molecular Structures

The synthesis, IR spectroscopic study, and X-ray diffraction analysis (CIF file CCDC no. 1574078) are carried out for 1,3-diamino-2-hydroxypropane-N,N,N′,N′-tetraacetic acid (I). The structural units of a crystal of compound I are (H_4.5HPdta)^0.5– anions, (H_5.5HPdta)^0.5+ cations, and molecules of water of crystallization joined by a branched network of hydrogen bonds: strong intermolecular O–H…O and intramolecular N–H…O bonds.     

Phase Diagrams of the <Emphasis Type="Italic">n</Emphasis>-Decane–<Emphasis Type="Italic">n</Emphasis>-Hexadecane–Cyclododecane, <Emphasis Type="Italic">n</Emphasis>-Decane–Cyclododecane,and <Emphasis Type="Italic">n</Emphasis>-Hexadecane–Cyclododecane Systems

The n-decane–n-hexadecane–cyclododecane, n-decane–cyclododecane, and n-hexadecane–cyclododecane systems are studied by means of low-temperature differential thermal analysis using a differential scanning heat flow calorimeter. It is noted that all studied systems belong to the eutectic type. It is concluded that in the n-decane–n-hexadecane–cyclododecane system, the eutectic composition contains 85.0 wt % n-С₁₀Н₂₂, 4.0 wt % n-С₁₆Н₃₄, and 11.0 wt % С₁₂Н₂₄. It has a melting point of ?35.0°C.     

<Emphasis Type="Italic">β</Emphasis>-Chloro-<Emphasis Type="Italic">α</Emphasis>,<Emphasis Type="Italic">β</Emphasis>-unsaturated carbonyls as convenient precursors of highly substituted benzenes

The Diels–Alder reactions of three β-chloro-α,β-unsaturated carbonyl compounds 1–3 with different dienes were carried out to afford highly functionalized cyclohexenes 4–9, bearing quaternary centers, in good yields. These cycloadducts (CAs) undergo dehydrochlorination with subsequent aromatization in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene DBU to produce new substituted benzenes 11–14. Compound 10 is the product of lactonization and removal of an HCl molecule from compound 7. All products were characterized by NMR, IR, elementary analysis and some of them by MS. Structure assignments of isomers were carried out on the basis of NMR chemical shifts and coupling constants using 1D, 2D and heteronOe NMR techniques.     

Synthesis of <Emphasis Type="Italic">α</Emphasis>-chloropyridine derivatives of <Emphasis Type="Italic">γ</Emphasis>-aminobutyric acid

The sodium salt of N-(6-chloronicotinoyl)-γ-aminobutyric acid, a structural analog of the known nootropic and vasidilating drug picamilon, was synthesized via Schotten–Baumann acylation of γ-aminobutyric acid with 6-chloronicotinoyl chloride and subsequent neutralization of the N-(6-chloronicotinoyl)-γ-aminobutyric acid that was obtained in >60% yield.     

Spectroscopic and electrical characterization of <Emphasis Type="Italic">α</Emphasis>,<Emphasis Type="Italic">γ</Emphasis>-bisdiphenylene-<Emphasis Type="Italic">β</Emphasis>-phenylallyl radical as an organic semiconductor

The semiconductor properties of the earliest known stable radical, α,γ-bisdiphenylene-β-phenylallyl radical (Koelsch radical, 1^?) were assessed using spectroscopic and electrical techniques. This radical undergoes reversible redox processes, and it has low redox potentials. In addition, 1^? possesses long wavelength absorption bands, owing to the existence of a singly-occupied molecular orbital whose energy level lies between those of the HOMO and LUMO. A spin-coated thin-film of 1^? displays photocurrent and an electron mobility of 6.3 × 10^?7 cm² V^?1 s^?1 on a trially-fabricated organic field effect transistor.     

New “s<Emphasis Type="Italic">p</Emphasis><Superscript><Emphasis Type="Italic">2</Emphasis></Superscript>-bonded” carbanucleosides

By reaction of 2,3-dichloro-, 2,3,5-trichloro-, 2,5-dichloro-3-phenylsulfonyl-, 2-chloro-3-phenylsulfonyl-4,4-ethylenedioxycyclopent-2-en-1-ones with uracyl 3- and 2-uracyl derivatives were obtained of the corresponding chlorocyclopentenone.     

Cyclization of the substituted <Emphasis Type="Italic">N</Emphasis>-(<Emphasis Type="Italic">Ortho</Emphasis>-cyclopropylphenyl)-<Emphasis Type="Italic">N′</Emphasis>-aryl ureas and thioureas in the gas phase and solution

Electron ionization (EI), chemical ionization (CI), tandem mass spectrometry, high-resolution measurements, and labeling studies as well as quantum chemical calculations were used to understand the behavior of the molecular radical cations (EI) and protonated molecules (CI) of substituted N-(ortho-cyclopropylphenyl)-N'-aryl ureas and N-(ortho-cyclopropylphenyl)-N'-aryl thioureas in a mass spectrometer. Fragmentation schemes and possible mechanisms of primary isomerization were proposed. According to the fragmentation pattern, formation of the corresponding benzoxazines and benzothiazines was considered as the major process of isomerization of the original M(+.) and MH(+), although some portions of these ions definitely transformed into other structures. The treatment of N-(ortho-cyclopropylphenyl)-N'-phenyl urea and N-(ortho-cyclopropylphenyl)-N'-phenylthiourea in solution with strong acids formed predicted 4-ethyl-N-phenyl-4H-3,1-benzoxazin-2-amin and 4-ethyl-N-phenyl-4H-3,1-benzothiazin-2-amine as principal products.     

Complex formation of magnesium and calcium ions with trimethylenediamine-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>’,<Emphasis Type="Italic">N</Emphasis>’-tetraacetic acid

Stability constants and heat effects of the formation reactions of magnesium and calcium trimethylenediaminetetraacetates at 298.15 K and ionic strength of 0.1, 0.5, and 1.0 (mol/L KNO₃) have been determined by means of potentiometry and calorimetry. Standard thermodynamic parameters (log K⁰, Δ_rG⁰, Δ_rH⁰, and Δ_rS⁰) of the studied equilibriums have been determined.     

Computer models of eutectic-type <Emphasis Type="Italic">T</Emphasis>–<Emphasis Type="Italic">x</Emphasis>–<Emphasis Type="Italic">y</Emphasis> diagrams with allotropy

Using the eutectic-type T–x–y diagram as an example, it can be represented the analysis of its geometrical construction dependence on the temperature of a component two polymorphous modifications which participate in mono- and invariant metatectic and invariant eutectic (eutectoid) transformations above or below (and within) binary eutectics temperature intervals and below a ternary eutectic temperature. Computer models for considered phase diagrams have been designed. Such models help to solve applied tasks like visualization, isopleths and isothermal sections decoding, mass balances calculation and evaluation of phase and conglomerate concentration in microstructure.