Second law analysis of the flow of two immiscible micropolar fluids between two porous beds

This work investigates the effect of entropy generation rate within the flow of two immiscible micropolar fluids in a horizontal channel bounded by two porous beds at the bottom and top. The flow is considered in four zones. Zone IV contains the flow of viscous fluid in the large porous bed at the bottom, zone I and zone II contain the free flow of two immiscible micropolar fluids, and zone III contains the flow of viscous fluid in the thin porous bed at the top. The flow is assumed to be governed by Eringen’s micropolar fluid flow equations in the free channel. Darcy’s law and Brinkman’s model are used for flow in porous zones, namely, zone IV and zone III, respectively. The closed form expressions for entropy generation number and Bejan number are derived in dimensionless formby using the expressions of velocity, microrotation and temperature. The effect of physical parameters like a couple stress parameter and micropolarity parameter on velocity, microrotation, temperature, entropy generation number and Bejan number are investigated.     

Dual Solutions of MHD Boundary Layer Flow of a Micropolar Fluid with Weak Concentration over a Stretching/Shrinking Sheet

We investigate the dual solutions for the MHD flow of micropolar fluid over a stretching/shrinking sheet with heat transfer. Suitable relations transform the partial differential equations into the ordinary differential equations.Closed forms solutions are also obtained in terms of confluent hypergeometric function. This is the first attempt to determine the exact solutions for the non-linear equations of MHD micropolar fluid model. It is demonstrated that the microrotation parameter helps in increasing Nusselt number and the dual solutions exist for all fluid flow parameters under consideration. The dual behavior of dimensionless velocity, temperature, microrotation, skin-friction coefficient,local Nusselt number is displayed on graphs and examined.     

Heat transfer in MHD flow of dusty viscoelastic (Walters’ liquid model-B) stratified fluid in porous medium under variable viscosity

The paper investigates the effects of heat transfer in MHD flow of viscoelastic stratified fluid in porous medium on a parallel plate channel inclined at an angle θ. A laminar convection flow for incompressible conducting fluid is considered. It is assumed that the plates are kept at different temperatures which decay with time. The partial differential equations governing the flow are solved by perturbation technique. Expressions for the velocity of fluid and particle phases, temperature field, Nusselt number, skin friction and flow flux are obtained within the channel. The effects of various parameters like stratification factor, magnetic field parameter, Prandtl number on temperature field, heat transfer, skin friction, flow flux, velocity for both the fluid and particle phases are displayed through graphs and discussed numerically.     

Studying effect of MHD on thin films of a micropolar fluid

This paper deals with the study of the effect of MHD on thin films of a micropolar fluid. These thin films are considered for three different geometries, namely: (i) flow down an inclined plane, (ii) flow on a moving belt and (iii) flow down a vertical cylinder. The transformed boundary layer governing equations of a micropolar fluid and the resulting system of coupled non-linear ordinary differential equations are solved numerically by using shooting method. Numerical results were presented for velocity and micro-rotation profiles within the boundary layer for different parameters of the problem including micropolar fluid parameters, magnetic field parameter, etc., which are also discussed numerically and illustrated graphically.     

Perturbation technique for unsteady MHD mixed convection periodic flow, heat and mass transfer in micropolar fluid with chemical reaction in the presence of thermal radiation

An analytical study is presented for the problem of unsteady hydromagnetic heat and mass transfer for a micropolar fluid bounded by semi-infinite vertical permeable plate in the presence of first-order chemical reaction, thermal radiation and heat absorption. A uniform magnetic field acts perpendicularly to the porous surface which absorbs the micropolar fluid with a time-dependent suction velocity. The basic partial differential equations are reduced to a system of nonlinear ordinary differential equations which are solved analytically using perturbation technique. Numerical calculations for the analytical expressions are carried out and the results are shown graphically. The effects of the various dimensionless parameters related to the problem on the velocity, angular velocity, temperature and concentration fields are discussed in detail.     

Mixed Convection Heat and Mass Transfer in a Micropolar Fluid with Soret and Dufour Effects

A mathematical model for the steady, mixed convection heat and mass transfer along a semi-infinite vertical plate embedded in a micropolar fluid in the presence of Soret and Dufour effects is presented. The non-linear governing equations and their associated boundary conditions are initially cast into dimensionless forms using local similarity transformations. The resulting system of equations is then solved numerically using the Keller-box method. The numerical results are compared and found to be in good agreement with previously published results as special cases of the present investigation. The non-dimensional velocity, microrotation, temperature and concentration profiles are displayed graphically for different values of coupling number, Soret and Dufour numbers. In addition, the skin-friction coefficient, the Nusselt number and Sherwood number are shown in a tabular form.     

The flow of a micropolar fluid through a porous channel with expanding or contracting walls

The flow of a micropolar fluid in a porous channel with expanding or contracting walls is investigated. The governing equations are reduced to ordinary ones by using similar transformations. Homotopy analysis method (HAM) is employed to obtain the expressions for the velocity fields and microrotation fields. Graphs are sketched for the effects of some values of parameters, especially the expansion ratio, on the velocity and microrotation fields and associated dynamic characteristics are analyzed in detail.     

Magnetohydrodynamic free convection and mass transfer flow in micropolar fluid with constant suction

An analysis is presented for the problem of free convection with mass transfer flow for a micropolar fluid bounded by a vertical infinite surface under the action of a transverse magnetic field. Approximate solutions of the coupled nonlinear governing equations are obtained for different values of the microrotation- and the magnetic-parameters. Numerical calculations are carried out for the various parameters entering into the problem. Velocity, angular velocity, temperature and concentration profiles are shown graphically. The numerical values of the skin friction, the wall couple stress, the rate of heat transfer and the concentration gradient at the wall are entered in tables.     

The analysis of the flow of a micropolar fluid between two orthogonally moving porous disks with counter rotating directions

The present work investigates the unsteady, imcompressible flow of a micropolar fluid between two orthogonally moving porous coaxial disks. The lower and upper disks are rotating with the same angular speed in counter directions. The flows are driven by the contraction and the rotation of the disks. An extension of the Von Kármán type similarity transformation is proposed and is applied to reduce the governing partial differential equations (PDEs) to a set of non-linear coupled ordinary differential equations (ODEs) in dimensionless form. These differential equations with appropriate boundary conditions are responsible for the flow behavior between large but finite coaxial rotating disks. The analytical solutions are obtained by employing the homotopy analysis method. The effects of some various physical parameters like the expansion ratio, the rotational Reynolds number, the permeability Reynolds number, and micropolar parameters on the velocity fields are observed in graphs and discussed in detail.     

Effect of Hall current on the velocity and temperature distributions of Couette flow with variable properties

The unsteady hydromagnetic Couette flow and heat transfer between two parallel porous plates is studied with the Hall effect and temperature dependent properties. The fluid is acted upon by a constant pressure gradient and an external uniform magnetic field as well as uniform suction and injection applied perpendicular to the parallel plates. A numerical solution for the governing non-linear equations of motion and the energy equation are obtained. The effect of the Hall term and the temperature-dependent viscosity and thermal conductivity on both velocity and temperature distributions is examined.     

Electro-osmotically actuated oscillatory flow of a physiological fluid on a porous microchannel subject to an external AC electric field having dissimilar frequencies

Electro-osmotic flow of a physiological fluid with prominent micropolar characteristics, flowing over a microchannel has been analyzed for a situation, where the system is subject to the action of an external AC electric field. In order to account for the rotation of the micro-particles suspended in the physiological fluid, the fluid has been treated as a micropolar fluid. The microchannel is considered to be bounded by two porous plates executing oscillatory motion. Such motion of the plates will normally induce oscillatory flow of the fluid. The governing equations of the fluid include a second-order partial differential equation depicting Gauss’s law of electrical charge distributions and two other partial differential equations of second order that arise out of the laws of conservation of linear and angular momenta. These equations have been solved under the sole influence of electrokinetic forces, by using appropriate boundary conditions. This enabled us to determine explicit analytical expressions for the electro-osmotic velocity of the fluid and the microrotation of the suspended micro-particles. These expressions have been used to obtain numerical estimates of important physical variables associated with the oscillatory electro-osmotic flow of a blood sample inside a micro-bio-fluidic device. The numerical results presented in graphical form clearly indicate that the formation of an electrical double layer near the vicinity of the wall causes linear momentum to reduce. In contrast, the angular momentum increases with the enhancement of microrotation of the suspended microparticles. The study will find important applications in the validation of results of further experimental and numerical models pertaining to flow in micro-bio-fluidic devices. It will also be useful in the improvement of the design and construction of various micro-bio-fluidic devices.     

Effect of viscous dissipation on natural convection flow between vertical parallel plates with time-periodic boundary conditions

This article investigates the natural convection flow of viscous incompressible fluid in a channel formed by two infinite vertical parallel plates. Fully developed laminar flow is considered in a vertical channel with steady-periodic temperature regime on the boundaries. The effect of internal heating by viscous dissipation is taken into consideration. Separating the velocity and temperature fields into steady and periodic parts, the resulting second order ordinary differential equations are solved to obtain the expressions for velocity, and temperature. The amplitudes and phases of temperature and velocity are also obtained as well as the rate of heat transfer and the skin friction on the plates. In presence of viscous dissipation, fluids of relatively small Prandtl number has higher temperature than the channel plates and as such, heat is being transferred from the fluid to the plate.     

Heat transfer over a stretching surface with variable heat flux in micropolar fluids

Heat transfer over a stretching surface with uniform or variable heat flux in micropolar fluids is investigated in this Letter. The boundary layer equations are transformed into ordinary differential equations, and then they are solved numerically by a finite-difference method. The effects of the material parameter K, Prandtl number Pr, velocity exponent parameter m, and heat flux exponent parameter n on the heat transfer characteristics are studied. It is found that the local Nusselt number is higher for micropolar fluids compared to Newtonian fluids.     

A numerical study of MHD generalized Couette flow and heat transfer with variable viscosity and electrical conductivity

The steady flow and heat transfer of an electrically conducting fluid with variable viscosity and electrical conductivity between two parallel plates in the presence of a transverse magnetic field is investigated. It is assumed that the flow is driven by combined action of axial pressure gradient and uniform motion of the upper plate. The governing nonlinear equations of momentum and energy transport are solved numerically using a shooting iteration technique together with a sixth-order Runge-Kutta integration algorithm. Solutions are presented in graphical form and given in terms of fluid velocity, fluid temperature, skin friction and heat transfer rate for various parametric values. Our results reveal that the combined effect of magnetic field, viscosity, exponents of variable properties, various fluid and heat transfer dimensionless quantities and the electrical conductivity variation, have significant impact on the hydromagnetic and electrical properties of the fluid.     

Heat Transfer and Entropy in a Vertical Porous Plate Subjected to Suction Velocity and MHD

This article presents an investigation of heat transfer in a porous medium adjacent to a vertical plate. The porous medium is subjected to a magnetohydrodynamic effect and suction velocity. The governing equations are nondepersonalized and converted into ordinary differential equations. The resulting equations are solved with the help of the finite difference method. The impact of various parameters, such as the Prandtl number, Grashof number, permeability parameter, radiation parameter, Eckert number, viscous dissipation parameter, and magnetic parameter, on fluid flow characteristics inside the porous medium is discussed. Entropy generation in the medium is analyzed with respect to various parameters, including the Brinkman number and Reynolds number. It is noted that the velocity profile decreases in magnitude with respect to the Prandtl number, but increases with the radiation parameter. The Eckert number has a marginal effect on the velocity profile. An increased radiation effect leads to a reduced thermal gradient at the hot surface.     

Entropy production in the flow over a swirling stretchable cylinder

In the present work, the entropy generation due to the heat transfer and fluid friction irreversibility is investigated numerically for a three-dimensional flow induced by rotating and stretching motion of a cylinder. The isothermal boundary conditions are taken into account for the heat transfer analysis. The similarity transformations are utilized to convert the governing partial differential equations to ordinary differential equations. Resulting nonlinear differential equations are solved using a numerical scheme. Expressions for the entropy generation number, the Nusselt number and the Bejan number are obtained and discussed through graphs for various physical parameters. An analysis has been made to compare the heat transfer irreversibility with fluid friction irreversibility using the expression of the Bejan number. It is found that the surface is a durable source of irreversibility and the curvature of cylinder is to enhance the fluid friction irreversibility.     

Variable fluid properties and variable heat flux effects on the flow and heat transfer in a non-Newtonian Maxwell fluid over an unsteady stretching sheet with slip velocity

The effects of variable fluid properties and variable heat flux on the flow and heat transfer of a non-Newtonian Maxwell fluid over an unsteady stretching sheet in the presence of slip velocity have been studied. The governing differential equations are transformed into a set of coupled non-linear ordinary differential equations and then solved with a numerical technique using appropriate boundary conditions for various physical parameters. The numerical solution for the governing non-linear boundary value problem is based on applying the fourth-order Runge-Kutta method coupled with the shooting technique over the entire range of physical parameters. The effects of various parameters like the viscosity parameter, thermal conductivity parameter, unsteadiness parameter, slip velocity parameter, the Deborah number, and the Prandtl number on the flow and temperature profiles as well as on the local skin-friction coefficient and the local Nusselt number are presented and discussed. Comparison of numerical results is made with the earlier published results under limiting cases.     

Numerical modeling of nanofluid flow and heat transfer in a quartered gearwheel-shaped heat exchanger using FVM

The numerical modeling of natural convection fluid flow and heat transfer in a quarter of gearwheel-shaped heat exchanger is carried out. The heat exchanger is included with internal active square bodies. These bodies have hot and cold temperatures with different thermal arrangements. Three different thermal arrangements are considered and showed with Case A, Case B and Case C. The CuO-water nanofluid is selected as operating fluid. The Koo-Kleinstreuer-Li (KKL) correlation is utilized to estimate the dynamic viscosity and thermal conductivity. In addition, the shapes of nanoparticles are taken account in the analysis. The Rayleigh number, nanoparticle concentration and thermal arrangements of internal active bodies are the governing parameters. The impacts of these parameters on the fluid flow, heat transfer rate, local and total entropy generation and heatlines are studied, comprehensively. The results show that the heat transfer rate enhances with increasing of Rayleigh number and nanoparticle concentration. Moreover, the thermal arrangement of internal active bodies has considerable effect on the heat transfer between heat sources and heat sinks. On the other hand, the total entropy generation enhances and decreases with increasing of Rayleigh number and nanoparticle concentration, respectively.     

离散发热器件基于(火积)耗散率最小和最高温度最小的构形优化比较

建立了导热基座上圆柱体离散发热器件的三维湍流散热模型,基于构形理论,考虑空气变物性及可压缩性和黏性耗散,研究了器件材料的热导率、热源强度和流体流速对器件最高温度、基于(火积)耗散定义的当量热阻和平均Nu数的影响.结果表明:在总发热功率一定的条件下,以器件最高温度和当量热阻为性能指标进行热设计,均存在最优热源强度分布使得散热性能最优.当各热源强度相同且热源热导率小于基座热导率时,提高热源热导率可明显改善散热性能;将热源热导率沿流动方向从低到高布置可降低器件最高温度,而将热源热导率均匀布置可使当量热阻最小.所得结果可为实际热设计中不同材质和不同发热率的电子器件最优布置提供理论支撑.     

New thermodynamics of entropy generation minimization with nonlinear thermal radiation and nanomaterials

This research addressed entropy generation for MHD stagnation point flow of viscous nanofluid over a stretching surface. Characteristics of heat transport are analyzed through nonlinear radiation and heat generation/absorption. Nanoliquid features for Brownian moment and thermophoresis have been considered. Fluid in the presence of constant applied inclined magnetic field is considered. Flow problem is mathematically modeled and governing expressions are changed into nonlinear ordinary ones by utilizing appropriate transformations. The effects of pertinent variables on velocity, nanoparticle concentration and temperature are discussed graphically. Furthermore Brownian motion and thermophoresis effects on entropy generation and Bejan number have been examined. Total entropy generation is inspected through various flow variables. Consideration is mainly given to the convergence process. Velocity, temperature and mass gradients at the surface of sheet are calculated numerically.