Application of the Time-Domain Impedance Boundary Condition to Large-Eddy Simulation of Combustion Instability in a Shear-Coaxial High Pressure Combustor

The time-domain impedance boundary condition (TDIBC) is used within a large-eddy simulation (LES) framework to investigate self-sustained longitudinal combustion instability in the Continuously Variable Resonance Combustor (CVRC) rig, a high-pressure, shear-coaxial injector combustor studied experimentally at Purdue University. A modified version of the constant mass characteristic boundary condition is used to account for the impedance at the oxidizer inlet, which is truncated and therefore becomes an approximation of the full inlet. Both linear and non-linear models for the inlet reflection coefficients are developed and compared against the full injector LES. The CVRC rig exhibits different amplitude levels of the pressure oscillation depending on the length of the oxidizer injector, and thus, offers a range of conditions to evaluate the use of the TDIBC. The combustor with a truncated oxidizer injector length of 2.05 cm is used to simulate conditions equivalent of three different oxidizer injector lengths of 9 cm, 12 cm and 14 cm, which are known to exhibit semi-stable, unstable and highly unstable behavior, respectively. The results are compared with LES that explicitly resolve the full oxidizer post without impedance. It is shown that the prediction by the non-linear reflection coefficient model is much better than the linear model. Further analysis is carried out to highlight the strengths and the limitations of the model.     

LES of a Multi-burner Annular Gas Turbine Combustor

In this study, Large Eddy Simulation (LES) has been used to predict the flow, mixing and combustion in both a single burner laboratory gas turbine combustor and in an 18 burner annular combustor, having identical cross sections. The LES results for the single burner laboratory combustor are compared with experimental data for a laboratory model of this combustor, and with other LES predictions, with good agreement. An explicit finite volume based LES model, using the mixed subgrid model together with a partially stirred reactor model for the turbulence chemistry interactions, is used. For the annular combustor, with the swirlers parameterized by jet inflow boundary conditions, we have investigated the influence of the a-priori unknown combustor exit impedance, the influence of the swirler characteristics and the fuel type. The combustion chemistry of methane–air and n-decane–air combustion is modeled by a two-step reaction mechanism, whereas NOx is separately modeled with a one-step mechanism. No experimental data exists for the annular combustor, but these results are compared with the single burner LES and experimental results available. The combustor exit impedance, the swirler- and fuel characteristics all seem to influence the combusting flow through the acoustics of the annular combustor. To examine this in greater detail time-series and eigenmodes of the combustor flow fields are analyzed and comparisons are made also with results from conventional thermoacoustic eigenmode analysis, with reasonable agreement. The flow and pressure distributions in the annular combustor are described in some detail and the mechanisms by which the burners interact are outlined.     

A reformulated synthetic turbulence generation method for a zonal RANS–LES method and its application to zero-pressure gradient boundary layers

A synthetic turbulence generation (STG) method for subsonic and supersonic flows at low and moderate Reynolds numbers to provide inflow distributions of zonal Reynolds-averaged Navier–Stokes (RANS) – large-eddy simulation (LES) methods is presented. The STG method splits the LES inflow region into three planes where a local velocity signal is decomposed from the turbulent flow properties of the upstream RANS solution. Based on the wall-normal position and the local flow Reynolds number, specific length and velocity scales with different vorticity content are imposed at the inlet plane of the boundary layer. The quality of the STG method for incompressible and compressible zero-pressure gradient boundary layers is shown by comparing the zonal RANS–LES data with pure LES, pure RANS, and direct numerical simulation (DNS) solutions. The distributions of the time and spanwise wall-shear stress, Reynolds stress distributions, and two point correlations of the zonal RANS–LES simulations are smooth in the transition region and in good agreement with the pure LES and reference DNS findings. The STG approach reduces the RANS-to-LES transition length to less than four boundary-layer thicknesses.     

The effect of inflow conditions on the transition to turbulence in large eddy simulations of spatially developing mixing layers

Large Eddy Simulations (LES) of spatially developing turbulent mixing layers have been performed for flows of uniform density and Reynolds numbers of up to 50,000 based on the visual thickness of the layer and the velocity difference across it. On a fine LES grid, a validation simulation performed with a hyperbolic tangent inflow profile produces flow statistics that compare extremely well with reference Direct Numerical Simulation (DNS) data. An inflow profile derived from laminar Blasius profiles produces a flow that is significantly different to the reference DNS, particularly with respect to the initial development of the flow. When compared with experimental data, however, it is the boundary layer-type inflow simulation produces the better prediction of the flow statistics, including the mean transition location. It is found that the boundary layer inflow condition is more unstable than the hyperbolic tangent inlet profile. A suitably designed coarse LES grid produces good predictions of the mean transition location with boundary layer inflow conditions at a low computational cost. The results suggest that hyperbolic tangent functions may produce unreliable DNS data when used as the initial condition for studies of the transition in the mixing layer flow.     

Simulation of supersonic turbulent flow in the vicinity of an inclined backward-facing step

Large eddy simulation (LES) is a viable and powerful tool to analyse unsteady three-dimensional turbulent flows. In this article, the method of LES is used to compute a plane turbulent supersonic boundary layer subjected to different pressure gradients. The pressure gradients are generated by allowing the flow to pass in the vicinity of an expansion–compression ramp (inclined backward-facing step with leeward-face angle of 25°) for an upstream Mach number of 2.9. The inflow boundary condition is the main problem for all turbulent wall-bounded flows. An approach to solve this problem is to extract instantaneous velocities, temperature and density data from an auxiliary simulation (inflow generator). To generate an appropriate realistic inflow condition to the inflow generator itself the rescaling technique for compressible flows is used. In this method, Morkovin's hypothesis, in which the total temperature fluctuations are neglected compared with the static temperature fluctuations, is applied to rescale and generate the temperature profile at inlet. This technique was successfully developed and applied by the present author for an LES of subsonic three-dimensional boundary layer of a smooth curved ramp. The present LES results are compared with the available experimental data as well as numerical data. The positive impact of the rescaling formulation of the temperature is proven by the convincing agreement of the obtained results with the experimental data compared with published numerical work and sheds light on the quality of the developed compressible inflow generator.     

Large Eddy Simulation of a Controlled Diffusion Compressor Cascade

In this research a Controlled Diffusion (CD) compressor cascade stator blade is simulated at a Reynolds number of ??700,000, based on inflow velocity and chord length, using Large Eddy Simulation (LES). A wide range of flow inlet angles are computed, including conditions near the design angle, and at high negative and positive incidence. At all inlet angles the surface pressure distributions are well-predicted by the LES. Near the design angle the computed suction side boundary layer thickness agrees well with experimental data, whilst the pressure side boundary layer is poorly predicted due to the inability of LES to capture natural boundary layer transition on the present grid. A good estimation of the loss is computed near the design angle, whilst at both high positive and negative incidences the loss is less well predicted owing to discrepancies between the computed and experimental boundary layer thickness. At incidences above the design angle a laminar separation bubble forms near the leading edge of the suction surface, which undergoes a transition to turbulence. Similar behaviour is noted on the pressure surface at negative incidence. At high negative incidence contra-rotating vortex pairs are found to form around the leading edge in response to an unsteady stagnation line across the span of the blade. Such structures are not apparent in time-averaged statistical data due to their highly-transient nature.     

Reconstruction of turbulent fluctuations for hybrid RANS/LES simulations using a Synthetic-Eddy Method

A coupling methodology between an upstream Reynolds Averaged Navier–Stokes (RANS) simulation and a Large Eddy Simulation (LES) further downstream is presented. The focus of this work is on the RANS-to-LES interface inside an attached turbulent boundary layer, where an unsteady LES content has to be explicitly generated from a steady RANS solution. The performance of the Synthetic-Eddy Method (SEM), which generates realistic synthetic eddies at the inflow of the LES, is investigated on a wide variety of turbulent flows, from simple channel and square duct flows to the flow over an airfoil trailing edge. The SEM is compared to other existing methods of generation of synthetic turbulence for LES, and is shown to reduce substantially the distance required to develop realistic turbulence downstream of the inlet.     

A Band-Width Filtered Forcing Based Generation of Turbulent Inflow Data for Direct Numerical or Large Eddy Simulations and its Application to Primary Breakup of Liquid Jets

Direct Numerical Simulation (DNS) and Large Eddy Simulation (LES) of spatially inhomogeneous flows strongly depend on turbulent inflow boundary conditions. Realistic coherent structures need to be prescribed to avoid the immediate damping of random velocity fluctuations. A new turbulent inflow data generation method based on an auxiliary simulation of forced turbulence in a box is presented. The new methodology combines the flexibility of the synthetic turbulence generation with the accuracy of precursor simulation methods. In contrast to most auxiliary simulations, the new approach provides full control over the turbulence properties and computational costs remain reasonable. The lack of physical information and artificiality attested with pseudo-turbulence methods is overcome since the inflow data stems from a solution of the Navier-Stokes equations. The generated velocity fluctuations are by construction divergence-free and exhibit the non-Gaussian characteristics of turbulence. The generated inflow data is applied to the simulation of multiphase primary breakup.     

Persistent Non-Homogeneous Features in Periodic Channel-Flow Simulations

Time-resolved simulations of simple shear flows, such as boundary layers and channel flows, are often used as precursor simulations that provide the inflow-boundary conditions for simulations of turbulent flows in and around more complex geometries. For both the precursor and main simulations, the accuracy of the calculated mean flow relies on the simulations being run for long enough to contain the full spectrum of turbulent processes, resulting in a physically valid statistical representation. The time scale needed to achieve convergence of statistics from fundamental studies of simple shear flows is based on data that is averaged in spatial directions in which the flow geometry is invariant—i.e. directions in which homogeneity is expected to be the limiting case. This paper reports and discusses features that represent significant departures from spatial homogeneity of the flow in such a direction, that persist on this time scale, thereby limiting the spatial uniformity of a simulated turbulent inflow. The persistence and size of the features is quantified. A range of simulations for different combinations of domain dimensions and flow parameters has been performed with two independent codes (DNS and LES) to explore how the persistence and size are controlled. While no definitive physical mechanism has been identified, it is suggested that the features may be related to experimental observations of persistent structures in wall-bounded flows.     

Large eddy simulation on the effect of free-stream turbulence on bypass transition

The effect of free-stream turbulence (FST) on bypass transition in a zero-pressure-gradient boundary layer is investigated by means of Large Eddy Simulation (LES). The broadband turbulent inflow is synthesized to validate the feasibility of LES. Both a zero-thickness plate and one with super-ellipse leading-edge are addressed. The calculated Reynolds-averaged fields are compared with experimental data and decent agreement is achieved. Instantaneous fields show the instability occurs in the lifted low-speed streaks similar to earlier DNS results, which can be ascribed to outer mode. Various inflows with bi-/tri-mode interaction are specified to analyze effects of particular frequency mode on the instability pattern and multifarious transition or non-transition scenarios are obtained. Outer instability is observed in the cases with one low-frequency mode and one high-frequency mode inflow as reported by Zaki and Durbin (2005), and with one more high-frequency mode appended. Inner instability is observed in the case with a low-frequency dominant inflow, while the high-frequency mode is indispensable to induce the secondary instability. Furthermore, the results show that the transition onset is highly sensitive to low-frequency mode while the transition rate is highly sensitive to high-frequency mode. Finally, the formational frequency of turbulent spot (FFTS) is counted and the frequency of laminar streaks is demonstrated by spectral analysis.     

Time-domain Impedance Boundary Conditions for Computational Acoustics and Aeroacoustics

This paper reviews the short history, motivation, numerical and theoretical issues, and development of methods for treating a boundary as a reflective/absorptive surface for the time-domain computation of waves in general and acoustic waves in particular. It begins with the extension and implementation of the frequency-domain impedance to a time-domain impedance-equivalent boundary condition (TDIBC), and illustrates how the theoretical, numerical, and implementation issues are addressed and resolved for acoustic/aeroacoustic applications. Comments are also made on the extendibility and applicability of the concept and TDIBC to other fields and types of problems.     

Direct numerical simulation of the flow in the intake pipe of an internal combustion engine

The incompressible flow in the intake pipe of a laboratory-scale internal combustion engine at Reynolds numbers corresponding to realistic operating conditions was studied with the help of direct numerical simulations. The mass flow through the curved pipe remained constant and the valve was held fixed at its halfway-open position, as is typically done in steady flow engine test bench experiments for the optimization of the intake manifold. The flow features were identified as the flow evolves in the curved intake pipe and interacts with the cylindrical valve stem. The sensitivity of the flow development on the velocity profile imposed at the inflow boundary was assessed. It was found that the flow can become turbulent very quickly depending on the inflow profile imposed at the pipe inlet, even though no additional noise was added to mimic turbulent velocity fluctuations. The transition to turbulence results from competing and interacting instability mechanisms both at the inner curved part of the intake pipe and at the valve stem wake. Azimuthal variations in the local mass flow exiting the intake pipe were identified, in agreement with previously reported measurement results, which are known to play an important role in the charging motion inside the cylinder of an internal combustion engine.     

Highly-resolved LES and PIV Analysis of Isothermal Turbulent Opposed Jets for Combustion Applications

Turbulent opposed jet (TOJ) burners are an interesting test case for fundamental combustion research and a good benchmark for the available modelling approaches. However, these opposed jet flames strongly depend on the turbulence generation inside the nozzle, which is usually achieved through a perforated plate upstream of the nozzle exit. The present work investigates the flow from these perforated plates and the subsequent turbulence generation in great detail. We present results from highly-resolved large eddy simulations (LES) of the in-nozzle flow in turbulent opposed jets alongside state-of-the-art particle image velocimetry (PIV) at standard and high repetition rates taken inside a glass nozzle. The in-nozzle PIV data provides the LES inflow conditions with unprecedented detail, which are used to follow the initial jet development behaviour known from PIV, before jet coalescence, turbulence production and decay further downstream in the nozzles are successfully predicted. In regions where the PIV experiment suffers from inherent limitations like reflections and the velocity bias, the LES data is available to still obtain a detailed picture of the flow. The sensitivity of the simulations to various physical and numerical parameters is discussed in detail. Results from LES and PIV are compared qualitatively and quantitatively in terms of first and second moments of velocity, temporal autocorrelations, and energy density spectra. Significant deviations are found in the frequency (20%) and strength of vortex shedding from the inlet plane only, whereas the qualitative and quantitative agreement between simulation and experiment is otherwise excellent throughout, implying that a successful large eddy simulation of a turbulent opposed jet can be performed in a domain that includes the perforated plates.     

A Simple Approach for Specifying Velocity Inflow Boundary Conditions in Simulations of Turbulent Opposed-Jet Flows

A new methodology is developed to specify inflow boundary conditions for the velocity field at the nozzle exit planes in turbulent counterflow simulations. The turbulent counterflow configuration consists of two coaxial opposed nozzles which emit highly-turbulent streams of varying species compositions depending on the mode considered. The specification of velocity inflow boundary conditions at the nozzle exits in the counterflow configuration is non-trivial because of the unique turbulence field generated by the turbulence generating plates (TGPs) upstream of the nozzle exits. In the method presented here, a single large-eddy simulation (LES) is performed in a large domain that spans the region between the TGPs of the nozzles, and the time series of the velocity fields at the nozzle exit planes are recorded. To provide inflow boundary conditions at the nozzle exit planes for simulations under other conditions (e.g., different stream compositions, bulk velocity, TGP location), transformations are performed on the recorded time series: the mean and r.m.s. (root-mean-square) quantities of velocity, as well as the longitudinal integral length scale on the centerline, at the nozzle exits in simulations are matched to those observed in experiments, thereby matching the turbulent Reynolds number R e _t . The method is assessed by implementing it in coupled large-eddy simulation/probability density function (LES/PDF) simulations on a small cylindrical domain between the nozzle exit planes for three different modes of the counterflow configuration: N ₂ vs. N ₂; N ₂ vs. hot combustion products; and C H ₄/N ₂ vs. O ₂. The inflow method is found to be successful as the first and second moments of velocity from the LES/PDF simulations agree well with the experimental data on the centerline for all three modes. This simple yet effective inflow strategy can be applied to eliminate the computational cost required to simulate the flow field upstream of the nozzle exits. It is also emphasized that, in addition to the predicted time series data, the availability of experimental data close to the nozzle exit planes plays a key role in the success of this method.     

Large Eddy Simulation of an Internal Combustion Engine Using an Efficient Immersed Boundary Technique

This paper presents highly resolved large eddy simulations (LES) of an internal combustion engine (ICE) using an immersed boundary method (IBM), which can describe moving and stationary boundaries in a simple and efficient manner. In this novel approach, the motion of the valves and the piston is modeled by Lagrangian particles, whilst the stationary parts of the engine are described by a computationally efficient IBM. The proposed mesh-free technique of boundary representation is simple for parallelization and suitable for high performance computing (HPC). To demonstrate the method, LES results are presented for the flow and the combustion in an internal combustion engine. The Favre-filtered Navier-Stokes equations are solved for a compressible flow employing a finite volume method on Cartesian grids. Non-reflecting boundary conditions are applied at the intake and the exhaust ports. Combustion is described using a flame surface density (FSD) model with an algebraic reaction rate closure. A simplified engine with a fixed axisymmetric valve (see Appendix A) is employed to show the correctness of the method while avoiding the uncertainties which may be induced by the complex engine geometry. Three test-cases using a real engine geometry are investigated on different grids to evaluate the impact of the cell size and the filter width. The simulation results are compared against the experimental data. A good overall agreement was found between the measurements and the simulation data. The presented method has particular advantages in the efficient generation of the grid, high resolution and low numerical dissipation throughout the domain and an excellent suitability for massively parallel simulations.     

Large Eddy Simulation of the Flow Over a Three-Dimensional Hill

This paper investigates the use of LES for a flow around a three-dimensional axisymmetric hill. Two aspects of this simulation in particular are discussed here, the resolution and the inlet boundary conditions. In contrast to the LES of flows with sharp edge separations which do not require the near-wall dynamics to be fully resolved, the hill flow LES relies on the resolution of the upstream boundary layer in order to provoke the separation at a correct position. Although around 15 ×10⁶ computational cells were used, the resolution of streaky structures in the near-wall region that are important for a LES is not achieved. Two different inlet boundary conditions were used: the steady experimental profile and the time-dependent boundary conditions produced from DNS results of low Reynolds number channel flow. No significant improvement in the results was obtained with the unsteady inlet condition. This indicates that, although the unsteady inlet boundary conditions may be necessary for a successful LES of this flow, they must be followed with the resolution of the boundary layer for a successful LES.     

Sensitivity analysis of LES–CMC predictions of piloted jet flames

The sensitivity of Large Eddy Simulation with Conditional Moment Closure (LES–CMC) simulations of the Sandia piloted jet Flames D and F to various parameters have been investigated. It was found that while an LES grid may sufficiently resolve velocity fields, the conditional scalar dissipation rate obtained may still be affected by grid size due to the calculation of sub-grid scalar dissipation rate, and this can affect the degree of localised extinction predicted. A study of the relative size of the terms in the CMC equation during an extinction/reignition event showed that transport, including in the cross stream direction, plays a key role. The results are sensitive to the choice of inlet boundary conditions as extinction is only observed when the inert-mixing distributions in mixture fraction space are used as inlet conditions for the CMC equation in the primary jet and air jets.     

Modelling of a Premixed Swirl-stabilized Flame Using a Turbulent Flame Speed Closure Model in LES

This paper proposes a combustion model based on a turbulent flame speed closure (TFC) technique for large eddy simulation (LES) of premixed flames. The model was originally developed for the RANS (Reynolds Averaged Navier Stokes equations) approach and was extended here to LES. The turbulent quantities needed for calculation of the turbulent flame speed are obtained at the sub grid level. This model was at first experienced via an test case and then applied to a typical industrial combustor with a swirl stabilized flame. The paper shows that the model is easy to apply and that the results are promising. Even typical frequencies of arising combustion instabilities can be captured. But, the use of compressible LES may also lead to unphysical pressure waves which have their origin in the numerical treatment of the boundary conditions.