Electrochemical properties of TiO2 nanoparticle/nanorod composite photoanode for dye-sensitized solar cells

A unique composite of TiO₂ nanoparticles (NPs) and nanorods (NRs) has been used to fabricate a photoelectrode for developing dye-sensitized solar cells (DSSCs) with higher sensitivity. The TiO₂ nanorods were synthesized using a mechanical process, in which electrospun TiO₂ nanofibers was grinded in a controlled way to obtain uniform size distribution. The characteristics of electron transport, recombination lifetime and charge collection were investigated by intensity-modulated photocurrent spectroscopy (IMPS) and intensity-modulated photovoltage spectroscopy (IMVS). Photoelectrodes prepared with the composites of NRs and NPs showed significant improvements in electron transportation compared to only NP photoelectrodes, which would enhance the photovoltaic performance of DSSCs. IMPS and IMVS measurements show that fast electron transport and slightly decreased recombination lifetime resulted in the improvement of efficiency. The highest energy conversion efficiency obtained from the photoelectrodes fabricated with the as-prepared rutile TiO₂ nanofibers at 5 wt% NR content was up to 6.1% under AM1.5G solar illumination. The results demonstrate that the composite nanostructure can take advantage of both the fast electron transport of the nanorods and the high surface area of the nanoparticles.     

Photovoltaic properties of ZnO photoanode incorporating with CNTs for dye-sensitized solar cell application

Zinc oxide carbon nanotube (ZnO-CNTs) thin films were prepared by a chemical bath deposition (CBD) method and immersed in N719 dye for 24 h. The structure and surface morphology of the samples was captured by X-ray diffraction (XRD) and field effect scanning electron microscopy (FESEM) unit, respectively. The photovoltaic properties of ZnO- and ZnO-CNT-based dye-sensitized solar cells (DSSCs) were measured by considering the power conversion efficiency (η), photocurrent density (J _sc), open-circuit voltage (V _oc), and fill factor (FF). The cell's efficiency doped with single-walled carbon nanotubes (SWCNTs) and multi-walled carbon nanotubes (MWCNTs) reached 0.65 and 0.28 %, respectively. ZnO-based DSSC generated only η?=?0.003 %. The electrochemical impedance spectroscopy (EIS) unit was employed to investigate the electron transport properties such as effective electron lifetime (τ _eff), effective electron chemical diffusion coefficient (D _eff), and effective electron diffusion length (L _n ). The addition of CNTs has enhanced the photovoltaic properties of the DSSCs and reduced the recombination effect inside the solar cell.     

Investigation of the fill factor of dye-sensitized solar cell based on ZnO nanowire arrays

The fill factor of dye-sensitized solar cells based on the ZnO nanowire array is very low, which is usually ascribed to a rapid charge recombination. In this article, the influence on the fill factor of ZnO nanowire array cell is investigated and discussed by comparing dark current and decay rate of open circuit potential of the ZnO nanowire array cell with those of the ZnO nanoparticle cell, TiO₂ nanoparticle cell and TiO₂-coated ZnO nanowire array cell. The results demonstrate that the low fill factor of the ZnO nanowire array cell is largely caused by a rapid decrease of electron injection efficiency rather than a rapid charge recombination, which is decided by the absorption nature of Ru-complexed dye molecules on ZnO surface and repellency of radial electric field. The fill factor of the ZnO nanowire array cell can be improved by coating ZnO nanowires with a wide band gap semiconductor material or metal oxide insulator.     

Hybrid photoanode films based on sparse ZnO rod array-TiO2 nanoparticles in dye-sensitized solar cells

ZnO-TiO2 hybrid photoanodes were fabricated via the doctor-blade method by integrating vertically-grown sparse ZnO arrays with hydrothermal TiO2 nanoparticles. A special surface-coating technique was developed to deposit a thin TiO2 layer on the surface of ZnO rods. Microstructure, optical and photoelectrochemical performance of the hybrid photoanodes were investigated. The denser ZnO array exhibited bad filling behavior of nanoparticles in the interspace of ZnO rods, strong scattering and low conversion efficiency (0.27%). The sparser array showed a much better integrated microstructure, improved transmittance and high conversion efficiency (2.68%). The surface modification of ZnO rods by the TiO2 thin layer was found useful in improving the interfacial microstructure between the ZnO rod and the TiO2 bulk film, and the total conversion efficiency of 3.01% was achieved, higher than that of the pure TiO2 nanoparticle cell (2.93%). The increased scattering effects on the incident light, the enhanced electron transportation at TiO2/dye/electrolyte interface, and the inhabited recombination were responsible for this improvement.     

Influence of ZnO growth temperature on the performance of dye-sensitized solar cell utilizing TiO2-ZnO composite film photoanode

Ionics - TiO2 nanoflower (NF)-ZnO composite films were synthesized by using liquid phase deposition (LPD) and dip coating method. At the lower growth temperature below 50 °C, the...     

Co-sensitized quantum dot solar cell based on ZnO nanowire

An efficient photoelectrode is fabricated by sequentially assembled CdS and CdSe quantum dots (QDs) onto a ZnO-nanowire film. As revealed by UV-vis absorption spectrum and scanning electron microscopy (SEM), CdS and CdSe QDs can be effectively adsorbed on ZnO-nanowire array. Electrochemical impedance spectroscopy (EIS) measured demonstrates that the electron lifetime for ZnO/CdS/CdSe (13.8 ms) is calculated longer than that of ZnO/CdS device (6.2 ms), which indicates that interface charge recombination rate is reduced by sensitizing CdSe QDs. With broader light absorption range and longer electron lifetime, a power conversion efficiency of 1.42% is achieved for ZnO based CdS/CdSe co-sensitized solar cell under the illumination of one Sun (AM 1.5G, 100 mW cm⁻²).     

Improvement of ZnO nanorod-based dye-sensitized solar cell efficiency by Al-doping

The current study investigates the performance of dye-sensitized solar cells (DSSCs) based on Al-doped and undoped ZnO nanorod arrays synthesized by a simple hydrothermal method. Current density-voltage (J-V) characterizations indicate that Al-doping in ZnO crystal structure can significantly improve current densities and the energy conversion efficiency (η) of ZnO nanorod-based DSSCs. The maximum η, 1.34%, was achieved in DSSC when Al-doped ZnO nanorod arrays were grown in 0.04 M zinc acetate dihydrate solution with 5 mM aluminum nitrate nonahydrate. This result represents a large increase of η in Al-doped ZnO nanorod-based DSSCs as compared to undoped (0.05%). The improved DSSC photovoltaic performance can be attributed to two main factors: (1) increased light harvesting efficiency due to a large amount of N719 adsorbed on the large surface area of Al-doped ZnO nanorod arrays, and (2) increased electrical conductivity due to A1³⁺ ion doped into the ZnO lattice at the divalent Zn²⁺ site, allowing electrons to move easily into the Al-doped ZnO conduction band.     

染料敏化纳米ZnO薄膜太阳电池机理初探

讨论利用ZnO代替TiO2作为光阳极制作染料敏化薄膜太阳电池的可行性.使用LSV法，IR光谱和UV-vis光谱探讨了电池的工作机理和性能，并与染料敏化纳米TiO2薄膜太阳电池作了比较.结果发现ZnO薄膜表面与染料的吸附键合力太弱是导致ZnO太阳电池效率低下的主要原因. 关键词： 纳米ZnO 太阳电池 染料敏化 量子效率     

Growth and characterization of type-II ZnO/ZnTe core-shell nanowire arrays for solar cell applications

Large area, well-aligned type-II ZnO/ZnTe core-shell nanowire arrays have been fabricated on an a-plane sapphire substrate. The ZnO nanowires were grown in a furnace by chemical vapor deposition with gold as catalyst and then were coated with a ZnTe shell on the ZnO nanowires surface by a metal-organic chemical deposition chamber. The morphology and size distribution of the ZnO/ZnTe core-shell nanowire arrays were studied by scanning electron microscopy (SEM) and the crystal structure was examined by x-ray diffraction (XRD). Transmission measurement was used to study the optical properties of the core-shell nanowires. The results indicated that the ZnO/ZnTe core-shell nanowire arrays have good crystalline quality. In addition, it was found that the nanowire arrays have good light absorption characteristics and these properties make it suitable for making photovoltaic devices.     

Electrodeposition of zinc oxide/tetrasulfonated copper phthalocyanine hybrid thin film for dye-sensitized solar cell application

Hybrid film of zinc oxide (ZnO) and tetrasulfonated copper phthalocyanine (TSPcCu) was grown on an indium tin oxide (ITO) glass by one-step cathodic electrodeposition from aqueous mixtures of Zn(NO₃)₂, TSPcCu and KCl. The addition of TSPcCu strongly influences the morphology and crystallographic orientation of the ZnO. The nanosheets stack of ZnO leads to a porous surface structure which is advantageous to further adsorb organic dyes. The photovoltaic properties were investigated by assembling the DSSC device based on both the only ZnO film and the ZnO/TSPcCu hybrid films. Photoelectrochemical analysis revealed that the optimized DSSC device with TSPcCu represented a more than three-fold improvement in power conversion efficiency than the device without TSPcCu. The DSSC based on ZnO/TSPcCu hybrid films demonstrates an open circuit voltage of 0.308 V, a short circuit current of 90 μA cm⁻², a fill factor of 0.26, and a power conversion efficiency of 0.14%.     

Carbon nanofiber based CuO nanorod counter electrode for enhanced solar cell performance and adsorptive photocatalytic activity

Journal of Nanoparticle Research - A comprehensive study of the antibacterial (bacteriostatic and bactericidal) properties of non-doped carbon nanodots (CNDs), nitrogen-doped (N-doped), and...     

Oriented ZnO nanotubes arrays decorated with TiO2 nanoparticles for dye-sensitized solar cell applications

Dye-sensitized solar cells (DSSCs) based on a novel composite photoanode of TiO₂ nanoparticles coating on electrodeposited ZnO nanotube arrays are fabricated and characterized. An efficiency of 3.94 % is achieved for the composite cell, increasing 86.7 % than 2.11 % of the ZnO nanotubes cell. The short-circuit current (J _sc) and open-circuit voltage (V _oc) are also enhancing 52.9 % and 25.3 %, respectively. The improvements are because of the high surface area of TiO₂ nanoparticles, as well as fast electron transport and light scattering effect of ZnO nanotubes.     

Bilayer ZnO nanostructure fabricated by chemical bath and its application in quantum dot sensitized solar cell

Chemical bath method was used to synthesize bilayer ZnO nanostructure on ITO glass in the alkaline solution. As revealed by X-ray diffraction (XRD) and scanning electron microscopy (SEM), the product consists of a layered structure of ZnO nanorods at the bottom and nanoflower atop. The as-prepared sample was assembled in quantum dot sensitized solar cell (QDSSC), which obtained the incident photon to current conversion efficiency (IPCE) of 15% at 400 nm and power conversion efficiency (PCE) of 0.45%. Therefore, this novel bilayer ZnO nanostructure has the potential for application in solar cell device as the photoelectrode.     

Enhanced performance of bi-layer Nb2O5 coated TiO2 nanoparticles/nanowires composite photoanode in dye-sensitized solar cells

Dye sensitized solar cells (DSSCs) were fabricated based on coumarin NKX-2700 dye sensitized bi-layer photoanode and quasi-solid state electrolyte sandwiched together with cobalt sulfide coated counter electrode. A novel bi-layer photoanode has been prepared using composite mixtures of 90 wt.% TiO₂ nanoparticles + 10 wt.% TiO₂ nanowires (TNPWs) as active layer and Nb₂O₅ is coated on the active layer, which acts as scattering layer. Hafnium oxide (HfO₂) was applied over the TNPWs/Nb₂O₅ photoanode film, as a blocking layer. TiO₂ nanoparticles (TNPs), TiO₂ nanowires (TNWs) and TNPWs/Nb₂O₅ were characterized by X-ray diffractometer (XRD), scanning electron microscope (SEM) and transmission electron microscope (TEM). The sensitizing organic dye coumarin NKX-2700 displayed maximum absorption wavelength (λ_max) at 525 nm, which could be observed from the UV–vis spectrum. DSSC-1 fabricated with composite bi-layer photoanode revealed enhanced photo-current efficiency (PCE) as compared to other DSSCs and illustrated photovoltaic parameters; short-circuit current J_SC = 18 mA/cm², open circuit voltage (V_OC) = 700 mV, fill factor (FF) = 64% and PCE (η) = 8.06%. The electron transport and charge recombination behaviors of DSSCs were investigated by electrochemical impedance spectra (EIS) and the results illustrated that the DSSC-1 showed the lowest charge transport resistance (R_tr) and the longest electron lifetime (τ_eff). Therefore, in the present investigation, it could be concluded that the novel bi-layer photoanode with blocking layer increased the short circuit current, electron transport and suppressed the recombination of charge carriers at the photoanode/dye/electrolyte interface in DSSC-1.     

Plasmon enhanced CdS-quantum dot sensitized solar cell using ZnO nanorods array deposited with Ag nanoparticles as photoanode

CdS-quantum dot sensitized solar cell using ZnO nanorods (ZnO NRs) array deposited with Ag nanoparticles (Ag NPs) as photoanode was fabricated. Light absorption effect of Ag NPs on improvement of the cell performance was investigated. Performance improvement of metal nanoparticles (MNPs) was controlled by the structure design and architecture. Different decorations and densities of Ag NPs were utilized on the photoanode. Results showed that using 5% Ag NPs in the photoanode results in the increased efficiency, fill factor, and circuit current density from 0.28% to 0.60%, 0.22 to 0.29, and 2.18 mA/cm² to 3.25 mA/cm², respectively. Also, incident photon-to-current efficiencies (IPCE) results showed that cell performance improvement is related to enhanced absorption in the photoanode, which is because of the surface plasmonic resonance and light scattering of Ag NPs in the photoanode. Measurements of electrochemical impedance spectroscopy revealed that hole transfer kinetics increases with introduction of Ag NPs into photoanode. Also, it is shown that chemical capacitance increases with introduction of Ag NPs. Such increase can be attributed to the surface palsmonic resonance of Ag NPs which leads to absorption of more light in the photoanode and generation of more photoelectron in the photoanode.     

Analysis of electron recombination in dye-sensitized solar cell

A steady-state numerical model of dye-sensitized solar cell is based on continuity and transport equations for electrons, iodide and triiodide ions. The cell model consists of an active layer, where photovoltaic effect including diffusion of electrons in mesoporous TiO₂ and ions in electrolyte takes place, and a bulk electrolyte layer, where only ions diffuse. Exponential distribution of trap states in TiO₂ and Gaussian distributions of energy levels in the electrolyte within active layer are included in modeling of the recombination dynamics, according to Shockley-Read-Hall statistics and Marcus-Gerischer electron transfer theory. Recombinations at the front contact and a voltage drop at the platinum covered back contact are included in the model. Simulation results are compared with the measured current-voltage characteristics at different light intensities. In particular, light intensity dependence of open circuit voltage is studied over 4 decades. Optimization of cell efficiency regarding active layer and electrolyte layer thickness is carried out. Simulation results show that best efficiency is achieved when electrolyte layer thickness is minimized as much as possible and that active layer thickness is traded off with respect to recombination rates and/or diffusion limited current determined with the selection of the electrolyte.     

多环类苝四甲酸二酐插入层对ZnO纳米棒和聚合物复合太阳电池性能的影响

以ZnO纳米棒和聚[2-甲氧基-5-(2-乙基-己氧基)-1,4-苯撑乙烯撑](MEH-PPV)的复合体系作为光敏层制备了太阳电池.为了增大电池的光吸收,在ZnO纳米棒与MEH-PPV之间插入了有机n型小分子多环类苝四甲酸二酐(PTCDA),制备了不同厚度的PTCDA、结构为ITO/ZnO纳米棒/PTCDA/MEH-PPV/Au的太阳电池.实验发现,插入PTCDA后,电池在可见光区的吸收增强,光生激子数量增大,光电流密度增大.当蒸镀的PTCDA厚度为40 nm时,薄膜的粗糙度适中,表面形貌较为平滑,器件性 关键词： 有机太阳电池 ZnO纳米棒 聚合物     

Dye-sensitized solar cells based on ZnO nanowire array/TiO2 nanoparticle composite photoelectrodes with controllable nanowire aspect ratio

The ZnO nanowire (NW) array/TiO₂ nanoparticle (NP) composite photoelectrode with controllable NW aspect ratio has been grown from aqueous solutions for the fabrication of dye-sensitized solar cells (DSSCs), which combines the advantages of the rapid electron transport in ZnO NW array and the high surface area of TiO₂ NPs. The results indicate that the composite photoelectrode achieves higher overall photoelectrical conversion efficiency (η) than the ZnO NW alone. As a result, DSSCs based on the ZnO NW array/TiO₂ NP composite photoelectrodes get the enhanced photoelectrical conversion efficiency, and the highest η is also achieved by rational tuning the aspect ratio of ZnO NWs. With the proper aspect ratio (ca. 6) of ZnO NW, the ZnO NW array/TiO₂ NP composite DSSC exhibits the highest conversion efficiency (5.5 %). It is elucidated by the dye adsorption amount and interfacial electron transport of DSSCs with the ZnO NW array/TiO₂ NP composite photoelectrode, which is quantitatively characterized using the UV-Vis absorption spectra and electrochemical impedance spectra. It is evident that the DSSC with the proper aspect ratio of ZnO NW displays the high dye adsorption amount and fastest interfacial electron transfer.