Synthesis of Ca-P nanoparticles and fabrication of Ca-P/PHBV nanocomposite microspheres for bone tissue engineering applications

As the first step in producing totally bioresorbable osteoconductive composite scaffolds for bone tissue engineering using the selective laser sintering technology, bioresorbable nanoparticles of calcium phosphate (Ca-P) similar in composition to β-tricalcium phosphate were synthesized and Ca-P nanoparticle filled poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) microspheres were fabricated. The pH of the chemical reaction for Ca-P particle synthesis was found to have significant effects on the morphology and chemical composition of Ca-P precipitated. Ca-P particles produced at the pH of 10.0-11.0 were amorphous, had a Ca:P molar ratio of about 1.5, were spherical in shape and had sizes in the range of 10-30 nm. The Ca-P particles were used to form Ca-P nanocomposite microspheres through a solid-in-oil-in-water (S/O/W) emulsion solvent evaporation process. Ca-P nanoparticles were mostly encapsulated inside the microspheres and some Ca-P nanoparticles were superficially embedded on the microspheres. The Ca-P/PHBV microspheres had an average diameter of about 48 μm which is suitable for selective laser sintering for constructing osteoconductive composite scaffolds.     

Physical and chemical properties of Co n?m Cu m nanoclusters with n?=?2–6 atoms via ab-initio calculations

The aim of this work is to investigate the influence of the preparation method on the surface charge and electrokinetic properties of poly-??-caprolactone-based particles using poloxamer 188 as stabilizing agent. To target such objective, two processes (the nanoprecipitation and the emulsification-diffusion) are used to prepare well-defined nanospheres ranging in hydrodynamic diameters from 100 to 200?nm. The effect of the materials used on the particle zeta potential is systematically studied to compare the two preparation methods. The polarity of the organic solvent directly affects the zeta potential of particles prepared via the emulsification-diffusion method. The results obtained suggest that the aqueous phase used for preparing particles affects the possible re-arrangement of polymers during the emulsification step. As the aqueous phase is saturated with the organic solvent, the polar and the non-polar moieties of the polymer chains might be re-conformed following organic solvent diffusion from the particle core to the continuous phase. Regarding the nanoprecipitation process, the electrokinetic properties of the particles were found to be organic solvent independent, but principally affected by the pH and the salinity of the aqueous phase used during the particle preparation.     

Dynamic Light Scattering Measurement of Nanometer Particles in Liquids

Dynamic light scattering (DLS) techniques for studying sizes and shapes of nanoparticles in liquids are reviewed. In photon correlation spectroscopy (PCS), the time fluctuations in the intensity of light scattered by the particle dispersion are monitored. For dilute dispersions of spherical nanoparticles, the decay rate of the time autocorrelation function of these intensity fluctuations is used to directly measure the particle translational diffusion coefficient, which is in turn related to the particle hydrodynamic radius. For a spherical particle, the hydrodynamic radius is essentially the same as the geometric particle radius (including any possible solvation layers). PCS is one of the most commonly used methods for measuring radii of submicron size particles in liquid dispersions. Depolarized Fabry-Perot interferometry (FPI) is a less common dynamic light scattering technique that is applicable to optically anisotropic nanoparticles. In FPI the frequency broadening of laser light scattered by the particles is analyzed. This broadening is proportional to the particle rotational diffusion coefficient, which is in turn related to the particle dimensions. The translational diffusion coefficient measured by PCS and the rotational diffusion coefficient measured by depolarized FPI may be combined to obtain the dimensions of non-spherical particles. DLS studies of liquid dispersions of nanometer-sized oligonucleotides in a water-based buffer are used as examples.     

Optimization of Preparation Techniques for Poly(Lactic Acid-Co-Glycolic Acid) Nanoparticles

Microparticles and nanoparticles of poly(lactic acid-co-glycolic acid) (PLAGA) are excellent candidates for the controlled release of many pharmaceutical compounds because of their biodegradable nature. The preparation of submicron PLAGA particles poses serious challenges that are not necessarily present when preparing microparticles. We have evaluated several combinations of organic solvents and surfactants used in the formulation of PLAGA nanoparticles. Critical factors such as the ability to separate the nanoparticles from the surfactant, the ability to re-suspend the nanoparticles after freeze-drying, formulation yield and nanoparticle size were studied. The smallest particles were obtained using the surfactant/solvent combination of sodium dodecyl sulfate and ethyl acetate (65 nm) and the largest particles were obtained using poly(vinyl alcohol) and dichloromethane (466 nm). However, the optimal nanoparticles were produced using either acetone or ethyl acetate as the organic solvent and poly(vinyl alcohol) or human serum albumin as the surfactant. This is because the most critical measure of performance of these nanoparticles proved to be their ability to re-suspend after freeze-drying.     

Polymer-Nanoparticle Composites Composed of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and Coated Silver Nanoparticles

The effects of addition of synthesized organic-suspension silver nanoparticles on the crystallization and thermal stability of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) were studied by transmission electron microscopy (TEM), differential scanning calorimetry (DSC), wide-angle X-ray diffraction (XRD), UV-Vis absorption spectroscopy, polarized optical microscopy (POM), and thermal gravimetric analysis (TGA). The TEM images showed the average primary size of the as-synthesized silver nanoparticles, coated with a monolayer of the surfactants consisting of oleic acid and an alkylamine, was about 5 nm with narrow distribution, and that they were uniformly dispersed in n-heptane. PHBV/silver nanocomposites were prepared by melt mixing in an internal mixer and then injection molded into rectangle-shaped specimens by a labscale injection molding device. The coated silver nanoparticles showed a homogenuous dispersion in the PHBV matrix when the content of coated silver nanoparticles was about 1%. Both the DSC and POM data showed the efficient heterogeneous nucleation by the coated silver nanoparticles for facilitating PHBV crystallization. The thermal stability of the PHBV/silver nanocomposites improved with the increase in the content of the coated silver nanoparticles.     

Phase separation in dilute solutions of poly (N-isopropylacrylamide)

The appearance of spherical particles resulting from phase separation in dilute solutions of poly(N-isopropylacrylamide) has been observed by dynamic light scattering (DLS). The particles have a relatively narrow size distribution. The size of particles increases with increasing concentration of polymer, and decreasing heating speed. Electron microscopy confirms the existence of spherical particles with size and polydispersity in agreement with DLS.     

电爆炸丝法制备纳米ZrO2粉末的实验研究

设计并搭建了基于高压放电方式的金属丝电爆炸制备纳米粉体的实验装置,并配备了电流电压测量辅助系统,可以方便地制备纳米颗粒,实时记录电爆炸过程中的电流和电压。对Zr丝进行电爆炸实验;理论上分析了Zr丝在电爆炸过程中的沉积能量以及物态的变化过程。研究了充电电压对沉积能量和纳米粉体特性的影响规律。通过元素能谱(EDS)和X射线衍射仪(XRD)对制备的纳米粉体做了成分分析。采用透射电子显微镜(TEM)观察纳米粉体的形貌和结构,并用电镜统计观察法得到纳米粉体的粒度分布。研究结果表明:电压的增大,会使沉积能量增加,并缩短锆丝完全汽化所需时间。增大充电电压可显著缩小纳米粉体的粒径分布范围,并得到更小平均粒径的颗粒。电爆炸锆丝的产物是ZrO₂纳米颗粒,其晶相结构为单斜晶系(m-ZrO₂)和立方晶系(c-ZrO₂),并且颗粒呈良好的球形,表面光滑,轮廓清晰,粒径分布主要集中在10 nm到40 nm之间。     

Preparation and Size Characterization of Silver Nanoparticles Produced by Femtosecond Laser Ablation in Water

Femtosecond laser ablation of silver plate placed in water is used to produce nanoparticle suspension. The method is easy to operate and the suspension is relatively stable. The optical properties and the size distribution of the suspension are studied with UV-vis absorption spectroscopy and dynamic light scattering, respectively. The shape of the nanoparticles is investigated by an atomic force microscope, which is near spherical. There are two kinds of nanoparticles, small particles with diameter about 35 nm, and large particles with diameter about 120 nm.     

Analytical characterization of gold nanoparticle primary particles,aggregates, agglomerates,and agglomerated aggregates

Gold nanoparticles have been studied for many biomedical applications. However, alterations in the gold nanoparticles’ environment frequently lead to the formation of aggregates and agglomerates, which have not been well characterized. These new structures could significantly change the biological impact of the nanoparticles, so the appropriate characterization of these structures prior to biological administration is vital for the correct interpretation of toxicology results. By varying the solvent or heating under pressure, four reproducible gold nanoparticles structures were created: 10 nm primary particles, aggregates of the primary particles that contain non-reversible bonds between the individual nanoparticles, agglomerates of primary particles that contain reversible interactions between the individual nanoparticles, and agglomerated aggregates that have reversible bonds linking individual aggregates. Ultraviolet–visible (UV–Vis) spectroscopy, thermal gravitational analysis, and neutron activation analysis were each found to accurately measure the concentration of the primary particles. The primary particles measured 10 nm by dynamic light scattering (DLS) and had a spherical morphology by transmission electron microscopy (TEM) while the aggregates measured 110 nm by DLS and had a distorted morphology by TEM. The agglomerate and aggregated agglomerate samples both measured >1,000 nm by DLS, but the individual particles had significantly different morphologies by TEM. Multiple other analytical techniques, including ultracentrifugation, gel electrophoresis, and X-ray diffraction, also showed unique traits for each structure. The structural differences did not change in the presence of cell culture media or rat serum. In addition, the primary particles, aggregates, and agglomerates each had a unique UV–Vis spectrum, allowing for an inexpensive, rapid method to differentiate between the structures.     

Process variables in biomimetic synthesis of silver nanoparticles by aqueous extract of Azadirachta indica (Neem) leaves

Owing to widespread applications, synthesis and characterization of silver nanoparticles is recently attracting considerable attention. Increasing environmental concerns over chemical synthesis routes have resulted in attempts to develop biomimetic approaches. One of them is synthesis using plant parts, which eliminates the elaborate process of maintaining the microbial culture and often found to be kinetically favourable than other bioprocesses. The present study deals with investigating the effect of process variables like reductant concentrations, reaction pH, mixing ratio of the reactants and interaction time on the morphology and size of silver nanoparticles synthesized using aqueous extract of Azadirachta indica (Neem) leaves. The formation of crystalline silver nanoparticles was confirmed using X-ray diffraction analysis. By means of UV spectroscopy, Scanning and Transmission Electron Microscopy techniques, it was observed that the morphology and size of the nanoparticles were strongly dependent on the process parameters. Within 4 h interaction period, nanoparticles below 20-nm-size with nearly spherical shape were produced. On increasing interaction time (ageing) to 66 days, both aggregation and shape anisotropy (ellipsoidal, polyhedral and capsular) of the particles increased. In alkaline pH range, the stability of cluster distribution increased with a declined tendency for aggregation of the particles. It can be inferred from the study that fine tuning the bioprocess parameters will enhance possibilities of desired nano-product tailor made for particular applications.     

A simple method for the preparation of colloidal polymer-supported silver nanoparticles

Polysulfone?silver composite nanoparticles have been prepared by combining polymer nanoprecipitation and redox synthesis of silver, in the presence of a glucose-modified cyclosiloxane as stabilizing agent. Based on previous kinetic investigations and on model reactions, we concluded that the reducing agent in this case is the tetrahydrofuran (THF) used as solvent for polysulfone. Dynamic light scattering measurements on the obtained polymer-silver composite particles indicated particle average diameter of 176 nm with a polydispersity index of 0.25. The UV–vis spectrum exhibited the silver plasmon resonance. By different microscopic methods (atomic force microscopy—AFM, high resolution transmission electron microscopy—HRTEM, and scanning electron microscopy—SEM), larger polymer particles coated with silver nanoprticles were observed. The Energy Dispersive X-Ray analysis—EDX; confirmed the presence of Ag on the surface of the particles, while the selected area electron diffraction showed single crystalline silver nanospheres with face-centered cubic structure.     

An investigation of the surface-enhanced Raman scattering (SERS) effect from laser irradiation of Ag nanoparticles prepared by trisodium citrate reduction method

By irradiating a Ag colloid solution, produced by trisodium citrate reduction method, employing the active Quanta Ray Nd:YAG laser system, λ = 1064 nm, we prepared relatively small, spherical Ag nanoparticles with a narrow size distribution. The irradiated particles not only improve the configuration, but also the spectroscopy properties to some extent. The influence of the laser fluence on the irradiated energy was studied, via transmission electron micrograph (TEM) images, surface plasmon absorption (SPA) spectra, and surface-enhanced Raman scattering (SERS) spectra. Those benefit to understanding the spectroscopy properties of irradiated particles to obtain precise understanding of the mechanism. And probably the reasonable explanations are given.     

Multimethod 3D characterization of natural plate-like nanoparticles: shape effects on equivalent size measurements

The fundamental properties and processes that govern nanoparticle behavior in colloidal dispersions are critical to predict their performance in applications and also their environmental and health implications. Illite is a platy clay mineral that is present in large amounts in aquatic environments and can be used as a model natural particle for environmental risk assessment. However, the high-aspect ratio of illite makes conventional analysis, usually assuming a spherical size, insufficient for the assessment of shape-dependent properties. In the current paper, a multimethod characterization of a suspension of illite particles was done using atomic force microscopy, scanning electron microscopy, dynamic light scattering (DLS), nanoparticle tracking analysis, differential centrifugal sedimentation, and centrifugal-field flow fractionation coupled to multiangle light scattering and DLS. The relation between the different measurands was investigated, and the effect of the shape on the equivalent particle size was reported. While some of the used techniques are capable of assessing the aspect ratio of illite, the results confirm the need for multiple techniques and analysis of different types of measurands especially for high-aspect-ratio particles.     

Electrochemical method for the synthesis of silver nanoparticles

The article deals with a novel electrochemical method of preparing long-lived silver nanoparticles suspended in aqueous solution as well as silver powders. The method does not involve the use of any chemical stabilising agents. The morphology of the silver nanoparticles obtained was studied using transmission electron microscopy, scanning electron microscopy, atomic force microscopy and dynamic light scattering measurements. Silver nanoparticles suspended in water solution that were produced by the present technique are nearly spherical and their size distribution lies in the range of 2 to 20 nm, the average size being about 7 nm. Silver nanoparticles synthesised by the proposed method were sufficiently stable for more than 7 years even under ambient conditions. Silver crystal growth on the surface of the cathode in the electrochemical process used was shown to result in micron-sized structures consisting of agglomerated silver nanoparticles with the sizes below 40 nm.     

Sonochemical synthesis of amorphous nanoscopic iron(III) oxide from Fe(acac)3

Amorphous nanoscopic iron(III) oxide with interesting magnetic properties was prepared by sonolysis of Fe(acac)(3) under Ar in tetraglyme with a small amount of added water. The organics content and the surface area of the Fe(2)O(3) nanoparticles can be controlled with an amount of water in the reaction mixture and it increases from 48 m(2)g(-1) for dry solvent up to 260 m(2)g(-1) when wet Ar is employed. For further monitoring of the particle size and morphology and for the study of the surface, magnetic and thermal properties, the sample with 2 vol.% of H(2)O was chosen. SEM showed nanoscopic composite particles of a uniform size distribution and nearly spherical shapes with an estimated diameter of 20 nm. Such composites are built from amorphous iron(III) oxide nanoparticles (3 nm) embedded in an acetate matrix as proved by TEM and IR spectroscopy. Temperature-dependent M?ssbauer spectra demonstrate a very narrow magnetic transition with an unusually low transition temperature around 25K reflecting the system of magnetically non-interacting ultrasmall particles with a narrow size distribution. The in-field (5T) M?ssbauer spectrum recorded at 5K shows a minimum change compared to the zero-field spectrum indicating an absence of the long-range magnetic ordering. The composite particles are thermally stable up to 150 degrees C, which is confirmed by DSC, TG, and by the constant surface area. At higher temperatures, acetate groups are removed from the particle surface, which is documented by the increased surface area and disappearance of their IR bands.     

Nucleation of Polypropylene Crystallization with Gold Nanoparticles. Part 2: Relation between Particle Morphology and Nucleation Activity

The influence of gold nanoparticle morphology on nucleation of isotactic polypropylene (PP) crystallization was investigated. Previous experiments indicated certain nucleation activity of gold nanoparticles, varying with their size. In this work, eight types of gold micro/nanoparticles were used: vacuum-sputtered nanostructures (nanoparticles, nanoislands, and nanolayers), chemically prepared isometric gold nanocrystals (5, 20, and 100 nm diameters), and two types of gold microcrystals with well-developed crystal facets [with (100) and (111) facets, respectively]. To minimize the effect of particle agglomeration, we used our recently introduced sandwich method, in which the nucleating agent was deposited between thin PP films and the nucleation was evaluated by polarized light microscopy (PLM), X-ray scattering (WAXS), and differential scanning calorimetry (DSC). The nucleation activity of Au particles in PP was lower than it might be expected from the previous studies and depended on their morphology. The nucleation activity of Au microcrystals with well-developed facets was higher than the activity of non-faceted Au nanocrystals.     

Local fields close to the surface of nanoparticles and aggregates of nanoparticles

A refined discussion of the near-field scattering of spherical nanoparticles and the electromagnetic fields close to the particle surface is given. New results for the dependence on the distance from the surface and the angular distribution of the scattered light in the near-field are given. It will be shown that the radial component of the electric field leads to striking differences in the phase functions in the near-field and the far-field. Exemplary computations are presented for Ag and Au particles with different size. In a second part the discussion is extended to assemblies of spherical Ag and Au nanoparticles. It will be shown that large near-fields at wavelengths commonly used in SERS experiments are obtained for aggregates. In the near-field scattering intensity “hot spots” mark regions between particles in the aggregate where the near-field is particularly high. Received: 4 May 2001 / Revised version: 20 July 2001 / Published online: 19 September 2001     

Preparation and electrophoretic response of poly(methyl methacrylate-co-methacrylic acid) coated TiO2 nanoparticles for electronic paper application

Titanium dioxide (TiO₂) nanoparticles were encapsulated with poly(methyl methacrylate-co-methacrylic acid) (PMMA-co-MAA) via simple method of coacervation, in order to improve the dispersion stability of the nanoparticles in a dielectric medium and to reduce the density mismatch between TiO₂ and a dielectric medium for a electrophoretic display application. The morphology of PMMA-co-MAA coated TiO₂ nanoparticles were observed via SEM and electrophoretic light scattering (ELS). It was found that density of PMMA coated TiO₂ nanoparticles were reduced by coating process via gas pycnometer. Electrophoretic mobility of the fabricated nanoparticles in a low dielectric medium with charge control agent was measured via electrophoretic light scattering spectrophotometer for potential application in electronic paper technology.     

Spontaneous formation of polymer nanoparticles by good-solvent evaporation as a nonequilibrium process

In recent years, polymer nanoparticles have been investigated with great interest due to their potential applications in the fields of electronics, photonics, and biotechnology. Here, we report the spontaneous formation of polymer nanoparticles from a clear solution containing a nonvolatile poor solvent by slow evaporation of a volatile good solvent. During evaporation of the good solvent, the solution gradually turns turbid. After evaporation, polymer nanoparticles of homogeneous shape and size are dispersed in the poor solvent. Homogeneous nucleation and successive growth of polymer particles takes place during the dynamic nonequilibrium process of solvent evaporation. The size of the particles, ranging from tens of nanometers to micrometer scale, depends on both polymer concentration and the solvent mixing ratio. Because of the physical generality of the particle formation mechanism, this procedure is applicable to a wide variety of polymers with suitable combinations of solvents. Here, we also show unique features, surface structures and surface properties of polymer nanoparticles prepared by this method.