Nanosized TiO<Subscript>2</Subscript> particles decorated on SiO<Subscript>2</Subscript> spheres (TiO<Subscript>2</Subscript>/SiO<Subscript>2</Subscript>): synthesis and photocatalytic activities

Nanosized TiO₂ and nano-anatase TiO₂ decorated on SiO₂ spherical core shells were synthesized by using a sol–gel method. The synthesized pure TiO₂ nano particle and TiO₂ grafted on SiO₂ sphere with various ratios have been characterized for their structure and morphologies by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectrophotometry (FTIR) and transmission electron microscopy (TEM). Their surface areas were measured using the BET method. The photocatalytic activity of all nanocomposites was investigated using methylene blue as a model pollutant. The synthesized TiO₂/SiO₂ particles appeared to be more efficient in the degradation of methylene blue pollutant, as compared to pure TiO₂ particles.     

Core shell‐structured NiFe2O4@TiO2 nanoparticle‐anchored reduced graphene oxide for rapid degradation of rhodamine B

In this work, the NiFe₂O₄@TiO₂/reduced graphene oxide (RGO) ternary nanocomposites with high saturation magnetization and catalytic efficiency have been synthesized through the following steps. First, graphene oxide was prepared using the modified Hummer's method. Second, the NiFe₂O₄ nanoparticles were successfully prepared using the hydrothermal method. Third, the core shell‐structured NiFe₂O₄@TiO₂/RGO nanocomposite precursors were easily obtained through hydrolysis reaction. The morphology of NiFe₂O₄@TiO₂/RGO nanocomposites was characterized from scanning electron microscope (SEM) and transmission electron microscope (TEM) images. Moreover, the results of X‐ray diffraction (XRD) patterns proved that the TiO₂ coating shell consisted of anatase. The vibrating sample magnetometer (VSM) measurements showed that the saturation magnetization value of NiFe₂O₄@TiO₂/RGO ternary nanocomposites was 25 emu/g. The X‐ray photoelectron spectroscopy (XPS) analysis confirmed that only part of the graphite oxide (GO) was reduced to RGO in the ternary nanocomposite. The degradation experiments proved that NiFe₂O₄@TiO₂/RGO nanocomposite exhibited the high catalytic efficiency and outstanding recyclable performance for rhodamine B (RhB).     

Synthesis of Bi<Subscript>2</Subscript>O<Subscript>4</Subscript>@TiO<Subscript>2</Subscript> Heterojunction with Enhanced Visible Light Photocatalytic Activity

A novel Bi₂O₄@TiO₂ heterojunction was constructed by a simple two-step method. The charges migration between Bi₂O₄ and TiO₂ via the heterojunction improves the electron/hole separation efficiency. Furthermore, Bi₂O₄@TiO₂ heterostructures exhibit better adsorption capability for methyl orange molecular due to their higher specific surface area than pure Bi₂O₄. As a result, Bi₂O₄@TiO₂ hybrids show an improved visible light photocatalytic activity and photostability for the degradation of methyl orange.     

Photocatalysis enhancement of CaAl<Subscript>2</Subscript>O<Subscript>4</Subscript>:Eu<Superscript>2+</Superscript>, Nd<Superscript>3+</Superscript>@TiO<Subscript>2</Subscript> composite powders

CaAl₂O₄:Eu²⁺, Nd³⁺@TiO₂ composite powders were synthesized by a sol–gel method under mild conditions (i.e. low temperature and ambient pressure). The as-prepared powders were characterized by transmission electron microscopy (TEM) and analyzed by X-ray diffraction (XRD). The photocatalytic behavior of the TiO₂-base surfaces was evaluated by the degradation of nitrogen monoxide gas. It suggested that CaAl₂O₄:Eu²⁺, Nd³⁺@TiO₂ composite powders were composed of anatase titania and that CaAl₂O₄:Eu²⁺, Nd³⁺. TiO₂ particles were deposited on the surface of CaAl₂O₄:Eu²⁺, Nd³⁺ to form uniform film. CaAl₂O₄:Eu²⁺, Nd³⁺@TiO₂ composite powders exhibited higher photocatalytic activity compared with pure TiO₂ under visible light. And the result also clearly indicated that the long afterglow phosphor absorbed and stored lights for the TiO₂ to remain photocatalytic activity in the dark.     

Fabrication and characterization of Fe_3O_4@SiO_2@TiO_2@Ho nanostructures as a novel and highly efficient photocatalyst for degradation of organic pollution

In this work we synthesize a novel and highly efficient photocatalyst for degradation of methyl orange and rhodamine B. In addition, a new method for synthesis of Fe_3O_4@SiO_2@TiO_2@Ho magnetic core-shell nanoparticles with spherical morphology is proposed. The crystal structures, morphology and chemical properties of the as-synthesized nanoparticles were characterized using Fourier transform infrared spectroscopy(FT-IR), scanning electron microscopy(SEM), transmission electron microscopy(TEM), energy dispersive X-ray(EDS), X-ray diffraction(XRD), UV–vis diffuse reflectance spectroscopy(DRS) and vibrating sample magnetometer(VSM) techniques. The photocatalytic activity of Fe_3O_4@SiO_2@TiO_2@Ho was investigated by degradation of methyl orange(MO) as cationic dye and rhodamine B(Rh B) as anionic dye in aqueous solution under UV/vis irradiation. The results indicate that about 92.1% of Rh B and78.4% of MO were degraded after 120 and 150 min, respectively. These degradation results show that Fe_3O_4@SiO_2@TiO_2@Ho nanoparticles are better photocatalyst than Fe3O4@Si O2@TiO 2@Ho for degradation of MO and Rh B. As well as, the catalyst shows high recovery and stability even after several separation cycles.     

Microstructure of SiO<Subscript>2</Subscript>/TiO<Subscript>2</Subscript> hybrid electrospun nanofibers and their application in dye degradation

SiO₂/TiO₂ hybrid nanofibers were prepared by electrospinning and applied for photocatalytic degradation of methylene blue (MB). The phase structure, specific surface area, and surface morphologies of the SiO₂/TiO₂ hybrid nanofibers were characterized through thermogravimetry (TG), X-ray diffraction (XRD) analysis, Brunauer–Emmett–Teller (BET) analysis, scanning electron microscopy (SEM), etc. XRD measurements indicated that doping of silica into TiO₂ nanofibers can delay the phase transition from anatase to rutile and decrease the grain size. SEM and BET characterization proved that silica doping can remarkably enhance the porosity of the SiO₂/TiO₂ hybrid nanofibers. The MB adsorption capacity and photocatalytic activity of the SiO₂/TiO₂ hybrid nanofibers were distinguished experimentally. It was found that, although increased silica doping content could enhance the MB adsorption capacity, the intrinsic photocatalytic activity gradually dropped. The SiO₂ (10 %)/TiO₂ composite nanofibers exhibited the highest MB degradation rate, being superior to SiO₂ (20 %)/TiO₂ or pure TiO₂.     

TiO<Subscript>2</Subscript>/SiO<Subscript>2</Subscript> hybrid nanomaterials: synthesis and variable UV-blocking properties

Silica and core–shell structured titania/silica (TiO₂/SiO₂) nanoparticles with particles size ranging from tens to hundreds of nanometers were prepared and deposited onto cotton fabric substrates by sol–gel process. The morphologies of the nanoparticles were characterized by field-emission scanning electron microscope (FE-SEM). The photocatalytic decomposition properties as well as UV-blocking properties of the fabrics treated with SiO₂ and TiO₂/SiO₂ nanoparticles were investigated.     

Fabrication,characterization, and photocatalytic performance of TiO<Subscript>2</Subscript> hybridized with SiO<Subscript>2</Subscript>

Nanostructures TiO₂–SiO₂ photocatalysts were successfully synthesized using the sol-gel method, hydro-calcination, co-precipitation and room-temperature solid-phase synthesis technology. X-ray powder diffraction pattern (XRD), Fourier transform infrared spectrum (FTIR), photoluminescence (PL) spectra, thermal analyses (TG–DTA), scanning electron micrographs (SEM), X-ray photoelectron spectroscopy (XPS), and UV-Vis diffuse reflectance spectroscopy (UV-Vis DRS) were used to characterize the as-synthesized catalysts. Photocatalytic performances of the catalysts were evaluated by the degradation of methyl orange (MO) under s imulated natural light and the degradation rate of MO is 97.2%. The composites showed a good stability: after five recycling runs there are no significant decreases in the photocatalytic activity. The photodegradation of methylene blue, rhodamine B, methyl violet, naphthol green B, basic fuchsin, malachite green, and methyl red were also tested, and the degradation rate of dyes could reach over 94.2 %. A possible mechanism for the photocatalysis with the TiO₂–SiO₂ was proposed.     

Flower-like Au/Ag/TiO<Subscript>2</Subscript> nanocomposites with enhanced photocatalytic efficiency under visible light irradiation

Uniform flower-like TiO₂ coated Au nanostars and core-shell Au@Ag nanostars with different amounts of Ag coating were prepared through a facile method by hydrolysis of TiF₄ under an acidic environment. The photocatalytic capability of these flower-like nanocomposites under visible light irradiation was found to be enhanced by up to 4.7-fold compared to commercial P25 TiO₂ nanoparticles. The enhanced photocatalytic activity was ascribed to improved light absorption and hot electron injection from the photo-excited Au@Ag core to the TiO₂ shell.     

Visible-light-driven photocatalysis of heterostructure Ag/Bi<Subscript>2</Subscript>WO<Subscript>6</Subscript> nanocomposites and their photocatalytic degradation of dye under visible light irradiation

Ag/Bi₂WO₆ nanocomposites were successfully synthesized by a combination of hydrothermal method and ultrasonic vibration. The phases, vibration modes, constituents and morphologies were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, field emission scanning electron microscopy, transmission electron microscopy and X-ray photoelectron spectroscopy. The visible-light-driven photocatalytic activitiy of 0–10 wt% Ag/Bi₂WO₆ samples was studied by determining the photodegradation of rhodamine B under xenon lamp. In this research, 10 wt% Ag/Bi₂WO₆ nanocomposites exhibit the highest efficiency and have the promising photocatalytic properties for waste water treatment.     

Synthesis of monodisperse pancake-like Bi<Subscript>2</Subscript>WO<Subscript>6</Subscript> with prominent photocatalytic performances

Uniform Bi₂WO₆ pancakes were prepared via a solvothermal route in a solvent mixture of glycerol (Gly) and water (V/V = 1). A variety of techniques including scanning electron microscopy, transmission electron micrographs, X-ray powder diffraction, Brunauer–Emmett–Teller, FT-IR spectra, and UV–Vis diffuse reflectance spectra, were employed to characterize the structure and properties of the as-obtained Bi₂WO₆. It was found that Bi₂WO₆ pancakes showed prominent photocatalytic performance for the degradation of rhodamine B (RhB) under visible light (λ ≥ 420 nm) irradiation, which can be attributed to its good crystallization, large surface area, unique morphology and structural features.     

Facile synthesis of core-shell ZnO/Cu<Subscript>2</Subscript>O heterojunction with enhanced visible light-driven photocatalytic performance

As p–n heterojunction photocatalysts usually possess dramatically improved photocatalytic activity than single photocatalysts, a novel ZnO/Cu₂O heterojunction was designed by a facile self-templating method in this study. The crystal structure, chemical composition, surface morphology, and optical property of ZnO/Cu₂O heterojunction were investigated to clarify the structure-property correlation. Scanning electron microscope and transmission electron microscope images proved the uniform core-shell submicrospheres of ZnO/Cu₂O, in which a three-dimensional flower-like ZnO core was coated by a shell comprised of Cu₂O nanoparticles. The photoresponse result showed that the band gap of the ZnO/Cu₂O core-shell submicrospheres became narrow, and the absorption edge shifted from the ultraviolet region (380?nm) to the visible region (500?nm) compared with the pure ZnO microflowers. For the degradation of Rhodamine B under visible light, the photocatalytic efficiency of ZnO/Cu₂O submicrospheres reached 96% within 40?min of reaction time, which was 3.8 times higher than that of pure ZnO microflowers and up to 4.5 times than that for pure Cu₂O nanoparticles. The remarkable visible light-driven photocatalytic performance is mainly attributed to the extended photoresponse range and effective separation of the photo-generated electron-hole pairs in the unique heterojunction.

Open image in new window

ZnO/Cu₂O core-shell microspheres for the degradation of RhB under visible light

     

Ag<Subscript>3</Subscript>PO<Subscript>4</Subscript>/Bi<Subscript>2</Subscript>MoO<Subscript>6</Subscript> heterostructures with enhanced visible light photocatalytic activity for the degradation of rhodamine B

Highly efficient visible-light-driven Ag₃PO₄/Bi₂MoO₆ hybrid photocatalysts with different mole ratios of Ag₃PO₄ were prepared via sonochemical method and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results show that product are cubic Ag₃PO₄ nanoparticles supported on orthorhombic Bi₂MoO₆ nanoplates. Under visible light irradiation (>420 nm), the Ag₃PO₄/Bi₂MoO₆ photocatalysts displayed the higher photocatalytic activity than pure Bi₂MoO₆ for the decolorization of rhodamine B (RhB). Among the hybrid photocatalysts, 10% Ag₃PO₄/Bi₂MoO₆ exhibited the highest photocatalytic activity for the decolorization of RhB due to the efficient separation of electron–hole pairs.     

One-pot sequential synthesis of magnetically separable Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/AgCl photocatalysts with enhanced activity and stability

Magnetically separable Fe₃O₄/AgCl photocatalysts were prepared by a one-pot sequential method. A series of techniques proved the hybrid structure of Fe₃O₄/AgCl composites. Fe₃O₄/AgCl composites had a much higher photocatalytic activity toward Rhodamine B (RhB) degradation than pure AgCl under the simulated solar light irradiation. The existence of metal Ag resulted in high photocatalytic activity of Fe₃O₄/AgCl, which was related with the amount of metallic Ag. The scavenging experiments showed that the degradation reaction most probably was initiated by the photoinduced single-electron transfer, and the generation of superoxide anion (O ₂ ^-· ) played a significant role. The composite photocatalysts could be recycled by applying an external magnetic field, and the reused composites maintained their original photocatalytic activity. Fe₃O₄/AgCl composites were highly efficient, magnetically separable, and recoverable. This proves their potential applications in the photodegradation of organic pollutants.     

Obtaining of Ni<Subscript>0.65</Subscript>Zn<Subscript>0.35</Subscript>Fe<Subscript>2</Subscript>O<Subscript>4</Subscript>/SiO<Subscript>2</Subscript> nanocomposites by thermal decomposition of complex compounds embedded in silica matrix

This article presents the results of our investigation on the obtaining of Ni_0.65Zn_0.35Fe₂O₄ ferrite nanoparticles embedded in a SiO₂ matrix using a modified sol–gel synthesis method, starting from tetraethylorthosilicate (TEOS), metal (Fe^III,Ni^II,Zn^II) nitrates and ethylene glycol (EG). This method consists in the formation of carboxylate type complexes, inside the silica matrix, used as forerunners for the ferrite/silica nanocomposites. We prepared gels with different compositions, in order to obtain, through a suitable thermal treatment, the nanocomposites (Ni_0.65Zn_0.35Fe₂O₄)_x–(SiO₂)_100–x (where x=10, 20, 30, 40, 50, 60 mass%). The synthesized gels were studied by differential thermal analysis (DTA), thermogravimetry (TG) and FTIR spectroscopy. The formation of Ni–Zn ferrite in the silica matrix and the behavior in an external magnetic field were studied by X-ray diffraction (XRD) and quasi-static magnetic measurements (50 Hz).     

CoFe2O4@TiO2@Au Core-Shell Structured Microspheres: Synthesis and Photocatalyltic Properties

A facile and efficient method for fabrication of magnetic composite microspheres CoFe₂O₄@TiO₂@Au is demonstrated. The shells of anatase TiO₂ were coated onto a magnetic CoFe₂O₄ core via liquid-phase deposition procedure, and then Au nanoparticles were deposited onto CoFe₂O₄@TiO₂ microspheres through seed-mediated growth. XRD, TEM, and VSM were used to investigate the structure, morphology and magnetic properties of the samples, their photocatalytic activity were also tested. Heterostructure of CoFe₂O₄@TiO₂@Au was confirmed by different measurements. Compared to unmodified CoFe₂O₄@TiO₂ microspheres, CoFe₂O₄@TiO₂@Au microspheres showed higher photocatalytic activity for Rhodamine B (RhB) degradation in water.

     

Investigation of thermally stimulated charge relaxation mechanism in SiO<Subscript>2</Subscript> filled polycarbonate nanocomposites

The thermally stimulated charge relaxation properties of polycarbonate (PC) filled with SiO₂ nanofiller were studied by means of thermally stimulated discharge current (TSDC). The nanocomposite samples were further characterized by UV–vis spectroscopy, scanning electron microscopy, energy dispersive X-ray spectra, and differential scanning calorimetry (DSC) techniques to investigate the dispersion of nanofillers in polymer matrix and glass transition temperature. All pristine and nanocomposites samples of thickness about 25 μm were prepared using solution mixing method. The suitable weight percentage of SiO₂ nanofillers has been chosen to prevent the nonuniform dispersion. TSDC measurement of PC (Pristine) and PC+ (7% SiO₂) shows the single peak, while TSDC characteristic of other nanocomposites are showing two peaks. The higher temperature TSDC peak of pristine and nanocomposites samples is originated due to the charge relaxation from shallower and deeper trapping sites, however, low temperature peak is caused by dipolar relaxation of charge carriers. Since the position of higher temperature TSDC peak is generally an analysis of glass transition temperature of polymer/polymer nanocomposites. The authors have observed that the temperature of this peak is almost same as the T _g measured by DSC with 0 to ±5% variation. This article presents the deeper understanding of charge relaxation mechanism caused by SiO₂ nanofillers in polycarbonate.     

Hydrothermal synthesis of graphene-ZnTiO<Subscript>3</Subscript> nanocomposites with enhanced photocatalytic activities

Pure phase ZnTiO₃ was prepared through a sol–gel process, then graphene-ZnTiO₃ nanocomposites were synthesized by a hydrothermal method using the prepared ZnTiO₃ nanoparticles and graphene oxide as precursors. X-ray diffraction results revealed the production of pure cubic ZnTiO₃ at 600 °C. ZnTiO₃ was anchored on the graphene nanosheets, demonstrating a spherical morphology in transmission electron microscope images. The existence of chemical bond Ti–O–C in the nanocomposites was proved by Fourier-transforming infrared spectroscopy. UV–Vis diffusive reflection spectra indicated that the absorption edge of the nanocomposites shifted towards the visible region. The photocatalytic activity of the composites was tested through the photocatalytic degradation of methyl blue under simulated solar irradiation. The results showed that the photocatalytic activity of the nanocomposites was obviously increased in contrast to pure ZnTiO₃, which was strongly affected by the crystalline structure of ZnTiO₃ and the concentration of graphene. The enhanced photocatalytic activity was mainly attributed to the conglomeration inhibition of ZnTiO₃ nanoparticles, the electron transfer between ZnTiO₃ and graphene and the extended absorption range. Furthermore, other contaminants such as tetracycline, Rhodamine B and methyl orange were tested under the same conditions to investigate the photocatalytic performance of the photocatalysts. The reusability tests indicated that the prepared composites exhibited good stability.     

Effect of PEG with different <Emphasis Type="Italic">M</Emphasis><Subscript>W</Subscript> as template direction reagent on preparation of porous TiO<Subscript>2</Subscript>/SiO<Subscript>2</Subscript> with assistance of supercritical CO<Subscript>2</Subscript>

Titania–silica composite have been prepared using polyethylene glycol (PEG) with different molecular weights (M _w), PEG20000, PEG10000, and PEG2000, as template in supercritical carbon dioxide (SC CO₂). The composite precursors were dissolved in SC CO₂ and impregnated into PEG templates using SC CO₂ as swelling agent and carrier. After removing the template by calcination at suitable temperature, the titania–silica composite were obtained. The composite were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, and nitrogen sorption–desorption experiment. Photocatalytic activity of the samples has been investigated by photodegradation of methyl orange. Results indicate that there are many Si–O–Ti linkages in the TiO₂/SiO₂ composite; the PEG template has a significant influence on the structure of TiO₂/SiO₂. In addition, the TiO₂/SiO₂ prepared with PEG10000 exhibited high photocatalytic efficiency. So this work supplies a clue to control and obtain the TiO₂/SiO₂ composite with different photocatalytic reactivity with the aid of suitable PEG template in supercritical CO₂.     

PVA在提高TiO2/CdSe异质结光催化活性与抗光腐蚀性能方面的应用及机理

通过阳极氧化法和电化学沉积制备了TiO_2/CdSe异质结膜,并通过旋涂结合后续热处理的方法,在TiO_2/CdSe异质结膜上制备适量脱水态的聚乙烯醇(PVA)来提高TiO_2/CdSe异质结抗光腐蚀性能。采用XRD,SEM,FTIR,UV-Vis,PL,电化学测试,光催化降解罗丹明B等方法对样品的晶体结构、微观形貌、光电化学性能、光催化性能等进行了表征,并通过测定光降解体系中Cd2+的浓度,研究了纳米复合材料的抗光腐蚀性能。结果表明,与TiO_2/CdSe相比,TiO_2/CdSe/PVA纳米复合材料不仅具有更好的可见光光催化活性,还具有良好的可见光光催化稳定性和抗光腐蚀性能。同时,PVA的存在对光催化反应中的二次污染物Cd2+也有抑制作用。