Design and simulation of a wire scanner for the CSNS linac

In this paper,we report the design and simulation of a wire scanner for the linac of the CSNS(China Spallation Neutron Source).The wire scanner is used to measure the transverse beam profile andthe emittance.The effect of beam energy change upon the mechanical design of the wire scanner must beconsidered.The simulation results of heat on the two specified wires,tungsten and carbon,by using the finite element method software,ANSYS,are presented.In addition,the effect of wire deformation on the beam profile measurement is qualitatively analyzed,and the signal level of the wire scanner is discussed.     

Precise out-vacuum proton beam monitoring system based on vibrating wire

As an instrument for Korea Multi-purpose Accelerator Complex (KOMAC) facility proton beam profiling, a vibrating wire monitor (VWM) has been installed and tested at TR23 target room. Experiments were done at very low (100 nA) beam current conditions. At the number of particles about 10¹¹ proton/train and trains repetition rate of 0.1 Hz we have measured the beam profile by a few scanning steps. The experience accumulated in these experiments turned out to be useful for the VWM upgrades (e. g. understanding interactions of protons with wire materials and heat transfer processes) and will be particularly helpful for the KOMAC beam halo measurements in the future high-current operation.     

Laser Cladding of Copper Alloys on Steel

The paper discusses the process of welding copper-based powder on samples of steel 40 Kh by radiation of a continuous CO2 laser. It is shown that the friction coefficients are 0.014–0.021 for samples cladded by a scanning beam, which is lower by a factor of two than for samples of cast bronze. The effect of transverse beam oscillations on the quality and performance of the cladding process is studied. It is shown that, for a beam scanning frequency of 220 Hz, the cladding performance increases by a factor of 1.5.     

Beam distribution reconstruction simulation for electron beam probe

An electron beam probe(EBP) is a detector which makes use of a low-intensity and low-energy electron beam to measure the transverse profile, bunch shape, beam neutralization and beam wake field of an intense beam with small dimensions. While it can be applied to many aspects, we limit our analysis to beam distribution reconstruction.This kind of detector is almost non-interceptive for all of the beam and does not disturb the machine environment.In this paper, we present the theoretical aspects behind this technique for beam distribution measurement and some simulation results of the detector involved. First, a method to obtain a parallel electron beam is introduced and a simulation code is developed. An EBP as a profile monitor for dense beams is then simulated using the fast scan method for various target beam profiles, including KV distribution, waterbag distribution, parabolic distribution,Gaussian distribution and halo distribution. Profile reconstruction from the deflected electron beam trajectory is implemented and compared with the actual profile, and the expected agreement is achieved. Furthermore, as well as fast scan, a slow scan, i.e. step-by-step scan, is considered, which lowers the requirement for hardware, i.e. Radio Frequency deflector. We calculate the three-dimensional electric field of a Gaussian distribution and simulate the electron motion in this field. In addition, a fast scan along the target beam direction and slow scan across the beam are also presented, and can provide a measurement of longitudinal distribution as well as transverse profile simultaneously. As an example, simulation results for the China Accelerator Driven Sub-critical System(CADS) and High Intensity Heavy Ion Accelerator Facility(HIAF) are given. Finally, a potential system design for an EBP is described.     

Surface profile measurement of low-frequency vibrating objects using temporal analysis of fringe pattern

A simple and accurate algorithm (phase scanning method) is proposed for 3D surface contouring and dynamic response determination of a vibrating object. A sinusoidal fringe pattern is projected onto a low-frequency vibrating object by a programmable liquid crystal display projector. The fringe patterns are captured by a high-speed CCD camera with a telecentric gauging lens. Phase values are evaluated point by point using phase scanning method. From the phase values of each point on the object, the contour of the specimen at different instants of vibration can be retrieved. In this paper, a small vibrating coin is used to demonstrate the validity of the method and the experimental results are compared with test results on a stationary coin using four-step phase shifting and fast Fourier transform methods. The technique is especially useful in applications where the vibrating object has a complicated shape.     

连续振动悬臂梁的瞬时三维形貌测量

提出一种连续振动悬臂梁瞬时三维形貌的测量方法。利用影栅云纹法在连续振动悬臂梁表面产生包含有三维形貌信息的云纹,采用准直双光源提高亮度,通过高速摄相机获取随时间变化的一系列变形条纹,利用傅里叶变换方法对序列图像进行处理,采用补零延拓法对数据进行处理,以减小频谱泄漏所引起的相位计算误差。将相位解包裹方法用于动态过程瞬时三维相位场的相位展开中,重建了悬臂梁的瞬时三维形貌,再现了悬臂梁的连续振动过程。     

Measurements of cavitation bubble dynamics based on a beam-deflection probe

We present an optodynamic measurement of a laser-induced cavitation bubble and its oscillations based on a scanning technique using a laser beam-deflection probe. The deflection of the beam was detected with a fast quadrant photodiode which was built into the optical probe. The applied experimental setup enabled us to carry out one- or two-dimensional scanning of the cavitation bubble, automatic control of the experiment, data acquisition and data processing. Shadow photography was used as a comparative method during the experiments.     

A study on beam profile of an industrial electron accelerator

Experimental evaluation of electron beam profile of a recently upgraded industrial electron accelerator has been carried out to study characteristics of the beam required for the irradiation of various industrial products. Calibrated cellulose triacetate (CTA) film strip dosimeters were used for the measurement of dose profile along and transverse to the scanning direction at different distances in air under the beam extraction window in dynamic (conveyor) and static mode of operation. Two-dimensional dose distribution mapping under the beam has also been measured by using a large number of CTA strip dosimeters. The obtained result shows that the electron beam emerging out from scanning horn has a good uniformity along the scanning direction within 90% of the average maximum dose. Also, the paper reports depth dose distribution in unit density material under the 4.5?MeV beam. Using this study, area affecting dose to the product is controlled within the limit for the irradiation.     

Effect of beam-plasma interaction on ion transport through a cyclotron injector

The influence of collective effects associated with transverse plasma oscillations excited by a beam of negative ions on the neutralization of the space charge due to fast ions is studied. Conditions for the dynamic deneutralization of an unstable ion beam are refined. Analytic expressions for the plasma ion density distribution and for the stationary electric field in a partially neutralized beam are obtained. The equation of motion of a beam in the self-electric field and in an external magnetic field is used to determine the effect of secondary charged particles on the transport of negative ions through the injector of a cyclotron.     

Using the extended Melnikov method to study the multi-pulse global bifurcations and chaos of a cantilever beam

The aim of this paper is to investigate the multi-pulse global bifurcations and chaotic dynamics for the nonlinear non-planar oscillations of a cantilever beam subjected to a harmonic axial excitation and two transverse excitations at the free end by using an extended Melnikov method in the resonant case. First, the extended Melnikov method for studying the Shilnikov-type multi-pulse homoclinic orbits and chaos in high-dimensional nonlinear systems is briefly introduced in the theoretical frame. Then, this method is utilized to investigate the Shilnikov-type multi-pulse homoclinic bifurcations and chaotic dynamics for the nonlinear non-planar oscillations of the cantilever beam. How to employ this method to analyze the Shilnikov-type multi-pulse homoclinic bifurcations and chaotic dynamics of high-dimensional nonlinear systems in engineering applications is demonstrated through this example. Finally, the results of numerical simulation are given and also show that the Shilnikov-type multi-pulse chaotic motions can occur for the nonlinear non-planar oscillations of the cantilever beam, which verifies the analytical prediction.     

Effects of scanning speed on the laser beam profile measurements by vibrating wire

For measuring laser beam profiles, a vibrating wire monitor (VWM) has been introduced. The measurements were carried out at different speeds of scan. Preliminary estimates were made for the calculation of the VWM response times with respect to the thermal losses along the wire, and radiative and convective losses. These estimates, however, do not determine the difference between the beam profile and the frequency response of the VWM for a given scan rate. To evaluate the reliability of the frequency response of the VWM, comparisons between forward and reverse beam scans at different speeds have been used. The results of these scans are used to correct the thermal inertia in the frequency response of the VWM.     

Transverse oscillations of a long-pulse electron beam on alaser-formed channel

An intense relativistic electron beam may be transported in low-pressure gas using an ion channel which focuses and guides the beam. The beam can be unstable to the growth of transverse oscillations caused by the electric force between the beam and channel-the ion hose instability. Beam propagation on channels created by photoionization of gas with an excimer laser is discussed. Ion hose oscillations have been recorded which have a betatron wavelength of approximately 1.5 m. The growth rate of the ion hose instability in the linear regime was measured as 1.67±0.45. At this level of growth, the amplitude of beam oscillations equals the channel radius after a period of one-third of an ion oscillation time     

Beam experiments with a non-intercepting beam induced f luorescence profile monitor for the ADS LINAC

An accelerator-driven subcritical system(ADS) project was launched in China in 2011, aiming to design and build an ADS demonstration facility with the capability of more than 1000 MW thermal power. The driver linac is defined to be a 10 m A current of high energy protons at 1.5 Ge V in continuous wave operation mode. To meet the extremely high power and intense beam accelerator requirements, non-interceptive monitors for the beam transverse profile are required for this proton linac. Taking advantage of the residual gas as active material, the Beam Induced Fluorescence(BIF) monitor exploits gas-excited fluorescence in the visible spectrum region for transverse profile measurements. The advantages of this non-intercepting method are that nothing is installed in the vacuum pipe,component design is compact and there is no need for expensive signal processing electronics. Beam experiments have been performed under constant beam conditions. The helium spectrum has been verified with different optical filters, showing that a proper optical band-pass filter covering 400–500 nm is necessary for fluorescence experiments with helium. By changing gas pressure, it is shown that gas pressure is proportional to the signal amplitude but has no influence on detected profile width. Finally, a comparison experiment between the BIF monitor and a wire scanner shows that the detected profile width results of both methods agree well.     

合肥光源基于同步光的测量与研究

介绍了合肥光源同步光测量系统, 包括条纹相机系统、快速光电测量束团长度系统、束团横向截面测量系统和光位置测量系统. 利用条纹相机系统和快速光电测量束团长度系统进行了束团长度测量和束团伸长效应的研究. 利用束流截面测量系统进行了六极铁对横向不稳定性抑制效果和横向反馈系统反馈效果的测量研究. 光位置测量系统采用丝型光位置检测器和自行研制了对数处理器, 用于测量光源点的束流位置和角度.     

A focussing funnel for metastable helium

We have constructed a magneto-optical funnel for He atoms and studied its properties using a laser cooled, highly mono-energetic atomic beam. A simple model of its action allows us to quantitatively understand the observed spot size and “focal length”. We show that for a fast beam, the velocity damping coefficient plays an important role in determining the focal length of the device. The observed spot size is limited mainly by transverse heating processes which impose a transverse velocity spread. The device also permits easy scanning of the focussed spot. Received 30 October 1998 and Received in final form 27 January 1999     

Diagnostics of Electron Beams Based on Cherenkov Radiation in an Optical Fiber

Russian Physics Journal - The use of an optical fiber in which Cherenkov radiation is generated instead of a metal wire for scanning a beam profile allows a compact and noise-proof device for...     

Yerevan synchrotron injector electron beam transversal scan with vibrating wire scanner

We have developed extended-aperture (20 mm) vibrating wire scanner (VWS) for transversal scanning of electron beams with large transversal size. Test experiments were performed in open atmosphere on the 40 MeV electron beam of the Yerevan synchrotron injector with the 4–10 μA at outlet. A construction of VWS is elaborated for scanning beams with larger transversal size. This elaboration is a new precision tool for diagnostics of beams in accelerators, which may be successfully employed, because of universality of the used operation principle, for profiling of as well large-aperture proton and ion beams.     

氧碘化学激光中的增益光导效应

 发现和分析了氧碘化学激光中的增益光导效应。碘注入的不均匀等导致增益在该方向的不均匀。采用预混模型和Fabry Perot腔模型，推导了碘不均匀分布情况下的单重态氧的产额和激光束横向分布的解析表达式。计算结果表明，由于增益光导效应，引起激光横向分布的变化，可导致光束在碘注入方向的倾斜，以及输出功率的下降。     

Transient beam response in synchrotrons with a digital transverse feedback system

The transient beam response to an external impulse force in synchrotrons with a digital transverse feedback system is studied. The experimental data on damping coherent transverse oscillations of bunch excited by a discrete-time unit impulse in the Large Hadron Collider (LHC) are analyzed. Good agreement between the measured and theoretically predicted decrements has been obtained. A method of feedback fine tuning based on measurements of the bunch response to a harmonic excitation impulse is discussed.     

A study of the effect of laser beam geometries on laser bending of sheet metal by buckling mechanism

Laser beam forming has emerged as a new and very promising technique to form sheet metal by thermal residual stresses. The objective of this work is to investigate numerically the effect of rectangular beam geometries, with different transverse width to length aspect ratio, on laser bending process of thin metal sheets, which is dominated by buckling mechanism. In this paper, a comprehensive thermal and structural finite element (FE) analysis is conducted to investigate the effect that these laser beam geometries have on the process and on the final product characteristics. To achieve this, temperature distributions, deformations, plastic strains, stresses, and residual stresses produced by different beam geometries are compared. The results suggest that beam geometries play an important role in the resulting temperature distributions on the workpiece. Longer beam dimensions in the scanning direction (in relation to its lateral dimension) produce higher temperatures due to longer beam–material interaction time. This affects the bending direction and the magnitude of the bending angles. Higher temperatures produce more plastic strains and hence higher deformation. This shows that the temperature-dependent yield stress plays a more dominant role in the deformation of the plate than the spread of the beam in the transverse direction. Also, longer beams have a tendency for the scanning line to curve away from its original position to form a concave shape. This is caused by buckling which develops tensile plastic strains along both ends of the scanning path. The buckling effect produces the opposite curve profile; convex along the tranverse direction and concave along the scanning path.