具损伤压电智能层合中厚板的非线性动力稳定性分析

基于各向异性损伤理论和压电理论，采用能量法和Lagrange方程，建立了具损伤压电智能层合中厚板在参数激励下的非线性运动控制方程，应用增量谐波平衡法，求解了具损伤压电智能层合中厚板的非线性动力稳定性问题。算例中，分析了损伤参数和压电效应对压电智能层合板非线性动力稳定性的影响，揭示了力电耦合效应的内在特征，并与有关文献的结果进行了比较。     

Nonlinear free vibration analysis of piezoelastic laminated plates with interface damage

This paper presents a nonlinear model for piezoelastic laminated plates with damage effect of the intra-layers and inter-laminar interfaces. Discontinuity of displacement and electric potential on the interfaces are depicted by three shape functions. By using the Hamilton variation principle, the three-dimensional nonlinear dynamic equations of piezoelastic laminated plates with damage effect are derived. Then, by using the Galerkin method, a mathematical solution is presented. In the numerical studies, effects of various factors on the natural frequencies and nonlinear amplitude-frequency response of the simply-supported peizoelastic laminated plates with interfacial imperfections are discussed. These factors include different damage models, thickness of the piezoelectric layer, side-to-thickness ratio, and length-to-width ratio.     

Nonlinear dynamic response and fatigue damage evolution for piezoelectric laminated plates with matrix cracks

Based on the Talreja’s damage model with tensor valued internal state variables, considering the effects of piezoelectricity, geometrical nonlinearity and the constitutive relations of the composite uni-ply plate with matrix cracks, the nonlinear dynamic equations of piezoelectric laminated plates with damage are established and the problems are solved by using the finite difference method. In numerical calculating examples, the nonlinear dynamics responses and the fatigue damage evolution curves of the plates are obtained, and the effects of piezoelectric materials, damage and external load on the nonlinear dynamic response and fatigue damage evolution of the plates are discussed.     

Hamiltonian parametric element and semi-analytical solution for smart laminated plates

Based on the Hellinger-Reissner (H-R) mixed variational principle for piezoelectric material, a unified 4-node Hamiltonian isoparametric element of anisotropy piezoelectric material is established. A new semi-analytical solution for the natural vibration of smart laminated plates and the transient response of the laminated cantilever with piezoelectric patch is presented. The major steps of mathematical model are as follows: the piezoelectric layer and host layer of laminated plate are considered as unattached three-dimensional bodies and discretized by the Hamiltonian isoparametric elements. The control equation of whole structure is derived by considering the compatibility of generalized displacements and generalized stresses on the interface between layers. There is no restriction for the side-face geometrical boundaries, the thickness and the number of layers of plate by the use of the present isoparametric element. Present method has wide application area.     

压电智能结构模糊自学习控制(FSLC)

将模糊逻辑与学习控制的基本思想相结合,根据控制系统的动态输出特性,采用模糊控制对学习控制律中的参数进行实时校正,实现系统的动态学习过程,提出了一种适用于压电智能结构振动控制的模糊自学控制方法FSLC（FuzzySelf-LearningContr01）。分别采用三维8节点实体单元（Solid45）和耦合单元模拟主结构和压电致动器／传感器,基于ANSYS参数化语言编写了压电智能结构振动控制分析的有限元程序。通过数值仿真证明了模糊自学习控制方法能有效控制压电结构的振动,并提高了自学习控制的收敛速度和获得了很好的控制效果。     

Nonlinear dynamic response of piezoelastic laminated plates considering interfacial damage effects

This paper presents a nonlinear model for cross-ply piezoelastic laminated plates containing the damage effect of the intralayer materials and interlaminar interfaces. The model is based on the general six-degrees-of-freedom plate theory, the discontinuity of displacement, and electric potential on the interfaces are depicted by three shape functions, which are formulated according to solutions about three equilibrium equations and conservation of charge. By using the Hamilton variation principle, the three-dimensional nonlinear dynamic equations of piezoelastic laminated plates with damage are presented. Then using the finite difference method and the Newmark scheme, an analytical solution is presented. In numerical examples, the effects of different damage models, damage evolution, amplitude and frequency of electric loads on the nonlinear dynamic response of piezoelectric laminated plate with interfacial imperfections are investigated.     

含有分层损伤的复合材料加筋层合板的屈曲性态研究

基于Ｍｉｎｄｉｎ假定推导了考虑剪切的复合材料加筋层板的有限元列式,并在此基础上计算出筋间基板含嵌入分层以及筋与基板连接处含穿透分层的加筋层合板在受压缩载荷情况下的屈曲模式和临界力。本文所给出的有限元方法及结论对从事复合材料结构设计的工程人员具有参考价值。     

基于高阶位移模式的压电层合板动力有限元模型

建立了含压电片层合板的有限元动力学模型。以位于压电层上下表面处的电场强度和层间电压为未知量,给出了三次函数的电势分布模式,采用Reddy的高阶剪切理论描述板的位移场,假设板厚度方向的正应力为零给出了减缩的本构方程,采用有限元方法,基于Hamilton原理导出结构的动力学方程,然后用静态缩聚的方法压缩掉电场自由度和次要的位移自由度。最后用四边形矩形单元求解了一对称铺层和非对称铺层悬臂板的固有频率,并与ANSYS结果对比验证了本文模型的精确性。     

Static shape control of laminated plate containing piezoelectric patches

By applying the Heaviside function, the equations governing laminated plates possessing spatially distributed piezoelectric patches have been established. Based on these equations, static shape control of laminated plates is discussed. By using a genetic and collocation algorithm, the optimal locations and scales of these piezoelectric patches have been selected. Numerical examples are presented to illustrate the efficiency of the algorithm and the piezoelectric actuators.     

Vibration analysis and active control of nearly periodic two-span beams with piezoelectric actuator/sensor pairs

The piezoelectric materials are used to investigate the active vibration control of ordered/disordered periodic two-span beams. The equation of motion of each sub-beam with piezoelectric patches is established based on Hamilton's principle with an assumed mode method. The velocity feedback control algorithm is used to design the controller. The free and forced vibration behaviors of the two-span beams with the piezoelectric actuators and sensors are analyzed. The vibration properties of the disordered two-span beams caused by misplacing the middle support are also researched. In addition, the effects of the length disorder degree on the vibration performances of the disordered beams are investigated. From the numerical results, it can be concluded that the disorder in the length of the periodic two-span beams will cause vibration localizations of the free and forced vibrations of the structure, and the vibration localization phenomenon will be more and more obvious when the length difference between the two sub-beams increases. Moreover, when the velocity feedback control is used, both the forced and the free vibrations will be suppressed. Meanwhile, the vibration behaviors of the two-span beam are tuned.     

Laminated piezoelectric plate for active underwater acoustic control

The pressure reflected from a bi-laminated piezoelectric plate has been determined using the Thomson-Haskell matrix method. The plate is composed of a piezoelectric layer with grounded vacuum and an elastic layer in contact with the fluid. An incident plane wave in the fluid medium strikes the plate at different angles. The required electric potential across the piezoelectric layer to cancel the reflection from the fluid/elastic boundary has been determined for the piezoelectric material PZT-5 at various thicknes parameters and incident frequencies. Project supported by the National Natural Science Foundation of China (No. 10172039).     

压电复合材料层合板自适应结构的振动控制

本文针对板壳型自适应结构,研究了压电材料作为作动器的自适应结构的振动控制。利用四节点压电复合材料层合板单元进行自适应结构的有限元动力分析;采用模态控制方法,将结构的各阶模态的阻尼比作为控制目标,并以此计算出各压电片的控制电压,达到控制结构振动的目的。算例给出了数值计算的结果。     

Nonlinear bending of simply supported symmetric laminated cross-ply rectangular plates

Based on the von Kármán-type theory of plates,nonlinear bending problems of simplysupported symmetric laminated cross-ply rectangular plates under the combined action ofpressure and inplane load are investigated in this paper.The solution which satisfies thegoverning equations and boundary conditions is obtained by using the double Fourier seriesmethod.     

非线性压电效应下压电弯曲执行器的弯曲

研究压电弯曲执行器在强电场作用下的非线性弯曲行为。考虑电致伸缩和电致弹性的非线性压电效应,导出了压电悬臂执行器自由端挠度或激励力和作用电场之间的非线性关系。结果表明,考虑非线性压电效应在很大的电场范围内都与实验结果吻合得很好,而线性压电效应只适合于低电场的情况。     

基于局部移动Kriging无网格方法的层合板自由振动分析

利用基于局部移动Kriging插值无网格法对层合板自由振动进行了数值分析,基于一阶剪切层合理论导出了层合板振动的控制方程和边界条件,进一步得到了自由振动的离散化特征方程。由于Kriging插值函数具有Kronecker delta函数性质,可以直接施加本质边界条件。通过本文给出的方法,对不同边界条件、不同跨厚比、不同材料参数和铺设角度的层合板的振动频率进行了计算,均得到满意结果。最后用该方法对层合板的铺设角度进行优化设计,得到了与已有文献完全一致的优化结果。数值结果充分表明了无网格Kriging方法分析层合板自由振动问题的有效性和高精确度。     

智能板模态传感与控制的数值分析

智能结构技术对空间大型柔性结构 振动控制问题具有重要意义,采用独立模态空间控制技术对压电智能板进行主动振动控制是一种常用方法,以前对这一问题的研究仅限于解析的方法,本文采用有限单元法,设计了新的压电模态传感器与致动器,该方法能够适用于形状及边界条件较为复杂的智能板,算例分析证明了该方法的正确性。     

复合材料层合板自由振动分析的无网格自然邻接点Petrov-Galerkin法

基于一阶剪切变形理论,提出了复合材料层合板自由振动分析的无网格自然邻接点Petrov-Galerkin法。计算时在复合材料层合板中面上仅需要布置一系列的离散节点,并利用这些节点构建插值函数。在板中面上的局部多边形子域上,采用加权余量法建立复合材料层合板自由振动分析的离散化控制方程,并且这些子域可由Delaunay三角形方便创建。自然邻接点插值形函数具有Kronecker delta函数性质,因而无需经过特别处理就能准确地施加本质边界条件。对不同边界条件、不同跨厚比、不同材料参数和不同铺设角度的复合材料层合板,由本文提出的无网格自然邻接点Petrov-Galerkin法进行自由振动分析时均可得到满意的结果。数值算例结果表明,本文方法求解复合材料层合板的自由振动问题是行之有效的。     

复合材料层合板壳的非线性热动态响应分析

本文基于高阶剪切变形理论，考虑同天应变和横向剪切应变的影响，对受热复合材料层合板壳的非线性热动态响应进行分析，计及了转动惯量的影响，给出了通用性较好的Ｃ＾０类有限元公式，文中数值算同现有文献和三维有限元计算结果进行了比较，证明了本文方法的精确、有效性，文中还就层合板的边界条件、纵厚比及铺设角度对非线性热动态响应的影响进行了分析。     

复合材料层合板的二次屈曲和二次分枝点分析

为了研究复合材料层合板的二次分叉特性 ,利用能量变分原理和非线性几何方程建立了具有弹性约束的复合材料层合板在面内载荷作用下的非线性稳定性控制方程组。控制方程组用广义傅立叶级数法进行求解 ,并得到载荷 -挠度曲线。基于分叉理论中的 Lerray-Schaulder定理 ,采用小挠动法 ,直接导出了复合材料层合板的二次失稳方程。研究结果表明 ,非对称层板也可能存在分叉 ,弹性转动支持系数和铺层等因素对二次分叉有很重要的影响。随着弹性系数的增大 ,二次失稳载荷值与初次失稳载荷值之比下降     

组合荷载作用下层合板非线性弯曲的半解析摄动DQ法

研究不同边界约束层合薄板在面内与横向组合荷载作用下的非线性弯曲问题，给出了基于摄动技术，单向DQ格式和Galerkin法的半解析法，算例表明该方法是可靠有效的。