The influence of the ratio between the selenium: Polyvinylpyrrolidone complex components on the formation and morphological characteristics of nanostructures

Optical and spectral methods were used to study nanostructures formed in the reduction of ionic selenium in the selenite-ascorbate redox system in aqueous solutions of polyvinylpyrrolidone, a physiologically active polymer. The weight ratio between the selenium: polymer complex components (ν) was varied over a wide range (ν = 0.01?0.2). The adsorption of a substantial number of macromolecules (up to 1000 at ν = 0.1?0.2) on selenium nanoparticles was observed experimentally. This resulted in the formation of supramolecular spherical nanostructures with a high polymeric shell density. The Gibbs energies of macromolecule-Se⁰ nanoparticle interactions were calculated for polymeric nanostructures in the region of the formation of stable dispersions. The flow birefringence, dynamic light scattering, and spectrophotometry methods were used to determine the region of saturation of the adsorption capacity of selenium nanoparticles in selenium-containing nanocomposites (ν = 0.1?0.2).     

Morphological characteristics of selenium-containing nanostructures based on rigid-chain molecules

Selenium-containing nanostructures of rigid-chain polymers with close molecular masses were studied by flow birefringence (FB) and static and dynamic light scattering at a fixed selenium to polymer mass ratio ν = 0.1 in solution. The group of polymers under study included the cationic polyelectrolyte poly-N,N,N,N-trimethylmethacryloyloxyethylammonium methyl sulfate, anionic polyelectrolyte carboxymethylcellulose, and nonionogen polymer oxyethylcellulose. High-molecular selenium-containing polymer nanostructures were found in all cases. Nanostructures with a maximum molecular mass and the largest number of constituent macromolecules were obtained using oxyethylcellulose. At ν = 0.1 the mean square radii of inertia of the nanostructures were almost independent of the nature of the polymer matrix. The thermodynamic state of the solutions of nanostructures was close to the ideal one in all cases. For the region where stable dispersions formed, the Gibbs energies of macromolecule-selenium nanoparticle interactions were calculated and shown to be almost independent of the nature of the polymer matrix at ν = 0.1. The close mean square radii of inertia R _g^* of the nanostructures, the Gibbs energies of interaction, and the equivalence of the thermodynamic state of the solutions of nanostructures obtained for all polymer matrices at ν = 0.1 suggest that ν = 0.1 corresponds to the ultimate adsorption capacity of selenium nanoparticles; the considerable differences between the molecular masses (for close R _g ^* values), mean densities, and structural conformation parameters ρ* point to different packings of macromolecules in the nanostructures under study.     

Morphology and thermodynamic characteristics of selenium-containing nanostructures based on polymethacrylic acid

The morphology and thermodynamic characteristics of nanostructures formed as a result of the reduction of the selenium ion in a selenite-ascorbate redox system in water solutions of polymethacrylic acid were studied by molecular optics and atomic-force microscopy. The dependence of the morphology of the selenium-containing nanostructures on the mass selenium-to-polymer ratio (ν) in solution was determined. It was established that a large number of macromolecules (up to 4300) is adsorbed on the selenium nanoparticles, leading to the formation of nanostructures with super-high molecular mass and an almost spherical form. It was shown that the density of the nanostructures, as calculated on the basis of the experimental data on the size and molecular mass of the nanocomposite, depends substantially on the selenium concentrations in the solution. The thermodynamic state of the solutions of nanostructures is described.     

Analytical characterization of laser-generated copper nanoparticles for antibacterial composite food packaging

A new type of nanomaterial has been developed as antibacterial additive for food packaging applications. This nanocomposite is composed of copper nanoparticles embedded in polylactic acid, combining the antibacterial properties of copper nanoparticles with the biodegradability of the polymer matrix. Metal nanoparticles have been synthesised by means of laser ablation, a rising and easy route to prepare nanostructures without any capping agent in a liquid environment. As prepared, nanoparticle suspensions have been easily mixed to a polymer solution. The resulting hybrid solutions have been deposited by drop casting, thus obtaining self-standing antibacterial packages. All samples have been characterized by UV–Vis spectroscopy, X-ray photoelectron spectroscopy and electro-thermal atomic absorption spectroscopy. Ion release data have been matched with bioactivity tests performed by Japanese Industrial Standard (JIS) method (JIS Z 2801:2000) against Pseudomonas spp., a very common Gram-negative microbial group able to proliferate in processed food.     

Measuring the unusually slow ionic diffusion in polyaniline via study of yolk-shell nanostructures

We demonstrate a unique capability in partially oxidizing the oligoaniline shell on gold nanoparticles to polyaniline. Because of the solubility difference, the unreacted inner shell section can be selectively dissolved by 2-propanol, giving yolk-shell nanostructures and, thus, making it possible for assessing the oxidized section. The ionic diffusion through the polymer shell is found to be the rate-determining step in the overall process. Conservative estimates show that the diffusion coefficient of AuCl(4)(-) is at least 700 times slower than that of the typical rate values in traditional studies. It is most likely caused by the lack of micropores in the polymer structures. Such mircopores are hard to avoid in preparing polymer membranes by casting or drying of polymers dissolved in organic solvents. We can rule out the presence of irregular pores on the basis of the uniformly oxidized shell section. With the nanoscale shells, the system is sensitive enough to detect minute changes in the shell or small differences among the individual nanoparticles. Even with a small increase in porosity, for example, when the polyaniline shell is swollen using small amounts of DMF (3%, 5%, or 10% in aqueous solutions), the diffusion coefficient of AuCl(4)(-) increases to 4, 11, and 17 times, respectively. Thus, our study demonstrates a new methodology for studying the diffusion of ions in hydrophobic polymers.     

Heterogeneous Au-Pt nanostructures with enhanced catalytic activity toward oxygen reduction

Heterogeneous Au-Pt nanostructures have been synthesized using a sacrificial template-based approach. Typically, monodispersed Au nanoparticles are prepared first, followed by Ag coating to form core-shell Au-Ag nanoparticles. Next, the galvanic replacement reaction between Ag shells and an aqueous H(2)PtCl(6) solution, whose chemical reaction can be described as 4Ag + PtCl(6)(2-)→ Pt + 4AgCl + 2Cl(-), is carried out at room temperature. Pure Ag shell is transformed into a shell made of Ag/Pt alloy by galvanic replacement. The AgCl formed simultaneously roughens the surface of alloy Ag-Pt shells, which can be manipulated to create a porous Pt surface for oxygen reduction reaction. Finally, Ag and AgCl are removed from core-shell Au-Ag/Pt nanoparticles using bis(p-sulfonatophenyl)phenylphosphane dihydrate dipotassium salt to produce heterogeneous Au-Pt nanostructures. The heterogeneous Au-Pt nanostructures have displayed superior catalytic activity towards oxygen reduction in direct methanol fuel cells because of the electronic coupling effect between the inner-placed Au core and the Pt shell.     

Microwave-assisted synthesis of metallic nanostructures in solution

Microwave (MW) rapid heating has received considerable attention as a new promising method for the one-pot synthesis of metallic nanostructures in solutions. In this concept, advantageous application of this method has been demonstrated by using some typical examples for the preparation of Ag, Au, Pt, and AuPd nanostructures. Not only spherical nanoparticles, but also single crystalline polygonal plates, sheets, rods, wires, tubes, and dendrites were prepared within a few minutes under MW heating. Morphologies and sizes of nanostructures could be controlled by changing various experimental parameters, such as the concentration of metallic salt and surfactant polymer, the chain length of the surfactant polymer, the solvent, and the reaction temperature. In general, nanostructures with smaller sizes, narrower size distributions, and a higher degree of crystallization were obtained under MW heating than those in conventional oil-bath heating. The origin of these characteristic features under MW irradiation is discussed in terms of thermal and non-thermal effects under MW irradiation.     

Langmuir-Blodgett monolayers of gold nanoparticles with amphiphilic shells from V-shaped binary polymer arms

Gold nanoparticles functionalized with amphiphilic polybutadiene-poly(ethylene glycol) (PB-PEG) V-shaped arms formed stable Langmuir monolayers at the air-water and the air-solid interfaces. At these interfaces, the binary arms vertically segregated into a dense polymer corona, which surrounded the gold nanoparticles, preventing their large-scale agglomeration and keeping individual nanoparticles well-separated from each other and forming flattened, pancake nanostructures. The presence of both PEG and PB chains in the close proximity to the gold core was confirmed by surface enhanced Raman spectroscopy, whereas the AFM phase contrast images revealed the presence of 2 nm gold cores surrounded by the polymer shell with the diameter of 11 nm. We suggest that the amphiphilic shell drives their spontaneous organization into discrete 2D pancake-like hybrid structures that measured up to 10 microm in diameter and had a high packing density of gold clusters.     

The influence of the nature of a nanoparticle and polymer matrix on the morphological characteristics of polymeric nanostructures

Comparative studies of the morphological characteristics of selenium- and platinum-containing nanostructures were performed by molecular optics methods. The nanostructures were based on an ionogenic polymeric stabilizer, poly-N,N,N,N-trimethylmethacryloyloxyethylammonium methyl sulfate, and a non-ionogenic polymeric stabilizer, oxyethylcellulose. Studies were performed in aqueous solutions at a fixed ratio between components. The adsorption of a considerable number of polymer macromolecules on nanoparticles with the formation of superhigh-molecular-weight nanostructures with shapes close to spherical was observed for all the nanosystems studied. The thermodynamic state of nanosystems was characterized. Certain morphological characteristics of nanostructures were substantially influenced by the nature of both nanoparticles and polymer matrix.     

Single nanoparticle plasmonic devices by the "grafting to" method

Hierarchically organized single-nanoparticle structures synthesized in this work consisted of a 200 nm silica core and a pH-responsive poly(2-vinylpyridine) shell decorated with 15 nm gold nanoparticles. pH changes in the range of 3-6 back and forth results in a swelling-shrinking polymer brush shell and, thus, in the tuning distance between noble nanoparticles. A change in the interparticle distance is accompanied by a very pronounced shift in the maximum wavelength of the surface plasmon absorption peak. The dispersion of the resulting composite nanoparticles reversibly changed color from red to purple-blue as the pH changed from 2.5 to 6. Such hierarchically assembled nanostructures can be used as free-standing single-particle sensors in various miniaturized analytical systems.     

The Influence of Polymer—Selenium Complex Components and the Molecular Weight of the Ionogenic Polymeric Matrix on the Morphologic Characteristics of Selenium-Containing Nanostructures

Several optical methods were used to study nanostructures formed in the reduction of selenium ions in the selenite—ascorbate redox system in an aqueous solution of the poly-N,N,N,N-trimethylmethacryloyloxyethylammonium methyl sulfate polycation. The relation between the molecular weight of the polymeric matrix, which varied over a wide range, M _w = (0.03?13) × 10⁶, and the morphologic characteristics of nanostructures (molecular weight, density, shape, and statistical and hydrodynamic dimensions) was established. The weight ratio between the components of the polymer: selenium complex and the concentration of the polymer in the reaction mixture were shown to substantially influence certain morphologic characteristics of nanostructures. In the region of the formation of stable dispersions, the Gibbs energy of macromolecule—Se⁰ nanoparticle interactions was calculated. The thermodynamic state of solutions of nanostructures was characterized.     

Synthesis of diblock copolymers with cellulose derivatives 4. Self-assembled nanoparticles of amphiphilic cellulose derivatives carrying a single pyrene group at the reducing-end

Self-assembled cellulose-pyrene nanoparticles were prepared from amphiphilic cellulose derivatives carrying a single pyrene group at the reducing-end, N-(1-pyrenebutyloyl)-β-cellulosylamine (CELL13Py and CELL30Py, the number average degrees of polymerization (DP_n) of 13 and 30, respectively) and N-(15-(1-pyrenebutyloylamino)-pentadecanoyl)-β-cellulosylamine (CELL13C15Py and CELL30C15Py, DP_n of 13 and 30, respectively). Transmission electron microscopy (TEM) observation revealed that CELL13C15Py and CELL30C15Py formed self-assembled nanoparticles with the average diameters of 108.8 and 40.0 nm, respectively. The average radius of CELL30C15Py nanoparticles (20.0 nm) agreed well with the molecular length of its cellulose chain (19.2 nm). CELL30C15Py nanoparticles were expected to have monolayered structure, consisting of cellulose shell with radial orientation and hydrophobic core of 15-(1-pyrenebutyloylamino)-pentadecanoyl groups. The fluorescent spectrum of CELL30C15Py nanoparticles showed an excimer emission due to dimerized pyrene groups, indicating that the pyrene groups at the reducing-end of cellulose are associating in the particles. The balance of hydrophilic and hydrophobic parts of the cellulose derivatives controlled their self-assembled nanostructures. X-ray diffraction measurements revealed that radially oriented cellulose chains of CELL30C15Py nanoparticles were mostly amorphous, and at the same time exhibited weak reflection pattern of cellulose II, which is believed to have anti-parallel orientation.     

Strategies toward well‐defined polymer nanoparticles inspired by nature: Chemistry versus versatility

Polymeric nanoparticles are promising delivery platforms for various biomedical applications. One of the main challenges toward the development of therapeutic nanoparticles is the premature disassembly and release of the encapsulated drug. Among the different strategies to enhance the kinetic stability of polymeric nanoparticles, shell‐ and core‐crosslinking have been shown to provide robust character, while creating a suitable environment for encapsulation of a wide range of therapeutics, including hydrophilic, hydrophobic, metallic, and small and large biomolecules, with gating of their release as well. The versatility of shell‐ and core‐crosslinked nanoparticles is driven from the ease by which the structures of the shell‐ and core‐forming polymers and crosslinkers can be modified. In addition, postmodification with cell‐recognition moieties, grafting of antibiofouling polymers, or chemical degradation of the core to yield nanocages allow the use of these robust nanostructures as “smart” nanocarriers. The building principles of these multifunctional nanoparticles borrow analogy from the synthesis, supramolecular assembly, stabilization, and dynamic activity of the naturally driven biological nanoparticles such as proteins, lipoproteins, and viruses. In this review, the chemistry involved during the buildup from small molecules to polymers to covalently stabilized nanoscopic objects is detailed, with contrast of the strategies of the supramolecular assembly of polymer building blocks followed by intramicellar stabilization into shell‐, core‐, or core–shell‐crosslinked knedel‐like nanoparticles versus polymerization of polymers into nanoscopic molecular brushes followed by further intramolecular covalent stabilization events. The rational design of shell‐crosslinked knedel‐like nanoparticles is then elaborated for therapeutic packaging and delivery, with emphasis on the polymer chemistry aspects to accomplish the synthesis of such nanoparticulate systems. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

壳核型磁性纳米纤维素微球的超声制备及表征

A kind of cellulose magnetic nanoparticle with a core / shell structure has been prepared by ultrasonic irradiation. Cellulose acts as the shell while Fe3O4 magnetic nanoparticles take the role as the core. Magnetic force microscopy（MFM）with atomic force microscopy（AFM）measurement showed that the size of the magnetic nanoparticles is about 30-50 nm in diameter,while the Fe3O4 core is about 20-30 nm. FT-IR,XRD and MFM was used to provide the chemical and magnetic information of the nanoparticles. The MFM image showed that the nanoparticles separate very well with each other,indicating the cellulose shell produces a good prevention from the aggregation of the Fe3O4 particles. MFM studies also showed two magnetic nanoparticles can form particle-pairs,indicating a weak magneto-dipole interaction between magnetic nanoparticles. It is also found that the average sizes of magnetic nanoparticles have relation to the power of ultrasonic irradiation,and the possible mechanism is discussed.     

Self-organization and morphological characteristics of selenium-containing nanostructures based on rigid-chain polymers

Macroinitiators containing β-diketonate fragments were prepared by copolymerization of styrene with cobalt(II) 5-Formation and morphological characteristics of selenium-containing nanostructures formed by reduction of selenious acid with ascorbic acid in the presence of ionic or nonionic polymeric stabilizer in aqueous solutions were studied by methods of nonlinear optics and flow birefringence at widely varied selenium to polymer weight ratio in solution ν. The molecular weights, root-mean-square and hydrodynamic sizes, and mean density of the nanostructures were calculated, and the trends in variation of these quantities were compared.     

Flame-retarded hydrophobic cellulose through impregnation with aqueous solutions and supercritical CO2

We have developed flame-retarded hydrophobic cellulose-based materials by producing in situ water-soluble and insoluble inorganic microparticles on various surfaces of native cellulose (filter paper and pure cotton textile). The nanoparticles were produced by simple impregnation of cellulose with two different aqueous solutions followed by a third impregnation with supercritical CO₂. Finally, the composite cellulose materials were covered by a silicon-based polymer thin film, to turn it into hydrophobic and prevent the water-soluble particles from absorbing humidity. The obtained flame-retardant behaviour is due to a combination of mechanisms. The total treatment of cellulose has an impact on, both its surface morphology and its hydrophilicity. Thus, the hydrophobic nature of the silicon-based polymer film along with the roughness caused by the presence of the inorganic particles and the inherent roughness of native cellulose resulted in superhydrophobic behaviour. The same process-concept was also applied to regenerated (from newspaper) cellulose with ionic liquids. The produced materials were characterised by thermogravimetric analysis, differential scanning calorimetry, infrared spectroscopy, scanning electron microscopy and water contact angle measurements.     

Nanodroplets of polyisoprene fluid contained within poly(acrylic acid‐co‐acrylamide) shells

The preparation and characterization of macromolecular nanostructures possessing an amphiphilic core–shell morphology with a hydrophobic, fluidlike core domain with a low glass‐transition temperature are described. The nanostructures were prepared by the self‐assembly of polyisoprene‐b‐poly(acrylic acid) diblock copolymers into polymer micelles, followed by crosslinking of the hydrophilic shell layer via condensation between the acrylic acid functionalities and 2,2′‐(ethylenedioxy)bis(ethylamine), in the presence of 1‐(3′‐dimethylaminopropyl)‐3‐ethylcarbodiimide methiodide. The properties of the resulting shell‐crosslinked knedel‐like (SCK) nanoparticles were dependent on the microstructure and properties of the polyisoprene core domain. SCKs containing polyisoprene with a mixture of 3,4‐ and 1,2‐microstructures underwent little shape distortion upon adsorption from aqueous solutions onto mica or graphite. In contrast, when SCKs were composed of polyisoprene of predominantly cis‐1,4‐repeat units, the glass‐transition temperature was ?65 °C, and the nanospheres deformed to a large extent upon adsorption onto a hydrophilic substrate (mica). Adsorption onto graphite gave a less pronounced deformation, as determined by a combination of transmission electron microscopy and atomic force microscopy. Subsequent crosslinking of the core domain (in addition to the initial shell crosslinking) dramatically reduced the fluid nature and, therefore, reduced the SCK shape change. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1659–1668, 2003     

Ag@C core/shell structured nanoparticles: controlled synthesis, characterization, and assembly

Silver nanoparticles with tunable sizes were encapsulated in a carbonaceous shell through a green wet chemical route-the catalyzed dehydration of glucose under hydrothermal condition. In this one-pot synthesis, glucose was used as the reducing agent to react with Ag+ or Ag(NH3)2+, and it also served as the source of carbonaceous shells. The effects of hydrothermal temperature, time, and the concentrations of reagents on formation of the final nanostructures were systematically studied. The presence of competitive molecules poly(vinyl pyrrolidone) was found to be able to relieve the carbonization process, to incorporate themselves into carbonaceous shell, and to make the carbonaceous shell colorless. All these approaches provided diverse means to tailor the Ag@C nanostructures. By evaporation of the solvents gradually in a moist atmosphere, the monodispersed nanoparticles could self-assemble into arrays. Transmission electron microscopy, scanning electron microscopy, and UV-vis extinction spectra and surface-enhanced Raman spectra were used to characterize the core/shell nanostructures. These Ag@C core/shell nanoparticles have hydrophilic, organic-group-loaded surfaces and characteristic optical properties, which indicated their promising applications in optical nanodevices and biochemistry.     

Control of buckling in colloidal droplets during evaporation-induced assembly of nanoparticles

Micrometric grains of anisotropic morphology have been achieved by evaporation-induced self-assembly of silica nanoparticles. The roles of polymer concentration and its molecular weight in controlling the buckling behavior of drying droplets during assembly have been investigated. Buckled doughnut grains have been observed in the case of only silica colloid. Such buckling of the drying droplet could be arrested by attaching poly(ethylene glycol) on the silica surface. The nature of buckling in the case of only silica as well as modified silica colloids has been explained in terms of theory of homogeneous elastic shell under capillary pressure. However, it has been observed that colloids, modified by polymer with relatively large molecular weight, gives rise to buckyball-type grains at higher concentration and could not be explained by the above theory. It has been demonstrated that the shell formed during drying of colloidal droplet in the presence of polymer becomes inhomogeneous due to the presence of soft polymer rich zones on the shell that act as buckling centers, resulting in buckyball-type grains.     

Aggregation-free and high stability core–shell polymer nanoparticles with high fullerene loading capacity,variable fullerene type,and compatibility towards biological conditions

Fullerenes have unique structural and electronic properties that make them attractive candidates for diagnostic, therapeutic, and theranostic applications. However, their poor water solubility remains a limiting factor in realizing their full biomedical potential. Here, we present an approach based on a combination of supramolecular and covalent chemistry to access well-defined fullerene-containing polymer nanoparticles with a core–shell structure. In this approach, solvophobic forces and aromatic interactions first come into play to afford a micellar structure with a poly(ethylene glycol) shell and a corannulene-based fullerene-rich core. Covalent stabilization of the supramolecular assembly then affords core-crosslinked polymer nanoparticles. The shell makes these nanoparticles biocompatible and allows them to be dried to a solid and redispersed in water without inducing interparticle aggregation. The core allows a high content of different fullerene types to be encapsulated. Finally, covalent stabilization endows nanostructures with stability against changing environmental conditions.

A polymer nanoparticle approach to biorelevant and robust fullerene nanoparticles is presented.