Ultrasmall Cu7S4@MoS2 Hetero‐Nanoframes with Abundant Active Edge Sites for Ultrahigh‐Performance Hydrogen Evolution

Increasing the active edge sites of molybdenum disulfide (MoS₂) is an efficient strategy to improve the overall activity of MoS₂ for the hydrogen‐evolution reaction (HER). Herein, we report a strategy to synthesize the ultrasmall donut‐shaped Cu₇S₄@MoS₂ hetero‐nanoframes with abundant active MoS₂ edge sites as alternatives to platinum (Pt) as efficient HER electrocatalysts. These nanoframes demonstrate an ultrahigh activity with 200 mA cm^?2 current density at only 206 mV overpotential using a carbon‐rod counter electrode. The finding may provide guidelines for the design and synthesis of efficient and non‐precious chalcogenide nanoframe catalysts.     

Following the Reaction of Heteroanions inside a {W18O56} Polyoxometalate Nanocage by NMR Spectroscopy and Mass Spectrometry

By incorporating phosphorus(III)‐based anions into a polyoxometalate cage, a new type of tungsten‐based unconventional Dawson‐like cluster, [W₁₈O₅₆(HP^IIIO₃)₂(H₂O)₂]^8?, was isolated, in which the reaction of the two phosphite anions [HPO₃]^2? within the {W₁₈O₅₆} cage could be followed spectroscopically. As well as full X‐ray crystallographic analysis, we studied the reactivity of the cluster using both solution‐state NMR spectroscopy and mass spectrometry. These techniques show that the cluster undergoes a structural rearrangement in solution whereby the {HPO₃} moieties dimerize to form a weakly interacting (O₃PH???HPO₃) moiety. In the crystalline state the cluster exhibits a thermally triggered oxidation of the two P^III template moieties to form P^V centers (phosphite to phosphate), commensurate with the transformation of the cage into a Wells–Dawson {W₁₈O₅₄} cluster.     

Selective inclusion of Cu+ and Ag+ electron-rich metallic cations within supramolecular polyoxometalates based on {AsW9O33}{Mo3S4} combinations

Coordination of the [Mo(3)S(4)(H(2)O)(9)](4+) cluster with the trivacant [AsW(9)O(33)](9-) ion gives the supramolecular complex [{(H(4)AsW(9)O(33))(4)(Mo(3)S(4){H(2)O}(5))}(2)](12-) (1) in good yield. The structure of 1 shows that two [H(4)AsW(9)O(33)](5-) subunits sandwich a single central [Mo(3)S(4)(H(2)O)(5)](4+) ion to give a basic monomeric unit [(H(4)AsW(9)O(33))(2){Mo(3)S(4)(H(2)O)(5)}](6-). In the solid state, a supramolecular dimeric association is evidenced that consists of two [(H(4)AsW(9)O(33))(2){Mo(3)S(4)(H(2)O)(5)}](6-) units held together by twelve hydrogen bonds and four SS contacts. Complex 1 reacts with NaAsO(2), AgNO(3) and CuI to give compounds 2, 3 and 4, respectively. X-ray structural analysis reveals that the molecular arrangements of 2 to 4 are closely related to the parent structure of 1. {AsOH}(2+), Ag(+) and Cu(+) ions are located on three distinct pairs of sites. Two hanging {AsOH}(2+) groups in 2 are symmetrically attached to two opposite {AsW(9)O(33)} subunits. Complex 3 is the first example of an Ag/{Mo(3)S(4)} combination in which the environment of the two equivalent Ag(+) cations is remarkable for containing two sulfur atoms belonging to {Mo(3)S(4)}, two oxygen and one central arsenic atom of the {AsW(9)O(33)} subunits. Potentiometric titration shows that the addition of Ag(+) ions is quantitative and occurs in two successive steps (K(1)=4.1 x 10(6) and K(2)=2.3 x 10(5) L mol(-1)), which is consistent with the retention of the supramolecular cluster in solution. The structure of 4 reveals a single copper atom embedded in the central part of the dimer. The Cu(+) cation is bound to four sulfur atoms to complete a cuboidal moiety. UV/Vis studies in solution indicate that the stability of the dimeric assemblies of 2, 3 and 4 is significantly enhanced by the presence of Cu(+) or Ag(+) ions, which act as additional coordination linkers within the supramolecular cluster. The anions 1 to 4 were characterised by (183)W NMR spectroscopy in solution. The 10-line spectra recorded for each of them are consistent with an averaged C(2h) molecular symmetry in solution.     

[{Ni4(OH)3AsO4}4(B‐α‐PW9O34)4]28−: A New Polyoxometalate Structural Family with Catalytic Hydrogen Evolution Activity

A new structural polyoxometalate motif, [{Ni₄(OH)₃AsO₄}₄(B‐α‐PW₉O₃₄)₄]^28?, which contains the highest nuclearity structurally characterized multi‐nickel‐containing polyanion to date, has been synthesized and characterized by single‐crystal X‐ray diffraction, temperature‐dependent magnetism and several other techniques. The unique central {Ni₁₆(OH)₁₂O₄(AsO₄)₄} core shows dominant ferromagnetic exchange interactions, with maximum χ_mT of 69.21 cm³ K mol^?1 at 3.4 K. Significantly, this structurally unprecedented complex is an efficient, water‐compatible, noble‐metal‐free catalyst for H₂ production upon visible light irradiation (photosensitizer=[Ir(ppy)₂(dtbbpy)][PF₆]; sacrificial electron donor=triethylamine or triethanolamine). The highest turnover number of approximately 580, corresponding to a best quantum yield of approximately 4.07 %, is achieved when using triethylamine as electron donor in the presence of water. The mechanism of this photodriven process has been probed by time‐solved luminescence and by static emission quenching.     

Enantioselective Recognition of Racemic Amino Alcohols in Aqueous Solution by Chiral Metal-Oxide Keplerate {Mo132} Cluster Capsules

Determining the relative configuration or enantiomeric excess of a substance may be achieved using NMR spectroscopy by employing chiral shift reagents (CSRs). Such reagents interact noncovalently with the chiral solute, resulting in each chiral form experiencing different magnetic anisotropy; this is then reflected in their NMR spectra. The Keplerate polyoxometalate (POM) is a molybdenum-based, water-soluble, discrete inorganic structure with a pore-accessible inner cavity, decorated by differentiable ligands. Through ligand exchange from the self-assembled nanostructure, a set of chiral Keplerate host molecules has been synthesised. By exploiting the interactions of analyte molecules at the surface pores, the relative configuration of chiral amino alcohol guests (phenylalaninol and 2-amino-1-phenylethanol) in aqueous solvent was establish and their enantiomeric excess was determined by ¹H NMR using shifts of ΔΔδ=0.06 ppm. The use of POMs as chiral shift reagents represents an application of a class that is yet to be well established and opens avenues into aqueous host-guest chemistry with self-assembled recognition agents.     

Synthesis,Structure and Light-Driven H2 Production of a {Ti21} Titanium-Oxo Cluster Featuring Pentagonal {Ti(Ti5)} Motifs

Pentagonal {Ti(Ti₅)} motifs play a crucial role during the assembly of novel titanium-oxide clusters (TOCs), whose development is still in its infancy. In this work, an unprecedented TOC [(CH₃)₂NH₂]₂[Ti₂₁O₂₉(OiPr)₁₂(DMF)₆(SO₄)₈] ({Ti₂₁}) based on {Ti(Ti₅)} motifs had been obtained under hydrothermal conditions. It possesses ‘fused’ dimeric {Ti₁₁} as well as trimeric {Ti₁₂} subunits featuring unexpected bonding modes based on pentagonal {Ti(Ti₅)} motifs. Furthermore, {Ti₂₁} exhibits good water and solvent tolerance. As an atomically precise TOCs-based semiconductor photocatalyst, {Ti₂₁} exhibits appreciable photocatalytic hydrogen evolution activity with an optimal hydrogen generation rate of 191.94 μmol/g/h under UV/Vis light. This work provides significant advances and favorable models for the further synthesis of TOCs with unique structure and functionality.     

Nanoscale Control of Polyoxometalate Assembly: A {Mn8W4} Cluster within a {W36Si4Mn10} Cluster Showing a New Type of Isomerism

Two near isomeric clusters containing a novel {Mn₈W₄} Keggin cluster within a [W₃₆Mn₁₀Si₄O₁₃₆(OH)₄(H₂O)8]^24? cluster are reported: K₁₀Li₁₄ [W₃₆Si₄O₁₃₆Mn^II₁₀(OH)₄(H₂O)₈] ( 1 ) and K₁₀Li1_3.5Mn_0.25[W₃₆Si₄O₁₃₆Mn^II₁₀(OH)₄(H₂O)₈] ( 1′ ). Bulk characterization of the clusters has been carried out by single crystal X‐ray structure analysis, ICP‐MS, TGA, ESI‐MS, CV and SQUID‐magnetometer analysis. X‐ray analysis revealed that 1′ has eight positions within the central Keggin core that were disordered W/Mn whereas 1 contained no such disorder. This subtle difference is due to a differences is how the two clusters assemble and recrystallize from the same mother liquor and represents a new type of isomerism. The rapid recrystallization process was captured via digital microscopy and this uncovered two “intermediate” types of crystal which formed temporarily and provided nucleation sites for the final clusters to assemble. The intermediates were investigated by single crystal X‐ray analysis and revealed to be novel clusters K₄Li₂₂[W₃₆Si₄Mn₇O₁₃₆(H₂O)₈]?56 H₂O ( 2 ) and Mn₂K₈Li₁₄[W₃₆Si₄Mn₇O₁₃₆(H₂O)₈]?45 H₂O ( 3 ). The intermediate clusters contained different yet related building blocks to the final clusters which allowed for the postulation of a mechanism of assembly. This demonstrates a rare example where the use X‐ray crystallography directly facilitated understanding the means by which a POM assembled.     

Encapsulation of Arenes within a Porous Molybdenum Oxide {Mo132} Nanocapsule

The use of confined space to modulate chemical reactivity and to sequester organic compounds spans significant disciplines in chemistry and biology. Here, the inclusion and assembly of arenes into a water‐soluble porous metal oxide nanocapsule [{(Mo^VI)Mo^V₅O₂₁(H₂O)₆}₁₂{Mo^V₂O₄(CH₃COO)}₃₀]^42? (Mo₁₃₂) is reported. The uptake of benzene, halobenzenes, alkylbenzenes, phenols, and other derivatives was studied by NMR, where it was possible to follow the encapsulation process from the outside of the capsule through its pores and then into the interior. The importance of size or shape of the arenes, and various intermolecular bond interactions contributed by the benzene substituent on the encapsulation process was studied, showing the importance of π–π stacking and CH–π interactions. Furthermore, by using NOESY, ROESY, and HOESY NMR techniques it was possible to understand the interaction of the encapsulated arenes and the acetate linkers or ligands that line the interior of the Mo₁₃₂ capsule.     

Synthesis and Characterization of 1,3,2‐Bis (arylamino) phospholidine, 2‐oxide Derivatives: Crystal Structures of $\rm Cl(O)\overline{PN(p-Me-C_{6}H_{4})CH_{2}CH_{2}N}(p-Me-C_{6}H_{4})$ and $\rm ((CH_{2}C_{6}H_{5})(O)\overline{PN(p-Me-C_{6}H_{4})CH_{2}CH_{2}N}(p-Me-C_{6}H_{4})$

Using phosphoryl chloride as a substrate, a family of 1,3,2‐bis(arylamino) phospholidine, 2‐oxide of the general formula ; (X=Cl, 6a ; X=NMe₂, 1b ; X=N(CH₂C₆H₅)(CH₃), 2b ; X=NHC(O)C₆H₅, 3b ; X=4Me‐C₆H₄O, 4b ; X=C₆H₅O, 5b ; X=NHC₆H₁₁, 6b ; X=OC₄H₈N, 7b ; X=C₅H₁₀N, 8b ; X=NH₂, 9b ; X=F, 10b and Ar=4Me‐C₆H₄) was prepared and characterized by ¹H, ¹⁹F, ³¹P and ¹³C NMR and IR spectroscopy, and elemental analysis. A general and practical method for the synthesis of these compounds was selected. The structures of 6a and 2b were determined by single‐crystal X‐ray diffraction techniques. The low temperature NMR spectra of 2b revealed the restricted rotation of P‐N bond according to two independent molecules in crystalline lattice.     

Electrochemical Properties of a Rhodium(III) Mono-Terpyridyl Complex and Use as a Catalyst for Light-Driven Hydrogen Evolution in Water

Molecular hydrogen (H₂) is considered one of the most promising fuels to decarbonize the industrial and transportation sectors, and its photocatalytic production from molecular catalysts is a research field that is still abounding. The search for new molecular catalysts for H₂ production with simple and easily synthesized ligands is still ongoing, and the terpyridine ligand with its particular electronic and coordination properties, is a good candidate to design new catalysts meeting these requirements. Herein, we have isolated the new mono-terpyridyl rhodium complex, [Rh^III(tpy)(CH₃CN)Cl₂](CF₃SO₃) (Rh-tpy), and shown that it can act as a catalyst for the light-induced proton reduction into H₂ in water in the presence of the [Ru(bpy)₃]Cl₂ (Ru) photosensitizer and ascorbate as sacrificial electron donor. Under photocatalytic conditions, in acetate buffer at pH 4.5 with 0.1 M of ascorbate and 530 μM of Ru, the Rh-tpy catalyst produces H₂ with turnover number versus catalyst (TON_Cat*) of 300 at a Rh concentration of 10 μM, and up to 1000 at a concentration of 1 μM. The photocatalytic performance of Ru/Rh-tpy/HA^–/H₂A has been also compared with that obtained with the bis-dimethyl-bipyridyl complex [Rh^III(dmbpy)₂Cl₂]⁺ (Rh2) as a catalyst in the same experimental conditions. The investigation of the electrochemical properties of Rh-tpy in DMF solvent reveals that the two-electrons reduced state of the complex, the square-planar [Rh^I(tpy)Cl] (Rh^I-tpy), is quantitatively electrogenerated by bulk electrolysis. This complex is stable for hours under an inert atmosphere owing to the π-acceptor property of the terpyridine ligand that stabilizes the low oxidation states of the rhodium, making this catalyst less prone to degrade during photocatalysis. The π-acceptor property of terpyridine also confers to the Rh-tpy catalyst a moderately negative reduction potential (Ep_c(Rh^III/Rh^I) = −0.83 V vs. SCE in DMF), making possible its reduction by the reduced state of Ru, [Ru^II(bpy)(bpy^•−)]⁺ (Ru⁻) (E_1/2(Ru^II/Ru⁻) = −1.50 V vs. SCE) generated by a reductive quenching of the Ru excited state (*Ru) by ascorbate during photocatalysis. A Stern–Volmer plot and transient absorption spectroscopy confirmed that the first step of the photocatalytic process is the reductive quenching of *Ru by ascorbate. The resulting reduced Ru species (Ru⁻) were then able to activate the Rh^III-tpy H₂-evolving catalyst by reduction generating Rh^I-tpy, which can react with a proton on a sub-nanosecond time scale to form a Rh^III(H)-tpy hydride, the key intermediate for H₂ evolution.     

Synthesis and Characterization of the New Cluster Complex {Mo3S4} with the Hemilabile Phosphine-Selenoether Ligand

Russian Journal of Coordination Chemistry - The reaction of [Mo3S4(Tu)8(H2O)]Cl4·4H2O (Tu is thiourea) with (PhCH2CH2)2-PCH2CH2SeC5H11) (PSe) followed by purification on a chromatographic...     

Assembly of a family of mixed metal {Mo:V} polyoxometalates templated by TeO3(2-): {Mo12V12Te3}, {Mo12V12Te2} and {Mo17V8Te}

The influence of the pyramidal heteroanion, TeO(3)(2-) in the self-assembly of mixed metal (Mo/V) systems, is demonstrated by the isolation of three novel mixed-metal, mixed-valence architectures, {Mo(12)V(12)Te(3)} (1), {Mo(12)V(12)Te(2)} (2) and {Mo(17)V(8)Te} (3) with the tellurium centres exhibiting the novel μ(8)-TeO(4) and μ(9)-TeO(3) coordination modes while compounds 1 and 2 were discovered utilizing ESI mass spectrometry.     

{AsW9O33}-{Mo3S4} based polyoxometalates including a metal-metal bond with Pd or Ni. Synthesis, structure and studies in solution

Heterometallic cuboidal clusters [Mo(3)S(4)M(H(2)O)(9)Cl](3+) M = Pd or Ni react with the trivacant [AsW(9)O(33)](9-) anion to give tetramodular complexes [(H(2)AsW(9)O(33))(4){Mo(3)S(4)M(H(2)O)(5)}(2)](20-) (M = Pd for anion 2 and M = Ni for anion 3) in good yield. Both anions crystallized as single crystals of potassium salts to give K-2 and K-3 salts which have been characterized structurally by X-ray diffraction. Both compounds are isomorphous and the anions 2 and 3 are described as two dimeric moeties, associated by internal hydrogen bonds, electrostatic interactions involving four outer potassium ion and coordination bonds within a central {M(2)S(2)} unit containing a M-M metallic bond. Studies in solution reveal that the dimeric association is maintained in solution in the 2 × 10(-4)-2 × 10(-3) mol L(-1) range. Conversely, in the presence of exogeneous ligands, such as iodide or pyridine the UV-vis data are consistent with the dissociation of the anion 2 into monomer through a Pd-L coordination bond (L = I(-) or Py). Furthermore, (183)W NMR spectrum of 2 shows that molecular structure of 2 is retained in solution. Elemental analysis and IR are also supplied. Electrochemical behavior of 2 and 3 are given and compared with the Pd or Ni free parent anion. The CVs are dominated mainly by irreversible reduction or oxidation processes, where the peak potentials appear dependent upon the ionic charge of the complex. However, the CV of the Pd-containing anion (2) is consistent with the deposition of Pd metal at the electrode, which gives rise to an oxidation process into palladium oxide.