ZIF-8原位负载Pd纳米粒子及其在Suzuki-Miyaura反应中的应用(英文)

将PdCl2与ZIF-8的反应原料ZnO和2-甲基咪唑按照一定的比例,采用机械化学法原位将Pd2+负载在ZIF-8上(Pd2+/ZIF-8)。然后用NaBH4将Pd2+/ZIF-8进行还原,得到均匀分散的Pd纳米颗粒(Pd/ZIF-8)。通过XRD、N2吸附、透射电镜、ICP-AES、XPS等对Pd/ZIF-8的结构、形貌、价态等进行了表征。结果表明用机械化学法原位制备的Pd/ZIF-8具有分散均匀、容易大量制备的优点。该催化剂不仅能高效催化Suzuki-Miyaura交叉偶联反应,并且能够多次循环利用。     

Water stability of cobalt doped ZIF-8: a quantitative study using optical analyses

Zeolitic imidazolate frameworks (ZIFs), in particular ZIF-8 (made of Zn²⁺ and 2-methyilimidazolate) and cobalt-doped-ZIF-8, are found important for many energy and environmental applications. It was reported that ZIFs show excellent structural stability in water and thus ideal for aqueous applications. However, recent studies also found some evidence that ZIF-8 undergoes hydrolysis in water. Despite the importance of ZIF's stability in many aqueous applications, the extent of ZIFs' degradation in water is still not yet fully understood. In this study, we report a quantitative study of the water stability of 0–100 at% cobalt-doped ZIF-8, using a new combination of analytical tools. The study demonstrated the importance of analyzing both filtered powders and the filtrate liquid systematically, in particular by using UV–Vis spectroscopy and thermogravimetric analysis. The combination of analytical tools allowed the study on the effects of ZIF concentrations in water, cobalt doping levels, and amounts of ligands in water on the water stability of ZIF samples. The effect of cobalt-doping was investigated by using ZIF particles with identical sizes (200–400 nm), in order to eliminate the effects of particle size on hydrolysis. Unlike other synthesis methods, a mechanochemical ball milling method allowed the production of nano-scale ZIF-8 particles with similar sizes, independent of cobalt-doping levels. The proposed combination of analytical tools including UV–Vis spectroscopy can be applied to the study of the water stability of other MOF materials.     

New stationary phases of conjugated π-electron systems for HPLC—characterization of structure and dynamics by solid state NMR spectroscopy

Four new stationary phases for HPLC were prepared by modifying silica gel with a trifrnctional aminoalkyl silane. A conjugated π-electron system was linked to the amino group either directly or with a carboxylic anhydride as a spacer in between. Characterization and dynamic measurements of the new stationary phases were performed by solid state NMR spectroscopy. The results of the ²⁹si and ¹³C CP/MAS techniques were compared with the recently developed ¹H MAS-only technique. Despite strong homonuclear dipole-dipole interactions it was possible to obtain well resolved ¹H MAS spectra of those stationaru phases with a high degree of crosslinking. Limited mobility of the aromatic ligand fragments is common for all examined stationaryu phases. The chromatographic properties of the new phases were tested by their ability tio sepatate a mixture of eight PAHS. It could be shown that the π-π interaction mechanism is responsible for the separation of the eight PAHs, because the elution order of the PAHs did not changem despite the use of both a nonpolar mobile phase (n-heptane) and a polar mobile phase (methanol/ water mixture).     

Solvent-Free Synthesis of Zeolitic Imidazolate Frameworks and the Catalytic Properties of Their Carbon Materials

Zeolitic imidazolate frameworks (ZIFs) are traditionally synthesized solvothermally by using cost- and waste-incurring organic solvents. Here, a direct synthesis method is reported for ZIF-8, ZIF-67, and their heterometallic versions from solid precursors only. This solvent-free crystallization method not only completely avoids organic solvents, but also provides an effective path for the synthesis of homogeneous mixed-metal ZIFs. Furthermore, under templating by NaCl/ZnCl₂ eutectic salt, carbonization of the ZIF materials gives rise to a series of N-containing high-surface-area carbon materials with impressive catalytic properties for the oxygen reduction reaction.     

Characterization of Zn‐Containing Metal–Organic Frameworks by Solid‐State 67Zn NMR Spectroscopy and Computational Modeling

Metal–organic frameworks (MOFs) are an extremely important class of porous materials with many applications. The metal centers in many important MOFs are zinc cations. However, their Zn environments have not been characterized directly by ⁶⁷Zn solid‐state NMR (SSNMR) spectroscopy. This is because ⁶⁷Zn (I=5/2) is unreceptive with many unfavorable NMR characteristics, leading to very low sensitivity. In this work, we report, for the first time, a ⁶⁷Zn natural abundance SSNMR spectroscopic study of several representative zeolitic imidazolate frameworks (ZIFs) and MOFs at an ultrahigh magnetic field of 21.1 T. Our work demonstrates that ⁶⁷Zn magic‐angle spinning (MAS) NMR spectra are highly sensitive to the local Zn environment and can differentiate non‐equivalent Zn sites. The ⁶⁷Zn NMR parameters can be predicted by theoretical calculations. Through the study of MOF‐5 desolvation, we show that with the aid of computational modeling, ⁶⁷Zn NMR spectroscopy can provide valuable structural information on the MOF systems with structures that are not well described. Using ZIF‐8 as an example, we further demonstrate that ⁶⁷Zn NMR spectroscopy is highly sensitive to the guest molecules present inside the cavities. Our work also shows that a combination of ⁶⁷Zn NMR data and molecular dynamics simulation can reveal detailed information on the distribution and the dynamics of the guest species. The present work establishes ⁶⁷Zn SSNMR spectroscopy as a new tool complementary to X‐ray diffraction for solving outstanding structural problems and for determining the structures of many new MOFs yet to come.     

Ammonolysis of 1,2‐Bis[dichloro(methyl)silyl]ethane. On the Structure of 1,3,6,8‐Tetramethyl‐2,7,11,12‐tetraaza‐1,3,6,8‐tetrasila‐tricyclo[6.2.1.13,6]‐dodecane

Ammonolysis of 1,2‐bis[dichloro(methyl)silyl]ethane afforded a crystalline tricyclic silazane along with polymeric material. The crystalline material could be isolated in pure state. It was analyzed by ¹H, ¹³C, ¹⁵N and ²⁹Si NMR spectroscopy in solution, by ¹³C, ¹⁵N and ²⁹Si MAS NMR spectroscopy in the solid state, as well as by single‐crystal and powder X‐ray diffraction. The title compound exists as a single isomer in solution, whereas in the solid state the presence of several modifications is indicated, in particular by the solid‐state MAS NMR spectra.     

NMR studies of carbon dioxide and methane self-diffusion in ZIF-8 at elevated gas pressures

Self-diffusion measurements with methane and carbon dioxide adsorbed in the Zeolitic Imidazolate Framework-8 (ZIF-8) were performed by ¹H and ¹³C pulsed field gradient nuclear magnetic resonance (PFG NMR). The experiments were conducted at 298 K and variable pressures of 7 to 15 bar in the gas phase above the ZIF-8 bed. Via known adsorption isotherms these pressures were converted to loadings of the adsorbed molecules. The self-diffusion coefficients of carbon dioxide measured by PFG NMR are found to be independent of loading. They are in good agreement with results from molecular dynamic (MD) simulations and resume the trend previously found by IR microscopy at lower loadings. Methane diffuses in ZIF-8 only slightly slower than carbon dioxide. Its experimentally obtained self-diffusion coefficients are about a factor of two smaller than the corresponding values determined by MD simulations using flexible frameworks.     

Zeolitic Imidazolate Frameworks: Synthesis,Functionalization, and Catalytic/Adsorption Applications

Zeolitic imidazolate frameworks (ZIFs) are comprised of transition metal ions (Zn, Co) and a range of imidazolate linkers in a tetrahedral coordination similar to that in crystalline aluminosilicate zeolites. The high surface area, tunable nanoporosity that can be subject to functionalization and the excellent thermal/chemical stability of ZIFs are attractive for heterogeneous catalysis and selective gas adsorption/separation. This review presents the current trends in synthesis, surface modification and catalytic reactions/adsorption of ZIF-based materials with particular emphasis on ZIF-8, which is the most widely studied structure among ZIFs.     

An Investigation into PEO/Crosslinked‐Silicone Semi‐Interpenetrating Polymer Network Using 1H Solid‐State NMR Spectroscopy under Fast MAS

Microstructure and phase behavior of a semi‐interpenetrating polymer network consisting of 10% poly(ethylene oxide) and 90% crosslinked‐silicone have been studied using various ¹H solid‐state NMR methods under fast magic angle spinning in combination with well‐known polymer characterization techniques. Both, ¹H double‐quantum MAS NMR spectroscopy as well as NOESY MAS measurements indicate a mixing of the two components on a molecular level.     

Selective Oxidative Dehydrogenation of Ethane and Propane over Copper-Containing Mordenite: Insights into Reaction Mechanism and Product Protection

Copper(II)-containing mordenite (CuMOR) is capable of activation of C−H bonds in C₁-C₃ alkanes, albeit there are remarkable differences between the functionalization of ethane and propane compared to methane. The reaction of ethane and propane with CuMOR results in the formation of ethylene and propylene, while the reaction of methane predominantly yields methanol and dimethyl ether. By combining in situ FTIR and MAS NMR spectroscopies as well as time-resolved Cu K-edge X-ray absorption spectroscopy, the reaction mechanism was derived, which differs significantly for each alkane. The formation of ethylene and propylene proceeds via oxidative dehydrogenation of the corresponding alkanes with selectivity above 95 % for ethane and above 85 % for propane. The formation of stable π-complexes of olefins with Cu^I sites, formed upon reduction of Cu^II-oxo species, protects olefins from further oxidation and/or oligomerization. This is different from methane, the activation of which proceeds via oxidative hydroxylation leading to the formation of surface methoxy species bonded to the zeolite framework. Our findings constitute one of the major steps in the direct conversion of alkanes to important commodities and open a novel research direction aiming at the selective synthesis of olefins.     

Synthesis and Optimization of Zeolitic Imidazolate Frameworks for the Oxygen Evolution Reaction

Metal–organic frameworks/zeolitic imidazolate frameworks (MOFs/ZIFs) and their post-synthesis modified nanostructures, such as oxides, hydroxides, and carbons have generated significant interest for electrocatalytic reactions. In this work, a high and durable oxygen evolution reaction (OER) performance directly from bimetallic Zn_100−xCo_x-ZIF samples is reported, without carrying out high-temperature calcination and/or carbonization. ZIFs can be reproducibly and readily synthesized in large scale at ambient conditions. The bimetallic ZIFs show a systematic and gradually improved OER activity with increasing cobalt concentration. A further increase in OER activity is evidenced in ZIF-67 polyhedrons with controlled particle size of <200 nm among samples of different sizes between 50 nm and 2 μm. Building on this, a significantly enhanced, >50 %, OER activity is obtained with ZIF-67/carbon black, which shows a low overpotential of approximately 320 mV in 1.0 m KOH electrolyte. Such activity is comparable to or better than numerous MOF/ZIF-derived electrocatalysts. The optimized ZIF-67 sample also exhibits increased activity and durability over 24 h, which is attributed to an in situ developed active cobalt oxide/oxyhydroxide related nanophase.     

Selective synthesis of ZIFs from zinc and nickel nitrate solution for photocatalytic H2O2 production

Hydrogen peroxide (H₂O₂) is one of the most promising, green, and effective oxidants that can be used in different applications. In this study, zeolitic imidazolate frameworks (ZIFs), consisting of organic ligands and metal sites, were selectively prepared from zinc or nickel nitrate solutions for use in photocatalytic H₂O₂ production. High concentrations of zinc nitrate solution provided more metal sites to coordinate with 2-methylimidazole, producing ZIF-8 with larger particle size, whereas low zinc nitrate concentrations resulted in more interconnected N–H⋯N hydrogen bonds, forming 2D-layered ZIF-L, with smaller particle size. Various concentrations of zinc and nickel nitrate solutions produced ZIFs that exhibited ZIF-8 or ZIF-L topology, with bandgap energies of 5.45 and 4.85 eV, respectively. These samples could serve as promising photocatalyst for the successful production of H₂O₂ under Xenon lamp irradiation.     

Comparative study of adsorbents performance in ethylene/ethane separation

Some potential adsorbents for ethylene/ethane separation are ethylene selective while the others are ethane selective. Among different adsorbents, i.e., zeolites and metal organic frameworks (MOFs), a comparative study is critical to find the more suitable adsorbent for the separation. In this paper, binary ethylene/ethane adsorption performances of zeolites and MOFs, i.e., equilibrium selectivities and adsorption capacities are investigated utilizing ideal adsorbed solution theory (IAST). IAST model is applied at different gas compositions (0.1–0.9 ethylene mole fractions) and pressures up to 100 kPa. The results revealed that the most selective adsorbent toward ethylene is 5A zeolite while MOFs have higher equilibrium adsorption capacities. Among zeolites and MOFs, 5A and Fe₂(dobdc) have the highest selectivity (27.4 and 13.6) and capacity (≈2.8 and 5.8 mmol ethylene/g) at 100 kPa and 298 K for a 50/50 mixture. Among ethane selective adsorbents, Silicalite-1 zeolite and UTSA-33a (MOF) have the highest selectivity and capacity (≈2.9 and ≈1.5 mmol ethane/g) at 100 kPa and 298 K for a 50/50 mixture, respectively. Investigation showed that adsorption capacity of ethylene selective adsorbents is higher than that of ethane selective ones.     

Multivariate sodalite zeolitic imidazolate frameworks: a direct solvent-free synthesis

Different mixed-ligand Zeolitic Imidazolate Frameworks (ZIFs) with sodalite topology, i.e. isoreticular to ZIF-8, unachievable by conventional synthetic routes, have been prepared using a solvent-free methodology. In particular, the versatility of this method is demonstrated with three different metal centres (Zn, Co and Fe) and binary combinations of three different ligands (2-methylimidazole, 2-ethylimidazole and 2-methylbenzimidazole). One combination of ligands, 2-ethylimidazole and 2-methylbenzimidazole, results in the formation of SOD frameworks for the three metal centres despite this topology not being obtained for the individual ligands. Theoretical calculations confirm that this topology is the lowest in energy upon ligand mixing.

Different mixed-ligand Zeolitic Imidazolate Frameworks (ZIFs) with sodalite topology, i.e. isoreticular to ZIF-8, unachievable by conventional synthetic routes, have been prepared using a solvent-free methodology.     

Ionic electro-active polymer actuator based on cobalt-containing nitrogen-doped carbon/conducting polymer soft electrode

Nanoscale cobalt-containing nitrogen-doped porous carbon (CoNC) materials were prepared by thermolysis of a zeolitic imidazolate framework (ZIF), ZIF-67, at different temperatures and their application for ionic electro-active polymer (EAP) actuator was evaluated. CoNC-700, which was obtained from ZIF-67 pyrolysis at 700 °C, exhibits specific surface area of 753.86 m² g⁻¹, pore volume of 0.5768 cm³ g⁻¹, and specific capacitance of 120.7 F∙g⁻¹. CoNC/conducting polymer soft electrode were fabricated by unitizing effective interaction of CoNC with poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS). High-performance ionic actuators were developed for the first time using this CoNC/PEDOT:PSS soft electrode. The developed ionic EAP actuator exhibited large peak-to-peak displacement of 20.4 mm and high bending strain of 0.28% (3 V and 0.1 Hz). Therefore, ZIFs or metal organic frameworks (MOFs) can be applied to provide significant improvements in EAP actuators, which can play key roles as technological advances toward bioinspired actuating devices required for next-generation soft and wearable electronics.     

Adsorptive Separation of Acetylene from Light Hydrocarbons by Mesoporous Iron Trimesate MIL‐100(Fe)

A reducible metal–organic framework (MOF), iron(III) trimesate, denoted as MIL‐100(Fe), was investigated for the separation and purification of methane/ethane/ethylene/acetylene and an acetylene/CO₂ mixtures by using sorption isotherms, breakthrough experiments, ideal adsorbed solution theory (IAST) calculations, and IR spectroscopic analysis. The MIL‐100(Fe) showed high adsorption selectivity not only for acetylene and ethylene over methane and ethane, but also for acetylene over CO₂. The separation and purification of acetylene over ethylene was also possible for MIL‐100(Fe) activated at 423 K. According to the data obtained from operando IR spectroscopy, the unsaturated Fe^III sites and surface OH groups are mainly responsible for the successful separation of the acetylene/ethylene mixture, whereas the unsaturated Fe^II sites have a detrimental effect on both separation and purification. The potential of MIL‐100(Fe) for the separation of a mixture of C₂H₂/CO₂ was also examined by using the IAST calculations and transient breakthrough simulations. Comparing the IAST selectivity calculations of C₂H₂/CO₂ for four MOFs selected from the literature, the selectivity with MIL‐100(Fe) was higher than those of CuBTC, ZJU‐60a, and PCP‐33, but lower than that of HOF‐3.     

Facile mechanosynthesis of amorphous zeolitic imidazolate frameworks

A fast and efficient mechanosynthesis (ball-milling) method of preparing amorphous zeolitic imidazolate frameworks (ZIFs) from different starting materials is discussed. Using X-ray total scattering, N(2) sorption analysis, and gas pycnometry, these frameworks are indistinguishable from one another and from temperature-amorphized ZIFs. Gas sorption analysis also confirms that they are nonporous once formed, in contrast to activated ZIF-4, which displays interesting gate-opening behavior. Nanoparticles of a prototypical nanoporous substituted ZIF, ZIF-8, were also prepared and shown to undergo amorphization.     

Visible light-driven BiOI/ZIF-8 heterostructure and photocatalytic adsorption synergistic degradation of BPA

A novel binary photocatalytic composite (BiOI/ZIF-8) was successfully constructed by solvothermal method. Its crystal morphology, chemical state of the elements and electrochemical properties were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, scanning electron microscopy, X-ray photoelectron spectroscopy and photoluminescence analysis. Appropriate ZIF-8 doping enhanced the separation and utilization of photogenerated electrons, promoted the capture of contaminants and rapidly produces active species, thereby accelerating the photocatalytic degradation of contaminants. Degradation experiments on BPA showed that the photocatalytic property of BiOI/ZIF-8 (0.5) was significantly improved compared with the parent material. BiOI/ZIF-8 (0.5) showed the highest reaction rate constant (0.06061 min^?1), 9.2 times that of BiOI (0.00659 min^?1) and 23.3 times that of ZIF-8 (0.0026 min^?1). In addition, five cycle tests showed that BiOI/ZIF-8 was highly efficient in recycling and stability. Through capture experiments, superoxide free radicals ·OH, h^? and ·O₂^? play an important role in degrading BPA, among which superoxide free radicals h⁺ play a major role.

     

‘Click’ Functionalization of Cryogels Conveniently Verified and Quantified Using High‐Resolution MAS NMR Spectroscopy

Chemical modification reactions of alkyne containing polyHEMA‐based macroporous network structures (cryogels) by Cu(I) catalyzed azide‐alkyne ‘click’ cycloaddition reactions and their monitoring and quantification with high‐resolution magic angle spinning (hr‐MAS) NMR spectroscopy are reported. Complete conversion is obtained when benzylazide is reacted with the grafted alkyne function, but only partial conversion is observed when using azide‐modified poly(ethylene glycol) (PEG‐N₃). Subsequent addition of benzylazide consumes all remaining alkyne groups. All chemical modifications are easily monitored at each stage using hr‐MAS NMR spectroscopy. The alkyne functionality and the resulting triazole ring provide well resolved ¹H resonances to monitor and quantify the progress of such ‘click’ reactions in general.

     

Framework Effects on Activation and Functionalisation of Methane in Zinc-Exchanged Zeolites

The first selective oxidation of methane to methanol is reported herein for zinc-exchanged MOR (Zn/MOR). Under identical conditions, Zn/FER and Zn/ZSM-5 both form zinc formate and methanol. Selective methane activation to form [Zn-CH₃]⁺ species was confirmed by ¹³C MAS NMR spectroscopy for all three frameworks. The percentage of active zinc sites, measured through quantitative NMR spectroscopy studies, varied with the zeolite framework and was found to be ZSM-5 (5.7 %), MOR (1.2 %) and FER (0.5 %). For Zn/MOR, two signals were observed in the ¹³C MAS NMR spectrum, resulting from two distinct [Zn-CH₃]⁺ species present in the 12 MR and 8 MR side pockets, as supported by additional NMR experiments. The observed products of oxidation of the [Zn-CH₃]⁺ species are shown to depend on the zeolite framework type and the oxidative conditions used. These results lay the foundation for developing structure–function correlations for methane conversion over zinc-exchanged zeolites.