Improving the balance of carrier mobilities of host-guest solid-state light-emitting electrochemical cells

We report efficient host-guest solid-state light-emitting electrochemical cells (LECs) utilizing a cationic terfluorene derivative as the host and a red-emitting cationic transition metal complex as the guest. Carrier trapping induced by the energy offset in the lowest unoccupied molecular orbital (LUMO) levels between the host and the guest impedes electron transport in the host-guest films and thus improves the balance of carrier mobilities of the host films intrinsically exhibiting electron preferred transporting characteristics. Photoluminescence measurements show efficient energy transfer in this host-guest system and thus ensure predominant guest emission at low guest concentrations, rendering significantly reduced self-quenching of guest molecules. EL measurements show that the peak EQE (power efficiency) of the host-guest LECs reaches 3.62% (7.36 lm W(-1)), which approaches the upper limit that one would expect from the photoluminescence quantum yield of the emissive layer (～0.2) and an optical out-coupling efficiency of ～20% and consequently indicates superior balance of carrier mobilities in such a host-guest emissive layer. These results are among the highest reported for red-emitting LECs and thus confirm that in addition to reducing self-quenching of guest molecules, the strategy of utilizing a carrier transporting host doped with a proper carrier trapping guest would improve balance of carrier mobilities in the host-guest emissive layer, offering an effective approach for optimizing device efficiencies of LECs.     

Hybrid White-Light-Emitting Electrochemical Cells Based on a Blue Cationic Iridium(III) Complex and Red Quantum Dots

Solid-state white light-emitting electrochemical cells (LECs) show promising advantages of simple solution fabrication processes, low operation voltage, and compatibility with air-stable cathode metals, which are required for lighting applications. To date, white LECs based on ionic transition metal complexes (iTMCs) have shown higher device efficiencies than white LECs employing other types of materials. However, lower emission efficiencies of red iTMCs limit further improvement in device performance. As an alternative, efficient red CdZnSeS/ZnS core/shell quantum dots were integrated with a blue iTMC to form a hybrid white LEC in this work. By achieving good carrier balance in an appropriate device architecture, a peak external quantum efficiency and power efficiency of 11.2 % and 15.1 lm W⁻¹, respectively, were reached. Such device efficiency is indeed higher than those of the reported white LECs based on host–guest iTMCs. Time- and voltage-dependent electroluminescence (EL) characteristics of the hybrid white LECs were studied by means of the temporal evolution of the emission-zone position extracted by fitting the simulated and measured EL spectra. The working principle of the hybrid white LECs was clarified, and the high device efficiency makes potential new white-emitting devices suitable for solid-state lighting technology possible.     

Tailoring carrier injection efficiency to improve the carrier balance of solid-state light-emitting electrochemical cells

We study the influence of the carrier injection efficiency on the performance of light-emitting electrochemical cells (LECs) based on a hole-preferred transporting cationic transition metal complex (CTMC) [Ir(dfppz)(2)(dtb-bpy)](+)(PF(6)(-)) (complex 1) and an electron-preferred transporting CTMC [Ir(ppy)(2)(dasb)](+)(PF(6)(-)) (complex 2) (where dfppz is 1-(2,4-difluorophenyl) pyrazole, dtb-bpy is 4,4'-di(tert-butyl)-2,2'-bipyridine, ppy is 2-phenylpyridine and dasb is 4,5-diaza-9,9'-spirobifluorene). Experimental results show that even with electrochemically doped layers, the ohmic contacts for carrier injection could be formed only when the carrier injection barriers were relatively low. Thus, adding carrier injection layers in LECs with relatively high carrier injection barriers would affect carrier balance and thus would result in altered device efficiency. Comparison of the device characteristics of LECs based on complex 1 and 2 in various device structures suggests that the carrier injection efficiency of CTMC-based LECs should be modified according to the carrier transporting characteristics of CTMCs to optimize device efficiency. Hole-preferred transporting CTMCs should be combined with an LEC structure with a relatively high electron injection efficiency, while a relatively high hole injection efficiency would be required for LECs based on electron-preferred transporting CTMCs. Since the tailored carrier injection efficiency compensates for the unbalanced carrier transporting properties of the emissive layer, the carrier recombination zone would be located near the center of the emissive layer and exciton quenching near the electrodes would be significantly mitigated, rendering an improved device efficiency approaching the upper limit expected from the photoluminescence quantum yield of the emissive layer and the optical outcoupling efficiency from a typical layered light-emitting device structure.     

Single-emissive-layer all-perovskite white light-emitting diodes employing segregated mixed halide perovskite crystals

Metal halide perovskites have demonstrated impressive properties for achieving efficient monochromatic light-emitting diodes. However, the development of white perovskite light-emitting diodes (PeLEDs) remains a big challenge. Here, we demonstrate a single-emissive-layer all-perovskite white PeLED using a mixed halide perovskite film as the emissive layer. The perovskite film consists of separated mixed halide perovskite phases with blue and red emissions, which are beneficial for suppressing halide anion exchange and preventing charge transfer. As a result, the white PeLED shows balanced white light emission with Commission Internationale de L''Eclairage coordinates of (0.33, 0.33). In addition, we find that the achievement of white light emission from mixed halide perovskites strongly depends on effective modulation of the halide salt precursors, especially lead bromide and benzamidine hydrochloride in our case. Our work provides very useful guidelines for realizing single-emissive-layer all-perovskite white PeLEDs based on mixed halide perovskites, which will spur the development of high-performance white PeLEDs.

We demonstrated a single-emissive-layer all-perovskite white light-emitting diode based on a mixed halide perovskite film.     

Dynamic doping and degradation in sandwich-type light-emitting electrochemical cells

Photoluminescence spectroscopy has been performed in situ during device operation and after switch-off on ionic transition metal complex (iTMC)-based sandwich-type light-emitting electrochemical cells (LECs). It is demonstrated that the photoluminescence of the LECs decreases with increasing operating time. For operating times up to three hours the decline in photoluminescence is fully recoverable after switching off the bias. These results imply that doping of the iTMC layer is responsible, not only, for the turn-on of LECs but also for their lifetimes.     

Halide Perovskite Single Crystals and Nanocrystal Films as Electron Donor-Acceptor Heterojunctions

Halide perovskites are materials for future optical displays and solar cells. Electron donor-acceptor perovskite heterostructures with distinguishing halide compositions are promising for transporting and harvesting photogenerated charge carriers. Combined e-beam lithography and anion exchange are promising to develop such heterostructures but challenging to prepare multiple heterojunctions at desired locations in single crystals. We demonstrate swift laser trapping-assisted band gap engineering at the desired locations in MAPbBr₃ microrods, microplates, or nanocrystal thin films. The built-in donor-acceptor double and multi-heterojunction structures let us transport and trap photogenerated charge carriers from wide-band gap bromide to narrow-band gap iodide domains. We discuss the charge carrier transport and trapping mechanisms from the viewpoints of engineered bands and band continuity. This work offers a convenient method for designing single-, double- and multi-heterojunction donor-acceptor halide perovskites for photovoltaic, photonic, and electronic applications.     

High‐Performance Perovskite Light‐Emitting Diode with Enhanced Operational Stability Using Lithium Halide Passivation

Defect passivation has been demonstrated to be effective in improving the radiative recombination of charge carriers in perovskites, and consequently, the device performance of the resultant perovskite light‐emitting diodes (LEDs). State‐of‐the‐art useful passivation agents in perovskite LEDs are mostly organic chelating molecules that, however, simultaneously sacrifice the charge‐transport properties and thermal stability of the resultant perovskite emissive layers, thereby deteriorating performance, and especially the operational stability of the devices. We demonstrate that lithium halides can efficiently passivate the defects generated by halide vacancies and reduce trap state density, thereby suppressing ion migration in perovskite films. Efficient green perovskite LEDs based on all‐inorganic CsPbBr₃ perovskite with a peak external quantum efficiency of 16.2 %, as well as a high maximum brightness of 50 270 cd m^?2, are achieved. Moreover, the device shows decent stability even under a brightness of 10⁴ cd m^?2. We highlight the universal applicability of defect passivation using lithium halides, which enabled us to improve the efficiency of blue and red perovskite LEDs.     

Cationic IrIII Emitters with Near-Infrared Emission Beyond 800 nm and Their Use in Light-Emitting Electrochemical Cells

Solid-state near-infrared (NIR) light-emitting devices have recently received considerable attention as NIR light sources that can penetrate deep into human tissue and are suitable for bioimaging and labeling. In addition, solid-state NIR light-emitting electrochemical cells (LECs) have shown several promising advantages over NIR organic light-emitting devices (OLEDs). However, among the reported NIR LECs based on ionic transition-metal complexes (iTMCs), there is currently no iridium-based LEC that displays NIR electroluminescence (EL) peaks near to or above 800 nm. In this report we demonstrate a simple method for adjusting the energy gap between the highest-occupied molecular orbital (HOMO) and the lowest-unoccupied molecular orbital (LUMO) of iridium-based iTMCs to generate NIR emission. We describe a series of novel ionic iridium complexes with very small energy gaps, namely NIR1 – NIR6 , in which 2,3-diphenylbenzo[g]quinoxaline moieties mainly take charge of the HOMO energy levels and 2,2′-biquinoline, 2-(quinolin-2-yl)quinazoline, and 2,2′-bibenzo[d]thiazole moieties mainly control the LUMO energy levels. All the complexes exhibited NIR phosphorescence, with emission maxima up to 850 nm, and have been applied as components in LECs, showing a maximum external quantum efficiency (EQE) of 0.05 % in the EL devices. By using a host–guest emissive system, with the iridium complex RED as the host and the complex NIR3 or NIR6 as guest, the highest EQE of the LECs can be further enhanced to above 0.1 %.     

提升基于钙钛矿的叠层太阳能电池稳定性的策略

近年来,基于有机无机金属卤化物钙钛矿的叠层太阳能电池引起了巨大的研究热潮。但是,不稳定性限制了其商业化。适用于顶部子电池的宽带隙钙钛矿存在相不稳定性,而适用于底部子电池的窄带隙钙钛矿存在空气不稳定性。首先,我们总结了提升基于钙钛矿的叠层太阳能电池稳定性的最新进展。然后,我们系统地分析了导致宽带隙钙钛矿的相不稳定性和窄带隙钙钛矿的空气不稳定性的原因,并为解决这些不稳定性问题总结了合理的策略。我们也简短地总结了中间层带来的不稳定性以及相应的解决措施。最后,我们回顾了钙钛矿材料固有的本征不稳定性和相应的改进方法,这对于将来发展更稳定的叠层太阳能电池中是必要的。我们认为随着对钙钛矿子电池的理解越来越深入,基于钙钛矿的叠层电池特别是钙钛矿/硅叠层电池将会迅速商业化。     

A Chiral Reduced-Dimension Perovskite for an Efficient Flexible Circularly Polarized Light Photodetector

Chiral quasi-2D perovskite single crystals (SCs) were investigated for their circular polarized light (CPL) detecting capability. Quasi-2D chiral perovskites, [(R)-β-MPA]₂MAPb₂I₇ ((R)-β-MPA=(R)-(+)-β-methylphenethylamine, MA=methylammonium), have intrinsic chirality and the capability to distinguish different polarization states of CPL photons. Corresponding quasi-2D SCs CPL photodetector exhibit excellent detection performance. In particular, our device responsivity is almost one order of magnitude higher than the reported 2D perovskite CPL detectors to date. The crystallization dynamics of the film were modulated to facilitate its carrier transport. Parallel oriented perovskite films with a homogeneous energy landscape is crucial to maximize the carrier collection efficiency. The photodetector also exhibits superior mechanical flexibility and durability, representing a promising candidate for sensitive and robust CPL photodetectors.     

A Chiral Reduced‐Dimension Perovskite for an Efficient Flexible Circularly Polarized Light Photodetector

Chiral quasi‐2D perovskite single crystals (SCs) were investigated for their circular polarized light (CPL) detecting capability. Quasi‐2D chiral perovskites, [(R)‐β‐MPA]₂MAPb₂I₇ ((R)‐β‐MPA=(R)‐(+)‐β‐methylphenethylamine, MA=methylammonium), have intrinsic chirality and the capability to distinguish different polarization states of CPL photons. Corresponding quasi‐2D SCs CPL photodetector exhibit excellent detection performance. In particular, our device responsivity is almost one order of magnitude higher than the reported 2D perovskite CPL detectors to date. The crystallization dynamics of the film were modulated to facilitate its carrier transport. Parallel oriented perovskite films with a homogeneous energy landscape is crucial to maximize the carrier collection efficiency. The photodetector also exhibits superior mechanical flexibility and durability, representing a promising candidate for sensitive and robust CPL photodetectors.     

Accelerated Interfacial Charge Transfer in Br-Gradient MAPbI3-xBrx Perovskite Thin Films?

Mixed halide perovskites (MHPs) are a class of semiconductor materials with great promise for many optoelectronic applications due to their outstanding photophysical properties. Understanding and tailoring the photogenerated carrier dynamics is essential for further improvement of perovskite performance. Herein, we report a study about the carrier transport and interfacial charge transfer dynamics in Br-gradient MAPbI_3-xBr_x perovskite thin films prepared by surface ion-exchange method. Driven by the bandgap gradient in MAPbI_3-xBr_x films, the accelerated internal hole transport and enhanced interfacial extraction efficiency were both observed. Meanwhile, the interfacial electron transfer was also found to be evidently facilitated due to the surface modification during post-treatment. Our findings suggest the possibility of simultaneous acceleration of interfacial electron and hole transfer processes in halide perovskite films via surface post-treatment technique, which is of great importance in further improving the power conversion efficiency of perovskite solar cells.     

钙钛矿同质结太阳电池研究进展

钙钛矿太阳电池制备工艺简单,效率提升迅速,被认为是最具应用潜力的新一代光伏技术之一。近年来,大量研究表明,钙钛矿光电材料可以通过自掺杂或外源掺杂的方式实现薄膜导电类型(p型或n型)的定向调控;而具有双层薄膜结构的钙钛矿p-n同质结可以通过薄膜双沉积技术制备,这为钙钛矿同质结太阳电池的设计与制备提供了技术基础。新型钙钛矿同质结太阳电池摒弃传统的电子传输层和空穴传输层,可简化电池结构,不仅有利于提升电池工作稳定性,降低成本,更能进一步释放钙钛矿太阳电池在柔性和半透明应用中的潜力,推动钙钛矿电池的实用化进程。本文围绕钙钛矿同质结太阳电池,综述了钙钛矿光电材料p/n特性掺杂和钙钛矿同质结的研究进展,讨论了钙钛矿同质结太阳电池的基本结构和工作原理,并对其当前存在的技术问题和应用前景进行了总结与展望。     

Electroluminescence performances of 1,1-bis(4-(N,N-dimethylamino)phenyl)-2,3,4,5-tetraphenylsilole based polymers in three cathode architectures

A new silole monomer with two 4-(N,N-dimethylamino)phenyl substitutions on silicon atom as designed and synthesized.Three copolymers PF-N-HPS1,PF-N-HPS10 and PF-N-HPS20 were then obtained by copolymerizations of 2,7-fluorene derivatives with the silole monomer at feed ratios of 1%,10%,and 20%.Their UV-vis absorption,electrochemical,photoluminescent,and electroluminescent (EL) properties were investigated.PF-N-HPS possessed HOMO levels of 5.25-5.58 eV,and showed green emissions.Using PF-N-HPS as the emissive layer,three different polymer light-emitting diodes were fabricated as device A with ITO/PEDOT/PF-N-HPS/Al,device B with ITO/PEDOT/PF-N-HPS/Ba/Al,and device C with ITO/PEDOT/PF-N-HPS/TPBI/Ba/Al.For the device A,PF-N-HPS only showed very low EL efficiency of 0.06-0.33 cd/A,indicating that the Al cathode could not inject electron efficiently to the emissive polymers containing the 4-(N,N-dimethylamino)phenyl groups.For the device B,low work function Ba supplied better electron injections,and the EL efficiency could be improved to 0.85-1.44 cd/A.TPBI with a deep HOMO level of 6.2 eV could enhance electron transport and hole blocking.Thus modified recombinations and largely elevated EL efficiency of 4.56-7.96 cd/A were achieved for the device C.The separation of the emissive layer and metal cathode with the TPBI layer may also suppress exciton quenching at the cathode interface.     

甲胺基-甲脒基混合钙钛矿的第一性原理研究

有机铅卤钙钛矿APbX_3的稳定性是制约其应用的重要因素,对APbX_3钙钛矿中A和X采用不同种类离子混合的化学组分调控是改进其稳定性最有效的方式之一。其中,A位点采用不同比例的甲脒离子(FA)和甲胺离子(MA)是当前研究的热点方向。本文通过第一性原理计算,系统研究了FA_(1-x)MA_xPbI_3体系的结构和光电性质。研究发现FA与MA的混合增加体系的稳定性,其中FA_(0.5)MA_(0.5)PbI_3最稳定。通过分析不同混合比例的结构,揭示了晶格常数随x的增加线性减小;以及带隙随x减小而线性增加。此外,计算结果发现MA所占比例增加时吸收光谱蓝移。研究表明通过FA和MA离子的混合能有效调控钙钛矿的光电性质,从而获得更有效的钙钛矿太阳能电池。     

Retardation of Trap-Assisted Recombination in Lead Halide Perovskite Solar Cells by a Dimethylbiguanide Anchor Layer

Reaching the full potential of solar cells based on photo-absorbers of organic-inorganic hybrid perovskites requires highly efficient charge extraction at the interface between perovskite and charge transporting layer. This demand is generally challenged by the presence of under-coordinated metal or halogen ions, causing surface charge trapping and resultant recombination losses. These problems can be tackled by introducing a small molecule interfacial anchor layer based on dimethylbiguanide (DMBG). Benefitting from interactions between the nitrogen-containing functional groups in DMBG and unsaturated ions in CH₃NH₃PbI₃ perovskites, the electron extraction of TiO₂ is dramatically improved in association with reduced Schottky–Read–Hall recombination, as revealed by photoluminescence spectroscopy. As a consequence, the power conversion efficiency of CH₃NH₃PbI₃ solar cells is boosted from 17.14 to 19.1 %, showing appreciably reduced hysteresis. The demonstrated molecular strategy based on DMBG enables one to achieve meliorations on key figures of merit in halide perovskite solar cells with improved stability.     

Engineering of CH3NH3PbI3 Perovskite Crystals by Alloying Large Organic Cations for Enhanced Thermal Stability and Transport Properties

The number of studies on organic–inorganic hybrid perovskites has soared in recent years. However, the majority of hybrid perovskites under investigation are based on a limited number of organic cations of suitable sizes, such as methylammonium and formamidinium. These small cations easily fit into the perovskite's three‐dimensional (3D) lead halide framework to produce semiconductors with excellent charge transport properties. Until now, larger cations, such as ethylammonium, have been found to form 2D crystals with lead halide. Here we show for the first time that ethylammonium can in fact be incorporated coordinately with methylammonium in the lattice of a 3D perovskite thanks to a balance of opposite lattice distortion strains. This inclusion results in higher crystal symmetry, improved material stability, and markedly enhanced charge carrier lifetime. This crystal engineering strategy of balancing opposite lattice distortion effects vastly increases the number of potential choices of organic cations for 3D perovskites, opening up new degrees of freedom to tailor their optoelectronic and environmental properties.     

含1,1-二（4-（N,N-二甲基胺基）苯基）-2,3,4,5-四苯基噻咯的聚合物在三种阴极结构中的电致发光性能

设计合成了一种1,1-位为二（4-（N,N-二甲基胺基）苯基的新型噻咯单体,并与2,7-芴单体聚合得到六苯基噻咯单体投料量为1%、10%、20%的三种共聚物PF-N-HPS1～20.研究了这些共聚物的紫外吸收光谱、电化学性质、光致发光光谱和电致发光性能.PF-N-HPS的HOMO能级为5.25～5.58eV,呈现绿光发射.以PF-N-HPS为发光层,制作了三种聚合物发光二极管（器件结构A：ITO/PEDOT/PF-N-HPS/Al;器件结构B：ITO/PEDOT/PF-N-HPS/Ba/Al;器件结构C：ITO/PEDOT/PF-N-HPS/TPBI/Ba/Al）.其中器件结构A的电致发光效率仅为0.1～0.33cd/A,说明PF-N-HPS中的4-（N,N-二甲基胺基）苯基结构不能使单独的Al阴极实现良好的电子注入.采用了低功函金属Ba阴极的器件结构B能改善电子的注入,使电致发光效率提高到0.85～1.44cd/A.器件结构C采用TPBI（HOMO：6.2eV）作为电子传输和空穴阻挡层,促进了电子和空穴的有效复合,进一步提高了电致发光效率（4.56～7.96cd/A）,其中TPBI层将噻咯聚合物与金属阴极隔离可能减少发光层在阴极界面处的激子猝灭也起到了一定的作用,器件结构C较器件结构B还获得了更好的绿光光谱.     

Dual-Interface Engineering in Perovskite Solar Cells with 2D Carbides

Passivating the interfaces between the perovskite and charge transport layers is crucial for enhancing the power conversion efficiency (PCE) and stability in perovskite solar cells (PSCs). Here we report a dual-interface engineering approach to improving the performance of FA_0.85MA_0.15Pb(I_0.95Br_0.05)₃-based PSCs by incorporating Ti₃C₂Cl_x Nano-MXene and o-TB-GDY nanographdiyne (NanoGDY) into the electron transport layer (ETL)/perovskite and perovskite/ hole transport layer (HTL) interfaces, respectively. The dual-interface passivation simultaneously suppresses non-radiative recombination and promotes carrier extraction by forming the Pb−Cl chemical bond and strong coordination of π-electron conjugation with undercoordinated Pb defects. The resulting perovskite film has an ultralong carrier lifetime exceeding 10 μs and an enlarged crystal size exceeding 2.5 μm. A maximum PCE of 24.86 % is realized, with an open-circuit voltage of 1.20 V. Unencapsulated cells retain 92 % of their initial efficiency after 1464 hours in ambient air and 80 % after 1002 hours of thermal stability test at 85 °C.     

Experimental and Theoretical Investigation of the Structural and Opto-electronic Properties of Fe-Doped Lead-Free Cs2AgBiCl6 Double Perovskite

Lead-free double perovskites have emerged as stable and non-toxic alternatives to Pb-halide perovskites. Herein, the synthesis of Fe-doped Cs₂AgBiCl₆ lead-free double perovskites are reported that display blue emission using an antisolvent method. The crystal structure, morphology, optical properties, band structure, and stability of the Fe-doped double perovskites were investigated systematically. Formation of the Fe-doped Cs₂AgBiCl₆ double perovskite is confirmed by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analysis. XRD and thermo-gravimetric analysis (TGA) shows that the Cs₂AgBiCl₆ double perovskite has high structural and thermal stability, respectively. Field emission scanning electron microscopy (FE-SEM) analysis revealed the formation of dipyramidal shape Cs₂AgBiCl₆ crystals. Furthermore, energy-dispersive X-ray spectroscopy (EDS) mapping shows the overlapping of Cs, Bi, Ag, Fe, and Cl elements and homogenous incorporation of Fe in Cs₂AgBiCl₆ double perovskite. The Fe-doped Cs₂AgBiCl₆ double perovskite shows a strong absorption at 380 nm. It extends up to 700 nm, suggesting that sub-band gap states transition may originate from the surface defect of the doped perovskite material. The radiative kinetics of the crystals was studied using the time-correlated single-photon counting (TCSPC) technique. Lattice parameters and band gap value of the Fe-doped Cs₂AgBiCl₆ double perovskites predicted by the density functional theory (DFT) calculations are confirmed by XRD and UV/Visible spectroscopy analysis. Time-dependent photo-response characteristics of the Fe-doped Cs₂AgBiCl₆ double perovskite show fast response and recovery time of charge carriers. We believe that the successful incorporation of Fe in lead-free, environmentally friendly Cs₂AgBiCl₆ double perovskite can open a new class of doped double perovskites with significant potential optoelectronics devices fabrication and photocatalytic applications.