Synthesis of molybdenum nitrido complexes for triple-bond metathesis of alkynes and nitriles

Complexes of the type N≡Mo(OR)(3) (R = tertiary alkyl, tertiary silyl, bulky aryl) have been synthesized in the search for molybdenum-based nitrile-alkyne cross-metathesis (NACM) catalysts. Protonolysis of known N≡Mo(NMe(2))(3) led to the formation of N≡Mo(O-2,6-(i)Pr(2)C(6)H(3))(3)(NHMe(2)) (12), N≡Mo(OSiPh(3))(3)(NHMe(2)) (5-NHMe(2)), and N≡Mo(OCPh(2)Me)(3)(NHMe(2)) (17-NHMe(2)). The X-ray structure of 12 revealed an NHMe(2) ligand bound cis to the nitrido ligand, while 5-NHMe(2) possessed an NHMe(2) bound trans to the nitride ligand. Consequently, 17-NHMe(2) readily lost its amine ligand to form N≡Mo(OCPh(2)Me)(3) (17), while 12 and 5-NHMe(2) retained their amine ligands in solution. Starting from bulkier tris-anilide complexes, N≡Mo(N[R]Ar)(3) (R = isopropyl, tert-butyl; Ar = 3,5-dimethylphenyl) allowed for the formation of base-free complexes N≡Mo(OSiPh(3))(3) (5) and N≡Mo(OSiPh(2)(t)Bu)(3) (16). Achievement of a NACM cycle requires the nitride complex to react with alkynes to form alkylidyne complexes; therefore the alkyne cross-metathesis (ACM) activity of the complexes was tested. Complex 5 was found to be an efficient catalyst for the ACM of 1-phenyl-1-butyne at room temperature. Complexes 12 and 5-NHMe(2) were also active for ACM at 75 °C, while 17-NHMe(2) and 16 did not show ACM activity. Only 5 proved to be active for the NACM of anisonitrile, which is a reactive substrate in NACM catalyzed by tungsten. NACM with 5 required a reaction temperature of 180 °C in order to initiate the requisite alkylidyne-to-nitride conversion, with slightly more than two turnovers achieved prior to catalyst deactivation. Known molybdenum nitrido complexes were screened for NACM activity under similar conditions, and only N≡Mo(OSiPh(3))(3)(py) (5-py) displayed any trace of NACM activity.     

Molybdenum Alkylidyne Complexes with Tripodal Silanolate Ligands: The Next Generation of Alkyne Metathesis Catalysts

A new type of molybdenum alkylidyne catalysts for alkyne metathesis is described, which is distinguished by an unconventional podand topology. These structurally well‐defined complexes are easy to make on scale and proved to be tolerant toward numerous functional groups; even certain protic substituents were found to be compatible. The new catalysts were characterized by X‐ray crystallography and by spectroscopic means, including ⁹⁵Mo NMR.     

Optimized synthesis, structural investigations, ligand tuning and synthetic evaluation of silyloxy-based alkyne metathesis catalysts

Nitride- and alkylidyne complexes of molybdenum endowed with triarylsilanolate ligands are excellent (pre)catalysts for alkyne-metathesis reactions of all sorts, since they combine high activity with an outstanding tolerance toward polar and/or sensitive functional groups. Structural and reactivity data suggest that this promising application profile results from a favorable match between the characteristics of the high-valent molybdenum center and the electronic and steric features of the chosen Ar(3) SiO groups. This interplay ensures a well-balanced level of Lewis acidity at the central atom, which is critical for high activity. Moreover, the bulky silanolates, while disfavoring bimolecular decomposition of the operative alkylidyne unit, do not obstruct substrate binding. In addition, Ar(3) SiO groups have the advantage that they are more stable within the coordination sphere of a high-valent molybdenum center than tert-alkoxides, which commonly served as ancillary ligands in previous generations of alkyne metathesis catalysts. From a practical point of view it is important to note that complexes of the general type [(Ar(3) SiO)(3) Mo?X] (X = N, CR; R = aryl, alkyl, Ar = aryl) can be rendered air-stable with the aid of 1,10-phenanthroline, 2,2'-bipyridine or derivatives thereof. Although the resulting adducts are themselves catalytically inert, treatment with Lewis acidic additives such as ZnCl(2) or MnCl(2) removes the stabilizing N-donor ligand and gently releases the catalytically active template into the solution. This procedure gives excellent results in alkyne metathesis starting from air-stable and hence user-friendly precursor complexes. The thermal and hydrolytic stability of representative molybdenum alkylidyne and -nitride complexes of this series was investigated and the structure of several decomposition products elucidated.     

DFT calculations of d0 M(NR)(CHtBu)(X)(Y) (M = Mo, W; R = CPh3, 2,6-iPr-C6H3; X and Y = CH2tBu, OtBu, OSi(OtBu)3) olefin metathesis catalysts: structural, spectroscopic and electronic properties

DFT(B3PW91) calculations have been carried out to rationalise the structural, electronic and spectroscopic properties of Mo and W imido M(NR1)(CHR2)(X)(Y) olefin metathesis catalysts by using either simplified or actual ligands of the experimental complexes. The calculated structures, energetics (preference for the syn isomer and alkylidene rotational barrier for the syn/anti interconversion), and spectroscopic properties (NMR J(C-H) coupling constants) are in good agreement with available experimental data. Additionally, the alkylidene nu(C-H) stretching frequencies, not available experimentally, have been calculated. These quasi-tetrahedral complexes have a linear imido group and a C-H alkylidene agostic interaction, which stabilizes the syn isomer. Whether looking at M(NR1)(CHR2)(X)(Y), M = Mo, W, or the isolobal Re complexes, Re(CR1)(CHR2)(X)(Y), a linear correlation is obtained between both the alkylidene nu(C-H) stretching frequencies and J(C-H) coupling constants with the calculated alkylidene C-H bond lengths. These correlations show that the strength of the alpha-C-H agostic interaction increases from alkylidyne Re to imido group 6 complexes and from Mo to W. The NBO and AIM Bader analyses show firstly that the imido and alkylidyne groups are both triply bonded to the metal, but that the triply bonded imido ligand is a weaker electron donor than the alkylidyne, hence the stronger alpha-C-H agostic interaction for group 6 imido complexes. Secondly, one of the pi bonds of the triply bonded ligand is weakened at the transition state of the alkylidene rotation: while no lone pair is formed, the metal-ligand triple bond is polarized. This is more favourable for an imido than for an alkylidyne ligand, hence the lower alkylidene rotational barrier for the former complexes. Conversely, the aryl imido is even less of an electron donor than the alkyl imido group, which in turn strengthens the alpha-C-H agostic interaction and lowers the alkylidene rotational barrier even more.     

Reversible Coordination of Dioxygen by Tripodal Tetraamine Copper Complexes Incorporated in a Porous Silica Framework

The present study reports the synthesis and rational design of porous structured materials by using a templating method. A tetraethoxysilylated tripodal tetraamine (TREN) was covalently incorporated in a silica framework with a double imprint: A surfactant template and a metal ion imprint. The presence of a cationic surfactant (CTAB) endowed the material with a high porosity, and the tripodal or square‐pyramidal topology of the ligand was preserved thanks to the use of the silylated Cu^II complex. After removal of the surfactant and de‐metalation, the incorporated tetraamine was quantitatively complexed by CuCl₂ and the material has shown after thermal activation that a reversible binding of O₂ on the metal ions occurred. This chemisorption process was monitored by UV/Vis and EPR spectroscopies, and the Cu:O₂ adduct was postulated to be an end‐on μ‐η¹:η¹‐peroxodicopper(II) complex bridged by a chloride ion. The Cu^I‐active species, formed during the activation step, were fully recovered during several O₂ binding cycles. The high reactivity of the copper complexes and the room‐temperature stability of the dioxygen adduct were explained by the fine adaptability of the tripodal ligand to different geometries, the confinement of the active sites in the hybrid silica that protect them from degradation by a control of the metal‐ion microenvironment, as well as the short‐range lamellar order of the copper complexes in the framework.     

Room temperature dehydrogenation of ethane to ethylene

The transient titanium alkylidyne, (PNP)Ti≡C(t)Bu (PNP = N[2-P(i)Pr(2)-4-methylphenyl](2)(-)), activates a C-H bond of ethane at room temperature, and a β-hydrogen of the resulting ethyl ligand is subsequently transferred to the adjacent alkylidene ligand to form an ethylene adduct of titanium. Treatment of the ethylene complex with two-electron oxidants such as organic azides results in extrusion of ethene concomitant with formation of a mononuclear titanium imido complex.     

Highly active trialkoxymolybdenum(VI) alkylidyne catalysts synthesized by a reductive recycle strategy

A systematic study of alkyne metathesis catalyzed by trialkoxymolybdenum(VI) alkylidyne complexes is reported, in which substrate functional groups, alkynyl substituents, and catalyst ligands are varied. Sterically hindered trisamidomolybdenum(VI) propylidyne complex 5 was prepared conveniently through a previously communicated reductive recycle strategy. Alcoholysis of 5 with various phenols/alcohols provides a set of active catalysts for alkyne metathesis at room temperature, among which the catalyst with p-nitrophenol as ligand shows the highest catalytic activity and is compatible with a variety of functional groups and solvents. A key finding that enabled the use of highly active molybdenum(VI) catalysts is replacement of the commonly used propynyl substituents on the starting alkyne substrates with butynyl groups. Under reduced pressure using 1,2,4-trichlorobenzene as an involatile solvent, the alkyne metathesis of butynyl substituted compounds proceeds well at 30 degrees C providing high yields (83%-97%) of dimers. Rationalization of the special role played by butynyl substrates is discussed.     

The Triple‐Bond Metathesis of Aryldiazonium Salts: A Prospect for Dinitrogen Cleavage

The {N₂} unit of aryldiazonium salts undergoes unusually facile triple‐bond metathesis on treatment with molybdenum or tungsten alkylidyne ate complexes endowed with triphenylsilanolate ligands. The reaction transforms the alkylidyne unit into a nitrile and the aryldiazonium entity into an imido ligand on the metal center, as unambiguously confirmed by X‐ray structure analysis of two representative examples. A tungsten nitride ate complex is shown to react analogously. Since the bonding situation of an aryldiazonium salt is similar to that of metal complexes with end‐on‐bound dinitrogen, in which {N₂}→M σ donation is dominant and electron back donation minimal, the metathesis described herein is thought to be a conceptually novel strategy toward dinitrogen cleavage devoid of any redox steps and, therefore, orthogonal to the established methods.     

Molybdenum Alkylidyne Silyloxy N-Heterocyclic Carbene Complexes – Highly Active Alkyne Metathesis Catalysts that can be Handled in Air

A series of molybdenum alkylidyne silyloxy N-heterocyclic carbene (NHC) complexes of the general formula [Mo(≡C(R))(OSiPh₃)₃(NHC)] (R=tBu, 4-methoxyphenyl, 2,4,6-trimethylphenyl; NHC = 1,3-diisopropylimidazol-2-ylidene, 1,3-dicyclohexylimidazol-2-ylidene, 1,3-dicyclohexyl-4,5-dihydroimidazol-2-ylidene, 1,3-dimethylimidazol-2-ylidene, 1,3-dimethyl-4,5-dichloroimidazol-2-ylidene) was synthesized. Single crystal X-ray analyses revealed that with increasing steric demand of the alkylidyne group, enhanced air-stability of the complexes in the solid-state is achieved with the most stable complex (R=2,4,6-trimethylphenyl, NHC = 1,3-diisopropylimidazol-2-ylidene) being stable in air for 24 h without showing signs of decomposition in ¹H NMR. In contrast to previously reported air-stable molybdenum-based complexes, the novel catalysts proved to be highly active in alkyne metathesis, allowing for turnover numbers (TONs) of up to 6000 without further activation, and tolerant towards several functional groups such as tosyl, ether, ester, thioether and nitro moieties. Their air stability allows for facile handling of the catalysts in air and even after exposure to ambient atmosphere for one week, the most stable representative still displayed high productivity in alkyne metathesis.     

Total Synthesis of Callyspongiolide,Part 2: The Ynoate Metathesis/cis-Reduction Strategy

The macrocyclic core of the cytotoxic marine natural product callyspongiolide ( 1 ) was forged by ring-closing alkyne metathesis (RCAM) of an ynoate precursor using a molybdenum alkylidyne complex endowed with triarylsilanolate ligands as the catalyst. This result is remarkable in view of the failed attempts documented in the literature at converting electron deficient alkynes with the aid of more classical catalysts. The subsequent Z-selective semi-reduction of the resulting cycloalkyne by hydrogenation over nickel boride required careful optimization in order to minimize overreduction and competing dehalogenation of the compound's alkenyl iodide terminus as needed for final attachment of the side chain of 1 by Sonogashira coupling. The required cyclization precursor itself was prepared via Kocienski olefination.     

183W NMR Spectroscopy Guides the Search for Tungsten Alkylidyne Catalysts for Alkyne Metathesis

Triarylsilanolates are privileged ancillary ligands for molybdenum alkylidyne catalysts for alkyne metathesis but lead to disappointing results and poor stability in the tungsten series. ¹H,¹⁸³W heteronuclear multiple bond correlation spectroscopy, exploiting a favorable ⁵J-coupling between the ¹⁸³W center and the peripheral protons on the alkylidyne cap, revealed that these ligands upregulate the Lewis acidity to an extent that the tungstenacyclobutadiene formed in the initial [2+2] cycloaddition step is over-stabilized and the catalytic turnover brought to a halt. Guided by the ¹⁸³W NMR shifts as a proxy for the Lewis acidity of the central atom and by an accompanying chemical shift tensor analysis of the alkylidyne unit, the ligand design was revisited and a more strongly π-donating all-alkoxide ligand prepared. The new expanded chelate complex has a tempered Lewis acidity and outperforms the classical Schrock catalyst, carrying monodentate tert-butoxy ligands, in terms of rate and functional-group compatibility.     

Sulfide Catalysts Supported on Al2O3: VI. Synthesis of Catalysts with the Use of Binuclear Molybdenum(V) Complexes with Sulfur-Containing Ligands

A new method was developed for the preparation of sulfide catalysts supported on aluminum oxide. The surface assembling of a direct precursor of the active component was used in this method. The method consists in the sequential immobilization of binuclear molybdenum complexes with S-containing ligands on the support surface followed by the immobilization of nickel (cobalt) compounds at the surface molybdenum complexes. The complexation and structure of the resulting complexes in solution and the structure of surface complexes were studied by ⁹⁵Mo and ¹⁷O NMR, IR, and EXAFS spectroscopy. The surface assembling of a direct precursor of the active component of sulfide hydrodesulfurization catalysts was demonstrated using IR and EXAFS spectroscopy. The activity of the resulting catalysts in a model reaction of thiophene hydrogenolysis was comparable to the activity of sulfide catalysts of the metal complex origin and was much higher than the activity of commercial catalysts and catalysts prepared by impregnation.     

Bifunctional aluminum porphyrin complex: Soil tolerant catalyst for copolymerization of 2 and propylene oxide

Due to the concern on residue toxic metal in biodegradable poly(propylene carbonate) (PPC), soil tolerant and heavy metal free aluminum complexes, that is, bifunctional aluminum porphyrin catalysts bearing quaternary ammonium salts on the ligand framework were prepared. Variation of the quaternary ammonium anion and the axial ligand had dramatic effects on the catalytic activity of resultant complex, among which complex 3b yielded perfectly alternative PPC with high molecular weight and relatively narrow polydispersity, and its TOF reached 3,407 h^?1 at [PO]/[cat.] ratio of 20,000 at 110 °C, although the PPC selectivity was 71%. By introducing specific substituent on the ligand framework, the electronic environment at the active center can be changed, among which complex 5b bearing tertiary butyl‐functionalized aryl substituents exhibited a TOF of 449 h^?1 at [PO]/[cat.] ratio of 5,000 at 70 °C, with PPC selectivity of 92% and number average molecular weight of 36 kg mol^?1. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2346–2355     

A Low‐Valent Molybdenum Nitride Complex: Reduction Promotes Carbonylation Chemistry

Toward nitrogen functionalization, reactive terminal transition metal nitrides with high d‐electron counts are of interest. A series of terminal Mo^IV nitride complexes were prepared within the context of exploring nitride/carbonyl coupling to cyanate. Reduction affords the first Mo^II nitrido complex, an early metal nitride with four valence d‐electrons. The binding mode of the para‐terphenyl diphosphine ancillary ligand changes to stabilize an electronic configuration with a high electron count and a formal M?N bond order of three. Even with an intact Mo≡N bond, this low‐valent nitrido complex proves to be highly reactive, readily undergoing N‐atom transfer upon addition of CO, releasing cyanate anion.     

Chalcogenidobis(ene-1,2-dithiolate)molybdenum(IV) complexes (chalcogenide E = O, S, Se): probing Mo≡E and ene-1,2-dithiolate substituent effects on geometric and electronic structure

New square-pyramidal bis(ene-1,2-dithiolate)MoSe complexes, [Mo(IV)Se(L)(2)](2-), have been synthesised along with their terminal sulfido analogues, [Mo(IV)S(L)(2)](2-), using alkyl (L(C(4)H(8))), phenyl (L(Ph)) and methyl carboxylate (L(COOMe)) substituted dithiolene ligands (L). These complexes now complete three sets of Mo(IV)O, Mo(IV)S and Mo(IV)Se species that are coordinated with identical ene-1,2-dithiolate ligands. The [alkyl substituted Mo(S/Se)(L(C(4)H(8)))(2)](2-) complexes were reported in prior investigations (H. Sugimoto, T. Sakurai, H. Miyake, K. Tanaka and H. Tsukube, Inorg. Chem. 2005, 44, 6927, H. Tano, R. Tajima, H. Miyake, S. Itoh and H. Sugimoto, Inorg. Chem. 2008, 47, 7465). The new series of complexes enable a systematic investigation of terminal chalcogenido and supporting ene-1,2-dithiolate ligand effects on geometric structure, electronic structure, and spectroscopic properties. X-ray crystallographic analysis of these (Et(4)N)(2)[MoEL(2)] (E = terminal chalocogenide) complexes reveals an isostructural Mo centre that adopts a distorted square pyramidal geometry. The M≡E bond distances observed in the crystal structures and the ν(M≡E) vibrational frequencies indicate that these bonds are weakened with an increase in L→Mo electron donation (L(COOMe) < L(Ph) < L(C(4)H(8))), and this order is confirmed by an electrochemical study of the complexes. The (77)Se NMR resonances in MoSeL complexes appear at lower magnetic fields as the selenido ion became less basic from MoSeL(C(4)H(8)), MoSeL(Ph) and MoSeL(COOMe). Electronic absorption and resonance Raman spectroscopies have been used to assign key ligand-field, MLCT, LMCT and intraligand CT bands in complexes that possess the L(COOMe) ligand. The presence of low-energy intraligand CT transition in these MoEL(COOMe) compounds directly probes the electron withdrawing nature of the -COOMe substituents, and this underscores the complex electronic structure of square pyramidal bis(ene-1,2-dithiolate)-Mo(IV) complexes that possess extended dithiolene conjugation.     

Bioinspired Copper(I) Complexes that Exhibit Monooxygenase and Catechol Dioxygenase Activity

New tripodal ligand L2 featuring three different pyridyl/imidazolyl‐based N‐donor units at a bridgehead C atom, from which one of the imidazolyl units is separated by a phenylene linker, was synthesized and investigated with regards to copper(I) complexation. The resulting complex [( L2 )Cu]OTf ( 2^OTf ), the known complex [( L1 )Cu]OTf ( 1^OTf ; L1 differs from L2 in that it lacks the phenylene spacer) and [( L3 )Cu]OTf ( 3^OTf ), prepared from a known chiral, tripodal, N‐donor ligand featuring pyridyl, pyrazolyl, and imidazolyl donors, were tested as catalysts for the oxidation of sodium 2,4‐di‐tert‐butylphenolate ( NaDTBP ) with O₂. Indeed, they mediated NaDTBP oxidation to give mainly the corresponding catecholate and quinone ( Q ). None of the complexes 1^OTf , 2^OTf , and 3^OTf is superior to the others, as yields were comparable and, if the presence of protons is guaranteed by concomitant addition of the phenol DTBP , the oxidation can also be performed catalytically. For all complexes stoichiometric oxidations under certain conditions (concentrated solutions, high NaDTBP content) were found to also generate products typical for metal‐mediated intradiol cleavage of the catecholate with O₂. As shown representatively for 1^OTf this dioxygenation sets in at a later stage of the reaction. Initially a copper species responsible for the monooxygenation must form from 1^OTf / NaDTBP /O₂, and only thereafter is the copper species responsible for dioxygenation formed and consumes Q as substrate. Hence, under these circumstances complexes 1^OTf – 3^OTf show both monooxygenase and catechol dioxygenase activity.     

Iron and cobalt salicylaldimine complexes as catalysts for epoxide and carbon dioxide coupling: effects of substituents on catalytic activity

The synthesis and characterization of substituted ONNO-donor salen-type Schiff base complexes of general formula [M^III(L)Cl] (L = Schiff base ligand, M = Fe, Co) is reported. The complexes have been applied as catalysts for the coupling of carbon dioxide and styrene oxide in the presence of tetrabutylammonium bromide as a co-catalyst. The reactions were carried out under relatively low-pressure and solvent-free conditions. The effects of the metal center, ligands, and various substituents on the peripheral sites of the ligand on the coupling reaction were investigated. The catalyst systems were found to be selective for the coupling of CO₂ and styrene oxide, resulting in cyclic styrene carbonate. The cobalt(III) complex with no substituents on the ligand showed higher activity (TON = 1297) than the corresponding iron(III) complex (TON = 814); however, the iron(III)-based catalysts bearing electron-withdrawing substituents on the salen ligands (NEt₃, TON = 1732) showed the highest catalytic activity under similar reaction conditions. The activity of one of the cobalt(III) complexes toward the coupling of 1-butene oxide, cyclohexene oxide and propylene oxide with CO₂ was evaluated, revealing a notable activity for the coupling of 1-butene oxide.     

Reactions of Alkynes with [RuCl(cyclopentadienyl)] Complexes: The Important First Steps

Cyclopentadienyl–ruthenium half‐sandwich complexes with η²‐bound alkyne ligands have been suggested as catalytic intermediates in the early stages of Ru‐catalyzed reactions with alkynes. We show that electronically unsaturated complexes of the formula [RuCl(Cp^)(η²‐RC≡CR′)] can be stabilized and crystallized by using the sterically demanding cyclopentadienyl ligand Cp^ (Cp^=η⁵‐1‐methoxy‐2,4‐tert‐butyl‐3‐neopentyl‐cyclopentadienyl). Furthermore we demonstrate that [RuCl₂(Cp^)]₂ is an active and regioselective catalyst for the [2+2+2] cyclotrimerization of alkynes. The first elementary steps of the reaction of mono(η²‐alkyne) complexes containing {RuCl(Cp*)} (Cp*=η⁵‐C₅Me₅) and {RuCl(Cp^)} fragments with alkynes were investigated by DFT calculations at the M06/6‐31G* level in combination with a continuum solvent model. Theoretical results are able to rationalize and complement the experimental findings. The presence of the sterically demanding Cp^ ligand increases the activation energy required for the formation of the corresponding di(η²‐alkyne) complexes, enhancing the initial regioselectivity, but avoiding the evolution of the system towards the expected cyclotrimerization product when bulky substituents are present. Theoretical results also show that the electronic structure and stability of a metallacyclic intermediate is strongly dependent on the nature of the substituents present in the alkyne.     

Heterobimetallic Cuprates Consisting of a Redox‐Switchable,Silicon‐Based Metalloligand: Synthesis,Structures, and Electronic Properties

A series of bimetallic silyl halido cuprates consisting of the new tripodal silicon‐based metalloligand [κ³N‐Si(3,5‐Me₂pz)₃Mo(CO)₃]^? is presented (pz=pyrazolyl). This metalloligand is straightforwardly accessible by reacting the ambidentate ligand tris(3,5‐dimethylpyrazolyl)silanide ({Si(3,5‐Me₂pz)₃}^?) with [Mo(CO)₃(η⁶‐toluene)]. The compound features a fac‐coordinated tripodal chelating ligand and an outward pointing, “free” pyramidal silyl donor, which is easily accessible for a secondary coordination to other metal centers. Several bimetallic silyl halido cuprates of the general formula [CuX{μ‐κ¹Si:κ³N‐Si(3,5‐Me₂pz)₃Mo(CO)₃}]^? (X=Cl, Br, I) have been synthesized. The electronic and structural properties of these complexes were probed in detail by X‐ray diffraction analysis, electrospray mass spectrometry, infrared‐induced multiphoton dissociation studies, cyclic voltammetry, spectroelectrochemistry, gas‐phase photoelectron spectroscopy, as well as UV/Vis and fluorescence spectroscopy. The heterobimetallic complexes contain linear two‐coordinate copper(I) entities with the shortest silicon–copper distances reported so far. Oxidation of the anionic complexes in methylene chloride and acetonitrile solutions at ${E{{0\hfill \atop 1/2\hfill}}}$ =?0.60 and ?0.44 V (vs. ferrocene/ferrocenium (Fc/Fc⁺)), respectively, shows substantial reversibility. Based on various results obtained from different characterization methods, as well as density functional theory calculations, these oxidation events were attributed to the Mo⁰/Mo^I redox couple.     

Ansa-tris(allyl) complexes of alkali metals: tripodal analogues of cyclopentadienyl and ansa-metallocene ligands

Alkali metal complexes of two types of ansa-tris(allyl) ligand are reported; a monoanionic ansa-tris(allyl) ligand containing tin(II) is formally valence isoelectronic to the cyclopentadienyl ligand and a trianionic ansa-tris(allyl) ligand containing silicon(IV) is formally valence isoelectronic to an ansa-metallocene ligand; the potential wider use of these tripodal ligands in coordination chemistry is discussed.