Assembly of Tetrazolylfuroxan Organic Salts: Multipurpose Green Energetic Materials with High Enthalpies of Formation and Excellent Detonation Performance

A series of highly energetic organic salts comprising a tetrazolylfuroxan anion, explosophoric azido or azo functionalities, and nitrogen-rich cations were synthesized by simple, efficient, and scalable chemical routes. These energetic materials were fully characterized by IR and multinuclear NMR (¹H, ¹³C, ¹⁴N, ¹⁵N) spectroscopy, elemental analysis, and differential scanning calorimetry (DSC). Additionally, the structure of an energetic salt consisting of an azidotetrazolylfuroxan anion and a 3,6,7-triamino-7H-[1,2,4]triazolo[4,3-b][1,2,4]triazolium cation was confirmed by single-crystal X-ray diffraction. The synthesized compounds exhibit good experimental densities (1.57–1.71 g cm⁻³), very high enthalpies of formation (818–1363 kJ mol⁻¹), and, as a result, excellent detonation performance (detonation velocities 7.54–8.26 kms⁻¹ and detonation pressures 23.4–29.3 GPa). Most of the synthesized energetic salts have moderate sensitivity toward impact and friction, which makes them promising candidates for a variety of energetic applications. At the same time, three compounds have impact sensitivity on the primary explosives level (1.5–2.7 J). These results along with high detonation parameters and high nitrogen contents (66.0–70.2 %) indicate that these three compounds may serve as potential environmentally friendly alternatives to lead-based primary explosives.     

Furazans with Azo Linkages: Stable CHNO Energetic Materials with High Densities,Highly Energetic Performance,and Low Impact and Friction Sensitivities

Various highly energetic azofurazan derivatives were synthesized by simple and efficient chemical routes. These nitrogen‐rich materials were fully characterized by FTIR spectroscopy, elemental analysis, multinuclear NMR spectroscopy, and high‐resolution mass spectrometry. Four of them were further confirmed structurally by single‐crystal X‐ray diffraction. These compounds exhibit high densities, ranging from 1.62 g cm^?3 up to a remarkably high 2.12 g cm^?3 for nitramine‐substituted azofurazan DDAzF ( 2 ), which is the highest yet reported for an azofurazan‐based CHNO energetic compound and is a consequence of the formation of strong intermolecular hydrogen‐bonding networks. From the heats of formation, calculated with Gaussian 09, and the experimentally determined densities, the energetic performances (detonation pressure and velocities) of the materials were ascertained with EXPLO5 v6.02. The results suggest that azofurazan derivatives exhibit excellent detonation properties (detonation pressures of 21.8–46.1 GPa and detonation velocities of 6602–10 114 m s^?1) and relatively low impact and friction sensitivities (6.0–80 J and 80–360 N, respectively). In particular, they have low electrostatic spark sensitivities (0.13–1.05 J). These properties, together with their high nitrogen contents, make them potential candidates as mechanically insensitive energetic materials with high‐explosive performance.     

Synthesis and Investigation of Advanced Energetic Materials Based on Bispyrazolylmethanes

Herein we present the preparation and characterization of three new bispyrazolyl‐based energetic compounds with great potential as explosive materials. The reaction of sodium 4‐amino‐3,5‐dinitropyrazolate ( 5 ) with dimethyl iodide yielded bis(4‐amino‐3,5‐dinitropyrazolyl)methane ( 6 ), which is a secondary explosive with high heat resistance (T_dec=310 °C). The oxidation of this compound afforded bis(3,4,5‐trinitropyrazolyl)methane ( 7 ), which is a combined nitrogen‐ and oxygen‐rich secondary explosive with very high theoretical and estimated experimental detonation performance (V_det (theor)=9304 m s^?1 versus V_det(exp)=9910 m s^?1) in the range of that of CL‐20. Also, the thermal stability (T_dec=205 °C) and sensitivities of 7 are auspicious. The reaction of 6 with in situ generated nitrous acid yielded the primary explosive bis(4‐diazo‐5‐nitro‐3‐oxopyrazolyl)methane ( 8 ), which showed superior properties to those of currently used diazodinitrophenol (DDNP).     

富氮唑类金属配合物的设计合成及应用

含能材料是一种特殊的能源材料,在国防和民用领域均具有特殊而重要的地位.富氮唑类合能金属配合物及其聚合物是含能材料的一个重要分支,它们在含能材料的起爆药、高能炸药、火箭推进剂和烟花等诸多领域均具有重要的研究价值和广阔的应用前景.本文从咪唑、吡唑、三唑、四唑和五唑等氮唑类含能金属配合物的理论设计、实验合成、性能评估和应用领...     

Nitro‐Substituted Bishomocubanes: Synthesis,Characterization, and Application as Energetic Materials

Several high‐energy‐density strained polycyclic compounds nitromethyl‐l,3‐bishomocubane (NMBHC), nitromethylene‐1,3‐bishomocubane (NMyBHC), and bis(nitromethyl)‐1,3‐bishomocubane (DNTMBHC), which were synthesized for the first time from bishomocubanone, hold potential for application as standalone fuels in liquid bipropellant systems or as additives in liquid and solid propellant formulations. DFT analysis at the B3LYP/6‐31G(d) level of theory was employed to optimize the geometries of the compounds and to determine their densities, heats of formation, and various thermodynamic properties. The density specific impulse, determined by using equilibrium thermodynamics, demonstrated an improvement of 75 s for NMBHC and NMyBHC over standard hydrocarbons. The specific impulse with ammonium perchlorate showed an improvement of 25–30 s over hydroxy‐terminated polybutadiene. Thermogravimetric analysis revealed that NMBHC, NMyBHC, and DNTMBHC evaporated readily with activation energies of 58.8, 69.2, and 74.5 kJ mol^?1, respectively.     

3-氨基-4-硝基氧化呋咱含能化合物的设计合成研究

在氧化呋咱环上引入氨基或硝基等功能基团,可提高含能化合物的能量密度和爆炸性能。为了获得更高能量密度的新型含能化合物,本文利用密度泛函理论（DFT）和单、双激发的耦合簇（CCSD）方法探索了以3-酰基叠氮基-4硝基氧化呋咱为起始材料,在二氧六环和水混合溶剂中合成3-氨基-4硝基氧化呋咱的反应机理,给出了反应的势能曲线。结果表明,该反应主要分为两个阶段：3-酰基叠氮基-4硝基氧化呋咱脱N₂后进行Curtious重排产生异氰酸酯;异氰酸酯经水解、羟基扭转、CO₂的脱离形成产物。反应的决速步为CO₂的脱离,能垒为44kcal/mol。因此,加热是实现该合成反应的必要条件。水既绿色环保,又参与反应,是该反应的最佳溶剂。这些结果为3-氨基-4-硝基氧化呋咱的实验合成提供了必要的理论依据。     

Energetic Salts Based on Tetrazole N‐Oxide

Energetic materials (explosives, propellants, and pyrotechnics) are used extensively for both civilian and military applications and the development of such materials, particularly in the case of energetic salts, is subject to continuous research efforts all over the world. This Review concerns recent advances in the syntheses, properties, and potential applications of ionic salts based on tetrazole N‐oxide. Most of these salts exhibit excellent characteristics and can be classified as a new family of highly energetic materials with increased density and performance, alongside decreased mechanical sensitivity. Additionally, novel tetrazole N‐oxide salts are proposed based on a diverse array of functional groups and ions pairs, which may be promising candidates for new energetic materials.     

4‐Nitro‐3‐(5‐tetrazole)furoxan and Its Salts: Synthesis,Characterization, and Energetic Properties

A series of new energetic salts based on 4‐nitro‐3‐(5‐tetrazole)furoxan (HTNF) has been synthesized. All of the salts have been fully characterized by nuclear magnetic resonance (¹H and ¹³C), infrared (IR) spectroscopy, elemental analysis, and differential scanning calorimetry (DSC). The crystal structures of neutral HTNF ( 3 ) and its ammonium ( 4 ) and N‐carbamoylguanidinium salts ( 9 ) have been determined by single‐crystal X‐ray diffraction analysis. The densities of 3 and its nine salts were found to range from 1.63 to 1.84 g cm^?3. Impact sensitivities have been determined by hammer tests, and the results ranged from 2 J (very sensitive) to >40 J (insensitive). Theoretical performance calculations (Gaussian 03 and EXPLO 5.05) provided detonation pressures and velocities for the ionic compounds 4 – 12 in the ranges 25.5–36.2 GPa and 7934–8919 m s^?1, respectively, which make them competitive energetic materials.     

Polarization Dependent Photoinduced Supramolecular Chirality in High-Performance Azo Materials

Here, we will show photo-induced supramolecular chirality in thin films of achiral amorphous polymers with azo groups in their side-chain. A matter of particular interest is the effect of various film thicknesses on azimuthal rotation and ellipticity of incident/transmitted polarized light. Furthermore, we investigated the temporal stability of inscribed chirality. By polarimetric measurements, we found out that the azimuthal rotation gets higher with layer thickness. In this scope, we were able to measure a very high azimuthal rotation of Δψ/d=112.5∘/μm. The inscribed chirality was stable for several days. Furthermore, we investigated the time-resolved behavior of incident and transmitted polarization ellipticities for various thicknesses. The time dependency may be explained by a two-step process: (1) fast trans-cis-isomerization resulting in photo-orientation and (2) slow photo-induced mass flow.     

Disubstituted Azidotetrazoles as Energetic Compounds

Base‐catalyzed activation of the C? F bond in the trifluoromethylazo‐substituted cyclic and acyclic alkanes provides a route to disubstituted azidotetrazoles. For example, the reaction of 1,2‐bis(trifluoromethylazo)ethane with four equivalents of NaN₃ gave the alkyl‐bridged bis(5‐azido‐1H‐tetrazol‐1‐yl)‐1,2‐dimine, N,N′‐bis(5‐azido‐1H‐tetrazol‐1‐yl)‐1,2‐diiminoethane, in 75 % yield (see scheme).

     

叠氮唑类高氮含能化合物的理论研究

基于2-叠氮-1,3-咪唑、3-叠氮-1,2,4-三唑和5-叠氮-1氢-四唑的晶体结构数据, 自行设计了同系列化合物叠氮-五唑的分子结构. 采用B3LYP方法, 选取6-311＋＋G**基组, 对叠氮唑类化合物进行优化并得到了稳定的分子构型, 结构参数与现有的实验数据相符. 故在此水平下对此系列化合物进行红外振动、键级及自然键轨道分析, 计算结果表明, 所有化合物均无虚频, 为势能面上的稳定结构, 分子中存在一个大的共轭体系|根据前线轨道能隙差(ΔE_L-H)得到4种化合物的热稳定顺序为: 5-叠氮-1-氢-四唑＞3-叠氮-1,2,4-三唑＞叠氮-五唑＞2-叠氮-1,3-咪唑|计算得到的生成热、密度、爆速爆压均随着体系中含氮量的增加而增加, 即叠氮-五唑的爆速、爆压最大, 爆速达到了9897 m•s^－1, 爆压达到了46.0 GPa, 在含能材料领域具有潜在的应用前景.     

Synthesis of 5‐Aminotetrazole‐1 N‐oxide and Its Azo Derivative: A Key Step in the Development of New Energetic Materials

1‐Hydroxy‐5‐aminotetrazole ( 1 ), which is a long‐desired starting material for the synthesis of hundreds of new energetic materials, was synthesized for the first time by the reaction of aqueous hydroxylamine with cyanogen azide. The use of this unique precursor was demonstrated by the preparation of several energetic compounds with equal or higher performance than that of commonly used explosives, such as hexogen (RDX). The prepared compounds, including energetic salts of 1‐hydroxy‐5‐aminotetrazole (hydroxylammonium ( 2 , two polymorphs) and ammonium ( 3 )), azo‐coupled derivatives (potassium ( 5 ), hydroxylammonium ( 6 ), ammonium ( 7 ), and hydrazinium 5,5′‐azo‐bis(1‐N‐oxidotetrazolate ( 8 , two polymorphs)), as well as neutral compounds 5,5′‐azo‐bis(1‐oxidotetrazole) ( 4 ) and 5,5′‐bis(1‐oxidotetrazole)hydrazine ( 9 ), were intensively characterized by low‐temperature X‐ray diffraction, IR, Raman, and multinuclear NMR spectroscopy, elemental analysis, and DSC. The calculated energetic performance, by using the EXPLO5 code, based on the calculated (CBS‐4M) heats of formation and X‐ray densities confirm the high energetic performance of tetrazole‐N‐oxides as energetic materials. Last but not least, their sensitivity towards impact, friction, and electrostatic discharge were explored. 5,5′‐Azo‐bis(1‐N‐oxidotetrazole) deflagrates close to the DDT (deflagration‐to‐detonation transition) faster than all compounds that have been investigated in our research group to date.     

An Alliance of Polynitrogen Heterocycles: Novel Energetic Tetrazinedioxide-Hydroxytetrazole-Based Materials

Energetic materials constitute one of the most important subtypes of functional materials used for various applications. A promising approach for the construction of novel thermally stable high-energy materials is based on an assembly of polynitrogen biheterocyclic scaffolds. Herein, we report on the design and synthesis of a new series of high-nitrogen energetic salts comprising the C-C linked 6-aminotetrazinedioxide and hydroxytetrazole frameworks. Synthesized materials were thoroughly characterized by IR and multinuclear NMR spectroscopy, elemental analysis, single-crystal X-ray diffraction and differential scanning calorimetry. As a result of a vast amount of the formed intra- and intermolecular hydrogen bonds, prepared ammonium and amino-1,2,4-triazolium salts are thermally stable and have good densities of 1.75–1.78 g·cm⁻³. All synthesized compounds show high detonation performance, reaching that of benchmark RDX. At the same time, as compared to RDX, investigated salts are less friction sensitive due to the formed net of hydrogen bonds. Overall, reported functional materials represent a novel perspective subclass of secondary explosives and unveil further opportunities for an assembly of biheterocyclic next-generation energetic materials.     

Nitroxy/Azido‐Functionalized Triazoles as Potential Energetic Plasticizers

The synthesis of a series of nitroxy‐ and azido‐functionalized compounds, based on 4‐amino‐3,5‐di(hydroxymethyl)‐1,2,4‐triazole, for possible use as an energetic plasticizers is described. All compounds were fully characterized. Two of them were further confirmed by X‐ray single crystal diffraction. Energetic performance was calculated by using EXPLO5 v6.01 based on calculated heats of formation (Gaussian 03) and experimentally determined densities at 25 °C. The results show that the nitration product 1‐nitro‐3,5‐di(nitroxymethyl)‐1,2,4‐triazole, containing a nitro group and two nitroxy groups, exhibits good detonation properties (D=8574 m s^?1, P=32.7 GPa). In addition, its low melting point makes it very attractive as an energetic plasticizer in solid propellants.     

Synthesis and Promising Properties of a New Family of High‐Nitrogen Compounds: Polyazido‐ and Polyamino‐Substituted N,N′‐Azo‐1,2,4‐triazoles

A new family of high‐nitrogen compounds, that is, polyazido‐ and polyamino‐substituted N,N′‐azo‐1,2,4‐triazoles, were synthesized in a safe and convenient manner and fully characterized. The structures of 3,3′,5,5′‐tetra(azido)‐4,4′‐azo‐1,2,4‐triazole ( 15 ) and 3,3′,5,5′‐tetra(amino)‐4,4′‐azo‐1,2,4‐triazole ( 23 ) were also confirmed by X‐ray diffraction. Differential scanning calorimetry (DSC) was performed to determine their thermal stability. Their heats of formation and density, which were calculated by using Gaussian 03, were used to determine the detonation performances of the related compounds (EXPLO 5.05). The heats of formation of the polyazido compounds were also derived by using an additive method. Compound 15 has the highest heat of formation (6933 kJ kg^?1) reported so far for energetic compounds and a detonation performance that is comparable to that of octahydro‐1,3,5,7‐tetranitro‐1,3,5,7‐tetrazocine (HMX), while compound 23 has a decomposition temperature of up to 290 °C.     

Promising Oxygen- and Nitrogen-Rich Azidonitramino Ether Plasticizers for Energetic Materials

A simple, mild and general method has been developed for the preparation of alkyl nitramines bearing a halogenoalkoxylic moiety. From these reactive halogen intermediates, a few azidoalkoxyl alkyl nitramines have been produced as energetic plasticizers. This simple protocol allows azidonitramino ether plasticizers to be obtained from available precursors in high yields, as it is safe and viable for large-scale operations. The resulting products have been fully characterized by spectral methods, and their impact sensitivity, thermal transformations and burning properties were determined, thus allowing complete comparison to the analogues including other combinations of structural units. Such characterization of these new plasticizers illustrates the extent to which the nature and position of the functional units can be used to tune the above properties of these nitramines. All azidonitramino ethers are liquid with excellent energetic performance and are promising candidates for new environmentally friendly energetic materials.