Interfacial Water Tuning by Intermolecular Spacing for Stable CO2 Electroreduction to C2+ Products

Electroreduction of CO₂ to multi-carbon (C₂₊) products is a promising approach for utilization of renewable energy, in which the interfacial water quantity is critical for both the C₂₊ product selectivity and the stability of Cu-based electrocatalytic sites. Functionalization of long-chain alkyl molecules on a catalyst surface can help to increase its stability, while it also tends to block the transport of water, thus inhibiting the C₂₊ product formation. Herein, we demonstrate the fine tuning of interfacial water by surface assembly of toluene on Cu nanosheets, allowing for sustained and enriched CO₂ supply but retarded water transfer to catalytic surface. Compared to bare Cu with fast cathodic corrosion and long-chain alkyl-modified Cu with main CO product, the toluene assembly on Cu nanosheet surface enabled a high Faradaic efficiency of 78 % for C₂₊ and a partial current density of 1.81 A cm⁻². The toluene-modified Cu catalyst further exhibited highly stable CO₂-to-C₂H₄ conversion of 400 h in a membrane-electrode-assembly electrolyzer, suggesting the attractive feature for both efficient C₂₊ selectivity and excellent stability.     

High‐Yield Electrochemical Production of Formaldehyde from CO2 and Seawater

The catalytic, electrocatalytic, or photocatalytic conversion of CO₂ into useful chemicals in high yield for industrial applications has so far proven difficult. Herein, we present our work on the electrochemical reduction of CO₂ in seawater using a boron‐doped diamond (BDD) electrode under ambient conditions to produce formaldehyde. This method overcomes the usual limitation of the low yield of higher‐order products, and also reduces the generation of H₂. In comparison with other electrode materials, BDD electrodes have a wide potential window and high electrochemical stability, and, moreover, exhibit very high Faradaic efficiency (74 %) for the production of formaldehyde, using either methanol, aqueous NaCl, or seawater as the electrolyte. The high Faradaic efficiency is attributed to the sp³‐bonded carbon of the BDD. Our results have wide ranging implications for the efficient and cost‐effective conversion of CO₂.     

Surface Iron Species in Palladium–Iron Intermetallic Nanocrystals that Promote and Stabilize CO2 Methanation

It is of pivotal importance to develop efficient catalysts and investigate the intrinsic mechanism for CO₂ methanation. Now, it is reported that PdFe intermetallic nanocrystals afforded high activity and stability for CO₂ methanation. The mass activity of fct‐PdFe nanocrystals reached 5.3 mmol g^?1 h^?1, under 1 bar (CO₂:H₂=1:4) at 180 °C, being 6.6, 1.6, 3.3, and 5.3 times as high as that of fcc‐PdFe nanocrystals, Ru/C, Ni/C, and Pd/C, respectively. After 20 rounds of successive reaction, 98 % of the original activity was retained for PdFe intermetallic nanocrystals. Further mechanistic studies revealed that PdFe intermetallic nanocrystals enabled the maintenance of metallic Fe species via a reversible oxidation–reduction process in CO₂ methanation. The metallic Fe in PdFe intermetallic nanocrystals induced the direct conversion of CO₂ into CO* as the intermediate, contributing to the enhanced activity.     

Surface Iron Species in Palladium–Iron Intermetallic Nanocrystals that Promote and Stabilize CO2 Methanation

It is of pivotal importance to develop efficient catalysts and investigate the intrinsic mechanism for CO₂ methanation. Now, it is reported that PdFe intermetallic nanocrystals afforded high activity and stability for CO₂ methanation. The mass activity of fct-PdFe nanocrystals reached 5.3 mmol g⁻¹ h⁻¹, under 1 bar (CO₂:H₂=1:4) at 180 °C, being 6.6, 1.6, 3.3, and 5.3 times as high as that of fcc-PdFe nanocrystals, Ru/C, Ni/C, and Pd/C, respectively. After 20 rounds of successive reaction, 98 % of the original activity was retained for PdFe intermetallic nanocrystals. Further mechanistic studies revealed that PdFe intermetallic nanocrystals enabled the maintenance of metallic Fe species via a reversible oxidation–reduction process in CO₂ methanation. The metallic Fe in PdFe intermetallic nanocrystals induced the direct conversion of CO₂ into CO* as the intermediate, contributing to the enhanced activity.     

Achieving Simultaneous CO2 and H2S Conversion via a Coupled Solar‐Driven Electrochemical Approach on Non‐Precious‐Metal Catalysts

Carbon dioxide (CO₂) and hydrogen sulfide (H₂S) are generally concomitant with methane (CH₄) in natural gas and traditionally deemed useless or even harmful. Developing strategies that can simultaneously convert both CO₂ and H₂S into value‐added products is attractive; however it has not received enough attention. A solar‐driven electrochemical process is demonstrated using graphene‐encapsulated zinc oxide catalyst for CO₂ reduction and graphene catalyst for H₂S oxidation mediated by EDTA‐Fe²⁺/EDTA‐Fe³⁺ redox couples. The as‐prepared solar‐driven electrochemical system can realize the simultaneous conversion of CO₂ and H₂S into carbon monoxide and elemental sulfur at near neutral conditions with high stability and selectivity. This conceptually provides an alternative avenue for the purification of natural gas with added economic and environmental benefits.     

Rechargeable Room‐Temperature Na–CO2 Batteries

Developing rechargeable Na–CO₂ batteries is significant for energy conversion and utilization of CO₂. However, the reported batteries in pure CO₂ atmosphere are non‐rechargeable with limited discharge capacity of 200 mAh g^?1. Herein, we realized the rechargeability of a Na–CO₂ battery, with the proposed and demonstrated reversible reaction of 3 CO₂+4 Na?2 Na₂CO₃+C. The battery consists of a Na anode, an ether‐based electrolyte, and a designed cathode with electrolyte‐treated multi‐wall carbon nanotubes, and shows reversible capacity of 60000 mAh g^?1 at 1 A g^?1 (≈1000 Wh kg^?1) and runs for 200 cycles with controlled capacity of 2000 mAh g^?1 at charge voltage <3.7 V. The porous structure, high electro‐conductivity, and good wettability of electrolyte to cathode lead to reduced electrochemical polarization of the battery and further result in high performance. Our work provides an alternative approach towards clean recycling and utilization of CO₂.     

Bromine-Enhanced Generation and Epoxidation of Ethylene in Tandem CO2 Electrolysis Towards Ethylene Oxide

The indirect electro-epoxidation of ethylene (C₂H₄), produced from CO₂ electroreduction (CO₂R), holds immense promise for CO₂ upcycling to valuable ethylene oxide (EO). However, this process currently has a mediocre Faradaic efficiency (FE) due to sluggish formation and rapid dissociation of active species, as well as reductive deactivation of Cu-based electrocatalysts during the conversion of C₂H₄ to EO and CO₂ to C₂H₄, respectively. Herein, we report a bromine-induced dual-enhancement strategy designed to concurrently promote both C₂H₄-to-EO and CO₂-to-C₂H₄ conversions, thereby improving EO generation, using single-atom Pt on N-doped CNTs (Pt₁/NCNT) and Br⁻-bearing porous Cu₂O as anode and cathode electrocatalysts, respectively. Physicochemical characterizations including synchrotron X-ray absorption, operando infrared spectroscopy, and quasi in situ Raman spectroscopy/electron paramagnetic resonance with theoretical calculations reveal that the favorable Br₂/HBrO generation over Pt₁/NCNT with optimal intermediate binding facilitates C₂H₄-to-EO conversion with a high FE of 92.2 %, and concomitantly, the Br⁻ with strong nucleophilicity protects active Cu⁺ species in Cu₂O effectively for improved CO₂-to-C₂H₄ conversion with a FE of 66.9 % at 800 mA cm⁻², superior to those in the traditional chloride-mediated case. Consequently, a single-pass FE as high as 41.1 % for CO₂-to-EO conversion can be achieved in a tandem system.     

An Aqueous Redox Flow Battery Using CO2 as an Active Material with a Homogeneous Ir Catalyst**

For the application of CO₂ as an energy storage material, a H₂ storage system has been proposed based on the interconversion of CO₂ and formic acid (or formate). However, energy losses are inevitable in the conversion of electrical energy to H₂ as chemical energy (≈70 % electrical efficiency) and H₂ to electrical energy (≈40 % electrical efficiency). To overcome these significant energy losses, we developed a system based on the interconversion of CO₂ and formate for the direct storage and generation of electricity. In this paper, we report an aqueous redox flow battery system using homogeneous Ir catalysts with CO₂-formate redox pair. The system exhibited a maximum discharge capacity of 10.5 mAh (1.5 Ah L⁻¹), capacity decay of 0.2 % per cycle, and total turnover number of 2550 after 50 cycles. During charging-discharging, in situ fluorescence X-ray absorption fine structure spectroscopy based on an online setup indicated that the active species was in a high valence state of Ir^IV.     

Tandem Synergistic Effect of Cu-In Dual Sites Confined on the Edge of Monolayer CuInP2S6 toward Selective Photoreduction of CO2 into Multi-Carbon Solar Fuels

One-unit-cell, single-crystal, hexagonal CuInP₂S₆ atomically thin sheets of≈0.81 nm in thickness was successfully synthesized for photocatalytic reduction of CO₂. Exciting ethene (C₂H₄) as the main product was dominantly generated with the yield-based selectivity reaching ≈56.4 %, and the electron-based selectivity as high as ≈74.6 %. The tandem synergistic effect of charge-enriched Cu−In dual sites confined on the lateral edge of the CuInP₂S₆ monolayer (ML) is mainly responsible for efficient conversion and high selectivity of the C₂H₄ product as the basal surface site of the ML, exposing S atoms, can not derive the CO₂ photoreduction due to the high energy barrier for the proton-coupled electron transfer of CO₂ into *COOH. The marginal In site of the ML preeminently targets CO₂ conversion to *CO under light illumination, and the *CO then migrates to the neighbor Cu sites for the subsequent C−C coupling reaction into C₂H₄ with thermodynamic and kinetic feasibility. Moreover, ultrathin structure of the ML also allows to shorten the transfer distance of charge carriers from the interior onto the surface, thus inhibiting electron-hole recombination and enabling more electrons to survive and accumulate on the exposed active sites for CO₂ reduction.     

A Doping Technique that Suppresses Undesirable H2 Evolution Derived from Overall Water Splitting in the Highly Selective Photocatalytic Conversion of CO2 in and by Water

Photocatalytic conversion of CO₂ to reduction products, such as CO, HCOOH, HCHO, CH₃OH, and CH₄, is one of the most attractive propositions for producing green energy by artificial photosynthesis. Herein, we found that Ga₂O₃ photocatalysts exhibit high conversion of CO₂. Doping of Zn species into Ga₂O₃ suppresses the H₂ evolution derived from overall water splitting and, consequently, Zn‐doped, Ag‐modified Ga₂O₃ exhibits higher selectivity toward CO evolution than bare, Ag‐modified Ga₂O₃. We observed stoichiometric amounts of evolved O₂ together with CO. Mass spectrometry clarified that the carbon source of the evolved CO is not the residual carbon species on the photocatalyst surface, but the CO₂ introduced in the gas phase. Doping of the photocatalyst with Zn is expected to ease the adsorption of CO₂ on the catalyst surface.     

Influence of Composition of Nickel-Iron Nanoparticles for Abiotic CO2 Conversion to Early Prebiotic Organics

Abiotic synthesis of formate and short hydrocarbons takes place in serpentinizing vents where some members of vent microbial communities live on abiotic formate as their main carbon source. To better understand the catalytic properties of Ni−Fe minerals that naturally exist in hydrothermal vents, we have investigated the ability of synthetic Ni−Fe based nanoparticular solids to catalyze the H₂-dependent reduction of CO₂, the first step required for the beginning of pre-biotic chemistry. Mono and bimetallic Ni−Fe nanoparticles with varied Ni-to-Fe ratios transform CO₂ and H₂ into intermediates and products of the acetyl-coenzyme A pathway—formate, acetate, and pyruvate—in mM range under mild hydrothermal conditions. Furthermore, Ni−Fe catalysts converted CO₂ to similar products without molecular H₂ by using water as a hydrogen source. Both CO₂ chemisorption analysis and post-reaction characterization of materials indicate that Ni and Fe metals play complementary roles for CO₂ fixation.     

CO2 Capture,Separation and Reduction on Boron-Doped MoS2, MoSe2 and Heterostructures with Different Doping Densities: A Theoretical Study

Designing high-performance materials for CO₂ capture and conversion is of great significance to reduce the greenhouse effect and alleviate the energy crisis. The strategy of doping is widely used to improve activity and selectivity of the materials. However, it is unclear how the doping densities influence the materials’ properties. Herein, we investigated the mechanism of CO₂ capture, separation and conversion on MoS₂, MoSe₂ and Janus MoSSe monolayers with different boron doping levels using density functional theory (DFT) simulations. The results indicate that CO₂, H₂ and CH₄ bind weakly to the monolayers without and with single-atom boron doping, rendering these materials unsuitable for CO₂ capture from gas mixtures. In contrast, CO₂ binds strongly to monolayers doped with diatomic boron, whereas H₂ and CH₄ can only form weak interactions with these surfaces. Thus, the monolayers doped with diatomic boron can efficiently capture and separate CO₂ from such gas mixtures. The electronic structure analysis demonstrates that monolayers doped with diatomic doped are more prone to donating electrons to CO₂ than those with single-atom boron doped, leading to activation of CO₂. The results further indicate that CO₂ can be converted to CH₄ on diatomic boron doped catalysts, and MoSSe is the most efficient of the surfaces studied for CO₂ capture, separation and conversion. In summary, the study provides evidence for the doping density is vital to design materials with particular functions.     

Simultaneous co-Photocatalytic CO2 Reduction and Ethanol Oxidation towards Synergistic Acetaldehyde Synthesis

Photocatalytic conversion of CO₂ is of great interest but it often suffers sluggish oxidation half reaction and undesired by-products. Here, we report for the first the simultaneous co-photocatalytic CO₂ reduction and ethanol oxidation towards one identical value-added CH₃CHO product on a rubidium and potassium co-modified carbon nitride (CN-KRb). The CN-KRb offers a record photocatalytic activity of 1212.3 μmol h⁻¹g⁻¹ with a high selectivity of 93.3 % for CH₃CHO production, outperforming all the state-of-art CO₂ photocatalysts. It is disclosed that the introduced Rb boosts the *OHCCHO fromation and facilitates the CH₃CHO desorption, while K promotes ethanol adsorption and activation. Moreover, the H⁺ stemming from ethanol oxidation is confirmed to participate in the CO₂ reduction process, endowing near ideal overall atomic economy. This work provides a new strategy for effective use of the photoexcited electron and hole for high selective and sustainable conversion of CO₂ paired with oxidation reaction into identical product.     

Efficient Photoelectrochemical Reduction of Carbon Dioxide to Formic Acid: A Functionalized Ionic Liquid as an Absorbent and Electrolyte

Photoelectrochemical (PEC) reduction of carbon dioxide (CO₂) is a potential method for production of fuels and chemicals from a C1 feedstock accumulated in the atmosphere. However, the low solubility of CO₂ in water, and complicated processes associated with capture and conversion, render CO₂ conversion inefficient. A new concept is proposed in which a PEC system is used to capture and convert CO₂ into formic acid. The process is assisted by an ionic liquid (1‐aminopropyl‐3‐methylimidazolium bromide) aqueous solution, which functions as an absorbent and electrolyte at ambient temperature and pressure. Within this PEC reduction strategy, the ionic liquid plays a critical role in promoting the conversion of CO₂ to formic acid and suppressing the reduction of H₂O to H₂. At an applied voltage of 1.7 V, the Faradaic efficiency for formic acid production is as high as 94.1 % and the electro‐to‐chemical efficiency is 86.2 %.     

Isotope Effects in Plasmonic Photosynthesis

The photoexcitation of plasmonic nanoparticles has been shown to drive multistep, multicarrier transformations, such as the conversion of CO₂ into hydrocarbons. But for such plasmon-driven chemistry to be precisely understood and modeled, the critical photoinitiation step in the reaction cascade must be identified. We meet this goal by measuring H/D and ¹²C/¹³C kinetic isotope effects (KIEs) in plasmonic photosynthesis. In particular, we found that the substitution of H₂O with D₂O slows hydrocarbon production by a factor of 5–8. This primary H/D KIE leads to the inference that hole-driven scission of the O−H bond in H₂O is a critical, limiting step in plasmonic photosynthesis. This study advances mechanistic understanding of light-driven chemical reactions on plasmonic nanoparticles.     

Removal of SO2 from Gas Streams by Oxidation using Plasma-Generated Hydroxyl Radicals

The key problem for the removal of SO₂ by electrical discharge methods is how to obtain the hydroxyl radicals at high concentration and large production rates. With the micro-gap discharge method, O₂ and H₂O in simulated gas streams (N₂/O₂/H₂O/SO₂) are ionized into a large number of OH^. radicals to oxidize SO₂ into SO₃ which reacts with H₂O forming H₂SO₄ droplets at 120 °C in the absence of any catalyst or absorbent. The droplets are captured with an electrostatic precipitator. As a result, conversion of SO₂ to primarily H₂SO₄ is limited by the generation of OH^. radicals. By increasing the reduced field and concentrations of O₂ and H₂O, the amount of OH^. radicals increase resulting in more removal of SO₂ from gas streams. The removal efficiency of SO₂ reaches 100% when the residence time is only 0.74 s. Therefore, a new gas-phase oxidation method for removal of SO₂ without NH₃ additive is found.     

Wurtzite CuGaS2 with an In-Situ-Formed CuO Layer Photocatalyzes CO2 Conversion to Ethylene with High Selectivity

We present surface reconstruction-induced C−C coupling whereby CO₂ is converted into ethylene. The wurtzite phase of CuGaS_2. undergoes in situ surface reconstruction, leading to the formation of a thin CuO layer over the pristine catalyst, which facilitates selective conversion of CO₂ to ethylene (C₂H₄). Upon illumination, the catalyst efficiently converts CO₂ to C₂H₄ with 75.1 % selectivity (92.7 % selectivity in terms of R_electron) and a 20.6 μmol g⁻¹ h⁻¹ evolution rate. Subsequent spectroscopic and microscopic studies supported by theoretical analysis revealed operando-generated Cu²⁺, with the assistance of existing Cu⁺, functioning as an anchor for the generated *CO and thereby facilitating C−C coupling. This study demonstrates strain-induced in situ surface reconstruction leading to heterojunction formation, which finetunes the oxidation state of Cu and modulates the CO₂ reduction reaction pathway to selective formation of ethylene.     

Synergistic Interplay of Dual-Active-Sites on Metallic Ni-MOFs Loaded with Pt for Thermal-Photocatalytic Conversion of Atmospheric CO2 under Infrared Light Irradiation

Infrared light driven photocatalytic reduction of atmospheric CO₂ is challenging due to the ultralow concentration of CO₂ (0.04 %) and the low energy of infrared light. Herein, we develop a metallic nickel-based metal–organic framework loaded with Pt (Pt/Ni-MOF), which shows excellent activity for thermal-photocatalytic conversion of atmospheric CO₂ with H₂ even under infrared light irradiation. The open Ni sites are beneficial to capture and activate atmospheric CO₂, while the photogenerated electrons dominate H₂ dissociation on the Pt sites. Simultaneously, thermal energy results in spilling of the dissociated H₂ to Ni sites, where the adsorbed CO₂ is thermally reduced to CO and CH₄. The synergistic interplay of dual-active-sites renders Pt/Ni-MOF a record efficiency of 9.57 % at 940 nm for converting atmospheric CO₂, enables the procurement of CO₂ to be independent of the emission sources, and improves the energy efficiency for trace CO₂ conversion by eliminating the capture media regeneration and molecular CO₂ release.     

Highly Selective Photoelectroreduction of Carbon Dioxide to Ethanol over Graphene/Silicon Carbide Composites

Using sunlight to produce valuable chemicals and fuels from carbon dioxide (CO₂), i.e., artificial photosynthesis (AP) is a promising strategy to achieve solar energy storage and a negative carbon cycle. However, selective synthesis of C₂ compounds with a high CO₂ conversion rate remains challenging for current AP technologies. We performed CO₂ photoelectroreduction over a graphene/silicon carbide (SiC) catalyst under simulated solar irradiation with ethanol (C₂H₅OH) selectivity of>99 % and a CO₂ conversion rate of up to 17.1 mmol g_cat⁻¹ h⁻¹ with sustained performance. Experimental and theoretical investigations indicated an optimal interfacial layer to facilitate the transfer of photogenerated electrons from the SiC substrate to the few-layer graphene overlayer, which also favored an efficient CO₂ to C₂H₅OH conversion pathway.     

A Biomimetic Nickel Complex with a Reduced CO2 Ligand Generated by Formate Deprotonation and Its Behaviour towards CO2

Reduced CO₂ species are key intermediates in a variety of natural and synthetic processes. In the majority of systems, however, they elude isolation or characterisation owing to high reactivity or limited accessibility (heterogeneous systems), and their formulations thus often remain uncertain or are based on calculations only. We herein report on a Ni?CO₂^2? complex that is unique in many ways. While its structural and electronic features help understand the CO₂‐bound state in Ni,Fe carbon monoxide dehydrogenases, its reactivity sheds light on how CO₂ can be converted into CO/CO₃^2? by nickel complexes. In addition, the complex was generated by a rare example of formate β‐deprotonation, a mechanistic step relevant to the nickel‐catalysed conversion of H_xCO_y^z? at electrodes and formate oxidation in formate dehydrogenases.