Nobler than the Noblest: Noncubic Gold Microcrystallites

Conventional gold comprising the cubic lattice is universally known for its stability. However, well known to chemists and metallurgists, this nobility is challenged by reagents such as aqua regia, which dissolve gold to form a salt solution. Among metals, mercury blends with gold to form amalgam, otherwise transition metals such as copper tend to interact with gold surfaces in electrochemical media. Herein, we report a combined experimental and theoretical investigation of the stability of Au microcrystallites bearing unconventional crystal lattices that exhibit enhanced stability towards Hg and aqua regia and practically no interaction with Cu during electroless plating. The unconventional gold is undoubtedly nobler.     

New convenient dissolution of iron-rhodium alloys using hydrochloric acid containing a small amount of nitric acid without heating for an ICP-AES analysis.

A new convenient dissolution method for Fe-Rh alloys has been developed. Aqua regia has been used for the dissolution of rhodium alloy samples. However, it is difficult to dissolve high-concentration rhodium (more than 50 mass%) in aqua regia, because a rhodium-passivity on the alloys surface occurs with nitric acid. By using hydrochloric acid containing a small volume of nitric acid, Fe-Rh (24-64 mass%) alloys could be completely decomposed and dissolved under mild experimental conditions. The principal advantages of this method are simplicity and time-saving compared with other dissolution methods.     

Complete phase behavior of the symmetrical colloidal electrolyte

We computed the complete phase diagram of the symmetrical colloidal electrolyte by means of Monte Carlo simulations. Thermodynamic integration, together with the Einstein-crystal method, and Gibbs-Duhem integration were used to calculate the equilibrium phase behavior. The system was modeled via the linear screening theory, where the electrostatic interactions are screened by the presence of salt in the medium, characterized by the inverse Debye length, kappa (in this work kappasigma=6). Our results show that at high temperature, the hard-sphere picture is recovered, i.e., the liquid crystallizes into a fcc crystal that does not exhibit charge ordering. In the low temperature region, the liquid freezes into a CsCl structure because charge correlations enhance the pairing between oppositely charged colloids, making the liquid-gas transition metastable with respect to crystallization. Upon increasing density, the CsCl solid transforms into a CuAu-like crystal and this one, in turn, transforms into a tetragonal ordered crystal near close packing. Finally, we have studied the ordered-disordered transitions finding three triple points where the phases in coexistence are liquid-CsCl-disordered fcc, CsCl-CuAu-disordered fcc, and CuAu-tetragonal-disordered fcc.     

Rapid determination of traces of silver in sulphide ores by atomic absorption

The silver in sulphide ores is assayed by dissolution of the sample in aqua regia, addition of excess of ammonia solution and the measurement of the atomic absorbance of the supernatant solution at 328.1 nm.     

Controlled‐Atmosphere Flame Fusion Single‐Crystal Growth of Non‐Noble fcc,hcp, and bcc Metals Using Copper,Cobalt, and Iron

The growth of noble‐metal single crystals via the flame fusion method was developed in the 1980s. Since then, there have been no major advancements to the technique until the recent development of the controlled‐atmosphere flame fusion (CAFF) method to grow non‐noble Ni single crystals. Herein, we demonstrate the generality of this method with the first preparation of fcc Cu as well as the first hcp and bcc single crystals of Co and Fe, respectively. The high quality of the single crystals was verified using scanning electron microscopy and Laue X‐ray backscattering. Based on Wulff constructions, the equilibrium shapes of the single‐crystal particles were studied, confirming the symmetry of the fcc, hcp, and bcc single‐crystal lattices. The low cost of the CAFF method makes all kinds of high‐quality non‐noble single crystals independent of their lattice accessible for use in electrocatalysis, electrochemistry, surface science, and materials science.     

Au和SiO2多壳结构的制备和表征

利用自组装技术和胶体还原化学, 制备出金纳米壳Au@SiO₂以及SiO₂包裹的金纳米壳SiO₂@Au@SiO₂; 去除SiO₂@Au@SiO₂颗粒中的金壳层, 获得含有可移动SiO₂核的空心壳H-SiO₂@M-SiO₂. 结果显示: SiO₂@Au@SiO₂复合颗粒表面光滑, 并保留了金壳的近红外吸收特性; 通过改变复合颗粒外层SiO₂厚度, 可以调节其等离激元共振峰的位置; 王水可以有效地去除SiO₂@Au@SiO₂中的金壳, 相应的等离激元共振峰消失.     

Extractability of HgS (cinnabar and metacinnabar) by hydrochloric acid

In this work we investigated the behaviour of pure HgS during extraction with dilute HCl to establish its extractability in 1 and 6 M HCl at the concentration level close to those occurring in natural sediments and soils. We found that neither cinnabar nor metacinnabar were soluble in 1 M HCl, whereas both were partially extracted by 6 M HCl. Metacinnabar precipitated in the laboratory was most prone to dissolution in 6 M HCl (up to 90%), followed by crystalline (commercial) metacinnabar (up to 70%) and cinnabar (up to 15%). Solubility of HgS in 6 M HCl was found to be dependent on its concentration, and an exponential relationship between quantity of HgS added to 20 mL of 6 M HCl (the range of 0.1-10 mg was used) and the solubility in 6 M HCl was established. For higher concentrations of HgS (10 mg in 20 mL of acid), a similarly low solubility of cinnabar was obtained as found in the literature. A study of dissolution kinetics of HgS in 6 M HCl indicated that it was a fairly slow process. Unexpected oxidation of HgS in water or 1 M HCl was found for extractions performed in Teflon vials previously used for the digestion of residual undissolved HgS by aqua regia. We presumed that the Teflon material could preserve some oxidising gases (presumably Cl(2)) developed during digestion with aqua regia which can then oxidise HgS during extraction with water or 1 M HCl. Regarding the extraction of Hg from natural sediments, we concluded that 6 M HCl could not be used to extract reactive Hg and predict bioavailability of mercury in sediments containing HgS and that experiments with model compounds should not be done at a concentration level several orders of magnitude higher than in natural samples.     

立方面心C60晶体晶格振动的研究

采用C60分子之间相互作用势的Kihra形式,研究了立方面心C60晶体的晶格振动问题,得到了质心振动沿[111]、[110]及[100]方向的声子散射圆频率分布曲线及C60晶格振动频率的态密度分布.采用所得到的C60晶格振动频率的态密度分布,计算了晶体C60在298 K时的等压热容,所得数值与实验值相符.     

Comparison of wet microwave digestion methods of plant materials for the determination of metals by flame atomic absorption spectrometry

Microwave closed-system wet digestion procedures for plant samples were examined. Each procedure was tested with samples of tobacco and cabbage, and included digestion by the use of different acids composition, almost complete evaporation of the digest, and then dissolution of the residue in 1% nitric acid. Three microwave digestion programs that varied power, duration, and temperature were used. Closed-vessel reactions followed open-vessel reaction-delay time. Using flame atomic absorption spectrometry on the digests, four or five elements were determined to evaluate effectiveness, precision and accuracy of analytes extraction into solution. After a preliminary study of tobacco digests, the four most effective procedures were chosen, and detailed investigations were carried out on both tobacco and cabbage reference materials. Although all four of the final procedures were accurate, the most precise procedure, with the lowest errors of determination, was using reverse ‘aqua regia’ for tobacco and ‘aqua regia’ for cabbage.     

Doped colloidal photonic crystal structure with refractive index chirping to the [111] crystallographic axis

A three-dimensionally ordered array of close-packed colloidal spheres, a photonic crystal structure in which the refractive index of the medium interstitial lattice in a colloidal crystal spatially changes in the [111] crystallographic axis, is demonstrated. The colloidal photonic crystal structure with refractive index chirping was produced by infiltration of a monomer and organic dopants with a high refractive index into a silica opal, followed by interfacial gel polymerization. The resulting photonic crystal structure has a gradually varying stop band at each different (111) plane in the face-centered cubic (fcc) crystal structure at a normal incidence. This novel structure exhibited optical characteristics that have band-gap broadening by the superposition of stop bands at each plane of the crystal with different dielectric functions. Moreover, the refractive index perturbation in the [111] fcc opal also showed a defect state within a pseudo-photonic band gap. This new type of photonic crystal structure should be useful for the band-gap engineering of photonic-band-gap materials.     

Development of a new microelectrolysis system for in-situ electrodeposition of ultra-traces of gold prior to measurement by ETAAS

Electrodeposition is known to be suitable for separation and preconcentration of extremely low concentrations of analyte from bulk samples and is instrumentally is very simple. In this approach a new combined system was designed for in-situ electrodeposition of ultratrace levels of gold from micro samples on to a graphite furnace prior to determination by electrothermal atomic absorption spectrometry (ETAAS). Sediment samples were digested and traces of the gold content were extracted with boiling aqua regia. To prevent the highly corrosive effect of aqua regia media, the graphite tube surface was pre-coated by electrodeposition of ppm amounts of Pd prior to sample introduction. Separation of the analyte from the matrix was achieved by electrodeposition of the analyte in situ on the Pd/C surface of the furnace tube. Vanadium was also used as a modifier to stabilize the analyte from decomposition at charring temperatures. By using the proposed microelectrolysis preconcentration technique a considerable improvement in sensitivity and detection limit was achieved compared with conventional ETAAS. Characteristic masses for ED-ETAAS techniques in both nitric acid and aqua regia were reported to be m(o)=4.1 pg, with %RSD=2.9; the calculated LOD was 0.105 ppb, and typical calibration graphs for this element in nitric acid and aqua regia for both techniques were linear up to 70 microg L(-1) with about 99% recovery. Six reference sediments samples were tested by the proposed technique and by the Conv-ETAAS method. The results were in agreement with recommended values (reported by a reference laboratory using UV-visible spectrometry), demonstrating the efficiency of extraction and preconcentration of ultratrace levels of gold.     

Microwave-assisted aqua regia digestion for determining platinum,palladium, rhodium and lead in catalyst materials

This study investigated a microwave-assisted aqua regia digestion of catalyst samples prior to the determination of Pt, Pd, Rh and Pb by ICP-OES. While optimising the method, the effect of digestion temperature on the digestion efficiency was investigated. Few aqua regia digestions were also carried out using a high pressure asher, with a digestion temperature of 280 °C. In addition, XRD (X-ray diffractometry) was used to characterise digestion residue. The study showed that accurate and reliable results for Pt, Pd, Rh and Pb in a recycled monolith catalyst (NIST SRM 2557) were obtained by ICP-OES after the microwave assisted aqua regia digestion. The amounts of Pt, Pd and Rh in the prepared catalyst samples were also at the expected levels. Furthermore, the results indicated that the main part of the impurities and supporting material elements can be quantitatively extracted from the catalyst samples by using the microwave-assisted aqua regia sample pre-treatment.     

Isotope dilution inductively coupled plasma quadrupole mass spectrometry in connection with a chromatographic separation for ultra trace determinations of platinum group elements (Pt, Pd, Ru, Ir) in environmental samples

An isotope dilution inductively coupled plasma quadrupole mass spectrometric (ID-ICP-QMS) method was developed for the simultaneous determination of the platinum group elements Pt, Pd, Ru, and Ir in environmental samples. Spike solutions, enriched with the isotopes 194Pt, 108Pd, 99Ru, and 191Ir, were used for the isotope dilution step. Interfering elements were eliminated by chromatographic separation using an anion-exchange resin. Samples were dissolved with aqua regia in a high pressure asher. Additional dissolution of possible silicate portions by hydrofluoric acid was usually not necessary. Detection limits of 0.15 ng x g(-1), 0.075 ng x g(-1), and 0.015 ng x g(-1) were achieved for Pt, Pd, Ru, and Ir, respectively, using sample weights of only 0.2 g. The reliability of the ID-ICP-QMS method was demonstrated by analyzing a Canadian geological reference material and by participating in an interlaboratory study for the determination of platinum and palladium in a homogenized road dust sample. Surface soil, sampled at different distances from a highway, showed concentrations in the range of 0.1-87 ng x g(-1). An exponential decrease of the platinum and palladium concentration with increasing distance and a small anthropogenic contribution to the natural background concentration of ruthenium and iridium was found in these samples.     

General route to three-dimensional framework uranyl transition metal phosphates with atypical structural motifs: the case examples of Cs2{(UO2)4[Co(H2O)2]2(HPO4)(PO4)4} and Cs3+x[(UO2)3CuH4-x(PO4)5].H2O

The reaction of UO2(NO3)2.6H2O with Co or Cu metal, phosphoric acid, and CsCl under mild hydrothermal conditions results in the formation of Cs2{(UO2)4[Co(H2O)2(HPO4)(PO4)4} (1) or Cs(3+x)[(UO2)3CuH(4-x)(PO4)5].H2O (2). The structure of 1 contains uranium atoms in pentagonal bipyramidal and hexagonal bipyramidal environments. The interaction of the uranyl cations and phosphate anions creates layers in the [ab] plane. The uranyl phosphate layers are joined together by octahedral Co centers wherein the Co is bound by phosphate and two cis water molecules. In addition, the Co ions are also ligated by a uranyl oxo atom. The presence of these octahedral building units stitches the structure together into a three-dimensional framework where void spaces are filled by Cs+ cations. The structure of 2 contains uranium centers in UO6 tetragonal bipyramidal and UO7 pentagonal bipyramidal geometries. The uranyl moieties are bridged by phosphate anions into sinusoidal sheets that extend into the [bc] plane and are linked into a three-dimensional structure by Cu(II). The Cu centers reside in square planar environments. Charge balance is maintained by Cs+ cations. Both the overall structures and the uranyl phosphate layers in 1 and 2 are novel.     

Force acting on the microparticles in electrorheological solids under the application of a nonuniform ac electric field

Under the application of electric fields, the structure of electrorheological (ER) solids can be changed from the body-centered tetragonal lattice to other lattices. We have derived the dipole factor for the lattice by taking into account the local-field effect through the Ewald–Kornfeld formulation, and expressed it in the spectral representation exactly. It is found that when the ER solid is subject to a nonuniform ac electric field, the force acting on the microparticle can be affected by the structure transformation, and local-field effect as well as field frequency. Our results are very well understood in the spectral representation theory.     

Oxidative extraction versus total decomposition of soil in the determination of thallium

An aqua regia extraction and a total decomposition of soil were compared in terms of thallium determination. A sequential extraction of soil, according to the BCR protocol, was also performed for additional information on thallium distribution in soil fractions. Certified reference material—soil GBW 07401 of Chinese origin, containing 1 ± 0.2 ppm of thallium was used in these experiments. Thallium was determined by flow injection-differential pulse-anodic stripping voltammetry (FI-DP-ASV). Only 35% of total thallium was extracted in the aqua regia extraction, while the total decomposition led to satisfactory recovery. The sequential extraction showed that only 5% of thallium in GBW 07401 is dissolvable in the four BCR procedure fractions, and that 95% of the element is entrapped in the residual parent matter. These results show that the aqua regia extraction does not ensure complete thallium extraction from soil. Surprisingly, the total decomposition is significantly less time consuming than the aqua regia extraction.     

Oxidation of elemental gold in alcohol solutions

Gold is designated as the noblest metal because of its chemical inertness. It is known to dissolve in cyanide solutions in the presence of air or H2O2 or in halogen-containing solutions, aqua regia being the most famous example. Herein, we report a unique thiol, especially 4-pyridinethiol (4-PS), assisted dissolution of Au in alcohol solutions. Although dissolution was found to be very selective for pyridinethiols, such a phenomenon is astonishing since thiols are commonly used as etch resists for Au and even 4-PS is extensively used as a surface modifier for Au. To gain further understanding of the dissolution process, the influence of the reaction conditions was extensively studied. On the basis of the obtained results, a mechanism for the dissolution reaction is proposed. Fascinatingly, by tuning of the reaction conditions, this phenomenon can be applied in selective preparation of self-supporting nanometer-thick Au foils.     

Comparison of chemical modifiers for selenium determination in soil aqua regia extracts by ZETAAS

The effect of various chemical modifiers 0.5 g l⁻¹ Pd, 1% (w/v) Ni, 0.5 g l⁻¹ Pd + 1% (w/v) Ni and 1.0 g l⁻¹ Pd on the measurement of selenium in soil aqua regia extracts, by ZETAAS, is described. Two Certified Reference Materials (CRMs) RTC-CRM 023-050 and RTC-CRM 025-050 were used for this study. Pyrolysis and atomization curves were obtained for each chemical modifier and their optimal values were assessed. By using standard addition as calibration method, accurate results were obtained for all the chemical modifiers studied. The precision was similar for both CRMs, with a maximum value of 7.5% R.S.D. The limits of detection and quantification for selenium in the soil extracts (n = 10) were 3.0 and 6.0 μg l⁻¹, respectively. The characteristic mass of selenium is assessed as 10 pg. The use of aqua regia as extractant gave quantitative results for selenium in the CRMs assayed.     

Model potential for beryllium clusters

A many-body potential is developed for beryllium based on the electronic information extracted from the total energy surface of clusters with up to 5 atoms. The cluster sequence of growth generated with the potential is in excellent agreement with the quantum mechanical calculations in the literature. The hcp lattice of bulk beryllium is correctly found to be more stable than fcc and bcc lattices.     

CsCu5S3 – eine neue Verbindung in zwei Modifikationen

CsCu₅S₃ – A New Compound existing in two Modifications CsCu₅S₃ has been obtained in form of two modifications in a flux of cesium thiocyanate. Single crystal investigations revealed a tetragonal modification closely related to the structure of TlCu₅Se₃. The orthorhombic crystallizing modification can be described as a layer structure. The copper atoms in both atomic arrangements form arrays (fragment frame structures) of the fcc copper structure. At 582 °C the orthorhombic modification transforms easily into the tetragonal one, while the reverse reaction occurs very slowly.