Cross-Coupling Reactions Enabled by Well-Defined Ag(III) Compounds: Main Focus on Aromatic Fluorination and Trifluoromethylation

Ag^III compounds are considered strong oxidizers of difficult handling. Accordingly, the involvement of Ag catalysts in cross-coupling via 2e⁻ redox sequences is frequently discarded. Nevertheless, organosilver(III) compounds have been authenticated using tetradentate macrocycles or perfluorinated groups as supporting ligands, and since 2014, first examples of cross-coupling enabled by Ag^I/Ag^III redox cycles saw light. This review collects the most relevant contributions to this field, with main focus on aromatic fluorination/perfluoroalkylation and the identification of Ag^III key intermediates. Pertinent comparison between the activity of Ag^IIIR_F compounds in aryl-F and aryl-CF₃ couplings vs. the one shown by its Cu^IIIR_F and Au^IIIR_F congeners is herein disclosed, thus providing a more profound picture on the scope of these transformations and the pathways commonly associated to C−R_F bond formations enabled by coinage metals.     

C−H Bond Trifluoromethylation of Arenes Enabled by a Robust,High‐Valent Nickel(IV) Complex

The robust, high‐valent Ni^IV complex [(Py)₂Ni^IVF₂(CF₃)₂] (Py=pyridine) was synthesized and fully characterized by NMR spectroscopy, X‐ray diffraction, and elemental analysis. It reacts with aromatic compounds at 25 °C to form the corresponding benzotrifluorides in nearly quantitative yield. The monomeric and dimeric Ni^IIICF₃ complexes 2 ⋅Py and 2 were identified as key intermediates, and their structures were unambiguously determined by EPR spectroscopy and X‐ray diffraction. Preliminary kinetic studies in combination with the isolation of reaction intermediates confirmed that the C−H bond‐breaking/C−CF₃ bond‐forming sequence can occur both at Ni^IVCF₃ and Ni^IIICF₃ centers.     

Aluminum(I)/Boron(III) Redox Reactions

Reactions between B^III species and the novel nucleophilic cyclopentadienyl‐stabilized Al^I reagent ( 1 ) result in a diversity of complexes bearing different Al/B oxidation states and coordination geometries. With the triarylborane B(C₆F₅)₃, a simple Al^I→B^III adduct is formed. In contrast, a bulky aryldihaloborane undergoes oxidative addition with the formation of a covalent bora‐alane species. With an N‐heterocyclic carbene‐stabilized amino(bromo)borenium ion, a redox reaction was observed, where the product is a borylene‐alane B^I→Al^III complex. Additionally, reaction of 1 with BI₃ results in complete scrambling of all of the Al/B‐bound substituents, and the formation of a cyclopentadienylboron(I)→AlI₃ complex. These latter reactions are the first examples of the reduction of a boron(III) compound to a borylene by a p‐block reagent, and illustrate how subtle changes in the nature of the borane can result in highly divergent reaction outcomes.     

Investigation of Bis(Perfluoro-tert-Butoxy) Halogenates(I/III)

A systematic study of halogenate(I/III) anions with polyatomic ligands is presented. The bis(perfluoro-tert-butoxy) halogenates(I) [X(OC₄F₉)₂]⁻, X=Cl, Br, I, of chlorine, bromine, and iodine are prepared as their tetraethylammonium salts and characterized with IR, Raman, and NMR spectroscopic methods, as well as single-crystal X-ray diffraction analyses. Spectroscopical data are supported by quantum-chemical calculations. Additionally, the bonding situation of the species in question are analyzed and discussed. Furthermore, the oxidation to the corresponding halogenate(III) derivatives was studied. For [Br(OC₄F₉)₂]⁻, oxidation with elemental fluorine gave [BrF₂(OC₄F₉)₂]⁻. Iodide was directly oxidized by ClOC₄F₉ to the I^III species [I(OC₄F₉)₄]⁻, which is a surprisingly inert anion that might be used as a weakly coordinating anion (WCA) in the future. For [Cl(OC₄F₉)₂]⁻, the decomposition products of the synthetic approaches towards a chlorine(III) system were analyzed.     

Fluorocyclisation of Oximes to Isoxazolines Through I(I)/I(III) Catalysis

A regioselective fluorocyclisation of β,γ-unsaturated oximes through I(I)/I(III) catalysis is disclosed to generate 5-fluoromethylated isoxazolines. The transformation leverages p-iodotoluene as an inexpensive catalyst, Selectfluor® as the terminal oxidant and an amine⋅HF complex (1 : 7.5) as both the fluoride and Brønsted acid source. The λ³-iodane p-TolIF₂, which is generated in situ, engages the pendant alkene of the substrate to facilitate a cyclisation/fluorination sequence. A range of 5-fluoromethyl isoxazolines can be generated using this method, including aliphatic and aromatic systems (up to 56 % yield). Single crystal X-ray analysis of a representative example reveals a conformation that is consistent with the stereoelectronic gauche effect between the exocyclic C(sp³)−F bond and the C(sp³)−O of the isoxazoline (ϕ_OCCF=−62.0°).     

Real and Hypothetical Intermediate-Valence Ag(II)/Ag(III) and Ag(II)/Ag(I) Fluoride Systems as Potential Superconductors

With the aim of gauging their potential as conducting or superconducting materials, we examine the crystal structures and magnetic properties of the roughly one hundred binary, ternary, and quaternary Ag(II) and Ag(III) fluorides in the solid state reported up to date. The Ag(II) cation appears in these species usually in a distorted octahedral environment, either in an [AgF](+) infinite chain or as [AgF(2)] sheets. Sometimes one finds discrete square-planar [AgF(4)](2-) ions. The Ag(III) cation occurs usually in the form of isolated square-planar [AgF(4)](-) ions. Systems containing Ag(III) (d(8)) centers are typically diamagnetic. On the other hand, the rich spectrum of Ag(II) (d(9)) environments in binary and ternary fluorides leads to most diverse magnetic properties, ranging from paramagnetism, through temperature-independent paramagnetism (characteristic for half-filled band and metallic behavior) and antiferromagnetism, to weak ferromagnetism. Ag(II) and Ag(III) have the same d-electron count as Cu(II) (d(9)) and Cu(III) (d(8)), respectively. F(-) and O(2-) ions are isoelectronic, closed-shell (s(2)p(6)) species; both are weak-field ligands. Led by these similarities, and by some experimental evidence, we examine analogies between the superconducting cuprates (Cu(II)/Cu(III)-O(2-) and Cu(II)/Cu(I)-O(2-) systems) and the formally mixed-valence Ag(II)/Ag(III)-F(-) and Ag(II)/Ag(I)-F(-) phases. For this purpose we perform electronic-structure computations for a number of structurally characterized binary and ternary Ag(I), Ag(II), and Ag(III) fluorides and compare the results with similar calculations for oxocuprate superconductors. Electronic levels in the vicinity of the Fermi level (x(2)-y(2) or z(2)) have usually strongly mixed Ag(d)/F(p) character and are Ag-F antibonding, thus providing the potential of efficient vibronic coupling (typical for d(9) systems with substantially covalent bonds). According to our computations this is the result not only of a coincidence in orbital energies; surprisingly the Ag-F bonding is substantially covalent in Ag(II) and Ag(III) fluorides. The electron density of state at the Fermi level (DOS(F)) for silver fluoride materials and frequencies of the metal-ligand stretching modes have values close to those for copper oxides. The above features suggest that properly hole- or electron-doped Ag(II) fluorides might be good BCS-type superconductors. We analyze a comproportionation/disproportionation equilibrium in the hole-doped Ag(II) fluorides, and the possible appearance of holes in the F(p) band. It seems that there is a chance of generating an Ag(III)-F(-)/Ag(II)-F(0) "ionic/covalent" curve crossing in the hole-doped Ag(II)-F(-) fluorides, significantly increasing vibronic coupling.     

Copper(I)-Catalyzed Cross-Coupling of 1-Bromoalkynes with N-Heterocyclic Organozinc Reagents

Nitrogen-containing heterocycles represent the majority of FDA-approved small-molecule pharmaceuticals. Herein, we describe a synthetic method to produce saturated N-heterocyclic drug scaffolds with an internal alkyne for elaboration. The treatment of N,N-dimethylhydrazinoalkenes with Et₂Zn, followed by a Cu(I)-catalyzed cross-coupling with 1-bromoalkynes, results in piperidines and pyrrolidines with a good yield. Five examples are reported and a proposed mechanism for the Cu(I)-catalyzed cross-coupling is presented.     

Easy Access to the Copper(III) Anion [Cu(CF3)4]−

CuCl or pre‐generated CuCF₃ reacts with CF₃SiMe₃/KF in DMF in air to give [Cu(CF₃)₄]^? quantitatively. [PPN]⁺, [Me₄N]⁺, [Bu₄N]⁺, [PhCH₂NEt₃]⁺, and [Ph₄P]⁺ salts of [Cu(CF₃)₄]^? were prepared and isolated spectroscopically and analytically pure in 82–99 % yield. X‐ray structures of the [PPN]⁺, [Me₄N]⁺, [Bu₄N]⁺, and [Ph₄P]⁺ salts were determined. A new synthetic strategy with [Cu(CF₃)₄]^? was demonstrated, involving the removal of one CF₃^? from the Cu atom in the presence of an incoming ligand. A novel Cu^III complex [(bpy)Cu(CF₃)₃] was thus prepared and fully characterized, including by single‐crystal X‐ray diffraction. The bpy complex is highly fluxional in solution, the barrier to degenerate isomerization being only 2.3 kcal mol^?1. An NPA study reveals a huge difference in the charge on the Cu atom in [Cu(CR₃)₄]^? for R=F (+0.19) and R=H (+0.46), suggesting a higher electron density on Cu in the fluorinated complex.     

Enantioselective Synthesis of 3‐Fluorochromanes via Iodine(I)/Iodine(III) Catalysis

The chromane nucleus is common to a plenum of bioactive small molecules where it is frequently oxidized at position 3. Motivated by the importance of this position in conferring efficacy, and the prominence of bioisosterism in drug discovery, an iodine(I)/iodine(III) catalysis strategy to access enantioenriched 3‐fluorochromanes is disclosed (up to 7:93 e.r.). In situ generation of ArIF₂ enables the direct fluorocyclization of allyl phenyl ethers to generate novel scaffolds that manifest the stereoelectronic gauche effect. Mechanistic interrogation using deuterated probes confirms a stereospecific process consistent with a type II_inv pathway.     

Designing Cross-Coupling Reactions using Aryl(trialkyl)silanes

Organo(trialkyl)silanes have several advantages, including high stability, low toxicity, good solubility, easy handling, and ready availability compared with heteroatom-substituted silanes. However, methods for the cross-coupling of organo(trialkyl)silanes are limited, most probably because of their exceeding robustness. Thus, a practical method for the cross-coupling of organo(trialkyl)silanes has been a long-standing challenging research target. This article discusses how aryl(trialkyl)silanes can be used in cross-coupling reactions. A pioneering example is Cu^II catalytic conditions with the use of electron-accepting aryl- or heteroaryl(triethyl)silanes and aryl iodides. The reaction forms biaryls or teraryls. This design concept can be extended to Pd/Cu^II-catalyzed cross-coupling polymerization reactions between such silanes and aryl bromides or chlorides and to Cu^I-catalyzed alkylation using alkyl halides.     

Nickel-Catalyzed Cross-Coupling of Sulfonamides With (Hetero)aryl Chlorides

The development of Ni-catalyzed C−N cross-couplings of sulfonamides with (hetero)aryl chlorides is reported. These transformations, which were previously achievable only with Pd catalysis, are enabled by use of air-stable ( L )NiCl(o-tol) pre-catalysts (L= PhPAd-DalPhos and PAd2-DalPhos ), without photocatalysis. The collective scope of (pseudo)halide electrophiles (X=Cl, Br, I, OTs, and OC(O)NEt₂) demonstrated herein is unprecedented for any reported catalyst system for sulfonamide C−N cross-coupling (Pd, Cu, Ni, or other). Preliminary competition experiments and relevant coordination chemistry studies are also presented.     

Contiguous metal-mediated base pairs comprising two Ag(I) ions

The incorporation of transition‐metal ions into nucleic acids by using metal‐mediated base pairs has proved to be a promising strategy for the site‐specific functionalization of these biomolecules. We report herein the formation of Ag⁺‐mediated Hoogsteen‐type base pairs comprising 1,3‐dideaza‐2′‐deoxyadenosine and thymidine. By defunctionalizing the Watson–Crick edge of adenine, the formation of regular base pairs is prohibited. The additional substitution of the N3 nitrogen atom of adenine by a methine moiety increases the basicity of the exocyclic amino group. Hence, 1,3‐dideazaadenine and thymine are able to incorporate two Ag⁺ ions into their Hoogsteen‐type base pair (as compared with one Ag⁺ ion in base pairs with 1‐deazaadenine and thymine). We show by using a combination of experimental techniques (UV and circular dichroism (CD) spectroscopies, dynamic light scattering, and mass spectrometry) that this type of base pair is compatible with different sequence contexts and can be used contiguously in DNA double helices. The most stable duplexes were observed when using a sequence containing alternating purine and pyrimidine nucleosides. Dispersion‐corrected density functional theory calculations have been performed to provide insight into the structure, formation and stabilization of the twofold metalated base pair. They revealed that the metal ions within a base pair are separated by an Ag???Ag distance of about 2.88 Å. The Ag–Ag interaction contributes some 16 kcal mol^?1 to the overall stability of the doubly metal‐mediated base pair, with the dominant contribution to the Ag–Ag bonding resulting from a donor–acceptor interaction between silver 4d‐type and 4s orbitals. These Hoogsteen‐type base pairs enable a higher functionalization of nucleic acids with metal ions than previously reported metal‐mediated base pairs, thereby increasing the potential of DNA‐based nanotechnology.     

Synthesis of (1R)-1-(4-Bromophenyl)-2,2,2-trifluoroethan-1-amine Hydrochloride through Diastereoselective Trifluoromethylation of a Chiral Sulfinimine

An efficient three-step synthesis of (1R)-1-(4-bromophenyl)-2,2,2-trifluoroethan-1-amine hydrochloride ( 1 ) starting from inexpensive and readily available starting materials was developed. The sequence features a highly diastereoselective trifluoromethylation of a chiral sulfinimine using the Rupert–Prakash reagent TMSCF₃ in combination with K₃PO₄ as an initiator. The diastereomeric purity of the resulting sulfinamide was further improved by direct precipitation of the desired diastereomer from the reaction mixture upon addition of water. The chiral auxiliary was then removed under acidic conditions, resulting in the isolation of chiral benzylamine 1 as its hydrochloride salt in 71 % overall yield and excellent purity (LC/MS: >99 % a/a; e.r.=99 : 1).     

Electroprecipitation of Ag(II)/Ag(III) tetraphenylsulfonate porphyrin and electrocatalytic behavior of the films

The electrochemical precipitation on glassy carbon and gold electrodes of Ag(II) tetraphenylsulfonate porphyrin (Ag(II)TPPS) from aqueous HClO₄ solutions, is reported. Electrochemical quartz crystal microbalance (EQCM) results indicate the possible formation of an Ag(II)–Ag(III) porphyrin dimer species. This species is oxidized and reduced in two consecutive steps: oxidation at +0.31 and +0.36 V (vs. SCE) and reduction at +0.11 and +0.07 V. The films show catalytic behavior toward O₂ reduction in 10⁻² M HClO₄ at relatively low potentials (E<−0.1 V) but catalyze NO reduction at relatively high-reduction potentials (E<0.4 V). The electrochemical results seem to indicate that the catalytic cycle in the case of NO involves formation of Ag(II)TPPS–Ag(II)TPPS(NO)⁺ and its electroreduction to regenerate Ag(II)TPPS–Ag(III)TPPS and NO-reduction products.     

Forging Medium Rings via I(I)/I(III)-Catalyzed Diene Carbofunctionalization

A main-group catalysis-based strategy to access 8-membered carbocycles via the direct carbofunctionalization of 2-phenethyl-substituted 1,3-dienes is disclosed. Through the intervention of an I(I)/I(III) catalysis cycle, the synthesis of densely functionalized, fluorinated benzocyclooctenes can be achieved in an operationally simple manner. Modulating the oxidation/activation regime, and the external nucleophile, the process has been extended to unify the challenging cyclization with formation of allylic C−O, C−N, and C−C bonds (>30 examples). Derivatization of the product benzocyclooctenes is demonstrated together with X-ray conformational analysis, preliminary validation of enantioselective catalysis and a scalable resolution protocol.     

Structure and bonding of Ag(I)-DNA base complexes and Ag(I)-adenine-cytosine mispairs: an ab initio study

High level ab initio calculations have been carried out to characterize the structure, bonding and energetics of Ag(I)-DNA base complexes, including adenine or cytosine, as well as Ag(I)-adenine-cytosine mispairs. The interactions of the Ag cation in all binding sites of all adenine and cytosine tautomers have been considered. The calculations show that in gas phase the canonical form of cytosine is stabilized upon metalation, whereas the lowest energy structure of Ag-adenine correspond to a rare tautomer. Interestingly, the theoretical inspection of metalated adenine-cytosine mispair reveals that the most stable structures are formed from the canonical cytosine and adenine tautomers. The lowest energy structure is planar with adenine and cytosine hydrogen-bonded. Within few kcal/mol nonplanar, conformationally very flexible structures are found, in which the Ag(I) crosslinks an endocyclic nitrogen of adenine and the oxygen of cytosine. Metalated reverse-Wobble type of structures, on the contrary, are predicted much higher in energy.     

Denitrogenative Hydrotrifluoromethylation of Benzaldehyde Hydrazones: Synthesis of (2,2,2-Trifluoroethyl)arenes

Reacting hydrazones of arylaldehydes with Togni's CF₃-benziodoxolone reagent, in the presence of potassium hydroxide and cesium fluoride, induces a denitrogenative hydrotrifluoromethylation event to produce (2,2,2-trifluoroethyl)arenes. This novel reaction was tolerant to many electronically-diverse functional groups and substitution patterns, as well as naphthyl- and heteroaryl-derived substrates. Advantages of this process include the easy access to hydrazone precursors on a large scale, speed and operational simplicity, and being transition metal-free.