Low-bandgap conjugated polymers based on benzodipyrrolidone with reliable unipolar electron mobility exceeding 1 cm~2 V~(-1) s~(-1)

The employment of an intrinsic quinoidal building block, benzodipyrrolidone(BDP), on constructing conjugated polymers(PBDP-2F and PBDP-2CN) with high electron mobility and unipolar transport characteristic in polyethylenimine ethoxylated(PEIE) modified organic field-effect transistors(OFETs) is reported. The intrinsic quinoidal characteristic and excellent coplanarity of BDP can lower the lowest unoccupied molecular orbital(LUMO) levels and improve ordered interchain packing of the resulting polymers in solid states, which are favorable for electron-injection and transport. By using PEIE as the interlayer to block the hole injection, unipolar n-type transport characteristics with high electron mobility of 0.58 and 1.01 cm~2 V~(-1) s~(-1) were achieved by the OFETs based on PBDP-2F and PBDP-2CN, respectively. More importantly, the extracted mobilities are highly reliable with the reliability factor of above 80%. To the best of our knowledge, PBDP-2CN is the very first quinoid-based conjugated polymer with reliable electron mobility exceeding 1 cm~2 V~(-1) s~(-1). This work represents a significant step in exploring intrinsic quinoidal CPs for application in n-channel OFETs and logic complementary circuits.     

8.0% Efficient all-polymer solar cells based on novel starburst polymer acceptors

The polymer N2200, with its π-conjugated backbone composed of alternating naphthalene diimide(NDI) and bithiophene(DT)units, has been widely used as an acceptor for all-polymer solar cells(all-PSCs) owing to its high electron mobility and suitable ionization potential and electron affinity. Here, we developed two naphthalene diimide derivatives by modifying the molecular geometry of N2200 through the incorporation of a truxene unit as the core and NDI-DTas the branches. These starburst polymers exhibited absorption spectra and molecular orbital energy levels that were comparable to N2200. These copolymers were paired with the wide-bandgap polymer donor PTz BI-O to fabricate all-polymer solar cells(all-PSCs), which displayed impressive power conversion efficiencies up to 8.00%. The improved photovoltaic performances of all-PSCs based on these newly developed starburst acceptors can be ascribed to the combination of increased charge carrier mobilities, reduced bimolecular recombination, and formation of more favorable film morphology. These findings demonstrate that the construction of starburst polymer acceptors is a feasible strategy for the fabrication of high-performance all-PSCs.     

共轭高分子光电功能材料的多尺度性能研究——聚合物电子学领域中的新机遇

共轭高分子材料特异的金属或半导体的电子特性兼有质轻、价廉、易于加工的优点使其在有机场效应晶体管、有机太阳能电池和有机发光二极管等领域显示了重要的应用前景.然而,尽管经过几十年的不断研究,共轭高分子材料种类及其相关器件性能均已得到显著发展,但是共轭高分子材料的本征电荷传输特性仍不清楚,其研究面临巨大挑战,这主要是由共轭高分子材料本身分子量分布弥散、分子间相互缠结以及在常规旋涂薄膜器件中分子高度无序等特性所决定的.从调控共轭高分子聚集态结构的角度出发,不断提高共轭高分子的结构有序性及减小电荷传输过程中的晶界及缺陷密度,是实现共轭高分子材料本征性能认识的有效途径之一.本文首先简单归纳总结了研究者在共轭高分子多尺度聚集态结构调控及性能研究方面的初步结果,进一步结合国内外相关研究进展,重点对共轭高分子晶体方面的工作展开详细介绍,最后对该领域未来发展的挑战及机遇进行了简单评述.     

Novel polymer acceptors achieving 10.18% efficiency for all-polymer solar cells

Polymer acceptors based on extended fused ring p skeleton has been proven to be promising candidates for all-polymer solar cells(all-PSCs), due to their remarkable improved light absorption than the traditional imide-based polymer acceptors. To expand structural diversity of the polymer acceptors, herein,two polymer acceptors PSF-IDIC and PSi-IDIC with extended fused ring p skeleton are developed by copolymerization of 2,20-((2 Z,20 Z)-((4,4,9,9-tetrahexadecyl-4,9-dihydro-s-indaceno [1,2-b:5,6-b']dithio phene-2,7-diyl)bis(methanylylidene))bis(3-oxo-2,3-dihydro-1 H-indene-2,1-diylidene))dimalononitrile(IDIC-C16) block with sulfur(S) and fluorine(F) functionalized benzodithiophene(BDT) unit and silicon(Si) atom functionalized BDT unit, respectively. Both polymer acceptors exhibit strong light absorption.The PSF-IDIC exhibits similar energy levels and slightly higher absorption coefficient relative to the PSi-IDIC. After blended with the donor polymer PM6, the functional atoms on the polymer acceptors show quite different effect on the device performance. Both of the acceptors deliver a notably high open circuit voltage(V_OC) of the devices, but PSi-IDIC achieves higher V OCthan PSF-IDIC. All-PSC based on PM6:PSi-IDIC attains a power conversion efficiency(PCE) of 8.29%, while PM6:PSF-IDIC-based device achieves a much higher PCE of 10.18%, which is one of the highest values for the all-PSCs reported so far. The superior device performance of PM6:PSF-IDIC is attributed to its higher exciton dissociation and charge transport, decreased charge recombination, and optimized morphology than PM6:PSi-IDIC counterpart. These results suggest that optimizing the functional atoms of the side chain provide an effective strategy to develop high performance polymer acceptors for all-PSCs.     

萘酰亚胺-卟啉星型电子受体分子的构筑及其在非富勒烯太阳能电池中的应用

非富勒烯太阳能电池目前已经成为有机太阳能电池的研究热点,大量的共轭电子受体分子被开发,并成功应用到高性能光伏器件中。共轭分子作为非富勒烯电子受体,需要综合考虑吸收、能级、电子传输以及结晶性等,其中宽吸收光谱可以提高对太阳光谱的利用,是分子设计中重要因素之一。本工作中,我们设计一种新型电子受体分子,以卟啉为核、萘酰亚胺为端基以及炔为桥连基团。这种新型分子具有近红外的吸收光谱以及合适的能级。将一种具有吸收互补的共轭聚合物为电子给体,星型分子为电子受体应用到电池的活性层中,我们获得了1.8%的能量转换效率,电池的光谱响应为300–900 nm。实验结果证明了这种以卟啉为核的分子设计在实现近红外吸收的电子受体方面具有重要应用前景。     

Synthesis and properties of 3,4-dioxythiophene and 1,4-dialkoxybenzene based copolymers via direct C?H arylation: Dopant-free hole transport material for perovskite solar cells

Direct C H arylation coupling reaction has gained significant importance in synthesis of conjugated polymers for organic electronic applications. We report here a facile and straightforward method called “direct C H arylation” reaction to synthesize conjugated 3,4-dioxythiophene and 1,4-dialkoxybenzene based copolymers as hole transport material (HTM) for perovskite solar cells. Two electron-rich conjugated polymers P1-2 were synthesized, in which 1,4-dibromo-2,5-bis(dodecyloxy)benzene and 3,4-dialkoxy-thiophene units were used for polymerization. The resulting polymers were characterized and exhibited high solubility in organic solvents. Electrochemical and optical characterizations were carried out by cyclic voltammetry and UV–Vis–NIR absorption spectroscopy and found that these polymers show higher-lying HOMO energy levels with wide band gap. Density functional theory calculation was performed on these polymers ( P1-2 ) and correlated with our experimental results. Finally, perovskite solar cells were fabricated by solution-processable deposition of P1-2 as dopant-free HTM with device geometry ITO/SnO₂/Perovskite/HTM( P1 / P2 )/Ag and achieved a maximum power conversion efficiency of 5.28%. This study provides information on designing and simple preparation by direct C H arylation reaction of higher-lying HOMO energy level polymer as HTM for perovskite solar cells.     

High-performance all-polymer solar cells with only 0.47 eV energy loss

The field of all-polymer solar cells(all-PSCs) has experienced rapid development during the past few years, mainly driven by the development of efficient polymer acceptors. However, the power conversion efficiencies(PCEs) of the all-PSCs are still limited by insufficient light absorption of the donor/acceptor blend and large energy loss in devices. We herein designed a polymer acceptor PYT1 constructed n-type molecular acceptor Y5-C20 as the key building block and blended it with a polymer donor PM6 to obtain an all-polymer photoactive layer. The optimized PM6:PYT1 all-PSCs achieved a record higher PCE of 13.43% with a very low energy loss of 0.47 eV and a photoresponse of up to 900 nm compared with the Y5-C20 based device with a best PCE of 9.42%. Furthermore, the PCEs of the PM6:PYT1 all-PSCs are relatively insensitive to the 1-chloronaphthalene(CN)additive contents and active layer thickness. Our results also highlight the effect of CN additive on PM6:PYT1 morphology, i.e.,charge generation, and transport find an optimized balance, and radiative and non-radiative loss is simultaneously reduced in the blend. This work promotes the development of high-performance polymer acceptors and heralds a brighter future of all-PSCs for commercial applications.     

A homopolymer based on double B←N bridged bipyridine as electron acceptor for all-polymer solar cells

A homopolymer based on double B ← N bridged bipyridine was reported as a novel polymer electron acceptor. The resulting all-polymer solar cells show power conversion efficiencies of 2.44%–3.04%.     

11.2% Efficiency all-polymer solar cells with high open-circuit voltage

Herein,we fabricated all-polymer solar cells(all-PSCs)based on a fluorinated wide-bandgap p-type conjugated polymer PM6 as the donor,and a narrow bandgap n-type conjugated polymer PZ1 as the acceptor.In addition to the complementary absorption and matching energy levels,the optimized blend films possess high cystallinity,predominantly face-on stacking,and a suitable phase separated morphology.With this active layer,the devices exhibited a high V_(oc)of 0.96 V,a superior J_(sc)of 17.1 mA cm~(-2),a fine fill factor(FF)of 68.2%,and thus an excellent power conversion efficiency(PCE)of 11.2%,which is the highest value reported to date for single-junction all-PSCs.Furthermore,the devices showed good storage stability.After 80 d of storage in the N_2-filled glovebox,the PCE still remained over 90%of the original value.Large-area devices(1.1 cm~2)also demonstrated an outstanding performance with a PCE of 9.2%,among the highest values for the reported large-area all-PSCs.These results indicate that the PM6:PZ1 blend is a promising candidate for scale-up production of large area high-performance all-PSCs.     

Side-chain engineering of high-efficiency conjugated polymer photovoltaic materials

In recent years,conjugated polymers have attracted great attention in the application as photovoltaic donor materials in polymer solar cells(PSCs).Broad absorption,lower-energy bandgap,higher hole mobility,relatively lower HOMO energy levels,and higher solubility are important for the conjugated polymer donor materials to achieve high photovoltaic performance.Side-chain engineering plays a very important role in optimizing the physicochemical properties of the conjugated polymers.In this article,we review recent progress on the side-chain engineering of conjugated polymer donor materials,including the optimization of flexible side-chains for balancing solubility and intermolecular packing(aggregation),electron-withdrawing substituents for lowering HOMO energy levels,and two-dimension(2D)-conjugated polymers with conjugated side-chains for broadening absorption and enhancing hole mobility.After the molecular structural optimization by side-chain engineering,the2D-conjugated polymers based on benzodithiophene units demonstrated the best photovoltaic performance,with powerconversion efficiency higher than 9%.     

Conjugated Polymers as Hole Transporting Materials for Solar Cells

In principle, conjugated polymers can work as electron donors and thus as low-cost p-type organic semiconductors to transport holes in photovoltaic devices. With the booming interests in high-efficiency and low-cost solar cells to tackle global climate change and energy shortage, hole transporting materials(HTMs) based on conjugated polymers have received increasing attention in the past decade. In this perspective, recent advances in HTMs for a range of photovoltaic devices including dye-sensitized solar cells(DSSCs), perovskite solar cells(PSCs),and silicon(Si)/organic heterojunction solar cells(HSCs) are summarized and perspectives on their future development are also presented.     

Miscibility-Controlled Phase Separation in Double-Cable Conjugated Polymers for Single-Component Organic Solar Cells with Efficiencies over 8 %

A record power conversion efficiency of 8.40 % was obtained in single-component organic solar cells (SCOSCs) based on double-cable conjugated polymers. This is realized based on exciton separation playing the same role as charge transport in SCOSCs. Two double-cable conjugated polymers were designed with almost identical conjugated backbones and electron-withdrawing side units, but extra Cl atoms had different positions on the conjugated backbones. When Cl atoms were positioned at the main chains, the polymer formed the twist backbones, enabling better miscibility with the naphthalene diimide side units. This improves the interface contact between conjugated backbones and side units, resulting in efficient conversion of excitons into free charges. These findings reveal the importance of charge generation process in SCOSCs and suggest a strategy to improve this process: controlling miscibility between conjugated backbones and aromatic side units in double-cable conjugated polymers.     

Synthesis of Poly(benzothiadiazole‐co‐dithienobenzodithiophenes) and Effect of Thiophene Insertion for High‐Performance Polymer Solar Cells

We describe herein the synthesis of novel donor–acceptor conjugated polymers with dithienobenzodithiophenes (DTBDT) as the electron donor and 2,1,3‐benzothiadiazole as the electron acceptor for high‐performance organic photovoltaics (OPVs). We studied the effects of strategically inserting thiophene into the DTBDT as a substituent on the skeletal structure on the opto‐electronic performances of fabricated devices. From UV/Vis absorption, electrochemical, and field‐effect transistor analyses, we found that the thiophene‐containing DTBDT derivative can substantially increase the orbital overlap area between adjacent conjugated chains and thus dramatically enhance charge‐carrier mobility up to 0.55 cm² V^?1 s^?1. The outstanding charge‐transport characteristics of this polymer allowed the realization of high‐performance organic solar cells with a power conversion efficiency (PCE) of 5.1 %. Detailed studies on the morphological factors that enable the maximum PCE of the polymer solar cells are discussed along with a hole/electron mobility analysis based on the space‐charge‐limited current model.     

Conjugated polymers containing B←N unit as electron acceptors for all-polymer solar cells

Polymer electron acceptors are the key materials in all-polymer solar cells(all-PSCs).In this review,we focused on introducing the principle of boron-nitrogen coordination bond(B←N),and summarizing our recent research on polymer electron acceptors containing B←N unit for efficient all-PSC devices.Two approaches have been reported to design polymer electron acceptors using B←N unit.One is to replace a C-C unit by a B←N unit in conjugated polymers to transform a polymer electron donor to a polymer electron acceptor.The other approach is to construct novel electron-deficient building block based on B←N unit for polymer electron acceptors.The polymer electron acceptors containing B←N unit showed tunable lowest unoccupied molecular orbital(LUMO) energy levels and exhibited excellent all-PSC device performance with power conversion efficiency of exceeding6%.These results indicate that organic boron chemistry is a new toolbox to develop functional polymer materials for optoelectronic device applications.     

Molecular Engineering of Conjugated Acetylenic Polymers for Efficient Cocatalyst‐free Photoelectrochemical Water Reduction

Conjugated polymers featuring tunable band gaps/positions and tailored active centers, are attractive photoelectrode materials for water splitting. However, their exploration falls far behind their inorganic counterparts. Herein, we demonstrate a molecular engineering strategy for the tailoring aromatic units of conjugated acetylenic polymers from benzene‐ to thiophene‐based. The polarized thiophene‐based monomers of conjugated acetylenic polymers can largely extend the light absorption and promote charge separation/transport. The C≡C bonds are activated for catalyzing water reduction. Using on‐surface Glaser polycondensation, as‐fabricated poly(2,5‐diethynylthieno[3,2‐b]thiophene) on commercial Cu foam exhibits a record H₂‐evolution photocurrent density of 370 μA cm^?2 at 0.3 V vs. reversible hydrogen electrode among current cocatalyst‐free organic photocathodes (1–100 μA cm^?2). This approach to modulate the optical, charge transfer, and catalytic properties of conjugated polymers paves a critical way toward high‐activity organic photoelectrodes.     

Side-chains Engineering of Conjugated Polymers toward Additive-free Non-fullerene Organic Solar Cells

Side-chain engineering plays a significant role in the design of conjugated materials. In this work, a series of conjugated polymers PBDB-T-R with functionalized groups at the end of side units were developed as electron donor for organic solar cells(OSCs). The donor polymers PBDB-T-I and PBDB-T-OAc with iodine and acetate end groups exhibited similar absorption and energy levels, but showed much improved PCEs in OSCs compared to the polymer PBDB-T-H without substitutions at the end groups. Additionally, we found that PBDB-T-I and PBDB-T-OAc based cells exhibited optimized performance when using chloroform as solution-processed solvent without any additives. These results indicate that these conjugated polymers can act as self-additive to fabricate photoactive layers via solution process in OSCs.     

Synthesis of conjugated polymers with pendant ruthenium terpyridine trithiocyanato complexes and their applications in heterojunction photovoltaic cells

Two conjugated polymers based on poly(phenylenethiophene) and poly (fluorenethiophene) main chain functionalized with pendant trithiocyanato ruthenium terpyridine complexes were synthesized by the Suzuki coupling reaction. The ruthenium complexes can extend the absorption band to longer wavelength and enhance the photosensitivity in this region. The polymers exhibit very broad absorption band spanning from 400 to 750 nm due to the presence of π‐conjugated system and the ruthenium complexes. Such enhancement in optical absorption enables the utilization of solar light in the near IR region. By space charge limited current modeling, the hole carrier mobilities of the polymers were calculated to be in the order of 10^?4 cm² V^?1 s^?1, which greatly facilitate the transport of charges after the separation of excitons. Heterojunction photovoltaic cells with simple structure ITO/polymer/C₆₀/Al were fabricated. Under simulated AM1.5 solar light illumination, the short circuit currents, open circuit voltages, and power conversion efficiencies of the photovoltaic cells were measured to be 1.53–2.58 mA cm^?2, 0.12–0.24 V, and 0.084–0.12%, respectively. Deposition of PEDOT:PSS on ITO surface did not show significant difference in device performance. Plot of incident photon to charge efficiency as the function of wavelength suggests that absorption by both conjugated main chain and ruthenium complex are essential to the photocurrent generation. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1305–1317, 2008     

Benzodithiophene-Fused Perylene Bisimides as Electron Acceptors for Non-Fullerene Organic Solar Cells with High Open-Circuit Voltage

Tandem-junction organic solar cells require solar cells with visible light photo-response as front cells, in which an open-circuit voltage (V_oc) above 1.0 V is highly demanded. In this work, we are able to develop electron acceptors to fabricate non-fullerene organic solar cells (NFOSCs) with a very high V_oc of 1.14 V. This was realized by designing perylene bisimide (PBI)-based conjugated materials fused with benzodithiophene, in which Cl and S atom were introduced into the molecules in order to lower the frontier energy levels. The fused structures can reduce the aggregation of PBI unit and meanwhile maintain a good charge transport property. The new electron acceptors were applied into NFOSCs by using Cl and S substituted conjugated polymers as electron donor, in which an initial power conversion efficiency of 6.63 % and a high V_oc of 1.14 V could be obtained. The results demonstrate that the molecular design by incorporating Cl and S atom into electron acceptors has great potential to realize high performance NFOSCs.     

Polymer Acceptors for High-Performance All-Polymer Solar Cells

All-polymer solar cells (all-PSCs) have attracted considerable attention owing to their pronounced advantages of excellent mechanical flexibility/stretchability and greatly enhanced device stability as compared to other types of organic solar cells (OSCs). Thanks to the extensive research efforts dedicated to the development of polymer acceptors, all-PSCs have achieved remarkable improvement of photovoltaic performance, recently. This review summarizes the recent progress of polymer acceptors based on the key electron-deficient building blocks, which include bithiophene imide (BTI) derivatives, boron-nitrogen coordination bond (B←N)-incorporated (hetero)arenes, cyano-functionalized (hetero)arenes, and fused-ring electron acceptors (FREAs). In addition, single-component-based all-PSCs are also briefly discussed. The structure-property correlations of polymer acceptors are elaborated in detail. Finally, we offer our insights into the development of new electron-deficient building blocks with further optimized properties and the polymers built from them for efficient all-PSCs.     

Crystalline Conjugated Polymers for Organic Solar Cells: From Donor,Acceptor to Single‐Component

Organic solar cells have made rapid progress in the last two decades due to the innovation of conjugated materials and photovoltaic devices. Microphase separation that connects with materials and devices plays a crucial role in the charge generation process. In this account, we summary our recent works of developing new crystalline conjugated polymers to control the microphase separation in thin films in order to realize high performance in solar cells, including crystalline diketopyrrolopyrrole‐based donor polymers, perylene bisimide‐based electron acceptors, and “double‐cable” conjugated polymers that contain covalently‐linked crystalline donor and acceptor in one material for single‐component organic solar cells.