Facilely Tuning Porous NiCo2O4 Nanosheets with Metal Valence‐State Alteration and Abundant Oxygen Vacancies as Robust Electrocatalysts Towards Water Splitting

Great efforts in developing clean electrochemical water splitting technology leads to the rational design and synthesis of highly efficient oxygen evolution reaction (OER) catalysts with low overpotential and fast reaction kinetics. Herein, we focus on the role that morphology and composition play in the OER performance to rationally design freestanding 3D porous NiCo₂O₄ nanosheets with metal valence states alteration and abundant oxygen vacancies as robust electrocatalysts towards water splitting. Besides metal valence‐state alteration, surface modification regarding the evolution of oxygen vacancies is facilely realized upon the sodium borohydride treatment, which is beneficial for the enhanced OER performance. Taking advantage of the porous nanostructures and abundant surface activity sites with high reactivity, the resultant nanostructures exhibit excellent OER activity and stability in alkaline electrolytes that outperform that of pristine NiCo₂O₄ and commercial RuO₂, thus holding great potential for the water splitting.     

A Surface-Oxide-Rich Activation Layer (SOAL) on Ni2Mo3N for a Rapid and Durable Oxygen Evolution Reaction

The oxygen evolution reaction (OER) is key to renewable energy technologies such as water electrolysis and metal–air batteries. However, the multiple steps associated with proton-coupled electron transfer result in sluggish OER kinetics and catalysts are required. Here we demonstrate that a novel nitride, Ni₂Mo₃N, is a highly active OER catalyst that outperforms the benchmark material RuO₂. Ni₂Mo₃N exhibits a current density of 10 mA cm⁻² at a nominal overpotential of 270 mV in 0.1 m KOH with outstanding catalytic cyclability and durability. Structural characterization and computational studies reveal that the excellent activity stems from the formation of a surface-oxide-rich activation layer (SOAL). Secondary Mo atoms on the surface act as electron pumps that stabilize oxygen-containing species and facilitate the continuity of the reactions. This discovery will stimulate the further development of ternary nitrides with oxide surface layers as efficient OER catalysts for electrochemical energy devices.     

A Surface‐Oxide‐Rich Activation Layer (SOAL) on Ni2Mo3N for a Rapid and Durable Oxygen Evolution Reaction

The oxygen evolution reaction (OER) is key to renewable energy technologies such as water electrolysis and metal–air batteries. However, the multiple steps associated with proton‐coupled electron transfer result in sluggish OER kinetics and catalysts are required. Here we demonstrate that a novel nitride, Ni₂Mo₃N, is a highly active OER catalyst that outperforms the benchmark material RuO₂. Ni₂Mo₃N exhibits a current density of 10 mA cm^?2 at a nominal overpotential of 270 mV in 0.1 m KOH with outstanding catalytic cyclability and durability. Structural characterization and computational studies reveal that the excellent activity stems from the formation of a surface‐oxide‐rich activation layer (SOAL). Secondary Mo atoms on the surface act as electron pumps that stabilize oxygen‐containing species and facilitate the continuity of the reactions. This discovery will stimulate the further development of ternary nitrides with oxide surface layers as efficient OER catalysts for electrochemical energy devices.     

Low Ruthenium Content Confined on Boron Carbon Nitride as an Efficient and Stable Electrocatalyst for Acidic Oxygen Evolution Reaction

To date, only a few noble metal oxides exhibit the required efficiency and stability as oxygen evolution reaction (OER) catalysts under the acidic, high-voltage conditions that exist during proton exchange membrane water electrolysis (PEMWE). The high cost and scarcity of these catalysts hinder the large-scale application of PEMWE. Here, we report a novel OER electrocatalyst for OER comprised of uniformly dispersed Ru clusters confined on boron carbon nitride (BCN) support. Compared to RuO₂, our BCN-supported catalyst shows enhanced charge transfer. It displays a low overpotential of 164 mV at a current density of 10 mA cm⁻², suggesting its excellent OER catalytic activity. This catalyst was able to operate continuously for over 12 h under acidic conditions, whereas RuO₂ without any support fails in 1 h. Density functional theory (DFT) calculations confirm that the interaction between the N on BCN support and Ru clusters changes the adsorption capacity and reduces the OER energy barrier, which increases the electrocatalytic activity of Ru.     

Phase-Selective Syntheses of Cobalt Telluride Nanofleeces for Efficient Oxygen Evolution Catalysts

Cobalt-based nanomaterials have been intensively explored as promising noble-metal-free oxygen evolution reaction (OER) electrocatalysts. Herein, we report phase-selective syntheses of novel hierarchical CoTe₂ and CoTe nanofleeces for efficient OER catalysts. The CoTe₂ nanofleeces exhibited excellent electrocatalytic activity and stablity for OER in alkaline media. The CoTe₂ catalyst exhibited superior OER activity compared to the CoTe catalyst, which is comparable to the state-of-the-art RuO₂ catalyst. Density functional theory calculations showed that the binding strength and lateral interaction of the reaction intermediates on CoTe₂ and CoTe are essential for determining the overpotential required under different conditions. This study provides valuable insights for the rational design of noble-metal-free OER catalysts with high performance and low cost by use of Co-based chalcogenides.     

Phase‐Selective Syntheses of Cobalt Telluride Nanofleeces for Efficient Oxygen Evolution Catalysts

Cobalt‐based nanomaterials have been intensively explored as promising noble‐metal‐free oxygen evolution reaction (OER) electrocatalysts. Herein, we report phase‐selective syntheses of novel hierarchical CoTe₂ and CoTe nanofleeces for efficient OER catalysts. The CoTe₂ nanofleeces exhibited excellent electrocatalytic activity and stablity for OER in alkaline media. The CoTe₂ catalyst exhibited superior OER activity compared to the CoTe catalyst, which is comparable to the state‐of‐the‐art RuO₂ catalyst. Density functional theory calculations showed that the binding strength and lateral interaction of the reaction intermediates on CoTe₂ and CoTe are essential for determining the overpotential required under different conditions. This study provides valuable insights for the rational design of noble‐metal‐free OER catalysts with high performance and low cost by use of Co‐based chalcogenides.     

Laser-Ablation-Produced Cobalt Nickel Phosphate with High-Valence Nickel Ions as an Active Catalyst for the Oxygen Evolution Reaction

Cost-effective, highly efficient and stable non-noble metal-based catalysts for the oxygen evolution reaction (OER) are very crucial for energy storage and conversion. Here, an amorphous cobalt nickel phosphate (CoNiPO₄), containing a considerable amount of high-valence Ni³⁺ species as an efficient electrocatalyst for OER in alkaline solution, is reported. The catalyst was converted from Co-doped Ni₂P through pulsed laser ablation in liquid (PLAL) and exhibits a large specific surface area of 162.5 m² g⁻¹ and a low overpotential of 238 mV at 10 mA cm⁻² with a Tafel slope of 46 mV dec⁻¹, which is much lower than those of commercial RuO₂ and IrO₂. This work demonstrates that PLAL is a powerful technology for generating amorphous CoNiPO₄ with high-valence Ni³⁺, thus paving a new way towards highly effective OER catalysts.     

Surface Modulation of Iron-doped MoS2 Nanosheets by Phytic Acid for Enhanced Water Oxidation

Surface modulation and heteroatom doping are important approaches for boosting the electrocatalytic performances of MoS₂ nanosheets. As a molecular electrocatalyst, the natural organic phytic acid (PA) offer attractive intermediate for oxygen evolution reaction (OER). Here, a surface modulation strategy is demonstrated through the decoration of PA onto the basal plane of iron (Fe)-doped MoS₂ nanosheets supported on nickel foam (NF) for boosted OER activity. Experimental results indicate that the PA modification and Fe doping could effectively boost the charge transfer and mass transport during the OER process. Specially, PA2-Fe−MoS₂ grown on NF (PA2-Fe−MoS₂/NF) exhibits excellent OER activity (218 mV@20 mA cm⁻²) and durability, even superior to RuO₂ and many other previously reported OER catalysts. This natural organic molecule modification provides a facile strategy to designing low-cost and efficient electrocatalytic materials.     

In Situ Transformation of Prussian-Blue Analogue-Derived Bimetallic Carbide Nanocubes by Water Oxidation: Applications for Energy Storage and Conversion

Using bimetallic Prussian blue analogue (PBA) as a precursor is effective for preparing electrocatalysts for the oxygen evolution reaction (OER); however, the role of these PBA-derived catalysts in the OER is still ambiguous. Herein, by simply controlling synthesis temperature, a bimetallic PBA-derived O,N-codoped Ni–Fe carbide, can be well tuned to optimize structure and OER performance. Importantly, by a series of ex situ and in situ investigations, real active species of NiFeO_xH_y are in situ formed on the surface during the OER, which reveals a “pre-catalyst” role of O,N-codoped Ni–Fe carbides. Furthermore, it has been successfully applied to highly efficient Zn–air batteries and outplays its RuO₂ counterpart. When applied to photoelectrocatalytic water oxidation as the co-catalyst, it improves the performance of the BiVO₄ photoanode by enhancing hole collecting and transporting ability. We believe this research not only provides a highly efficient and low-cost electrocatalyst for the OER, but also unveils the “pre-catalyst” role of PBA-derived materials in energy-storage and conversion devices.     

Activating P2-NaxCoO2 for efficient water oxidation catalysis via controlled chemical oxidation

Electrocatalytic water oxidation is critically important for a wide range of emerging energy conversion devices. Co-based metal oxides are very promising candidates as high-performance oxygen evolution reaction (OER) catalysts. Here, it is shown that chemical oxidation of layered P2-Na_xCoO₂ could lead to compositionally tunable P2-Na_xCoO₂ with high OER activity. The optimal electrocatalytic activity emerges in a narrow range of sodium concentrations with Na_0·28CoO₂ exhibiting the lowest overpotential of 350 mV at 10 mA/cm² and a Tafel slope of 29 mV/dec in 0.1 M NaOH electrolyte, outperforming the benchmark RuO₂ catalyst and previous LiCoO₂-based electrocatalysts. Electrochemical measurements and X-ray spectroscopic investigations reveal that chemically oxidized P2-Na_xCoO₂ catalysts are intrinsically active toward OER, arising from the abundant oxygen vacancies, increased Co-O covalency, and enhanced conductivity after deintercalation of the Na⁺. Our findings provide new insights into the design and synthesis of cost-effective catalysts toward efficient and durable OER.     

Active Electron Density Modulation of Co3O4-Based Catalysts Enhances their Oxygen Evolution Performance

Despite the fact that many strategies have been developed to improve the efficiency of the oxygen evolution reaction (OER), the precise modulation of the surface electronic properties of catalysts to improve their catalytic activity is still challenging. Herein, we demonstrate that the surface active electron density of Co₃O₄ can be effectively regulated by an argon-ion irradiation method. X-ray photoelectron and synchrotron x-ray absorption spectroscopy, UV photoelectron spectrometry, and DFT calculations show that the surface active electron density band center of Co₃O₄ has been upshifted, leading to a significantly enhanced absorption capability of the oxo group. The optimized Co₃O₄-based catalysts exhibit an excellent overpotential of 260 mV at 10 mA cm⁻² and Tafel slope of 54 mV dec⁻¹, superior to the capability of the benchmark RuO₂, representing one of the best Co-based OER catalysts. This approach could guide the future rational design and discovery of ideal electrocatalysts.     

In-Situ Generated Trimetallic Molybdate Nanoflowers on Ni Foam Assisted with Microwave for Highly Enhanced Oxygen Evolution Reaction

Oxygen evolution reaction (OER) is considered as a critical half-cell reaction of water splitting, the kinetics of which is sluggish even not favored, thus requiring highly active electrocatalysts to shrink the reaction energy barrier and improve the energy conversion efficiency. In this study, In-situ generated trimetallic molybdate nanoflowers on Ni foam by a straightforward and time-saving solvothermal method assisted with microwave, not only bring synergistic effect into full play between multiple metals, but also construct a well-defined nanoflower-like structure accompanied by larger specific area (273.3 m² g⁻¹) and smaller size than the pristine NiMoO₄. The resulting Ni_0.9Al_0.1MoO₄-NF requires a relatively low overpotential of 266 mV for OER at 10 mA cm⁻², which outperforms commercial RuO₂ catalysts (274 mV). Such excellent performance compares favorably to most previously reported NiMoO₄-based electrocatalysts for OER. This work not only supplies a facile method to construct a well-defined nanoflower-like structure on foam, but also broadens our horizons into the mechanism of OER in alkaline conditions.     

Active Electron Density Modulation of Co3O4‐Based Catalysts Enhances their Oxygen Evolution Performance

Despite the fact that many strategies have been developed to improve the efficiency of the oxygen evolution reaction (OER), the precise modulation of the surface electronic properties of catalysts to improve their catalytic activity is still challenging. Herein, we demonstrate that the surface active electron density of Co₃O₄ can be effectively regulated by an argon‐ion irradiation method. X‐ray photoelectron and synchrotron x‐ray absorption spectroscopy, UV photoelectron spectrometry, and DFT calculations show that the surface active electron density band center of Co₃O₄ has been upshifted, leading to a significantly enhanced absorption capability of the oxo group. The optimized Co₃O₄‐based catalysts exhibit an excellent overpotential of 260 mV at 10 mA cm^?2 and Tafel slope of 54 mV dec^?1, superior to the capability of the benchmark RuO₂, representing one of the best Co‐based OER catalysts. This approach could guide the future rational design and discovery of ideal electrocatalysts.     

Controllable Synthesis of Fe-Doped NiCo2O4 Nanobelts as Superior Catalysts for Oxygen Evolution Reaction

As one of the promising clean and renewable technologies, water splitting has been a hot topic, especially the half-reaction of oxygen evolution reaction (OER) due to its sluggish and complex kinetics. Hence, Fe-doped NiCo₂O₄ nanobelts were designed and prepared as catalysts toward OER. By increasing the Fe amount, the catalytic performances of the as-synthesized products went up and then decreased. Profiting from the synergistic effect between Fe atom and NiCo₂O₄, all the Fe-NiCo₂O₄ catalysts exhibited superior catalytic activities to the corresponding NiCo₂O₄. In addition, the characteristic nanobelt architecture facilitates the conduction of electrons and the exposure of active sites. With the optimal Fe content, the 9.1 % Fe-NiCo₂O₄ yielded the smallest overpotential and Tafel slope among the catalysts, distinctly lower than that of RuO₂.     

Controlling Selectivity in the Chlorine Evolution Reaction over RuO2‐Based Catalysts

In the industrially important Chlor‐Alkali process, the chlorine evolution reaction (CER) over a ruthenium dioxide (RuO₂) catalyst competes with the oxygen evolution reaction (OER). This selectivity issue is elucidated on the microscopic level with the single‐crystalline model electrode RuO₂(110) by employing density functional theory (DFT) calculations in combination with the concept of volcano plots. We demonstrate that one monolayer of TiO₂(110) supported on RuO₂(110) enhances the selectivity towards the CER by several orders of magnitudes, while preserving the high activity for the CER. This win‐win situation is attributed to the different slopes of the volcano curves for the CER and OER.     

ZnO-Templated Selenized and Phosphorized Cobalt-Nickel Oxide Microcubes as Rapid Alkaline Water Oxidation Electrocatalysts

Oxygen electrocatalysis is of remarkable significance for electrochemical energy storage and conversion technologies, together with fuel cells, metal-air batteries, and water splitting devices. Substituting noble metal-based electrocatalysts by decidedly effective and low-cost metal-based oxygen electrocatalysts is imperative for the commercial application of these technologies. Herein, a novel strategy is presented to fabricate selenized and phosphorized porous cobalt-nickel oxide microcubes by using a sacrificial ZnO spherical template and the resulting microcubes are employed as an oxygen evolution reaction (OER) electrocatalyst. The selenized samples manifest desirable and robust OER performance, with comparable overpotential at 10 mA cm⁻² (312 mV) as RuO₂ (308 mV) and better activity when the current reaches 13.7 mA cm⁻². The phosphorized samples exhibit core–shell structure with low-crystalline oxides inside amorphous phosphides, which ensures superior activity than RuO₂ with the same overpotential (at 10 mA cm⁻²) yet lower Tafel slope. Such a surface doping method possibly will provide inspiration for engineering electrocatalysts applied in water oxidation.     

Improving the Electrocatalytic Activity of a Nickel-Organic Framework toward the Oxygen Evolution Reaction through Vanadium Doping

Metal-organic frameworks (MOFs) have been considered as potential oxygen evolution reaction (OER) electrocatalysts owning to their ultra-thin structure, adjustable composition, high surface area, and high porosity. Here, we designed and fabricated a vanadium-doped nickel organic framework (V_1−x−Ni_xMOF) system by using a facile two-step solvothermal method on nickel foam (NF). The doping of vanadium remarkably elevates the OER activity of V_1−x−Ni_xMOF, thus demonstrating better performance than the corresponding single metallic Ni-MOF, NiV-MOF and RuO₂ catalysts at high current density (>400 mA cm⁻²). V_0.09−Ni_0.91MOF/NF provides a low overpotential of 235 mV and a small Tafel slope of 30.3 mV dec⁻¹ at a current density of 10 mA cm⁻². More importantly, a water-splitting device assembled with Pt/C/NF and V_0.09−Ni_0.91MOF/NF as cathode and anode yielded a cell voltage of 1.96 V@1000 mA cm⁻², thereby outperforming the-state-of-the-art RuO₂⁽⁺⁾||Pt/C⁽⁻⁾. Our work sheds new insight on preparing stable, efficient OER electrocatalysts and a promising method for designing various MOF-based materials.     

Non‐3d Metal Modulation of a Cobalt Imidazolate Framework for Excellent Electrocatalytic Oxygen Evolution in Neutral Media

Cobalt imidazolate frameworks are classical electrocatalysts for the oxygen evolution reaction (OER) but suffer from the relatively low activity. Here, a non‐3d metal modulation strategy is presented for enhancing the OER activity of cobalt imidazolate frameworks. Two isomorphous frameworks [Co₄(MO₄)(eim)₆] (M=Mo or W, Heim=2‐ethylimidazole) having Co(eim)₃(MO₄) units and high water stabilities were designed and synthesized. In different neutral media, the Mo‐modulated framework coated on a glassy carbon electrode shows the best OER performances (1 mA cm^?2 at an overpotential of 210 mV in CO₂‐saturated 0.5 m KHCO₃ electrolyte and 2/10/22 mA cm^?2 at overpotential of 388/490/570 mV in phosphate buffer solution) among non‐precious metal catalysts and even outperforms RuO₂. Spectroscopic measurements and computational simulations revealed that the non‐3d metals modulate the electronic structure of Co for optimum reactant/product adsorption and tailor the energy of rate‐determining step to a more moderate value.     

Recent advances in oxygen electrocatalysts based on tunable structural polymers

Due to their high energy density, great safety and eco-friendliness, zinc-air batteries (ZABs) attract much attention. During the process of charging and discharging, the two key processes viz. oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) limit their efficiency. In general, the noble metal-based electrocatalysts (ORR: platinum (Pt); OER: iridium (IV) oxide [IrO₂] and ruthenium oxide [RuO₂]) have long been used. Nonetheless, these noble metal electrocatalysts also have their limitations owing to high cost and poor stability. As alternatives, polymers are found to be most promising on account of their tunable structure, uniform network, high surface morphology and strong durability. Polymers are capable catalysts. In this review, recent advances as well as insight into the architecture of covalent organic polymers (COPs), metal coordination polymers (MCPs) and pyrolysis-free polymers (PFPs) are duly outlined.     

Electrodeposition at Highly Negative Potentials of an Iron-Cobalt Oxide Catalyst for Use in Electrochemical Water Splitting

Earth-abundant transition metal-based catalysts have been extensively investigated for their applicability in water electrolysers to enable overall water splitting to produce clean hydrogen and oxygen. In this study a Fe−Co based catalyst is electrodeposited in 30 seconds under vigorous hydrogen evolution conditions to produce a high surface area material that is active for both the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER). This catalyst can achieve high current densities of 600 mAcm⁻² at an applied potential of 1.6 V (vs RHE) in 1 M NaOH with a Tafel slope value of 48 mV dec⁻¹ for the OER. In addition, the HER can be facilitated at current densities as high as 400 mA cm⁻² due to the large surface area of the material. The materials were found to be predominantly amorphous but did contain crystalline regions of CoFe₂O₄ which became more evident after the OER indicating interesting compositional and structural changes that occur to the catalyst after an electrocatalytic reaction. This rapid method of creating a bimetallic oxide electrode for both the HER and OER could possibly be adopted to other bimetallic oxide systems suitable for electrochemical water splitting.