Oxygen Functionalization of Hexagonal Boron Nitride on Ni(111)

The interaction of single-layer hexagonal boron nitride (h-BN) on Ni(111) with molecular oxygen from a supersonic molecular beam led to a covalently bonded molecular oxygen species, which was identified as being between a superoxide and a peroxide. This is a rare example of an activated adsorption process leading to a molecular adsorbate. The amount of oxygen functionalization depended on the kinetic energy of the molecular beam. For a kinetic energy of 0.7 eV, an oxygen coverage of 0.4 ML was found. Near-edge X-ray adsorption fine structure (NEXAFS) spectroscopy revealed a stronger bond of h-BN to the Ni(111) substrate in the presence of the covalently bound oxygen species. Oxygen adsorption also led to a shift of the valence bands to lower binding energies. Subsequent temperature-programmed X-ray photoelectron spectroscopy revealed that the oxygen boron bonds are stable up to approximately 580 K, when desorption, and simultaneously, etching of h-BN set in. The experimental results were substantiated by density functional theory calculations, which provided insight to the adsorption geometry, the adsorption energy and the reaction pathway.     

Bromine Adsorption and Thermal Stability on Rh(111): A Combined XPS,LEED and DFT Study

This study addresses a fundamental question in surface science: the adsorption of halogens on metal surfaces. Using synchrotron radiation-based high-resolution X-ray photoelectron spectroscopy (XPS), temperature-programmed XPS, low-energy electron diffraction (LEED) and density functional theory (DFT) calculations, we investigated the adsorption and thermal stability of bromine on Rh(111) in detail. The adsorption of elemental bromine on Rh(111) at 170 K was followed in situ by XPS in the Br 3d region, revealing two individual, coverage-dependent species, which we assign to fcc hollow- and bridge-bound atomic bromine. In addition, we find a significant shift in binding energy upon increasing coverage due to adsorbate-adsorbate interactions. Subsequent heating shows a high thermal stability of bromine on Rh(111) up to above 1000 K, indicating strong covalent bonding. To complement the XPS data, LEED was used to study the long-range order of bromine on Rh(111): we observe a (√3×√3)R30° structure for low coverages (≤0.33 ML) and a star-shaped compression structure for higher coverages (0.33–0.43 ML). Combining LEED and DFT calculations, we were able to visualize bromine adsorption on Rh(111) in real space for varying coverages.     

Reversible Hydrogenation of Graphene on Ni(111)—Synthesis of “Graphone”

Understanding the adsorption and reaction between hydrogen and graphene is of fundamental importance for developing graphene‐based concepts for hydrogen storage and for the chemical functionalization of graphene by hydrogenation. Recently, theoretical studies of single‐sided hydrogenated graphene, so called graphone, predicted it to be a promising semiconductor for applications in graphene‐based electronics. Here, we report on the synthesis of graphone bound to a Ni(111) surface. We investigate the formation process by X‐ray photoelectron spectroscopy (XPS), temperature‐programmed desorption (TPD), and density‐functional theory calculations, showing that the hydrogenation of graphene with atomic hydrogen indeed leads to graphone, that is, a hydrogen coverage of 1 ML (4.2 wt %). The dehydrogenation of graphone reveals complex desorption processes that are attributed to coverage‐dependent changes in the activation energies for the associative desorption of hydrogen as molecular H₂.     

Reactivity and Passivation of Fe Nanoclusters on h-BN/Rh(111)

The reactivity of iron nanocluster arrays on h-BN/Rh(111) was studied using in situ high-resolution X-ray photoelectron spectroscopy. The morphology and reactivity of the iron nanoclusters (Fe-NCs) were investigated by CO adsorption. On-top and hollow/edge sites were determined to be the available adsorption sites on the as-prepared Fe-NCs and CO dissociation was observed at 300 K. C- and O-precovered Fe-NCs showed no catalytic activity towards CO dissociation because the hollow/edge sites were blocked by the C and O atoms. Therefore, these adsorption sites were identified to be the most active sites of the Fe-NCs.     

Dewetting growth of crystalline water ice on a hydrogen saturated Rh(111) surface at 135 K

We investigated the water (D(2)O) adsorption at 135?K on a hydrogen pre-adsorbed Rh(111) surface using temperature programmed desorption and infrared reflection absorption spectroscopy (IRAS) in ultrahigh vacuum. With increasing the hydrogen coverage, the desorption temperature of water decreases. At the saturation coverage of hydrogen, dewetting growth of water ice was observed: large three-dimensional ice grains are formed. The activation energy of water desorption from the hydrogen-saturated Rh(111) surface is estimated to be 51 kJ/mol. The initial sticking probability of water decreases from 0.46 on the clean surface to 0.35 on the hydrogen-saturated surface. In IRAS measurements, D-down species were not observed on the hydrogen saturated surface. The present experimental results clearly show that a hydrophilic Rh(111) clean surface changes into a hydrophobic surface as a result of hydrogen adsorption.     

Development of novel graphene-like layered hexagonal boron nitride for adsorptive removal of antibiotic gatifloxacin from aqueous solution

Graphene-like layered hexagonal boron nitride (g-BN) was prepared and characterized. The performance of using g-BN as an adsorbent for removal of fluoroquinolone antibiotic gatifloxacin (GTF) from aqueous solution was evaluated. g-BN showed an excellent adsorption capability with notable GTF adsorption ratio of more than 90%. Data of equilibrium adsorption of GTF onto g-BN at different temperatures were represented by Langmuir, Freundlich and Tempkin isotherm models, and Langmuir exhibited the best fitting with the maximum adsorption capacity of 88.5 mg·g^?1 at 288 K. GTF adsorption was insignificantly affected by solution pH. Competitive role of Na⁺ and Ca²⁺ in the solution inhibited the adsorption of GTF and decreased the adsorption capacity a bit. The adsorption process was spontaneous and exothermic. The adsorption was probably governed by π–π interaction between GTF and g-BN, and electrostatic interaction may also exist in the adsorption process.     

Towards Adsorptive Enrichment of Flavonoids from Honey Using h-BN Monolayer

Density functional theory (DFT) was used to explore the possibility of h-BN monolayer acting as an adsorbent for the flavonoids. Four flavonoids named apigenin, kaempferol, myricetin, and quercetin as well as glucose (Glu) were selected as representatives of honey. DFT and ab initio molecular dynamics simulation results show that the four flavonoids interact with the h-BN monolayer much stronger than the Glu does in both vacuum and solutions, indicating a good adsorptive selectivity of the flavonoids over Glu. The interaction of the flavonoids and the Glu with water as well as the solvation energy of the flavonoids in water, methanol and ethanol was obtained using both the PBE-D and B3LYP-D functionals. It is shown that the h-BN monolayer can provide high selective adsorption of the flavonoids from bee honey and ethanol can be used as an elution solvent to recover the adsorbed flavonoids.     

Kinetic and geometric isotope effects originating from different adsorption potential energy surfaces: cyclohexane on Rh(111)

Novel isotope effects were observed in desorption kinetics and adsorption geometry of cyclohexane on Rh(111) by the use of infrared reflection absorption spectroscopy, temperature programmed desorption, photoelectron spectroscopy, and spot-profile-analysis low energy electron diffraction. The desorption energy of deuterated cyclohexane (C(6)D(12)) is lower than that of C(6)H(12). In addition, the work function change by adsorbed C(6)D(12) is smaller than that by adsorbed C(6)H(12). These results indicate that C(6)D(12) has a shallower adsorption potential than C(6)H(12) (vertical geometric isotope effect). The lateral geometric isotope effect was also observed in the two-dimensional cyclohexane superstructures as a result of the different repulsive interaction between interfacial dipoles. The observed isotope effects should be ascribed to the quantum nature of hydrogen involved in the C-H···metal interaction.     

复合光催化剂AgI/AgCl/h-BN的制备及光催化性能

以少层六方氮化硼纳米层状材料为载体,通过水溶性盐晶体模板法和离子交换法制备了h-BN稳定AgI/AgCl的三元复合体系。通过XRD、FT-IR、SEM、TEM等手段对样品的结构和形貌进行检测分析,利用UV-Vis DRS测试了样品的吸光性能。可见光光催化降解罗丹明B实验表明,光照24 min,AgI/AgCl/h-BN复合光催化材料对罗丹明B的降解率高达93%,远高于实验合成的大块AgCl、AgCl立方块、AgI/AgCl纳米腰果及文献报道的数值。并且三元材料循环利用4次后,对罗丹明B的降解率几乎保持不变。结合光电化学测试、活性物种捕获和电子自旋共振等实验结果,探讨了复合材料光催化活性和稳定性提高的机理。     

Carboxylated Hexagonal Boron Nitride/Graphene Configuration for Electrosynthesis of High-Concentration Neutral Hydrogen Peroxide

The electrosynthesis of hydrogen peroxide (H₂O₂) via two-electron (2e⁻) oxygen (O₂) reduction reaction (ORR) has great potential to replace the traditional energy-intensive anthraquinone process, but the design of low-cost and highly active and selective catalysts is greatly challenging for the long-term H₂O₂ production under industrial relevant current density, especially under neutral electrolytes. To address this issue, this work constructed a carboxylated hexagonal boron nitride/graphene (h-BN/G) heterojunction on the commercial activated carbon through the coupling of B, N co-doping with surface oxygen groups functionalization. The champion catalyst exhibited a high 2e⁻ ORR selectivity (>95 %), production rate (up to 13.4 mol g⁻¹ h⁻¹), and Faradaic efficiency (FE, >95 %). The long-term H₂O₂ production under the high current density of 100 mA cm⁻² caused the cumulative concentration as high as 2.1 wt %. The combination of in situ Raman spectra and theoretical calculation indicated that the carboxylated h-BN/G configuration promotes the adsorption of O₂ and the stabilization of the key intermediates, allowing a low energy barrier for the rate-determining step of HOOH* release from the active site and thus improving the 2e⁻ ORR performance. The fast dye degradation by using this electrochemical synthesized H₂O₂ further illustrated the promising practical application.     

NO在Cu(111)表面吸附和分解的XPS和TPD研究：不同氧物种的影响

利用X射线光电子能谱和程序升温脱附谱研究了NO在清洁和预吸附氧的Cu(111)表面上的吸附和反应.通过改变NO的暴露量和退火温度,在Cu(111)表面可以制备出不同种类的化学吸附氧物种,其O 1s的结合能分别位于531.0 eV (O₅₃₁)和529.7 eV (O₅₂₉).表面O₅₃₁物种的存在对NO的不同吸附状态有着显著影响,同时使得大部分NO吸附分子(NO(a))在加热过程中发生分解并以N₂O和N₂形式脱附; 而表面O₅₂₉物种对NO(a)的解离脱附有着明显的抑制作用.相对于O₅₃₁物种来说,O₅₂₉物种对NO吸附表现出更强的位阻效应.上述结果表明,NO在Cu(111) 表面的吸附和分解行为与预吸附氧物种的种类和覆盖度密切相关.     

CO and methanol adsorption on (2 × 1)Pt(110) and ion‐eroded Pt(111) model catalysts

Methanol adsorption on ion‐sputtered Pt(111) surface exhibiting high concentration of vacancy islands and on (2 × 1)Pt(110) single crystal were investigated by means of photoelectron spectroscopy (PES) and thermal desorption spectroscopy. The measurements showed that methanol adsorbed at low temperature on sputtered Pt(111) and on (2 × 1)Pt(110) surfaces decomposed upon heating. The PES data of methanol adsorption were compared to the data of CO adsorbed on the same Pt single crystal surfaces. In the case of the sputtered Pt(111) surface, the dehydrogenation of H_xCO intermediates is followed by the CO bond breakage. On the (2 × 1)Pt(110) surface, carbon monoxide, as product of methanol decomposition, desorbed molecularly without appearance of any traces of atomic carbon. By comparing both platinum surfaces we conclude that methanol decomposition occurs at higher temperature on sputtered Pt(111) than on (2 × 1)Pt(110). Copyright © 2010 John Wiley & Sons, Ltd.     

Voltammetric and radioactive labeling studies of single crystal and polycrystalline rhodium electrodes in sulfate-containing electrolytes

Adsorption of sulfate/bisulfate anions on single crystal Rh(111) (ordered/disordered) and polycrystalline rhodium electrodes in perchloric acid solution was studied by the use of cyclic voltammetry and the radioactive labeling method. The ordered Rh(111) surface was characterized by LEED and Auger spectroscopy to verify its well-defined character. Details of the surface chemistry of the anions interacting with the three rhodium substrates are different. This is considered as evidence that a long-range order of the metal electrodes alters the structure of chemisorbed hydrogen and oxygen significantly and that this structure is affected by the reversibly interacting species. Likewise, the adsorbed layer of sulfate anions on Rh(111) is more stable than that on other rhodium surfaces due to a favorable spatial configuration of the anions and surface water molecule network, which are proposed to be cross linked by hydrogen bonding. Overall, the adsorption reversibility of sulfate was confirmed with respect to the bulk concentration of the adsorbate and the electrode potential (provided that the surface oxidation is avoided). Radiochemical data reveal that, in the studied bulk concentration range (up to about 10⁻³ M), the uptake of anions by Rh(111) is limited to ca. 40% of the theoretical maximum coverage. The interaction of sulfate with Pt(111), and corresponding voltammetry in perchloric acid electrolyte are also brought into focus. It is concluded that only a part of the Pt(111) “butterfly” can be accounted for by adsorption of high energy hydrogen. No high energy hydrogen has been found to exist on Rh(111), as inferred earlier in our laboratory.     

复合光催化剂AgI/AgCl/h-BN的制备及光催化性能

以少层六方氮化硼纳米层状材料为载体,通过水溶性盐晶体模板法和离子交换法制备了h-BN稳定AgI/AgCl的三元复合体系。通过XRD、FT-IR、SEM、TEM等手段对样品的结构和形貌进行检测分析,利用UV-Vis DRS测试了样品的吸光性能。可见光光催化降解罗丹明B实验表明,光照24 min,AgI/AgCl/h-BN复合光催化材料对罗丹明B的降解率高达93%,远高于实验合成的大块AgCl、AgCl立方块、AgI/AgCl纳米腰果及文献报道的数值。并且三元材料循环利用4次后,对罗丹明B的降解率几乎保持不变。结合光电化学测试、活性物种捕获和电子自旋共振等实验结果,探讨了复合材料光催化活性和稳定性提高的机理。     

Initial oxidation of the Rh(110) surface: ordered adsorption and surface oxide structures

The initial oxidation of the Rh(110) surface was studied by scanning tunneling microscopy, core level spectroscopy, and density functional theory. The experiments were carried out exposing the Rh(110) surface to molecular or atomic oxygen at temperatures in the 500-700 K range. In molecular oxygen ambient, the oxidation terminates at oxygen coverage close to a monolayer with the formation of alternating islands of the (10x2) one-dimensional surface oxide and (2x1)p2mg adsorption phases. The use of atomic oxygen facilitates further oxidation until a structure with a c(2x4) periodicity develops. The experimental and theoretical results reveal that the c(2x4) structure is a "surface oxide" very similar to the hexagonal O-Rh-O trilayer structures formed on the Rh(111) and Rh(100) substrates. Some of the experimentally found adsorption phases appear unstable in the phase diagram predicted by thermodynamics, which might reflect kinetic hindrance. The structural details, core level spectra, and stability of the surface oxides formed on the three basal planes are compared with those of the bulk RhO2 and Rh2O3.     

Ethanol decomposition: C--C cleavage selectivity on Rh(111).

Ethanol adsorption, desorption and decomposition on Rh(111) have been studied by X-ray photoelectron spectroscopy and tem-perature-programmed desorption experiments. The evolution of the C is and O is core level spectra was monitored as a function of ethanol exposure and surface temperature. Ethanol adsorption at 90 K results in two nonequivalent ethanol-adsorbed species at low surface coverage, while a third species--related to multilayer formation--appears after longer exposures. Upon surface annealing, ethanol undergoes both desorption and dissociation, thus creating intermediate surface species which further decompose to hydrogen, carbon monoxide and atomic carbon. Our results clearly show that C--C bond cleavage is the preferential dissociation channel, while C--O bond scission is not observed. Calculations performed within the framework of the unity bond index-quadratic exponent potential model, have been used to test and compare different competing dissociation channels, providing an estimate of adsorption energies and dissociation barriers.     

Transition-metal-centered nine-membered boron rings: MⓒB9 and MⓒB9(-) (M = Rh, Ir)

We report the observation of two transition-metal-centered nine-atom boron rings, Rh?B(9)(-) and Ir?B(9)(-). These two doped-boron clusters are produced in a laser-vaporization supersonic molecular beam and characterized by photoelectron spectroscopy and ab initio calculations. Large HOMO-LUMO gaps are observed in the anion photoelectron spectra, suggesting that neutral Rh?B(9) and Ir?B(9) are highly stable, closed shell species. Theoretical calculations show that Rh?B(9) and Ir?B(9) are of D(9h) symmetry. Chemical bonding analyses reveal that these complexes are doubly aromatic, each with six completely delocalized π and σ electrons, which describe the bonding between the central metal atom and the boron ring. This work establishes firmly the metal-doped B rings as a new class of novel aromatic molecular wheels.     

甲酸在Au（997）台阶表面的氧化反应

金催化是纳米催化的代表性体系之一,但对金催化作用的理解还存在争议,特别是金颗粒尺寸对其催化作用的影响.金颗粒尺寸减小导致的表面结构主要变化之一是表面配位不饱和金原子密度的增加,因此研究金原子配位结构对其催化作用的影响对于理解金催化作用尺寸依赖性具有重要意义.具有不同配位结构的金颗粒表面可以利用金台阶单晶表面来模拟.我们研究组以同时具有Au(111)平台和Au(111)台阶的Au(997)台阶表面为模型表面,发现Au(111)台阶原子在CO氧化、NO氧化和NO分解反应中表现出与Au(111)平台原子不同的催化性能.负载型Au颗粒催化甲酸氧化反应是重要的Au催化反应之一.本文利用程序升温脱附/反应谱(TDS/TPRS)和X射线光电子能谱(XPS)研究了甲酸在清洁的和原子氧覆盖的Au(997)表面的吸附和氧化反应,观察到Au(111)台阶原子和Au(111)平台原子不同的催化甲酸根氧化反应行为.与甲酸根强相互作用的Au(111)台阶原子表现出比与甲酸根弱相互作用的Au(111)平台原子更高的催化甲酸根与原子氧发生氧化反应的反应活化能.在清洁Au(997)表面,甲酸分子发生可逆的分子吸附和脱附.甲酸分子在Au(111)台阶原子的吸附强于在Au(111)平台原子的吸附. TDS结果表明,吸附在Au(111)台阶原子的甲酸分子的脱附温度在190 K,吸附在Au(111)平台原子的甲酸分子的
　　脱附温度在170 K. XPS结果表明,分子吸附甲酸的C 1s和O 1s结合能分别位于289.1和532.8 eV.利用多层NO2的分解反应在Au(997)表面控制制备具有不同原子氧吸附位和覆盖度的原子氧覆盖Au(997)表面,包括氧原子吸附在(111)台阶位的0.02 ML-O(a)/Au(997)、氧原子同时吸附在(111)台阶位和(111)平台位的0.12 ML-O(a)/Au(997)、氧原子和氧岛吸附在(111)平台位和氧原子吸附在(111)台阶位的0.26 ML-O(a)/Au(997). TPRS和XPS结果表明,甲酸分子在105 K与Au(997)表面原子氧物种反应生成甲酸根和羟基物种,但甲酸根物种的进一步氧化反应依赖于Au原子配位结构和各种表面物种的相对覆盖度.在0.02 ML-O(a)/Au(997)表面暴露0.5 L甲酸时, Au(111)台阶位氧原子完全反应,甲酸过量.表面物种是Au(111)台阶位吸附的甲酸根、羟基和甲酸分子.在加热过程中,甲酸分子与羟基在181 K反应生成甲酸根和气相水分子(HCOOH(a)+ OH(a)= H2O + HCOO(a)),甲酸根在340 K发生歧化反应生成气相HCOOH和CO2分子(2HCOO(a)= CO2+ HCOOH).在0.12 ML-O(a)/Au(997)和0.26 ML-O(a)/Au(997)表面暴露0.5 L甲酸时,甲酸分子完全反应,原子氧过量.表面物种是Au(111)平台位和Au(111)台阶位吸附的甲酸根、羟基和原子氧.在加热过程中, Au(111)平台位和Au(111)台阶位的甲酸根分别在309和340 K同时发生氧化反应(HCOO(a)+ O(a)= H2O + CO2)和歧化反应(2HCOO(a)= CO2+ HCOOH)生成气相CO2, H2O和HCOOH分子.在0.26 ML-O(a)/Au(997)表面暴露10 L甲酸时,甲酸分子和原子氧均未完全消耗.表面物种是Au(111)平台位和Au(111)台阶位吸附的甲酸根、羟基、甲酸分子和原子氧.在加热过程中,除了上述甲酸根的氧化反应和歧化反应,还发生171 K的甲酸分子与羟基的反应(HCOOH(a)+ OH(a)= H2O + HCOO(a))和216 K的羟基并和反应(OH(a)+ OH(a)= H2O + O(a)).     

A simple and green route to transparent boron nitride/PVA nanocomposites with significantly improved mechanical and thermal properties

A simple and green method is developed to prepare hexagonal boron nitride(h-BN)/poly(vinyl alcohol) (PVA) nanocomposites by using water as a common solvent of h-BN nanosheets and PVA.The obtained h-BN/PVA nanocomposites are highly transparent,and have significantly improved mechanical and thermal properties.They may outperform nano-clay and nano-alumina/PVA nanocomposites as flexible optoelectronic devices,optical windows and heat-releasing materials operated in oxidative or corrosive environment.     

X-ray spectroscopic study of the electronic structure of boron carbonitride films obtained by chemical vapor deposition on Co/Si and CoO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>/Si substrates

Boron carbonitride films are synthesized by chemical vapor deposition from a mixture of triethylamine borane and ammonia on a metallic or oxidized cobalt sublayer sprayed over Si(100) substrates. Scanning electron microscopy shows that the surface of a BC _x N _y /Co/Si sample has a homogeneous fine-grained structure; filamentous entities are found on the surface of the BC _x N _y /CoO _x /Si sample. The electronic structure of the films is investigated by X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine structure spectroscopy (NEXAFS). An analysis of the spectra shows that BC _x N _y films are composed of graphite and hexagonal boron nitride (h-BN) regions and complex BC _x N _y O _z components with B-C, N-C, B-O, N-O, and C-O bonds. The deposition of the BC _x N _y film on the oxidized Co sublayer results in an increase in the number of C-O, N-O, B-O, and C-N bonds and a decrease of the graphite and h-BN components and in the number of C-B bonds. The XPS data are used to estimate the surface elemental composition of the BC _x N _y /CoO _x /Si sample. It is found that the film consists of 66 at.% graphite component and 3 at.% h-BN; the proportion of complex C_0.46B_0.11N_0.05O_0.38 components is 31 at.%.